Related
Hi all!
As many of you might already know we have gotten a HTC Magic here in Scandinavia without support for netfilter and iptables. I've been trying to recompile a new version of the kernel on my x86_64 Archlinux box while adding these lines to the .config which I exported from my rooted phone:
Code:
CONFIG_NETFILTER=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=Y
I am a n00b when it comes to compiling, booting and flashing Android stuff and not really a git wizard either. I've downloaded the source, cross-compiled it with my new .config and tried booting it with fastboot only to stare at the HTC logo for 15 minutes before giving up. I suspect that I have probably failed doing the right thing at more than one step in the process but have troubles finding a full guide for Android kernel hacking and loading on the web. I am not even sure if I really compiled the 2.6.27 version used in the daldroid build I have on the phone instead of the latest version in git.
I will provide the step-by-step details below.
1. Downloading and installing the CodeSourcery Cross-compiler from
HTML:
http://www.codesourcery.com/sgpp/lite/arm/portal/release858
2. Downloading setting up the android source code:
Code:
git clone git://android.git.kernel.org/kernel/msm.git
git checkout --track -b msm_htc origin/android-msm-2.6.27
git checkout -f
(here I noticed that the checkouts did not seem to download any extra code, is that expected?)
3. Setting up the cross compilation in the Makefile.
Code:
CROSS_COMPILE=../arm-2009q1/bin/arm-none-linux-gnueabi-
4. Using my .config when running make like this:
Code:
make zImage ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-
(a few additional options not present in the .config-file need to be manually specified before the build starts)
5. Extracting the ramdisk from the nordic daldroid boot.img:
Code:
split_bootimg.pl boot.img
5. Trying the new kernel with the daldroid ramdisk:
Code:
fastboot boot arch/arm/boot/zImage ../../boot.img-ramdisk.daldroid.gz
creating boot image...
creating boot image - 1634304 bytes
downloading 'boot.img'... OKAY
booting... OKAY
6. Fail
I would really appreciate some help to get this going. How can I confirm that 2.6.27 was really used? What other gotchas I have forgotten about?
CONFIG_MACH_SAPPHIRE=y
ridli said:
CONFIG_MACH_SAPPHIRE=y
Click to expand...
Click to collapse
Hmm, unfortunately this option is already set to true.
Perhaps it is mainly a fastboot problem. I dunno.
maybe but why you dont try to make a boot.img and flash it?
did you set the system type to msm? it is important.
copy here your .config, maybe we can try to see if something is wrong or you can do this.
Code:
make ARCH=arm CROSS_COMPILE=../arm-2009q1/bin/arm-none-linux-gnueabi- msm_defconfig
for do a default msm .config.
For what I've seen, you're not making a kernel+ramdisk image, but loading them both splitted. Maybe you're missing the command line parametters?
Also, you can patch the kernel code to make it light up one of the leds so you can know if at least the kernel is actually booting or is getting stucked somewhere. To make this, you can patch, on board-sapphire.c, the init function:
Code:
static void __init sapphire_init(void)
{
int rc;
printk("sapphire_init() revision = 0x%X\n", system_rev);
/*
* Setup common MSM GPIOS
*/
config_gpios();
msm_hw_reset_hook = sapphire_reset;
msm_acpu_clock_init(&sapphire_clock_data);
/* adjust GPIOs based on bootloader request */
printk("sapphire_init: cpld_usb_hw2_sw = %d\n", cpld_usb_h2w_sw);
gpio_set_value(SAPPHIRE_GPIO_USB_H2W_SW, cpld_usb_h2w_sw);
[] INSERT HERE:
gpio_set_value(SAPPHIRE_CPLD_LED_BASE+XX, 1);
Where XX is the led number you want to enable.
Any progresses ?
shwan_3 said:
Any progresses ?
Click to expand...
Click to collapse
Not yet, but the posts above are encouraging. I'll post my .config below.
My .config
I stripped all the '#' commented lines from the file to have it go below the 1000 lines limit.
