Database Info

UK Version MSVC

I have MS Voice Command UK version. I'm using the very stable WM6 ROM from jwright; is it possible to change the US version to the UK version so it recognises the dial pattern correctly?
If it is possible, it would make my device perfect.

I have been trying to locate that for ages, cant see anywhere selling it (V 1.6)...Where did you get it?
Thanks

jasonkruys said:
I have been trying to locate that for ages, cant see anywhere selling it (V 1.6)...Where did you get it?
Thanks
Click to expand...
Click to collapse
Jason,
This has been available for ages, try http://www.handango.co.uk/PlatformP...2&platformId=2&productType=2&productId=151270
Regards
Mav

Where I got it from, in fact.

Thanks guys, I'm sure I looked there before, but only saw the 1.5 version..Got it now

I don't use this ROM, so I'm only guessing here. Presumably Voice Command does not show up in Remove Programs.
In which case you could unlock the extended ROM and replace the MSVC US cab with your MSVC UK cab and do a hard reset. Your version should then get installed (at the expense of all you installed programs and setting obviously).
Or has JWright done something more clever with his ROM to get MSVC on there?
Mike

Voice Command is integrated into the core ROM on WM6.
Although you can still install the UK version, it will use up storage space, but it should still work, it was what I did on the earlier WM6 builds to get the bluetooth button issue resolved, and always worked fine.

Possible to extract ATT messaging CAB/Program

I really like the yahoo/msn/aol messaging applications that comes with the ATT 8925 ROM, is there any way to extract this program for future use on future cooked ROMs? I'd really like to use the Kaiser ROM on my Tilt, but I really like the messaging App found on the ATT Tilt ROM. Anyone know where I can get the cab file for it? Any help on this is greatly appreciated.

well im+ isn't to bad i think you can get it for free if you know what i mean
I also heard Cerulean Studios is working on an ppc version of their upcomming Trillian Astra.

kman79 said:
I really like the yahoo/msn/aol messaging applications that comes with the ATT 8925 ROM, is there any way to extract this program for future use on future cooked ROMs? I'd really like to use the Kaiser ROM on my Tilt, but I really like the messaging App found on the ATT Tilt ROM. Anyone know where I can get the cab file for it? Any help on this is greatly appreciated.
Click to expand...
Click to collapse
I'd like this too.

pulled from the ATT Rom...
I've not tried them on the HTC ROM so can't verify their functionality.
Please report back with your results.

OZ is no good
OZ charges incomming and out going txt, there are data programs out there

Has anyone with a Kaiser ROM managed to get the ATT sms based chat client to even sign-on?

nope doesn't work for me either

hasteveha said:
nope doesn't work for me either
Click to expand...
Click to collapse
what doesn't work?

Check and make sure you are using MediaNet as your ISP. I use wap.cingular and the only one I have ever gotten to work is Yahoo...

are there any clients that'll work on tmobile's network using sms? that's one thing I always liked about old motorola phones on generic firmware.

oz
I had a oz program on my tmobile wizard and it worked great but this one doesn't work for me I have a kaiser with the stock rom and liked this on my buddys tilt?

your post inspired me to do some searching to try the wizard tmobile oz im on my kaiser. I found this thread: http://forum.xda-developers.com/showthread.php?t=260893
installed the oz on my phone. I use tmobile usa. I tried a logon and got an im on my computer saying I logged in on another device from aolsystemmsg. But the oz client seems to die. I get to receiving buddy list, and then it says communication error. Doh

isdereks said:
Has anyone with a Kaiser ROM managed to get the ATT sms based chat client to even sign-on?
Click to expand...
Click to collapse
im running the OEM Kaiser ROM and have had no problem using the OZ messenger (i only use it for AIM though. haven't tried yahoo or MSN). as someone else points out, make sure you are using MediaNet instead of MyISP. that was the first thing I did when i flashed the new ROM. i checked the default internet connections in everything and made sure it was all set to MediaNet (i also removed the proxy within the MediaNet settings but doubt that that would effect it).

WOOT! Thanks been looking for this and it works on my 8925 I'm using yahoo and aim.

