PocketShield - General Topics

Anyone tried the new PocketShield 3 ? Very lite, power consumption excellent and very quick pop up of the slide to answer (compared to S2U2), and a lot of other very interresting features.
And if someone feels like it, we need nice themes for this one !

I haven´t tried it but it looks very impressive.

I tried it on my Touch Pro 2, but it does not work. I never see any locking, no 'screensaver' and it drains battery.
So I removed the program, but still my device drains battery power. In half a night the battery is exhausted!!
This is due to this program, because it's the only one I installed after some time.
Unfortunately I have no backjup, so a hard reset and reinstalling everything is needed - thanks, pocketshield!

Bright.Light said:
I tried it on my Touch Pro 2, but it does not work. I never see any locking, no 'screensaver' and it drains battery.
So I removed the program, but still my device drains battery power. In half a night the battery is exhausted!!
This is due to this program, because it's the only one I installed after some time.
Unfortunately I have no backjup, so a hard reset and reinstalling everything is needed - thanks, pocketshield!
Click to expand...
Click to collapse
I dought very much that it's csused by it.....it's made to be lite and not consume energy..

Well, as you stated here, you uninstalled PocketShield and battery drain persisted:
Bright.Light said:
I tried pocketshield 3.0, but it drains battery and I don't see anything being locked (though it is locked sometimes)
Uninstalled the program but still my battery drains rapidly, using 450mA all the time
Click to expand...
Click to collapse
Screen lock applications are always the first "suspects" on battery drain issues, but is not the case of PocketShield. If you continue experiencing that and you can isolate the cause to Pocketshield then this can help.

PocketShield 3 is AWESOME
I tried PocketShield 2 for my HTC Fuze and it didn't work well. I have since upgraded my phone (HTC Tilt2) and tried PocketShield 3 and it is an AWESOME application - just what the Tilt needed! Saves me from calling everyone and accidently answering calls.
Check it out at www(dot)pocketshield(dot)net!
What’s new?
- PIN lock for screen and keys locking
- New action screen and config options
- New swipe screen to unlock
- Agenda information on screen possible
- Sleep option (disable locking for an specified period of time)
- Enhanced notifications and notification booster
- Enhanced graphics
- New skinning capabilities (for new generation skins)
- Switch option for light/proximity use
- Improved proximity unlock behavior on TP2
- New option for light/proximity auto unlock “Only if no new notifications on screen”
- Auto activation after upgrading via Settings > ^ > Check for updates
- Overall improvements and fixed issues.
WE NEED SKINS.

New version 3.3 with lots of skins!
http://www.pocketshield.net/skins
JDB gave me this 33% off coupon I can share, http://www.pocketshield.net/activate.aspx?coupon=2334594 (will last some days)

i will be happy if pocketshield can do landcape..

Good Program
I can recommend Pocketshield.I was using s2u2,but I kept getting problems with it and had to keep reinstalling,I gave up with it,as no solution to the problems.I was happy to pay just over £6 for this as it works well.Thanks for the discount link

Nice program, i use it since 2 month and it worth the price. Interesting with the proximity sensor on HD2, nice skin, weekly update.

Related

TodayScreen which monitors the time how long my PPC charges?