Code:
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_OPROFILE_ARMV6=y
CONFIG_OPROFILE_ARM11_CORE=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_PANIC_TIMEOUT=5
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_ASHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_DEFAULT_AS=y
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
CONFIG_ARCH_MSM7XXX=y
CONFIG_ARCH_MSM7201A=y
CONFIG_MACH_TROUT=y
CONFIG_MACH_SAPPHIRE=y
CONFIG_HTC_BATTCHG=y
CONFIG_HTC_PWRSINK=y
CONFIG_MSM_AMSS_VERSION=6225
CONFIG_MSM_AMSS_VERSION_6225=y
CONFIG_MSM_AMSS_SUPPORT_256MB_EBI1=y
CONFIG_MSM_DEBUG_UART_NONE=y
CONFIG_MSM7XXX_USE_GP_TIMER=y
CONFIG_MSM7XXX_SLEEP_MODE_POWER_COLLAPSE_SUSPEND=y
CONFIG_MSM7XXX_SLEEP_MODE=0
CONFIG_MSM7XXX_IDLE_SLEEP_MODE_POWER_COLLAPSE=y
CONFIG_MSM7XXX_IDLE_SLEEP_MODE=1
CONFIG_MSM7XXX_IDLE_SLEEP_MIN_TIME=20000000
CONFIG_MSM7XXX_IDLE_SPIN_TIME=80000
CONFIG_MSM_IDLE_STATS=y
CONFIG_MSM_IDLE_STATS_FIRST_BUCKET=62500
CONFIG_MSM_IDLE_STATS_BUCKET_SHIFT=2
CONFIG_MSM_IDLE_STATS_BUCKET_COUNT=10
CONFIG_MSM_FIQ_SUPPORT=y
CONFIG_MSM_SERIAL_DEBUGGER=y
CONFIG_MSM_SMD=y
CONFIG_MSM_ONCRPCROUTER=y
CONFIG_MSM_RPCSERVERS=y
CONFIG_MSM_CPU_FREQ=y
CONFIG_MSM_CPU_FREQ_MSM7K=y
CONFIG_MSM_CPU_FREQ_SCALING_MAX=528000
CONFIG_MSM_CPU_FREQ_SCALING_MIN=384000
CONFIG_MSM_HW3D=y
CONFIG_MSM_ADSP=y
CONFIG_HTC_HEADSET=y
CONFIG_HTC_ACOUSTIC=y
CONFIG_WIFI_CONTROL_FUNC=y
CONFIG_WIFI_MEM_PREALLOC=y
CONFIG_CPU_32=y
CONFIG_CPU_V6=y
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V6=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_ARM_THUMB=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_ALIGNMENT_TRAP=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEFAULT_GOV_MSM7K=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_MSM7K=y
CONFIG_BINFMT_ELF=y
CONFIG_PM=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HAS_WAKELOCK=y
CONFIG_HAS_EARLYSUSPEND=y
CONFIG_WAKELOCK=y
CONFIG_WAKELOCK_STAT=y
CONFIG_USER_WAKELOCK=y
CONFIG_EARLYSUSPEND=y
CONFIG_FB_EARLYSUSPEND=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_NETFILTER=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_ANDROID_PARANOID_NETWORK=y
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_HIDP=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_LL=y
CONFIG_FIB_RULES=y
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_MSM_NAND=y
CONFIG_BLK_DEV=y
CONFIG_MISC_DEVICES=y
CONFIG_ANDROID_PMEM=y
CONFIG_TIMED_OUTPUT=y
CONFIG_TIMED_GPIO=y
CONFIG_BINDER_IPC=y
CONFIG_KERNEL_DEBUGGER_CORE=y
CONFIG_LOW_MEMORY_KILLER=y
CONFIG_LOGGER=y
CONFIG_ANDROID_RAM_CONSOLE=y
CONFIG_ANDROID_RAM_CONSOLE_ENABLE_VERBOSE=y
CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION=y
CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_DATA_SIZE=128
CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_ECC_SIZE=16
CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_SYMBOL_SIZE=8
CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_POLYNOMIAL=0x11d
CONFIG_HAVE_IDE=y
CONFIG_MD=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=y
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_PPP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_SLHC=y
CONFIG_MSM_RMNET=y
CONFIG_INPUT=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYRESET=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ELAN_I2C_8232=y
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_GPIO=y
CONFIG_INPUT_KEYCHORD=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CLOCK_CONTROL=y
CONFIG_SERIAL_MSM_RX_WAKEUP=y
CONFIG_SERIAL_MSM_HS=y
CONFIG_UNIX98_PTYS=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_MSM=y
CONFIG_SENSORS_AKM8976=y
CONFIG_SENSORS_PCA963X=y
CONFIG_SENSORS_MT9T013=y
CONFIG_SENSORS_MT9P012=y
CONFIG_POWER_SUPPLY=y
CONFIG_SSB_POSSIBLE=y
CONFIG_DAB=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MSM=y
CONFIG_FB_MSM_LOGO=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_FUNCTION=y
CONFIG_USB_FUNCTION_MSM_HSUSB=y
CONFIG_USB_FUNCTION_ADB=y
CONFIG_USB_FUNCTION_MASS_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_EMBEDDED_SDIO=y
CONFIG_MMC_PARANOID_SD_INIT=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_PARANOID_RESUME=y
CONFIG_MMC_MSM7XXX=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_CPLD=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_SLEEP=y
CONFIG_SWITCH=y
CONFIG_SWITCH_GPIO=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_INTF_ALARM=y
CONFIG_RTC_DRV_MSM7XXX=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FAT_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_YAFFS_FS=y
CONFIG_YAFFS_YAFFS1=y
CONFIG_YAFFS_YAFFS2=y
CONFIG_YAFFS_AUTO_YAFFS2=y
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_SG=y
CONFIG_FRAME_POINTER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_HW=y
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
biktor_gj said:
For what I've seen, you're not making a kernel+ramdisk image, but loading them both splitted. Maybe you're missing the command line parametters?
Where XX is the led number you want to enable.
Click to expand...
Click to collapse
Yeah, that could be a problem. I was under the impression that fastboot built the boot.img itself before transfering the kernel to the phone.
Interesting test with the leds. I'll check it out if I don't solve this.
I'm working on the exact same thing. can you contact me via im? pm for my screen names
I think that HTC patched some things in that are not available in the source tree... So I doubt that you'll be able to get a kernel running build from source. If you do happen to make it run let us know
Amon_RA said:
I think that HTC patched some things in that are not available in the source tree... So I doubt that you'll be able to get a kernel running build from source. If you do happen to make it run let us know
Click to expand...
Click to collapse
I would not be suprised at all if that was the case. However, since the Linux kernel is GPL, such patches, as I understand it, also need to be under the GPL and made available upon request. Is there a public HTC source tree anywhere?
