I'm using my HTC Universal since 2 years ago and it was already secondhand.
Does anyone know how to repair or reset the status of the part that makes it rotate? (sorry if I'm not understandable )
Thank you in advance,
Regards.
Sorry, you were not clear enough. What are you trying to achieve?
Do you mean the hinge part is broken and the LCD cannot be rotated? In which case hinge will need to be replaced, but they are difficult to find, sometimes they sell on eBay or you can purchase parts off someone selling his broken machine for parts, then use a Service Manual for disassembly instructions.
If you mean the screen orientation does not change when you rotate the screen, then you need to open the LCD side and check for a small magnet next to a screen, as it is the part responsible for rotation. However, sometimes the problem like that can be caused by software, so you need to be sure which one it is.
Thanks for your exhaustive reply! Yes, it's an hardware problem. I want not to be in condition of not rotating the display, so I'm looking for a solution for the hinge. Something I can do on my own.
What is exactly wrong with your hinge? How is it broken? Pictures would be helpful.
Related
Hello Friends,
yesterday when i saw the screen of my xda exec i saw a big black spot on the centre of the screen, not sure how it happened. i can still make calls from the phone.
but now i want to figure out whether i'll need to replace touchscreen or the LCD or both but i dont know how to figure out which one is broken.
Any help will be really appreciated on this.
Ashwani
Chances are
if the touch capability is intact, it's your LCD. The opposite, where the screen looks fine, but the touch is gone, would be your digitizer. However, unless you know how to replace a digitizer, I recommend getting both, LCD and a digitizer in one unit, rather than attempt to assemble the screen yourself. Which, judging by your question, is likely to be the case.
enigma1nz said:
.
Click to expand...
Click to collapse
I would only iterate what enigma1nz had to say . It's at least your LCD at fault, but buy both as one unit. Or, buy a Uni that guarantees a working LCD+Touch pad (ie, a Uni with only a broken broken mobo/usb/doesn't boot etc) from eBay or the like.
First of all, I would just take the screen part of the Uni apart and check all is tight when replacing, as if the LCD has no obvious cracks, it's very likely a rubber-strip contact or similar.
NB. If anyone is interested in purchasing a fully-working Uni (brand new casing), with a non-functional touch/digitizer (guaranteed working everything else incl. LCD), I'm about to put on eBay. (PM me)
I dropped my touch pro and cracked the screen in a few places. I think it works normally except for the screen, as it receives calls fine...
A new phone isn't in my budget right now. Does anyone know of a good place (hopefully in DC, MD or VA) that will supply or install a replacement touch screen?
(btw, no recent threads came up when I searched.)
Ebay!
Just looked, $30 including postage for a screen & digitiser if you are able to do it yourself.
How hard is it to replace a screen if it has surface damage? Is there anywhere i could find a walkthrough or help?
Shame man, its a tragedy of what happened to your phone...
Luckily its not too bad, and you may just be able to fix it. You can download the service manual for the phone here: http://htcwinmobile.blogspot.com/2009/03/htc-raphaeltouch-pro-service-manual.html
Just a note though, make sure you DO USE tweezers or something to get the speaker wires out of the way before snapping the enclosure back into position... I had to reopen the phone again, after powering it, to rejoin one of the little wires thats like a tenth of a millimeter thick DO NOT IGNORE ANYTHING THEY TELL YOU IN THE MANUAL. Oh, and what works well for the "plastic removal tool" is a cut out piece of plastic ice cream container. AGIAN, do not ignore anything in there... You are voiding the warranty permanently when you do it yourself (which you unfortunately have to).
Anyways, good luck!
I drop my phone also, but the screen didn't actually cracked! but I do have is problems with the screen in other ways! Sometimes I get a black screen when I turn on the phone and sometimes not, but when the screen turns on, it flickers a lot and have lines thru it. What suprises me is that sometimes I get perfect images on the screen (Which makes me think that the screen it's not damaged).
Any suggestion would be apreciated. Thanks!
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
a.mendoza said:
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
Click to expand...
Click to collapse
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
maxh said:
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
Click to expand...
Click to collapse
Thanks for the advice! I was thinking on that also and wanted to take my chances opening the phone (oh god!).