MMS Starts New Thread

My brother has a vzx TP2 and is having a problem that I can't find the answer to. I don't experience the same issue on my AT&T TP2 so I came here. His phone starts a new thread for every MMS he receives instead of showing the mms in an already existing thread from the same contact. For example when he sends me a number of sms they are all in one thread, then he sends a pic and in the same thread i get a little icon that i click on to open his mms. On his phone the icon is not in the same thread, his phone starts a new thread for each mms he recieves. I have searched the forums and not found anything (could be my search parameters) and I have scoured my phones settings to see if that is a setting. Now I know I have WM 6.5 and he is on 6.1 but my last phone had 6.1 and is functioned like mine does now, so I have to assume that this is either a vzx problem or a problem specific to his phone. Any ideas?

It's not a problem just the way it is. Which sucks by the way if you get a load of mms's, really disorganizes my inbox.
Posted this before to see if someone might know if it was recodeable but my post got treated like it had the swine flu! It's def a problem with the arcsoft mms software. I had an omnia with a different version of arcsoft and it worked fine.
Dont think you can port the version over though, way to integrated in the manilla system. I hate manilla, all spb ms3 for me.

Thats interesting to know. we both run spb ms3.5 and while mine runs well, his has the aforementioned problem and he also has an issue with the messaging program freezing and not opening requiring a soft reset. Does your messaging refuse to open sometimes as well?

I have the same issue with Sprint so it must be a CDMA thing. On my TP I ran an extracted version of arcsoft from the treo pro to fix it but tried installing on the TP2 and it doesn't deliver messages.

What version of arcsoft does the cdma tp2 come with?

shvdkty said:
What version of arcsoft does the cdma tp2 come with?
Click to expand...
Click to collapse
Mine is showing version 5.0.94.128

Hmmmm unless I am looking at the wrong thing I am showing composer version 5.2.0.37 from arcsoft. Of course I have WM6.5 and a GSM version of the phone.

That would definitely be a reason there are differences. Did you check your brother's to find out what version it is running?

I am waiting for his reply. I do find it odd that my last phone (kaiser) when I upgraded it to 6.1 from the AT&T official release my arcsoft messaging client worked fine....I may have to see what version it is when I get home.

hmmm....I sort of just noticed this issue myself. I'm running the Verizon TP2 and it does indeed put MMS in a seperate thread. I'd be interested in a fix as well if anyone finds one.

Is there any kind of Solution to this my TP2 does the same thing every MMS is a New Thread and like chetqwerty said it really disorganizes the Inbox.

I actually thought this was done purposely. It was the same for me in 6.1 (6.5 too) on my TP2 and XV6800. I am used to it so I have no problem with it and I think its easier then going through tons of threads to find a pic or video.

Swype from 2.07 rom required

HI can anyone tell me where to get new skype from 2.07 rom ???
thanks in advance.

You won't find anyone with it here. The best solution is to simply flash to a ROM that has it.

I have so much data on phone can't backup all of it so dont wana change rom for time being........

Im not sure where to grab the version of swype that has been extracted from the 2.07 rom... i am trying to find it myself!
The swype cab created from the version ripped from the Samsung Omnia 2 is all over the web though... google should bring up a couple of places to download it from.
Does anyone know of any differences between the two versions?

Audio Oblivion said:
Im not sure where to grab the version of swype that has been extracted from the 2.07 rom... i am trying to find it myself!
The swype cab created from the version ripped from the Samsung Omnia 2 is all over the web though... google should bring up a couple of places to download it from.
Does anyone know of any differences between the two versions?
Click to expand...
Click to collapse
You will have to search in the underground... Extracting the software and offering it as a cab is clearly not wanted by the creators and owners of the software. Offering links to warez is completely against xda rules.
The difference between the 2 might be some more language support, and that the HD2 version was made for HD2, as simple as that. I think it still might be an option to flash a ROM which carries it on board - or, at least, as long as this is tolerated.
Maybe in the close future, HTC will bring another ROM update which offers this great piece of software. Or, as stated otherwise, Swype might decide to make a retail offer at some time. If they do at a decent price, I believe they could do great business - as seen with other products, at unreasonably high prices, you won´t sell big, but at fair pricing, you can succeed.

I cannot find the new version anywhere!
If anyone has a link or would like to email it to me that would be very much appreciated!!