And btw, how can I fix the "recompile" misspelling in the title of this thread? It is driving me insane
This might be a very stupid question, but here it goes:
Shouldn't it be possible to build all the extra netfilter/iptables support for the vanilla 2.6.27 kernel as modules and insmod them when running HTC's kernel? Or will that result in swift and horrible death?
i don't see why it wouldn't. we wouldn't need the source for htc's kernel then, right? just figure out how to build the modules? isn't that kind of how proprietary video drivers work for linux?
EDIT: Modules will work, that is certain. A little googling confirmed that's how wlan and such work (on Android)
EDIT 2: It seems like there is .config for the kernel on the phone that can be used with the standard 2.6.27 kernel source to build the android kernel.
EDIT 3: found the kernel here http://github.com/zhoukejun/android-2.6.27-yf255/tree/master
sammypwns said:
i don't see why it wouldn't. we wouldn't need the source for htc's kernel then, right? just figure out how to build the modules? isn't that kind of how proprietary video drivers work for linux?
EDIT: Modules will work, that is certain. A little googling confirmed that's how wlan and such work (on Android)
EDIT 2: It seems like there is .config for the kernel on the phone that can be used with the standard 2.6.27 kernel source to build the android kernel.
EDIT 3: found the kernel here http://github.com/zhoukejun/android-2.6.27-yf255/tree/master
Click to expand...
Click to collapse
I wonder if access to the kernel can help with the Bluetooth problems in the Hero ROM?
Bump!
Is there any news about iptables on PVT 32A based sapphire?
gboddina said:
Bump!
Is there any news about iptables on PVT 32A based sapphire?
Click to expand...
Click to collapse
Well. The kernels that we successfully have built by cross-compiling refuse to boot. Looking at the config.gz that the phone exports and trying
Code:
make oldconfig
we have learnt that HTC has a lot of parameters specified for code that appears not to be in the standard android 2.6.27 kernel source tree. We would be very very happy if someone around here could point us to the repository holding HTC specific patches and code for the Magic/Sapphire.
Based on http://www.mail-archive.com/[email protected]/msg00442.html , it seems we need to find the source of the android-msm-htc-2.6.27 kernel.
Which don't seems to be public.
gboddina said:
Based on http://www.mail-archive.com/[email protected]/msg00442.html , it seems we need to find the source of the android-msm-htc-2.6.27 kernel.
Which don't seems to be public.
Click to expand...
Click to collapse
But it has to be made public if requested. That is essence of the GPL.
i emailed them a while ago. i also talked to someone who has gotten his own kernels to boot but on the dream dev phone
Hi guys!
Someone requested a tutorial on how to build the kernel source code, so I thought I might as well do it I'll give you a bit more information too.
Maybe this will kick start kernel development a little bit too. Who knows.
Anyway:
1. Set up your build environment as per this guide by AOSP here: http://source.android.com/source/initializing.html
This guide will be primarily aimed at Ubuntu, but it should be easy enough to do on other Linux PCs. Ubuntu is highly recommended. And don't ask about Windows.
2. Download the toolchains: http://code.google.com/p/rohan-kernel-evita/downloads/detail?name=toolchains.tar.gz&can=2
I've hosted both GCC 4.4 and GCC 4.6 (prebuilt) on my Google Code page. These are for Linux.
Download the toolchain package here: http://code.google.com/p/rohan-kernel-evita/downloads/detail?name=toolchains.tar.gz&can=2
Then un-tar the archive and extract it to your home folder so that the path to the toolchain directories are ~/toolchain/whatever-one-you-want
3. At this point you can decide which kernel source you want to download. There are really two sources.
The first choice is getting it from HTC Dev directly. This is good if you want to build your kernel for a Sense 4 ICS ROM. If you want to build for AOSP/JB, then scroll down below all the following HTC stuff.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
To use HTC's source:
Go to HTCdev.com and make an account. Then download the source code for our device (I'd recommend the "One X" source under carrier "AT&T" version "2.20". Let the zip file download and extract it to your home folder (so the path is /home/user/evita-ics..../
To build HTC's source, run these commands:
Code:
cd ~/evita-ics-whatever_the_directory_is_named
export ARCH=arm
make elite_defconfig
Second command is saying what type of architecture we want (we are compiling for ARM processors, so we want ARM)
Third command is saying to make the default config for our device (whose hardware is codenamed "elite")
Then to build the actual kernel:
Code:
make -j# ARCH=arm CROSS_COMPILE=~/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
In the command above, there is "-j#". Replace the "#" with the number of CPUs you have.
Ask me about it if you need help. That should be it! Let the build go and in a few minutes you should have a zImage file located at ~/evita-ics-..../arch/arm/boot. That is the actual kernel.
To test out the zImage (kernel), connect your device via fastboot mode and type:
Code:
fastboot boot /path/to/zImage
Combined with the ramdisk, thats what makes the boot.img file. Eventually if you want to distribute your kernel, you should use an installer that injects the zImage into the boot.img or combine the zImage with a ramdisk to make a boot.img. I can do a tutorial on that later on as well.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
To get the "other" source:
This source is based off of HTC's source and includes other devices as well in it (the One S and Evo 4G LTE). Its good if you want to build JB AOSP kernels.
To download this kernel source do this:
Code:
mkdir ~/kernel
cd ~/kernel
git clone https://github.com/CyanogenMod/android_kernel_htc_msm8960.git -b android-msm-evita-3.0
This version also includes a number of optimizations and odd bug fixes present in the HTC version.
