T-Mobile MDA Compact IV (Touch Diamond) - Touch Diamond, MDA Compact IV Accessories

Hi there,
Does anyone happen to know where I can get spares for the phone above.
I had an unfortunate incident a while back whereby an ebay buyer tried to repair this item and severed the ribbon cable between the side up and down buttons and the camera board (front facing one) and as such, need to get hold of this part.
If anyone knows where they can point me in terms of obtaining this(or any other spares for this model) I'd be very grateful. Failing that, does anyone happen to have a spare touch diamond/compact iv that is broke and not being used or they plan to dispose of?
Longshot I know - but if you don't ask - you don't get lol

Related

Spare parts?

Does anyone know a place to get spare parts for the XDA II (not likely) or does someone have a broken XDA II they are selling parts off of?
I somehow managed to crack part of the casing of my I-mate around my power switch. Well tonight it finally broke off and I am devistated. (ok well.. pretty upset at least)
If anyone has a spare... I am looking for a replacement black piece (antenna cover) of the casing. Would pay generously for one.
I'm looking for a spare casing...
Last friday I dropped my MDA2 and the case now has a small dent near the Bluetooth LED and a small scratch on the opposite corner and I want to replace it as soon as possible!
Anybody knows where to get replacements?
Is the case metal or plastic?
Thanks in advance...
Rayan
I may have XDA 2 Spares!
I am currently battling to get my XDA 2 repaired under warranty by o2 in the UK..
If i lose: I will have an xda 2 worth of parts (minus the mainboard) less than six months old immaculate apart from the board and its connector.
so case is scratch free, screens perfect etc...
Failing that if anyone has an busted xda 2 with a working mainboard please mail me...
parts
Matt,
How did you get on with O2, I'm looking to get all the parts except the main board as I've got one of them.
Cheers
Cmcmill01
parts
Matt,
How did you get on with O2, I'm looking to get all the parts except the main board as I've got one of them.
Cheers
Cmcmill01
I lost! No repair, no warranty, 6 weeks and no service!
I have come up with another solution for my broken xda connector.
The device still functions but i cant connect to my laptop/docking station, so im going to buy a bluetooth card and spare batt, keep the spare batt on charge using the docking station and use bluetooth to sync with laptop...
spare batt = £15
bluetooth card = £20
my total = 35
O2's = £185 a mear £20 cheaper than a brand new XDAII !!!
AND THEY WERE GOING TO CHARGE ME £17.50 to send the bloody thing back without having lifted a finger to repair the device! Until i went ballistic in the store in front of a dozen customers, and i do mean ballistic a bit digruntled wont work you have to loose it in front of as many customers as possible to force them to back down and return your property.
I will never buy new from O2 again, and as soon as the contract hits 12 months they are history bollox to them. The warranty is not worth the paper its written on, the shop service is less than i would expect from cowboys r us, save yourselves time and pain buy second hand theres still no warranty but its cheaper by far..
p.s. for those who are bound to ask, No mention of any charges including postage are/were made at the point of handing my phone over or at any time until 17.50 was demanded for its return.
@ Matt Ryan
my XDA 2 connector snapped from the pbc
ill tell you how to fix.....
get hold of an ipaq 38xx or 39xx, SPV 1, or spv2 or xda 1 or xda2 board and desolder the connector off and put a new one on
i got hold of a spv1 for less then £30 and ive stripped the board and sending it to my mate who deals in small eloctronics reapir hes charging me £15 to hot air rework the connector off the spv and put it onto the XDA2 pbc
meaning all repaired and stronger then before
gaz
did you not sign an a-novo repair sheet. It states clearly on the reverse side of this that is your device is beyond economical repair, or if you refuse a quote, you will be charge £17.50.
nope i didnt sign a-novo contract/ job sheet
I took the phone to an o2 shop and signed THIER repair sheet, nothing on reverse nothing refering to charge for returning device if not repaired
Nothing anywhere, nada...
Repair XDAII's screen, connector and casing in the UK
Hi guys,
I can repair the following faults/damage of XDAII here in the UK.
1. replace broken connector.
2. repalce broken LCD screen.
and please email me for any damages/faults/repair that you require for your unit, and I'll qoute you accrodingly.
all parts are brand new!!! not spare ones from broken unit.
please email me for a 'HAPPY' qoutation today on [email protected]
cheers
Hello-I need help finding a place that in the USA can repair my xdaII. I just dropped it on my marble floor -- OOPS! I thought you may have heard of a place for me to send it?? I believe I've broken the lcd & glass...it functions fine but has major cracks/shatter marks thoughout the screen...Let me know if you can help & thank you
For anybody interested, I have an xda 2, the screen is bleeding, the imei is blocked in UK owing to insurance claim but will work in rest of the world. I want £50 gbp. If nobody takes it I will post on ebay.
S O L D
hello christin
contact me at +65-98787543, i buy your phone
regards
Kaiser
www.kaiserelectronics.net