Does anybody know if there is a Today Screen plugin which monitors the charging uptime?
History for my question:
I changed my car and the new Board Computer (BC) doesn't show the time from starting the engine (my previous car BC did it). It was a nice feature and so I thought this could be done by my PocketPC (MDAc) starting the uptime clock when I put it into my active Brodit holder in my car....
You could try this
You could try this software.
Looks good. Will try it. Thanx for your quick response.
I could find any setting in this application to start the clock when charging. Only reset the counter to zero when charging.
Any other apps?
No software available for my request?
sounds like a pretty specific program you want
maybe you should have somebody custom make it for you
seemed to be so.
but is a today screen which displays the charging time such a special thing?
donno never heard about it before
nor have i ever wanted for it before
Contactor-E - it could be written easily enough, but I'm afraid I have no time right now, setting up my website and finishing off another ton of stuff for you guys.
I assume that someone's written one, but I really can't think of one...
V
I will try to start programming my application...
I'll report here about my success.
Some of what you want may be displayed with Beemer's TodayWarrior:
http://personales.ya.com/beemer/todaywarrior1.htm
There are various toggle icons that show: battery %, elapsed time from last charge, charging, estimated remaining battery time, time to 100% charge, battery volts, current (mA), consumption (mW), temperature. There are also icons for power off, always on, etc.
However, I had problems with its WiFi monitoring side (this can be disabled). It would detect the WLAN, but then hang the application and Xda Exec. The extra WiFiKnife utility didn't work, however, my problems may have been because I ran it from SD-card - haven't had time to test further.
Thank you, but TodayWarrior does not support showing the charging time. Only "Charging" is displayed when connected on power.
here's one
it shows the charging time as well as the time running on batteries. also shows battery indicator and device active time (time the device is turned ON and not sleeping).
it can hide or change its size when running on batteries/charging to save screen space.
you can customize it separately for charging/batteries
see screen shorts
have fun.
edited:
CAB file removed, get the newer one below
Re: here's one
Slight slip up here, this file is actually a RAR-archive and NOT a ZIP-archive. After downloading it, rename the extension from .zip to .rar.
Re: here's one
astage said:
Slight slip up here, this file is actually a RAR-archive and NOT a ZIP-archive. After downloading it, rename the extension from .zip to .rar.
Click to expand...
Click to collapse
thanks, RAR did what I told it to do and not what I wanted it to do
Tried this on Windows Mobile 5, on the O2 Exec (Universal), and couldn't get it to do anything at all.
Hi zfiser!
Works GREAT !!!!!!!!!!! on my MDA compact !!!!
Wow!!!!!!!
Just installed but seems that this is the application I looked for!!!!!!!
Whrer did you find this app? Did you program it?
Do you know what the plugin number is for?
Thanks again!!!
Yes Works great on my Qtek 9100 under WM 5.0
Thanks for this app
The plugin number is to indicate the height you want for the plugin on the today page.
UPDATE
all right guys, since actually 3 people got it and 2 even got it working, I decided to spent some more hours on it. it's quite fun actually.
so, what is new?
1) AUTOSIZE - the plugin automatically decides its height based on your setting. You can still manually override it.
2) ACTUAL CHARGING TIME - now showing time it's plugged in to outlet and also time the battery was charged for. when the battery is fully charged the time stops and you can see how long it took to charge it.
3) ICONS! yea! I think that's pretty cool, saving you a lot of space on the screen while showing everything, plus it looks freaking awesome!
4) more options - the plug can turn itself to color red when the battery level falls under a certain percentage, set by you. now you can't overlook that your battery is almost dead
5) BUGFIXES, yea, that nasty bug not showing minutes, I noticed too, some minor tweaks
Checkout the screenshots! And have fun. And if you still miss something in this plugin (tetris, nude women, etc), let me know
IMPORTANT NOTICE: You MUST disable the plugin in TODAY screen setting (uncheck the checkbox) BEFORE upgrading. Make sure the plugin does not show on the Today screen before you upgrade!
I made the upgrade this morning => no problem
I just want to say that I had to make a soft reset after installation otherwise the plugin didn't show on today screen.
You've done big improvments since the first version
- good idea the icons to save place
- thanks for the autosize
- I'm going to test it this wee-end but no bug at this time
- what about a log file to keep trace of every data that zfTCT record ? Could be useful I think.

Who can Give Me Tips for Saving Battery in My TD2 ?