To build this second source, run these commands:
Code:
cd ~/kernel/android_kernel_htc_msm8960
export ARCH=arm
make elite_defconfig
Second command is saying what type of architecture we want (we are compiling for ARM processors, so we want ARM)
Third command is saying to make the default config for our device (whose hardware is codenamed "elite")
Then to build the actual kernel:
Code:
make -j# ARCH=arm CROSS_COMPILE=~/toolchain/arm-linux-androideabi-4.6/bin/arm-eabi-
In the command above, there is "-j#". Replace the "#" with the number of CPUs you have.
Ask me about it if you need help. That should be it! Let the build go and in a few minutes you should have a zImage file located at ~/evita-ics-..../arch/arm/boot. That is the actual kernel.
To test out the zImage (kernel), connect your device via fastboot mode and type:
Code:
fastboot boot /path/to/zImage
Combined with the ramdisk, thats what makes the boot.img file. Eventually if you want to distribute your kernel, you should use an installer that injects the zImage into the boot.img or combine the zImage with a ramdisk to make a boot.img. I can do a tutorial on that later on as well.
-----------------------------------------------------------------------------
The second option is also a bit better as it uses the 4.6 toolchain instead of GCC 4.4. HTC's source doesn't work with GCC 4.6 so it can't be used without changes that the second source has.
If you have any questions, feel free to post here, message me on twitter (@rohanXm), chat me on IRC (#HTC-One-XL) or PM me!
If this helped you, please consider hitting the donation link under my username on the left. Donations are never required but always appreciated.
Instead of downloading cm10 the readme inclided with the HTC source has directions for getting a tool chain which will compile the source.
Sent from my HTC One X using Tapatalk 2
Perfect. Now I just have to read.
Sent from my HTC One XL bumping it
rohan32 said:
Code:
repo init -u git://github.com/CyanogenMod/android.git -b jb
Click to expand...
Click to collapse
FYI, It looks like the branch name has changed. When I changed "jb" to "jellybean" the repo init command worked.
Rohan. You are one bad MF'er
Sent from my twin turbo'ed OneXL rocking rezound beats
rohan32 said:
2. You can either try to find a standalone package of the precompiled toolchain, or you are going to need to download a ROMs source. I'd recommend downloading a ROMs source since I've never found a good toolchain that worked for me. If you find one that works, post below
For now we will download CM10 since that seems like the defacto standard.
Click to expand...
Click to collapse
I downloaded the 2.20.502.7 kernel source and when I extracted it there was a file named evita_readme.txt which gave another, possibly more "official", location for downloading a toolchain:
--Please follow below command to download the official android toolchain: (arm-eabi-4.4.3)
git clone https://android.googlesource.com/platform/prebuilt
Click to expand...
Click to collapse
I just performed a build with this toolchain but got this error when I attempted to load zImage via fastboot:
c:\>fastboot flash boot zImage
sending 'boot' (5140 KB)...
OKAY [ 1.044s]
writing 'boot'...
FAILED (remote: image error! (BootMagic check fail))
finished. total time: 1.077s
Click to expand...
Click to collapse
I'm not sure if this is caused by the toolchain or if I screwed something up. Have you ever seen this error before?
EDIT: Ok I see what I did incorrectly. The zImage needs to be "Combined with the ramdisk". You wouldn't know how to perform this operation... would you?
denversc said:
I downloaded the 2.20.502.7 kernel source and when I extracted it there was a file named evita_readme.txt which gave another, possibly more "official", location for downloading a toolchain:
I just performed a build with this toolchain but got this error when I attempted to load zImage via fastboot:
I'm not sure if this is caused by the toolchain or if I screwed something up. Have you ever seen this error before?
EDIT: Ok I see what I did incorrectly. The zImage needs to be "Combined with the ramdisk". You wouldn't know how to perform this operation... would you?
Click to expand...
Click to collapse
You are trying to flash a zImage
To my knowledge, only booting zImages work on this device. For the time being just boot the zImage (use fastboot boot zImage)
I will make a tutorial on how to combine the zImage created with a ramdisk to make a boot.img when I get the chance
denversc said:
FYI, It looks like the branch name has changed. When I changed "jb" to "jellybean" the repo init command worked.
Click to expand...
Click to collapse
Oops, my bad! That was a mistake. AOKP uses -jb and CM uses -jellybean so I got them switched fixed now
Out of any device I've seen more people actually interested in helping and learning to help then any other community. I've watched noobs become less noobish.. I've watched skizz learn how to make themes. Hell I've learned 10 fold what I knew before this phone myself.
That is beautiful, and now such an informed, helpful post such as this.
Have great Sunday you guys! I think I might give this a shot!
Sent from my One X
I'll streamline this process in a bit, so that you don't need to download CM10
Edit: cleaned up post, now I'm uploading just the toolchains. Its a tar.gz archive, around 150mb. Much better than downloading the entire CM10 source
rohan32 said:
You are trying to flash a zImage. To my knowledge, only booting zImages work on this device. For the time being just boot the zImage (use fastboot boot zImage)
Click to expand...
Click to collapse
Thanks for your response, rohan. You are absolutely right: I was incorrectly attempting to flash zImage straight to the boot partition, and the error produced by flashboot was justified. I have since successfully "tested out" my compiled zImage by flashing it via "fastboot boot zImage" and it worked like a charm! I ported the modifications from sbryan's Blackout BeastMode kernel and I am now able to OC to 2106 MHz and UC to 192 MHz. It's been running solid for the past few hours at least
Of course, the kernel reverts back to the one stored in the boot partition after a reboot, and I want my shiny new kernel to "stick". I've done a bit of research on this topic and found some information about combining my zImage with a ramdisk into a "real" boot.img but have not yet been successful in creating a boot.img which does not bootloop after flashing it.