Broken screen

Please help, I would need a new screen 'cause my tornado was dropped from 3 meters high. The phone still boots up but the screen's gone. Where can I buy it? I also need the torx to open the phone.
Is this work I can do without sending the phone in for repairs (i am a computer technic)?
P.S: does anybody know if wm 6.1 solved the tornado joystic issue?
Thanks in advance
Item number: 220219086060 on Ebay. Good Luck
LCD screen
One of my co-workers dropped their fairly new Cingular 2125 a few months ago. I found a replacement screen on eBay for about $25. Took a few weeks to ship from China. It took a little work, but I successfully installed the new screen. Works just fine. Here are a few links that help with the general disassembly and screen replacement steps. I know the directions say to use a T5 torx, but i used a T6 with no difficulties. Good luck
http://www.modaco.com/content/HTC-Tornado-Faraday-Variants-Tornado-MoDaCo-com/247910/Replace-screen-on-SP5-Tornado-with-screen-from-C550/
http://www.2125resource.com/tweaks/disassembly.html
mastman
LCD Screen
Just replaced my O2 IQ screen today after smashing it on a holiday in spain. p/n 60h00039-00m or 60h00041-00m, bought off ebay for £12.99 and £2.99 postage. be careful with the connector after my 1st attempt the text was backwards and i thought it was the wrong screen but after reseating it firmly it came up and is working wonderfully...now for flashing

digitizer for att fuze?

I cracked the digitizer on my fuze not too long ago, but I have been looking around for a new one so I can replace it. I have only for the one that belongs to the touch pro that has the camera on front which means there is a hole where the att logo would be. Does anyone know where I can get one that at least has no hole on the digitizer? And on that note does anyone know how to replace the digitizer? Because I know how to do it on the diamond (I found a site that went step by step how to) but the fuze is obviously different from the diamond. I hope I wouldn't have to dismantle the whole thing since there looks to be a way just to get to the screen from the sliding part instead of going through the back.
Did you manage to find one of these?
no I didn't. But I managed to get att to replace it. It's been a while now since i talked to them, but appperentally I had bought a warranty on it with out me knowing it. But if you have an idea where to find it, that would be helpful in the future if I am not so lucky again

Where to get reaplacement parts for touch pro (digitzer & keyboard)