BTW, I saw the $30 LCD Screen+Digitizer combo on ebay that Beeble referred to, but I'm not sure if it fits on the fuze (my model). What have come to my mind it's to buy also the front camera of the phone (like a thread on the kaiser) to mod the cell, in case I need to buy the screen+digitizer. I've search all threads about this issue but nobody has done it because it was too expensive for the result; I believe with this price it's worth it right now!
solved
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
I used Diamod (!) LCD and Touch Pro digitiser. Works perfect.
Much more cheaper
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
-G-Rey--- said:
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
Click to expand...
Click to collapse
WOW! What a long way to get to the screen. Good luck for everyone who tries to dismount and mount the Raphael.
maxh said:
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
Click to expand...
Click to collapse
Thanks for the advise maxh,
I just wanted to let you know that a miracle just happened! my cellphone started to work just fine without even opening the phone! it has more than a week on this situation so I believe that it's exactly what you stated (the LCD conector became unseated or loose). Since it's still working, I have no need to open it! so I'll just wait until it becomes defective again and at that point just open it and tight up the LCD connector!
Anyway, I would love if somebody could make the mod that I was refereing to before (changing the screen of the fuze by the touch pro one) and see if it's possible to attach the front camera on the fuze.
Once again, thanks everybody for your opinions.
I got my new display+ digitizer on Ebay (65$) and replaced it, using the russian link mentioned above ( follow the exact procedure) , it took me 2 hours to do it, and after lot of patience it worked! My problem was the digitizer never worked fine, and after replaced it it worked like never before. If You are not familiar with repairs, it will be a mistake and waste of money to buy a display without digitizer. NOW, I have a small problem, my display has a NEW color, it's like color temp is WARM for this display, and COLD for my old display, AND COLOR level is lower, and the result is display without vivid colors, black like gray. Is there any way to change the DISPLAY color settings?
Hi all,
my tg01 has a large rainbow patch on the screen, and it is sometimes visable even when the back light is on,
i was wondering if replacing the screen would solve this problem?
and if this is the solution is this the right part i should order?
http://www.dhgate.com/touch-screen-...touch/p-ff80808127dc41170127f5e7eb076371.html
Sturgie said:
Hi all,
my tg01 has a large rainbow patch on the screen, and it is sometimes visable even when the back light is on,
i was wondering if replacing the screen would solve this problem?
and if this is the solution is this the right part i should order?
http://www.dhgate.com/touch-screen-...touch/p-ff80808127dc41170127f5e7eb076371.html
Click to expand...
Click to collapse
The part you have linked to is just the Digitiser (incidentaly not apparently identical to the TG01) - the resistive matrix pad which sits over the actual LCD and provides the 'touch' x-y grid information to the processor.
A rainbow patch suggests one of three things:
1. a point of pressure which is distorting the LCD screen under the digitiser
2. possibly a crack in the actual glass
3. inward distortion in the digitiser causing it to press against the LCD glass
I'd look closely first to see if you have anything eg. between the battery and the body which might be causing such pressure forwards; then check the digitiser to see if the surface appears bowed inwards and finally examine closely for any crack.
It may be that a new digitiser would solve; but if there is a crack in the LCD glass then I'm afraid only a replacement screen will solve.
Good luck !
Thanks for your help
i will look into it more
but i think its because of the screen being exposed to a point of pressure because lately i have been keeping it in my trouser pocket along side my ipod which i think has created the rainbow patch
I found something like this.
http://global.ebay.com/Original_Toshiba_TG01_TG_01_Touchpad_Cover_Touchscreen/360240918756/item
maybe it helps
alternative solution
If someone in Italy have broken his TG01 and want to sell, i'm online, my tg 01 need a new mainboard....
Thanks
Alessandro
why not try
Finally, you buy it?
stay away!
I think we can try
I think we can try
I feel good
I feel good,But still have to see your own ideas
Identified this problem?
Identified this problem?
I will ask a very stupid question... can I put some other device touch screen or like to put REGZA the tg03 capacitive screen? u dont need drivers for that just that screen fits?
nikola92 said:
I will ask a very stupid question... can I put some other device touch screen or like to put REGZA the tg03 capacitive screen? u dont need drivers for that just that screen fits?
Click to expand...
Click to collapse
Most unlikely that it would be practicable to transplant a capacitive screen. The resistive digitiser on the TG01 screen has a dedicated ribbon cable interfacing to the main board providing X-Y information; even if the capacitive substitute had a similar connector, the hardware on the main board will not be able to interpret the signal. And I am sure that there will be different drivers for the capacitive screen, even though performing the same function.