For example, I found an article on xda called Basic Kernel Kitchen for Minor Kernel Tweaking which points to a "kitchen sink" tool for creating a boot.img from a zImage and a ramdisk. My problem is that I don't know where to get or how to make a ramdisk. So I tried using the ramdisk from the boot.img of the ROM that I am currently running (CleanROM 4.5 DE) but just got into a bootloop. I've since been doing some yard work today so haven't gotten back to investigating further.
I also found another program named abootimg which can also produce a boot.img from a zImage abd a ramdisk, but when I tried it an error message about my zImage being "too big" was produced.
If it's not obvious yet, I am kind of fumbling around in the dark as compiling and deploying custom kernels is completely new to me! But this post was the most valuable resource I've come across in getting to this point. Thanks so much for writing it! I eagerly await your next article about creating the boot.img
---------- Post added at 06:05 PM ---------- Previous post was at 05:50 PM ----------
rohan32 said:
cleaned up post
Click to expand...
Click to collapse
Thanks for cleaning up the post rohan. I have a few follow-up questions/comments:
missing toolchains link -- the post says "Download the toolchains:" but there is no link to download anything... did you forget to paste the link?
official toolchain -- That's great that you uploaded the toolschains to save tonnes of bandwidth. The CM10 source was taking a VERY long time for me to grab. However, I imagine some people (like me) would prefer to get the toolchain from an "official" source. In the "evita_readme.txt" file of the kernel sources downloaded from HTC dev it instructs one to use the official sources from "git clone https://android.googlesource.com/platform/prebuilt". This is the toolchain that I used and it successfully built the zImage.
ko files -- I noticed in the ZIP file for Blackout BeastMode, in additional to installing the zImage it also puts a bunch of "ko" (kernel modules I believe) into the /system partition (eg. qce40.ko). Should I also be deploying .ko files from my build to the device?
Thanks!
denversc said:
Thanks for your response, rohan. You are absolutely right: I was incorrectly attempting to flash zImage straight to the boot partition, and the error produced by flashboot was justified. I have since successfully "tested out" my compiled zImage by flashing it via "fastboot boot zImage" and it worked like a charm! I ported the modifications from sbryan's Blackout BeastMode kernel and I am now able to OC to 2106 MHz and UC to 192 MHz. It's been running solid for the past few hours at least
Of course, the kernel reverts back to the one stored in the boot partition after a reboot, and I want my shiny new kernel to "stick". I've done a bit of research on this topic and found some information about combining my zImage with a ramdisk into a "real" boot.img but have not yet been successful in creating a boot.img which does not bootloop after flashing it.
For example, I found an article on xda called Basic Kernel Kitchen for Minor Kernel Tweaking which points to a "kitchen sink" tool for creating a boot.img from a zImage and a ramdisk. My problem is that I don't know where to get or how to make a ramdisk. So I tried using the ramdisk from the boot.img of the ROM that I am currently running (CleanROM 4.5 DE) but just got into a bootloop. I've since been doing some yard work today so haven't gotten back to investigating further.
I also found another program named abootimg which can also produce a boot.img from a zImage abd a ramdisk, but when I tried it an error message about my zImage being "too big" was produced.
If it's not obvious yet, I am kind of fumbling around in the dark as compiling and deploying custom kernels is completely new to me! But this post was the most valuable resource I've come across in getting to this point. Thanks so much for writing it! I eagerly await your next article about creating the boot.img
---------- Post added at 06:05 PM ---------- Previous post was at 05:50 PM ----------
Thanks for cleaning up the post rohan. I have a few follow-up questions/comments:
missing toolchains link -- the post says "Download the toolchains:" but there is no link to download anything... did you forget to paste the link?
official toolchain -- That's great that you uploaded the toolschains to save tonnes of bandwidth. The CM10 source was taking a VERY long time for me to grab. However, I imagine some people (like me) would prefer to get the toolchain from an "official" source. In the "evita_readme.txt" file of the kernel sources downloaded from HTC dev it instructs one to use the official sources from "git clone https://android.googlesource.com/platform/prebuilt". This is the toolchain that I used and it successfully built the zImage.
ko files -- I noticed in the ZIP file for Blackout BeastMode, in additional to installing the zImage it also puts a bunch of "ko" (kernel modules I believe) into the /system partition (eg. qce40.ko). Should I also be deploying .ko files from my build to the device?
Thanks!
Click to expand...
Click to collapse
Hey!
Sorry, set it to upload then got distracted Link posted
The reason why your boot.imgs bootloop is because there is a special ramdisk address that needs to be set when combining the ramdisk with the zImage, and most kitchens don't support this. You also need to set the address after setting the base value.
I will post a guide on how to make it a real boot.img whenever I get the chance.
I'm telling you people, Rohan is a BOSS. Most helpful dev I know.
Sent from my HTC One XL using xda app-developers app
rohan32 said:
Hey!
Sorry, set it to upload then got distracted Link posted
The reason why your boot.imgs bootloop is because there is a special ramdisk address that needs to be set when combining the ramdisk with the zImage, and most kitchens don't support this. You also need to set the address after setting the base value.