Anyone , Who can give me tips how to saving battery in my TD2 . Every Night my phone always charging , What i must to do ? . Yeah , Every day i play the udK rom ( Wheater demo , Photos & Videos tab 3d Animation ) so the battery fast to empty . who can give tips ?
Turn off bluetooth, lower screen brightness, and if you must have wireless data on, make sure it is edge, not 3g or HSDPA
Hey!
How to make sure it's edge only?
Thanks!
MFMultimediaFreak said:
Anyone , Who can give me tips how to saving battery in my TD2 . Every Night my phone always charging , What i must to do ? . Yeah , Every day i play the udK rom ( Wheater demo , Photos & Videos tab 3d Animation ) so the battery fast to empty . who can give tips ?
Click to expand...
Click to collapse
I have checked that these advanced settings on battery power are very important:
- switch off back light if the device is not in use for 30 sec
- deactivate the device if not used by 1 min.
Hey guys,
I installed an app for disabling the internet connectivity. The app is called Dial-up Enabler Disabler. I installed through Open Market. Try it, works like a charm.
Fastest way to disable 3G/H is to go to the Phone settings and switch it to GSM.
bmazloum said:
Fastest way to disable 3G/H is to go to the Phone settings and switch it to GSM.
Click to expand...
Click to collapse
can this be done with stock winmo 6.5 rom manilla 2.1? either att has crippled this ability or I am just not seeing it.
dubber1 said:
can this be done with stock winmo 6.5 rom manilla 2.1? either att has crippled this ability or I am just not seeing it.
Click to expand...
Click to collapse
It is stock but won't work all the time. Sometimes 3G turn on by it self. I use NoData, that's a simple app that does the trick.
@Ts
Some tips.
Install TD2 Tools from Gaz. It can save you CPU (so some battery usage). After changing the cache settings my CPU runs after start-up on 45% (formally 58%). After extreme usage, e-mail, internet/surfing, gaming, movies. It is like 65-67% (formally to 70-80%)
Install cleanRAM to close all of your applications you think are closed.
thanks Ciedric!
I installed the DialUp Enabler Disabler tool, disabled all the connections. Set the backlight time out to 30 secs., Disable bluetooth and WiFi when not using it. This allows me to use my phone for 1.5 days.
When travelling, I change the wallpaper to plain white background, lower down the volume to minimum and avoid using the phone when the coverage is poor (as phone uses more battery when coverage is bad), not using speakerphone and the battery lasts approximately 20-25% more than usual.
Also, although companies do claim that newer batteries are not affected by this, but I would suggest not to overcharge the battery, charge it during daytime when you can see that it is completely charged (avoid overnight charges), leave it for like 10 minutes extra and charge again when the battery is less than 12%, it works for me always. I have four cell phones, and 3 are more than 2 year old, still they give me more than 2 days of usage without charging.
You have to disable wi-fi, bluetooth and disable the automatic data connection for meteo and e-mail (no matter if you are under 2G or 3G network).
In this way my battery DOUBLE it's duration!
dubber1 said:
can this be done with stock winmo 6.5 rom manilla 2.1? either att has crippled this ability or I am just not seeing it.
Click to expand...
Click to collapse
To allow switching between 3G and Edge you need to modify registry. With a registry editor, go to following registry key [HKLM\SOFTWARE\OEM\PhoneSetting] and change "ShowUMTSBandPage" to 1, which will enable band selection page in phone settings. From there you will have to go to "Start - Settings - Personal - Phone". At the bottom you will now see a tab called "Band" in which you will have two drop downs. Under the first one you have the options of "Auto", "GSM", and "WCDMA". "GSM" is your EDGE only and "WCDMA" is your 3G. "Auto" allows for EDGE only when 3G mode is not available or drops temporarily.
MFMultimediaFreak said:
Anyone , Who can give me tips how to saving battery in my TD2 . Every Night my phone always charging , What i must to do ? . Yeah , Every day i play the udK rom ( Wheater demo , Photos & Videos tab 3d Animation ) so the battery fast to empty . who can give tips ?
Click to expand...
Click to collapse
one of the best is to set the brightness of the screen yourself, and uncheck "automatically adjust backlight setting".
I used the app 'Addin Timer' to scheduler the tasks, turn on the Airplane Mode in the night before sleeping, and turn off it in the morning. The battery cost 2% or 1% whole night. And this is good to our health/reduce the radiation, yes?
A good ROM may help you saving the battery, the official build used up the battery quickly by my experience