Karlos G said:
I cannot find the new version anywhere!
If anyone has a link or would like to email it to me that would be very much appreciated!!
Click to expand...
Click to collapse
pocketnow.com has written a nice article about it. Read it

i downloaded new version from pockernow article. noted some minor improvements.....
Karlos G said:
I cannot find the new version anywhere!
If anyone has a link or would like to email it to me that would be very much appreciated!!
Click to expand...
Click to collapse

Are u refering to version 3.9?. I installed that and it reset my email pwds

Cheers!
It's also here http://forum.xda-developers.com/showthread.php?p=5679513

Hmm I get an error saying "Cannot Open English File" when Swype starts up anyone else having this?

kivine said:
Are u refering to version 3.9?. I installed that and it reset my email pwds
Click to expand...
Click to collapse
I had the same thing, only installed yesterday so didn't do much checking of the phone. Quite a few problem were caused by the T-Mobile version . Data connection is screwed and all email passwords needed to be reset and my Wifi password are also gone lol. Did some reading online as well and quite a few other people have experienced the same problems, some have even had to HARD RESET to get their phones working correctly, fortunetly for me just uninstalling the CAB and giving the phone a few minutes resolved my Data connection issues , will put back on the Omnia version and leave it at that for the time being.
So I advice using the newest version of Swype with EXTREME caution!!!!

I tried it after much hesitation... Had to do a new setup for all email accounts, data connection and wifi connection. But it seems to be fine now, I'll see in a few days if it stays like that.

I'm using SWYPE WVGA 3.9.10.10.5032 on my HD2 without any problems.

xavierdemon said:
I had the same thing, only installed yesterday so didn't do much checking of the phone. Quite a few problem were caused by the T-Mobile version . Data connection is screwed and all email passwords needed to be reset and my Wifi password are also gone lol. Did some reading online as well and quite a few other people have experienced the same problems, some have even had to HARD RESET to get their phones working correctly, fortunetly for me just uninstalling the CAB and giving the phone a few minutes resolved my Data connection issues , will put back on the Omnia version and leave it at that for the time being.
So I advice using the newest version of Swype with EXTREME caution!!!!
Click to expand...
Click to collapse
Had the same, but all I had to do was re-enter the passwords (and mail servers for gmail) and re-run the connection setup wizard. Now I'm fine and dandy and the software is nothing short of awesome... Supports Italian, German, French, English and Spanish; I tested all languages and it works fine

I'd say it is a crucial addition to the HD2, as I use it every day, and it makes my text input much less of a chore. It is particularly useful because of its multi-language support. I've never had any problems like those described, thankfully.

have you guys done any soft resets since the initial reset after installation? I also found the keyboard became slow to start after I played with the setting. the omnia 2 version is working better for me and with the htc skin looks awesome.

READ THIS BEFORE INSTALING THE NEW SWYPE! (v3.9)
Original Post
http://forum.ppcgeeks.com/showpost.php?p=1578221&postcount=50
PPCGeeks User said:
I can't believe no one else posted this...
If you overwrite the ModelID with the file provided, you are effectively telling your phone that you are now....a...tmobile hd2.
The swype keyboard has protection in it...only a tmobile hd2 will work with it.
hence why you need the modelid
now here is the kicker...
Say sprint - you run sprint tv. get an error. wanna know why? sprint asks "what phone" and your phone replies "tmobilehd2.
Same thing with prl updates...
I think you get the point...
when you overwrite the modelid, all exchange accounts - gone (sorta). Your 4 digit pin become a lockout - no pin will unlock it.
in short, bad things happen.
And this is why you always provision your phone before you set it up. part of provisioning is setting the modelid...
which is why people on mighty that forgot to provision before seting up exchange need that fix e-mails cab...
any questions?
Click to expand...
Click to collapse

@leepriestenator, if I don't use any provider software, I can install swype without any problem right ?

leepriestenator is correct. Thanks. As our phones are all unlock where we are, the problem is just resetting the mobile provider. It is working fine on my phone, though the phone identity is now T-mobile_Leo.
Having said that, it is a much improved version over the one in Samsung.

Sprint Music Store in Energy ROM?

Okay, I've spent the last 3 days looking for any info on accessing the Sprint Music Store after installing an Energy ROM. I've found a couple things that looked promising, but nothing has worked. If there is already an answer here somewhere, I'm sorry, but I've missed it.
Does anyone know how to do this?