I will post a guide on how to make it a real boot.img whenever I get the chance.
Click to expand...
Click to collapse
I have the zImage thanks to your tutorial, but I want to know how to create the kernel zip, whenever you have time will be amazing if you can post a guide, I'm really looking forward to that guide, because i haven't been able to locate a guide that works
Sent from my HTC One XL using xda premium
rohan32 said:
Hi guys!
Second command is saying what type of architecture we want (we are compiling for ARM processors, so we want ARM)
Third command is saying to make the default config for our device (whose hardware is codenamed "elite")
Then to build the actual kernel:
Code:
make -j# ARCH=arm CROSS_COMPILE=~/toolchain/arm-linux-androideabi-4.6/bin/arm-eabi-
Click to expand...
Click to collapse
This is the correct make for "other source" kernel.
Code:
make -j# ARCH=arm CROSS_COMPILE=~/toolchain/arm-linux-androideabi-4.6/bin/[COLOR="Red"]arm-linux-androideabi-[/COLOR]
Can you make a tutorial on how to insert governors into a kernel?
Compiling problem
Hey man,
Please help me I followed your article but when I try copile with:
make -j2 ARCH=arm CROSS_COMPILE=~/toolchain/arm-eabi-4.4.3/bin/arm-eabi
I got something like this:
/home/martin/toolchain/arm-eabi-4.4.3/bin/../lib/gcc/arm-eabi/4.4.3/../../../../arm-eabi/bin/as: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
Thanks
UPDATE:
now its work
I went deeper and install lib32z1 with "sudo apt-get install lib32z1"... now its work
My device repositories are not available on github, But I got device tree and vendor blobs by making changes in similar device repo. That reference device's kernel's lineageos_defconfig is situated in htc msm8974 kernel repo. So how can I get lineageos_defconfig for my device, and which other my device related kernel files(.dtsi or any other) I have to push in htc msm8974 repo and get those files to make things ready for build?
Please help......
As I'm sure many will know Telechips do not release their SDK or linux BSP to people without buying and expensive development board and commitment to buying vast amounts of chips.
I have a cx-01 and the device is crippled on kernel features and force loading of kernel modules is disabled by default.
cnxsoft had some information regarding the kernel source release, but without framework recompile it won't boot.
Android source will give me the envsetup.sh, but misses the telechips profile out.
I wondered if anyone has the telechips 8923 folder in WORKING_DIRECTORY/device -if so where did you get it and can I have a copy.
Failing that I have a decompiled system image for the cx-01 and a copy of telechips 8902 profile-I wondered if it is possible to create a working tcc8923 with these?
I notice back in January nobody had a working custom kernel for this processor- am I barking up the wrong tree?
To build Android from source for a new device, you need to set up a board config and its makefiles. This is generally a long and tedious process. Luckily, if you are only building recovery, it is a lot easier. From the root of your Android source directory (assuming you've run envsetup.sh), run the following (substituting names appropriately): ( I gues envsetup.sh means running: 1: . build/envsetup.sh
2: lunch 3: 1 (my choice) 4: make m805_892x my tablet type)
build/tools/device/mkvendor.sh device_manufacturer_name device_name /your/path/to/the/boot.img
For my Tom-Tec 7 excellent, the command will go as follows :
Code:
build/tools/device/mkvendor.sh YG m805_892x ~/boot.img
> ore: build/tools/device/mkvendor.sh YG m805_892x ~/recovery.img
the later needed kernel is in recovery.img it seems.
Please note that m805_892x is the device name..... Only use "~/boot.img" if you have the boot image in your home directory. Or else please specify the correct path.
You will receive the confirmation "Done!" if everything worked. The mkvendor.sh script will also have created the following directory in your Android source tree:
manufacturer_name/device_name
YG/m805_892x
Sow get youŕe recovery.img and use that to get WORKING_DIRECTORY/device/YG/m805_892x
Device name is in build.prop
Try this link to see what it makes from the board config and its makefiles http://builder.clockworkmod.com
Personally i´m still stuck making a cwm recovery thats works 100% on my tablet.
I build from CWM source.
some links:
>> Porting CWM to other devices Part 2 (OS X): http://www.acsyndicate.net/how-to-porting-cwm-to-other-devices-os-x-part2/
wiki: http://forum.xda-developers.com/wiki/ClockworkMod_Recovery
http://forum.xda-developers.com/showthread.php?t=1337786
http://www.twobitcoder.com/?p=158
tcc TCC8902/TCC8803 tablets http://forum.xda-developers.com/showthread.php?t=1101094
> http://forum.xda-developers.com/showthread.php?t=1866545
http://forum.xda-developers.com/showthread.php?t=1026853
make recovery: http://www.koushikdutta.com/2010/10/porting-clockwork-recovery-to-new.html
[INTRO]
Well, hello there stranger.
This is a development only thread. If you are having a problem building, installing, using the kernel or it's source code, please turn to the Q&A Thread.
If you found a bug and have a log from dmesg or logcat, or have a patch, this is where to comment on development activities.
I'm trying to keep this a short OP, because you all know the problems we've had in the past with this kernel, so @jeffsf and myself are going through the stock drop and cleaning out any unused code so we can easily port forward and possibly figure out aries kernel issues.
Currently, as you can see in the OP title, this is for GingerBread. I know, nothing terribly new. But that tag will change. Right now, it's in the cleanup phase. This OP will probably change a lot to keep up to date with the development conversations that will follow in this thread.