Green Power vs JuiceDefender

Hello everyone!
I was just wondering between these two apps...
Which one works better for you and if will be great if you can share your configuration!!
Also, does anyone knows is any of these two disable whatsapp and gmail notifications?
Many thanks for sharing!
Cheers!
IMHO
I can answer about Green Power Premium:
It doesn't have such option like disable notifications. He does such thing like disables data connection for amount of time you chose (for me it is 15min) and then enables data connection for amount of time you choose (for me it is 2min)
Now my Galaxy Note works 2 times longer (from 10h to 20h)
katinsh said:
I can answer about Green Power Premium:
It doesn't have such option like disable notifications. He does such thing like disables data connection for amount of time you chose (for me it is 15min) and then enables data connection for amount of time you choose (for me it is 2min)
Now my Galaxy Note works 2 times longer (from 10h to 20h)
Click to expand...
Click to collapse
WOW! double time!!
thanks for sharing!
I have been trying both, and while both of them seem to deliver a noticeable reduction in power draw (actually in my case a dramatic reduction), of the two I'd have to give my vote to GreenPower (I'm using the full version). The power reduction is at least as good as Juice Defender Ultimate, and the premium version is significantly cheaper.
Both work by turning various features (mainly Wi-fi/3g/BlueTooth) on and off automatically, but as result can cause delays in things like receiving push-mail and that kind of thing. With Juice-Defender I found this to be quite noticeable, but I'd have to say that with Green-Power I haven't really noticed it slowing down messaging or anything else.......
I've used them both - and deleted them both. I'd rather manage power myself.
i am using 2x Battery for me this is the best. simple and clean.
I usually use JuiceDefender but decided to try out Green Power. I really like it but I have a hard time getting my phone to sleep properly on GP.
i use widgetsoid and just enable my connection when i want it (wifi/3g)
i could never find the proper app that did exactly what i wanted- rather just have control.
going that was and using the phone an average amount my battery goes from 100 -> 75 from the time i wake up (7am) to the time i got to bed (12-1 am)
the 2500mah battery is pretty good!
With JuiceDefender I can get my phone to sleep 95%+ of the time but with GreenPower, my cpu is only sleep 40%+. Can anyone give me tips to get my cpu to sleep more to preserve battery?
katinsh said:
I can answer about Green Power Premium:
It doesn't have such option like disable notifications. He does such thing like disables data connection for amount of time you chose (for me it is 15min) and then enables data connection for amount of time you choose (for me it is 2min)
Now my Galaxy Note works 2 times longer (from 10h to 20h)
Click to expand...
Click to collapse
Just out of interest, what happens when you browse the web and GreenPower has turned off the Data Connection?
Or you're watching a youtube video and it decides its time to turn off data?
Tried both versions and found green power premium to work better for me. (Price was a good point too.)
However the next day I found that if I left my phone for a while (Around 1 1/2 to 2 hours), the display would not turn on and If I called the phone it would not ring. Only way to fix this was to press the power button for 10 seconds to reset the phone.
Uninstalled green power to see if this was the cause and hasn't happened since.
Was wondering if something similar has happened to other people?
I had to go back to JuiceDefender since I couldn't get my phone to go into deep sleep with GreenPower.
Hi, i went for Green Power. I found it simpler to configure, more focused on the job. Juice Defender has to much possible settings and complexity, this makes it a great tool but might also lead to poor efficiency.
I have never used green power before but im on juice defender. I have experienced auto turn off by the note due to a set cpu settings that govern lower clock to cpu at a certain condition. Due to the big display on note i think lower cpu clock wont do it. Because of that the device turned off itself. Upon failure to operate. Hope this solves your problem
I have tried JuiceDefender but ultimately prefer to do everything manually. Some how I always feel the auto manage apps will have everything off precisely when you need it. I use the SwitchPro widget to quickly enable/disable the various radios from my home screen and it works great.
@ Aldragor
I have/had the same problem. In the beginning I thought that my launcher would be the cause for this problem, but after I disabled my Green Power Premium it hasn't happend since now.
Juice defender ultimate, the feature of switching 2g 3g on stock ROM alone was worth the price!
After figuring out how to config GreenPower properly, I went back to it.
I used JuiceDefender and thought it was great.... when it worked. However, I used it mostly as a scheduler with about 15% battery saving which I took as the icing on the cake.
I want all connections on during the day (peak) so I can take skype calls, etc.. When I'm home, I just want to periodically check for mails, etc (so have connection enable every 15min) and when I go to bed I don't want to be disturbed by emails, messages, etc but still want phone/sms on in case there is an emergency. And most of all, I didn't want to have to manually do that every day.
Problem was that it never really stuck to the schedules. This was the ultimate version but it was a crack as they never offered the ultimate on a trial. I wanted to evaluate the ultimate and buy if it did the job. So, it might have been a bad crack which caused the problem, but I guess I'll never know as I don't want to risk wasting the money if the schedule problem persists.
I am a lover of juice, it keeps he juice in and right