Hey guys.. I droped my touch pro about a week ago onto concrete and need a few replacement parts.. I haven't dropped a phone for years when I have had much cheaper phones and now I get a decent one this happens!
The phone actually still works 100% but is in a horrible state.. the digitzer has smashed but somehow still works, theres a key missing from the keyboard and the case is a bit munted, I will attach photos if I can.
I called 3 places in australia;
#1 HTC direct who said send it to us for a quote and we may be able to fix it ($38.50 for the quote and $11 to courier it back)
#2 A htc approved repair centre who said $170 for the screen and $110 for the keyboard.. I got into an argument with their receptionist saying the lcd is fine I just need the digitzer but she was adament they are one and the same.
#3 The vendor where I got the phone, who said their repair centre could fix it but I would have to send it to there for a quote ($35 for quote and $15 postage back)
So from what I can see I'm looking at around $300 from one place or pay $50 to another place for just the quote and they may not come back any cheaper..
I am confident enough to pull the phone apart and repair it myself.. don't have much to lose.. (I actually replaced the phone with a touch HD the next day.. sort of like drown your sorrows by replacing it with something better) As the touch pro wouldn't turn on and I figured it was completely dead..
On closer inspection a few days later I found the battery terminals had bent and wern't contacting, I bent them back and it turns on and works now)
I just want to replace the broken parts because it's a horrible mess!
I found a store on ebay selling the digitzer for $60 which is around what I would expect to pay, waiting to hear back from them if they can source a keyboard and the internal case parts, I thought someone on here might know where I can source these parts outside of Australia?
pics are below.. hope they work (warning: not for those with a weak stomach! )
Here you go
http://mobile.brando.com.hk/prod_list.php?dept_id=039&cat_id=1149
It would be easier to just buy the lcd with digitizer already installed
http://mobile.brando.com.hk/prod_detail.php?prod_id=03799&dept_id=039&cat_id=1149
US$88.00
Here's the complete housing with keyboard.
http://mobile.brando.com.hk/prod_detail.php?prod_id=03811&dept_id=039&cat_id=1149
US$85.00
Thanks, you're a lifesaver! the only trouble is that keyboard is different to mine I think the keys would probably all line up and work but you would have to know which one was which (the symbols and punctuation ones would be hard) if I can't get the right one I'll probably order from there but if anyone knows where I can get the correct keyboard that'd be even better
Happy to help
Let me see if I can find you the touch pro keypad.
Here you go
http://www.order-bulk.com/product_info.php?products_id=86904&language=en&cPath=357
If you were here I would hug you, I have no idea how you found that so fast, maybe I was looking in the wrong places (scouring ebay and google australia) but I've been looking for hours! can now order all the parts I need to turn it into a brand new phone
Out of interest, when you say it's easier to get the screen with the digitzer already installed, is there a reason for that? I see digitizers advertised everywhere seperately, and thought they were an entirely seperate part to the LCD, or are they connected via a bunch of fragile edge connectors? I'm happy to pay the extra $44 to get the lcd / digitzer combo if theres a risk of screwing up seperating them but if it's not a hugely risks job then I wouldn't mind saving the cash..
Thanks so much d3th metal
Hey mate, i got a big f'ing scratch down my brand new fuze. Would love to know how this goes, if you get the digitizer or full screen. As im going to try and polish it out, but i dont hold much hope. So i think this is going to be the only way.
Don't know if this is a case of too little too late information, but i tried to replace the digitizer only on my touch pro because i had some major scratches on the screen. I've taken a part a number of phones in the past and I work with electronics for a living, and for the life of me I have no idea how anyone could separate the LCD from the touchscreen. I ended up cracking the LCD glass and breaking one of the itty-bitty flat cable connectors. My recommendation to anyone contemplating this is to just pay the additional cash to get the LCD and digitizer together. I tried to save $40 and now my phone is in a zillion parts in a plastic bin waiting for the new screen to get here
sanche13 said:
Don't know if this is a case of too little too late information, but i tried to replace the digitizer only on my touch pro because i had some major scratches on the screen. I've taken a part a number of phones in the past and I work with electronics for a living, and for the life of me I have no idea how anyone could separate the LCD from the touchscreen. I ended up cracking the LCD glass and breaking one of the itty-bitty flat cable connectors. My recommendation to anyone contemplating this is to just pay the additional cash to get the LCD and digitizer together. I tried to save $40 and now my phone is in a zillion parts in a plastic bin waiting for the new screen to get here
Click to expand...
Click to collapse
Yeh the way to do it is to use a razor blade. It will definitely take some time though and a lot of patients.
This would be awesome for a sticky. It would provide anyone who needs help with getting parts for their touchpro/raphael/fuze if they decide they need it.
D3TH METAL said:
Here you go
http://www.order-bulk.com/product_info.php?products_id=86904&language=en&cPath=357
Click to expand...
Click to collapse
Would be I able to replace this keyboard with the one on my Fuze, I know i would have to figure out how to map all the buttons right, but would it fit correctly
Please pm me, Thanks
HELP
Did any1 buy anything from the mobile.brando.hk? If so pls tell me if I should get the replacement touch screen from them. My touch pro is full of anoying rainbow scratches
Antenna
Does anyone know where I can find a replacement internal bluetooth antenna wire?
I have a boot up Touch pro from HTC not AT&T, but just not go to the operation mode! Screen is prefect condition no starch, will come with screen protector. The outside case is prefect condition, Anyone want it? I will like to sell it for 120 dollar including OEM box, everything ALSO come with the SEIDIO case with clip. Please PM me for any question. Thanks

htc tytn ii touchscreen

I have Alex's Rom on my htc. It fell off my hand and broke the lcd, tried to replace it myself could not so took it to the local shop in Houston. They charged me $100 and replaced it with a new one. It was working fine for 2wks then i started having touch screen sometimes works sometimes does not issue. Could not even do ALIGN. The shop said that the screen and the flex card is fine but motherboard is messed up since he replaced it with his new one and it works.
I have already spent money on it and wondering is there any way to fix the touch screen without replacing motherboard. After he put it back I do not have any touch screen capability at all. He said he cannot do anything about it.
Need your suggestions what would you do with the device since without touchscreen it is very hard even to make a phone call with Alex's Rom?
If anyone wants to buy the device I am willing to sell it.
Try asking your device specific question in the forum for your device, you might be able to get more specific answers. And of course the Marketplace is the place to go if you want to sell it
you can get a used tilt / tytn II for about 100$ that works perfectly dont bother taking it back to that shop again.

Categories

Resources