I've already started a bunch of work, but I'm always open to help.
[GOALS]
Clean out any code that is different from v2.6.35.7 that has nothing to do with SGS4G.
Clean up code that is different (inline) to use "#if defined" so that this platform could be disabled, and another platform could be enabled cleanly with Kconfig. (think about multiple phones in one source tree...)
Once code is cleaned up (section mismatches removed, warnings caused by code we've added, etc..) and tested, porting to newer kernel versions like 3.0.x and 3.4.x becomes much easier.
If you plan on helping out, I have a few rules:
This is a long term project. I'm looking at 3.4.x and 3.10.x android kernels. You won't find fancy bells and whistles here. As this project progresses, releases will be cut. At release points, other developers are welcome to fork and add features. I will start different branches for 'porting' and for 'features' to keep track of the two activities so we can keep moving forward.
Every commit must be tested. Make sure it boots, and area's you've affected work properly. No new build warnings or section mismatches.
Try to keep your commits targeted... An example of a non targeted commit was the v2.6.35.7 merge I made. I also cleaned up a few things that should have been done in separate commits. Oh well. The rest of the commits I made were exactly what I mean.
make it awesome, I think this device can keep working for a while and be up to date!
Try to use ./scripts/checkpatch.pl to check the changes you made to a file. Fix the errors and warnings, only on code you have changed. If it is a lint error/warning in code that is upstream code, leave it alone. We are not maintaining the kernel, we are only maintaining the changes we are making to it.
Either use 'git format-patch' to send me patches or fork the repo, make changes to your local fork, and open a pull request.
[PROGRESS]
I've cleaned out a ton of other platform cruft that has nothing to do with SGS4G, as seen here.
I tried to merge 2.6.35.14, but tfsr broke. So moving to MTD.
It would be nice to not have to rebuild a ROM over and over. Anyone feel up for making a GB MTD rom?
[BUILDING]
I use linux to build. Other platforms: Your Mileage May Vary!
Code:
sudo mkdir -p /build/galaxys4gmtd /opt
sudo chown -R $(id -un):$(id -gn) /build /opt
curl -O ~/Downloads/arm-2009q3-67-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 http://sourceforge.net/projects/bhundven.u/files/arm-2009q3-67-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2/download
cd /opt
tar jxf ~/Downloads/arm-2009q3-67-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
cd /build/galaxys4gmtd
git clone https://github.com/bhundven/android_kernel_samsung_galaxys4gmtd
git clone https://github.com/bhundven/android_initramfs_samsung_galaxys4g
cd android_kernel_samsung_galaxys4gmtd
git checkout -b android-samsung-2.6.35-galaxys4g-scrub-deux origin/android-samsung-2.6.35-galaxys4g-scrub-deux
./build.sh
the file in 'out/galaxys4g/arch/arm/boot/zImage' is the kernel image you'd flash to the kernel partition.
[BRANCHES]
I have a few guidelines for branching and branch names.
Name them what they are. Long branch names allow everyone to read it and know what it is.
A few of them are upstream like 'linux-2.6.35.7' is a branch of the tag 'v2.6.35.7'.
Ones that are named too similarly, like the aosp and cyanogen(aries) 2.6.35 samsung kernels get the name prepended for clarity:
Code:
cm-aries_android-samsung-2.6.35
aosp_android-samsung-2.6.35-gingerbread
As for working branches, I name it:
android-samsung-<version>-<board>-<branch topic>
Where version would be the full minor version, like 2.6.35 or 3.0. Not the full version including the stable version number.
Board is the board name. 'galaxys4g' is what we've always used for BML kernels, and 'galaxys4gmtd' for MTD kernels.
This kernel will eventually be MTD, hence the repository name.
The branch topic is something you could describe in <= 3 words.
Current branch topics:
scrub: no numbers, so the original addition of the sgs4g code.
upgrade: merged in the linux-2.6.35.7 branch (technically, the v2.6.35.7 tag in this case)
scrub-deux: After merging v2.6.35.7, there are a few rather large commits with the initial source drop and file permission fixes that make it hard to diff through commits. This branch was branched from tag v2.6.35.7 and had the difference of 'linux-2.6.35.7..android-samsung-2.6.35-galaxys4g-upgrade' applied to HEAD. This allows us to start chopping up that one large patch into smaller commits that are more easily merged/rebased to other branches (for porting).
Future branches coming up will have to do with the results of cutting up the one patch. One for drivers (each driver), one for sound, one for architecture specific, etc.
Once things are broken down this way, a lot of code will have been cleaned up and as I said in the scrub-deux branch description, it will make merging, rebasing, and cherry-picking these changes for porting purpouses.
[RELEASES]
There are currently no planed releases.
Since it looks like I'll have to start moving to MTD sooner rather then later, I'm also looking at skipping ICS and JB, and going to KK.
As for testing the build, I'm using the Stock_KJ6_+_root-One-Click.jar
Let the rom settle after it boots up, and power it off. Heimdall flash the built zImage. TADA.
If you don't understand what I just said, don't forget to ask in the the Q&A Thread.
[SOURCE]
Source
Wiki
Issue Tracker
If you're interested in helping out, or just got here because you searched "flash kernel" or the like, I prefer heimdall to manage "raw" flashing. I find it to be very robust and also runs on Linux and Mac OS.
http://forum.xda-developers.com/showthread.php?t=755265
http://glassechidna.com.au/heimdall/
https://github.com/Benjamin-Dobell/Heimdall
This is not a one-click kind of thing (though you could use one of the one-click installers to get back to GB).