[Q] Z3 Dual D6633 + Lollipop: from heaven to Hell

Sony xperia Z3 Dual D6633 Android 5.0.2 Build 23.1.1.E.0.1
Hi there,
Upgraded my Z3 to lollipop last week and, despite the fact that the upgrade itself was flawless, I think I went from a device that used to work like a charm to one full of annoyances.
On day #1, noticed the batt drain skyrocket. 3h after disconnecting it, it was at 68%, half way through the morning. WTF? was my first thought. On a typical day on kitkat, I was able to end the day at 40% at least.
The second thing I´ve noticed was the phone app. It starts giving me errors, saying that the "network could not be reached" when I try to dial a number. If I insist for 4, 5 more times, it crashes. Dialing is only possible again if I reset the phone.
The third thing is the lock screen. It seems that lollipop has a drop down menu that makes it possible to enable/disable lots of things, like communications and even setting the phone in airplane mode. Imho that´s a huge liability / security risk and it appears that there is no way around that.
Still about the lock screen, it seems to have a bug: if you have any activesync account setup, not notifications will show up, no matter how you configure it (to show all or hide sensitive content).
So, I had only one thing to do, after reading forums etc... factory reseting it.
Surprise! All problems are still there.
Does any1 have any tips on those?
Thanks in advance.
There will be a widget on one of the screens which keeps refreshing itself and I found that to be the battery killer on my 6603.
Did you use any specific app to pinpoint the culprit?
1. It is possible that the battery levels are calibrating and will be imprecise for a while after the update, using the device normally for a couple of days will fix it, or at least this is what I observed in many phones I owned.
2. This is very weird and I can't help you with. If not even factory reset did help you may have some corrupted data on one of your contacts maybe? Try to make a thread about this issue on the Sony forum.
3. I noticed that as well, but even on pervious versions you could turn off the phone so I don't think it changes anything. Make sure to disable the multi user options that would allowanyone to add a new user from the lock screen.
4. Another weird thing, I use exchange accounts on my phone and I don't have any problem on mine. See point 2.
Under
settings>sound and notifications>when device is locked
Set to hide sensitive notification content or don't show notification content at all.
This should fix lock screen displaying email notifications from your exchange account.
Also, unlock phone, pull down notifications, pull down again to reveal quick settings, hit the edit button (pencil) and remove icons but clicking and holding and drawing them to the top. Unfortunately this removes them even when phone is unlocked but of your worried about unauthorised toggling of things on off its the best you can do I think.
As for battery drain, check the battery usage in
Settings>power management
Make sure stamina mode is on, toggle it off then on to make sure.
Select battery usage and check to see if any apps are using more than they should. Make sure brightness is set low but enable adaptive brightness under display settings.
ozzy lion said:
Under
settings>sound and notifications>when device is locked
Set to hide sensitive notification content or don't show notification content at all.
This should fix lock screen displaying email notifications from your exchange account.
Also, unlock phone, pull down notifications, pull down again to reveal quick settings, hit the edit button (pencil) and remove icons but clicking and holding and drawing them to the top. Unfortunately this removes them even when phone is unlocked but of your worried about unauthorised toggling of things on off its the best you can do I think.
As for battery drain, check the battery usage in
Settings>power management
Make sure stamina mode is on, toggle it off then on to make sure.
Select battery usage and check to see if any apps are using more than they should. Make sure brightness is set low but enable adaptive brightness under display settings.
Click to expand...
Click to collapse
That's not a smartphone anymore, with all functions shut down and brightness low.
This phone has the best screen, use it at least 50% brightness.
I have no issues with the brightness down. It bumps up nicely in brighter conditions and will even max out in daylight. If I ever need it brighter then it's easy to boost temporarily. It's a small price to pay for nearly 24 hours of battery with 5 hours screen on time.
I never mentioned shutting down functions. The only thing I mentioned removing was the toggles that concerned the op on the quick settings. Removing mobile data and aeroplane mode from quick settings hardly cripples the device, I never use these anyway.
I don't think it very useful that there's not more customisation available here such as a complete set of separate lockscreen settings. But if all you can do is comprise then what else can you suggest?
I don't think unlocking the bootloader and installing a custom ROM is something the op wants to do.
ozzy lion said:
I have no issues with the brightness down. It bumps up nicely in brighter conditions and will even max out in daylight. If I ever need it brighter then it's easy to boost temporarily. It's a small price to pay for nearly 24 hours of battery with 5 hours screen on time.
I never mentioned shutting down functions. The only thing I mentioned removing was the toggles that concerned the op on the quick settings. Removing mobile data and aeroplane mode from quick settings hardly cripples the device, I never use these anyway.