I would have to ask though why the desire to go capacitive ? The resistive screen (properly calibrated) gives virtualy the same responsiveness with the massive added bonus of being able to use a proper stylus when wanted, in particular for real handwriting recognition, which is impossible on a capacitive device.
just asking, I had and capacitive that was really bad so as resistive and I had the good capacitive and probably the best resistive screen here on tg01
jake333 said:
Finally, you buy it?
Click to expand...
Click to collapse
I have TG-01 with USB connection problem I want to replace its motherboard can any one please help where from I can buy a MB otherwise I would like to cell its parts. please contact at my e-mail. [email protected]com
Regards
Hi,
I've got a question related to the HTC One X. More specifically, all of a sudden my soft keys (back, home, options) started not working. The thing is, I took a look over eBay, and a screen replacement doesn't seem to be that expensive.
Unfortunately, I'm not sure which I would need to buy. I saw there is a LCD screen and a screen digitizer. Which one would I need, or would I need both? I've seen that basically the bottom keys are all connected to a strip and I figure that if I change that that part of the phone, my problem should be solved.
Now, another question would be if I should do it alone, or should I take my phone to a specialist? Taking a look over some YouTube videos, I saw that it's not that complicated to replace the screen of the phone. However, I wouldn't want to start something that would end up messing my phone ever worse than before. I'm not completely retarded when it comes to electronics, but still, better to be on the safe side.
I'm just hoping that some of you guys did this before or has experience with this sort of stuff and can offer some tips.
Thanks a bunch.
You'll need to screen and the digitizer, trying to separate then without destroying either is virtually impossible. The best option if to have it done professionally, but that is also the more expensive option obviously. If you have the right tools and the capability you can do it yourself, but I wouldn't try it unless your confident.
Sent from my Evita
My sister just broke her moto x pure.
The display works, however the digitizer do not works correctly. Cannot post pictures because the wallpaper is containing private information and i cannot change it.
She cannot use the entire screen.
For example on the lockscreen, she cannot use the 8. And the other digits works very badly. So she cannot unlock her phone.
What should I replace (screen, digitizer...) and where should I find the replacement part ?
Thank for your help
You'll need to replace both the digitizer + display as they come together. If you are good at repairing phones, you can get the display from eBay or else send your phone to service center if you don't. I would suggest you to send it to the service center.
You could use a USB OTG cable to connect a mouse and thus regain control of the device in order to clear any sensitive information prior to having someone fix it. I have bought and fixed several Moto X pure edition phones with cracked screens for family members. Most of them did alright, but one phone had the screen replaced, then a cow stepped on it. Although it didn't crack, after a while parts of the screen stopped responding to touch. The screen I replaced it with has not been damaged at all, but parts of it have stopped responding to touch as well. Sometimes I wonder if these phones don't have a particularly weak and easily damaged screen. I sometimes get my replacement screens from GadgetFix. If you fix it yourself make absolutely sure that you get a screen+frame assembly. It's just a few dollars more, and totally worth it. And be careful when you transfer the speaker grill trim to the new screen that you don't press hard enough to crack the screen.
Thanks you, I think I will change the screen and the frame.
https://m.ebay.com/itm/For-Motorola...%3A7550533015e0a9cbd9f98f63fff20079%7Ciid%3A2
Is this what I should buy ?
The screen that you posted does not include the frame. I briefly looked on eBay; you might find one with the frame included for a few dollars less than gadget fix, but for simplicity I just linked this one. On the back side of the display you will notice the screw inserts. That is what you need to look for.
https://gadgetfix.com/motorola-moto...screen-touch-screen-digitizer-frame-7447.html
zstricky said:
The screen that you posted does not include the frame. I briefly looked on eBay; you might find one with the frame included for a few dollars less than gadget fix, but for simplicity I just linked this one. On the back side of the display you will notice the screw inserts. That is what you need to look for.
https://gadgetfix.com/motorola-moto...screen-touch-screen-digitizer-frame-7447.html
Click to expand...
Click to collapse
Thanks !
Could you point me to a tutorial or a video explaining how to change the screen
I believe that Ifixit has a whole teardown tutorial for this phone. If not just search YouTube for (phone model) screen replacement, watch it a time or two, and then pause it while you do each individual step. If the first video you watch doesn't explain things in an understandable manner just watch another one. It's been a while since I searched for one, but I think there are at least a few good ones.