I'm a command-line guy for simple tasks, so I use (v1.3.x)
Code:
heimdall flash --kernel path/to/kernel/boot.img
Edit -- When I tried to flash on my Mac using v1.4.0 (ignoring @bhundven warnings in the next post), I found that I needed to match the returned PIT partition name to get it to work:
Code:
heimdall flash --KERNEL path/to/kernel/boot.img
Make sure for now that you only use the 1.3.1 version found here.
checkpatch.log
Attached to this post is the latest checkpatch.pl output of the files different from upstream.
Generated by:
Code:
for i in $(git diff --name-only linux-2.6.35.7..android-samsung-2.6.35-galaxys4g-upgrade); do
echo -e "\nRunning checkpatch.pl on: ${i}\n";
./scripts/checkpatch.pl -f ${i};
done 2>&1 | tee out/checkpatch.log
Hi guys,
I was working on this since some time and here it is
Please read FAQ first
FAQ :
Can I compile a MT6589 kernel for every phone ?
As you know, a MT6589 kernel won't fit in every MT6589 smartphone because of specific configs/files in the kernel source tree.
So, if you compile my kernel which is expected to work on a Faea F2S don't expect it to work on a Acer Liquid E3 for example.
Conclusion : You have to get the kernel source for your phone
How can I check my kernel source ?
Of course, this is not enough to see "source code for ZTE N986", you have to check if it's full or not and if it works.
Most people don't know what is working kernel source. You just have to read the GPL guidelines that every manufacturer have to complain with :
“ The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. ”
The part which has not to be included is the toolchain but there should reference to it (which toolchain to use)
For MT6589 kernel, the toolchains arm-eabi-4.6 and arm-linux-androideabi-4.6 should be used. (mtk used arm-linux-androideabi-4.6 for kernel but it should be arm-eabi-4.6)
So now you know which toolchain to grab and then for kernel source you have to check this minimal structure :
bionic
kernel
mediatek
build
config
custom
kernel
platformREADME
If I have kernel source, can I build it for my device ?
Erm... Sometimes the structure is here but the kernel source is messy... Why ?
Because you were not provided the matching source of the kernel used on your smartphone and the reasons are multiple (I won't give details).
So, the idea is to run a first build. If you get errors, then check the step above about toolchain and structure.
The next step for fixing errors is to play with source. Good luck for that.
What are the benefits of a custom kernel for MT6589 ?
First big benefit is to introduce kitkat compatibility because there was an issue on android binder driver in mtk kernel source.
Next benefit is to be able to remove some stuff from mtk which is useless on user side and waste ressources (a lot of debug for example).
Others benefits will be in optimizations or new features (see frandom for example)
HOWTO :
Build from my repo (specific devices supported) - It's not for compiling your kernel source but to understand how kernel build worksI explain how to build from my repo first because it can help you to understand how you should build kernel source
Prerequisites : A build environment (actually Ubuntu Saucy x64 with build-essentials, ccache, repo, java, perl v5.14+ and openssl) and I won't explain how to get one as there is multiple howto on the net.
For repo, the idea is to create a bin directory in your $HOME (usually /home/accountname/), copy repo binary inside it and then add this bin to $PATH var.
BE CAREFULL TO WHAT YOU DO WITH $PATH VAR ! I always see people doing :
Code:
export PATH=/home/foo/bin
this is erasing $PATH var, just check before and after with echo $PATH
So the idea is to introduce your path AFTER the actual $PATH var
This is easy...
Code:
export PATH=[COLOR="red"]$PATH:[/COLOR]/home/foo/bin
And of course, $PATH is reset once you close terminal and I won't explain how to set $PATH automatically.
Once you got this, everything should be working and it will be easy
Code:
mkdir workdir
cd workdir
repo init -u https://github.com/Dr-Shadow/android_kernel_mt6589_manifest.git -b master
repo sync
Then you should get this in your workdir :
kernel
manifest
mtk-tools
out
ramdisk
scripts
toolchainJust do :
Code:
cd kernel
./certificates.sh
./build.sh
./certificates.sh is needed only once (it's for signing flashable zip and it will setup some keys for it, just reply to questions and don't add passphrase)
And of course, the build.sh contains most things you need to know on steps for building kernel (which commands to use) and you need to know how it works Build from your own kernel source
I'm building the doc... I have to remind which vars need to be overriden
Reserved
Reserved #2
Thanks for making this thread brother it will help us to learn... Subscribed
Looking forward to the how-to to build with your own kernel source.
Dr-Shadow said:
Hi guys,
I was working on this since some time and here it is
Click to expand...
Click to collapse
Thank you Dr-Shadow! This is very cool. I'm going to try it out!
Great
It's always nice to see further development on MTK Based Devices.
Regards
I'll chip in and say thanks too. Finally getting around to trying to compile Alcatel's OneTouch Hero (aka TCL Y910) provided sources.
I might be in as well with A820, but I'm relatively new to Android and have only done porting of 4.1 and 4.2 so far.
Haven't built anything although I have some knowledge about the source code and SDK, which I've only used for reference purposes and the tools from it.
Will try to compile the stock kernel this weekend, but I'm not quite sure if something else is needed, even if the kernel source seems complete to me.
I'm a quick learner and have a lot of programming experience in other technologies, even thought I'm more of a front-end developer these days.