I don't think it very useful that there's not more customisation available here such as a complete set of separate lockscreen settings. But if all you can do is comprise then what else can you suggest?
I don't think unlocking the bootloader and installing a custom ROM is something the op wants to do.
Click to expand...
Click to collapse
You said stamina.
Stamina means already some functions off.
Update:
1. Batt drain
Remains without an explanation. My daily use profile is basically the same as before the update. 3PM and I am at 28%, with stamina on. I can´t recall a day, running kitkat, that I would hit the charger at night with 28% of batt remaining (and I still have 4h to go). It was always on 40% ish. GSAM is reporting that 47% of the batt drain is caused by apps and, from that, 30% is represented by android core apps + android system + kernel. I might be wrong, but I think it is related to reindexing, contact + agenda sync etc and it will probably get lower eventually (I hope!)
2. Phone App giving errors
I think I have isolated the problem. It seems to be caused by TrueCaller.
3. Lock screen
Regarding the drop down menu, It is clear now that what I think is a problem is, in fact, by design and there is no way around it without rooting. But regarding the notifications, I just removed both activesync accounts and I started getting notifications in the lock screen again. So, my guess is that there is a policy of some sort that is being interpreted by the phone as it should hide all notifications from the lock screen.
In fact, there are lots of things that got blocked / disabled because of those policies. Here is a list of things that were disabled and now appear to be working again, after the removal of the activesync accounts:
. notifications are showing again in the lock screen;
. smart lock;
. screen lock options (none, swipe, pattern);
note: I thought that I would be able to enable services in Accessibility, like LastPass or App Advisor by Norton, but it still does not work (I try to enable any of them, but pressing "ok" on the warning dialog does nothing and the only option working is "cancel").
Thinking about resetting it again...
Hi, if problems are persistant you can always downgrad software at KitKat by using FlashTool and wait Lollipop 5.1 (5.1 will probably solve many problems).
StealthNet said:
Update:
1. Batt drain
Remains without an explanation. My daily use profile is basically the same as before the update. 3PM and I am at 28%, with stamina on. I can´t recall a day, running kitkat, that I would hit the charger at night with 28% of batt remaining (and I still have 4h to go). It was always on 40% ish. GSAM is reporting that 47% of the batt drain is caused by apps and, from that, 30% is represented by android core apps + android system + kernel. I might be wrong, but I think it is related to reindexing, contact + agenda sync etc and it will probably get lower eventually (I hope!)
2. Phone App giving errors
I think I have isolated the problem. It seems to be caused by TrueCaller.
3. Lock screen
Regarding the drop down menu, It is clear now that what I think is a problem is, in fact, by design and there is no way around it without rooting. But regarding the notifications, I just removed both activesync accounts and I started getting notifications in the lock screen again. So, my guess is that there is a policy of some sort that is being interpreted by the phone as it should hide all notifications from the lock screen.
In fact, there are lots of things that got blocked / disabled because of those policies. Here is a list of things that were disabled and now appear to be working again, after the removal of the activesync accounts:
. notifications are showing again in the lock screen;
. smart lock;
. screen lock options (none, swipe, pattern);
note: I thought that I would be able to enable services in Accessibility, like LastPass or App Advisor by Norton, but it still does not work (I try to enable any of them, but pressing "ok" on the warning dialog does nothing and the only option working is "cancel").
Thinking about resetting it again...
Click to expand...
Click to collapse
A new firmware version has dropped for the Z3 which I think fixes your issues with notifications.
I received it OTA yesterday, I'm running the Balkans customisation.
Thank you for the tip! I hope it does! Will keep it posted here just for the reference. I am starting to feel other "symptoms" as well, like bluetooth instability (you pair a device and it stops working, have to pair again).
.
Just hit another weird thing.
I am not being able to create a new vpn connection. I am trying to use the PureVPN and IPVanish client software, but when I try to setup the conection, I receive a disclaimer, saying that my traffic might be monitored, with a "CANCEL" and "OK" options. The OK doesn´t work, only "CANCEL".
My device is encrypted and I have also noticed that I am not able to decrypt it.
Also, If I go to Accessibility and try to enable a service, the same thing happens: a disclaimer appears, saying that the service might observe my actions, with a "CANCEL" and "OK" options. The OK doesn´t work, only "CANCEL".
Any ideas?
Ok, just a quick fup: the ability to create VPNs from apps is disabled if you encrypt the phone. It seems that if you create if before encrypting, it won´t be disabled; but you wont be able to create a new vpn from an app downloaded, after encryption.
Regarding the Accessibility > Services, after a *lot* of research, I have found that Twilight was the culprit. For the reference:
https://code.google.com/p/android/issues/detail?id=79637