Is there a specific reason why you would even want sprint music store? You could get off a lot cheaper by signing up for a different plan through an online network. (there are plenty) Plus you can use just about any mobile browser to download your songs.
There may be, but I have never seen a Sprint Music Store program for a flashed ROM (Unless the chef has specifically cooked it into his recipe.)
BUT..................... If you are really hard up for sprint music downloads, you can just go to the sprint mobile website and download any of their mobile apps/music.
Hope this helps.

It's not that I HAVE to have the Sprint Music store, but.... our contract at work gives us a few free downloads each month, and I already have almost 100 songs that I can't use now that I've flashed my ROM.
It looks like Sprint took away the ability to log on to their website and download songs.

I am able to log on to the sprint website and download. Are you using Pocket Internet Explorer or Opera? You should be able to use PIE or Opera 9.5 and login/download. I am not sure about newer versions of opera/opera mini/skyfire/etc.

antjc80 said:
I am able to log on to the sprint website and download. Are you using Pocket Internet Explorer or Opera? You should be able to use PIE or Opera 9.5 and login/download. I am not sure about newer versions of opera/opera mini/skyfire/etc.
Click to expand...
Click to collapse
Which ROM are you using? Energy ROM comes with Opera 10 and they are not cooking Sprint Music in to that ROM.
When you say you can log on to the Sprint website and dowload, what do you mean? Can you be a little more specific? What URL are you using?

I am using NRG "Leo" ROM March 7 23542 WM 6.5.5 w/ Sense 2.5.2012
If you don't want to use the Opera 10 Beta, just install a different version. Grab a cab file anywhere and find the browser that works best for you.
If you go to "sprint.com" and at the bottom left of the screen click the "digital lounge" link you have access to everything you can possibly download to your phone through sprint. Games, wallpapers, ringtones, calltones, and music. (among others).
The exact address of the generic digital lounge is:
https://manage.sprintpcs.com/Manage...HP_DME_Link_ShopDigitalLounge!26zone=Overview
Although to purchase anything, you have to sign in to your sprint vision account.
Hope this helps, let me know if there is anything else you need help with on this....

antjc80 said:
I am using NRG "Leo" ROM March 7 23542 WM 6.5.5 w/ Sense 2.5.2012
If you don't want to use the Opera 10 Beta, just install a different version. Grab a cab file anywhere and find the browser that works best for you.
If you go to "sprint.com" and at the bottom left of the screen click the "digital lounge" link you have access to everything you can possibly download to your phone through sprint. Games, wallpapers, ringtones, calltones, and music. (among others).
The exact address of the generic digital lounge is:
https://manage.sprintpcs.com/Manage...HP_DME_Link_ShopDigitalLounge!26zone=Overview
Although to purchase anything, you have to sign in to your sprint vision account.
Hope this helps, let me know if there is anything else you need help with on this....
Click to expand...
Click to collapse
Yes, I see the music link here, but when I log in, it goes away and is replaced by a TV/Radio link. I heard Sprint was only going to allow certain devices to only download music on the device, and that seems to be true from what I'm seeing.

Sorry, didn't even go that far with it. I gave up on the sprint store back when I had my PPC6700 (BTW I have had the exact same phones as in your sig... except for the diamond.)
only thing I could suggest is to flash a shipped ROM, download away at the music store, and move the music files to your storage card. Sucks but I have nothing else, and haven't found anything in the way of installing the software for it.

antjc80 said:
Sorry, didn't even go that far with it. I gave up on the sprint store back when I had my PPC6700 (BTW I have had the exact same phones as in your sig... except for the diamond.)
only thing I could suggest is to flash a shipped ROM, download away at the music store, and move the music files to your storage card. Sucks but I have nothing else, and haven't found anything in the way of installing the software for it.
Click to expand...
Click to collapse
I thought of that before I flashed the ROM, but it seems as though there's no way to keep the DRM intact. None of the downloaded songs play anymore.

helirob said:
I thought of that before I flashed the ROM, but it seems as though there's no way to keep the DRM intact. None of the downloaded songs play anymore.
Click to expand...
Click to collapse
Another victory for DRM, keeping people from using what they lawfully purchased
Sorry I couldn't be more help to you.