Android 10 unstable

I recently bought an S10e. Lots of improvements over my S7 - but I'm finding Android 10 to be very unstable. About once a day it gets into a mode where apps keep crashing and reopening.
I have turned off all the power management features I can find, but this still happens. Rebooting fixes the problem for a while (i.e. a matter of hours through a day or so).
The phone is an SM-G970W with the 1 Feb 2020 update (G970WVLS3CTA3).
Has anyone else encountered this kind of problem?
- richard
I have the same build and model with the same security patch update for Feb 2020. No issues here just waiting on one UI 2.1 is all. It's a pretty rocking phone.
Cheers
@Blandhotauce - Thanks - you give me hope that I can resolve this! I have reset the phone and am installing apps from scratch, rather than use Smart Switch (as I did the first time around).
Do you use any apps that require special permissions, such as AccuBattery or GSam? I had both installed before, and I'm wondering whether that may have led to the instability.
- richard
rbc_tn said:
@Blandhotauce - Thanks - you give me hope that I can resolve this! I have reset the phone and am installing apps from scratch, rather than use Smart Switch (as I did the first time around).
Do you use any apps that require special permissions, such as AccuBattery or GSam? I had both installed before, and I'm wondering whether that may have led to the instability.
- richard
Click to expand...
Click to collapse
No I didn't use any apps like that. I use that standard array of Google and Samsung apps. Messages, gallery, pretty vanilla stuff.
Not many third party apps so that could be a reason. I have, however, installed an IPTV APK.
@Blandhotauce - Do you have any of the battery saving features turned on, such as
- Adaptive power saving
- Adaptive battery
- Put unused apps to sleep
- Auto optimization
- Optimize settings
Thanks
- richard
rbc_tn said:
@Blandhotauce - Do you have any of the battery saving features turned on, such as
- Adaptive power saving
- Adaptive battery
- Put unused apps to sleep
- Auto optimization
- Optimize settings
Thanks
- richard
Click to expand...
Click to collapse
Under battery in device care I have power mode set to optimize. But adaptive power saving is not on.
Under app power management right below the power mode option I have both the adaptive battery option and put unused apps to sleep selected on.
That's pretty much it. I have a young family so that keeps me busy. I wouldnt say I'm a power user or anything like that but I watch YouTube and read a ton of articles and respond to emails throughout the day. I also make use of WhatsApp and Google duo video calls during this period of self isolation.
With that said, I get pretty much a full day of use out of it. By the time the kids are in bed and I'm ready to call it a day I'm at around 20- 30 percent.
Is the phone perfect? No, but I like the smallish form factor with the really decent specs. I expect to use this device for at least another 3 years. I've even prepared to replace the battery when it starts to become sluggish. There's helpful YouTube videos on what tools and methods are required for a battery replacement. Just can't find a modern phone in this form factor anymore.
Cheers

Categories

Resources