Database Info

bootloader mode and i can't flash with another rom

Hello
i tried to flash my prophet with a portuguese rom with wm6
Now prophet is in bootloader mode and i can't do nothing
what can i do?
i tried
NVID_RUU
and it doesn't update

Go back to a WM5 Rom.

i already done that
but i still can't update for a rom with wm6
i have
ipl 2.15
and
spl 2.20
it's a g4

You must read about SoftSPL or HardSPL - Than you can flash a WM6 Rom.

How to do
1. Instala a Rom original do teu aparelho existe o link ai no site.
2. Faz um update a rom com a do pda mobiz (updaterom) é o nome do ficheiro.
3. Faz o hardspl g3, é o mais habitual mas vê no teu aparelho.
4. Instala a nova rom com a g3 ou g4 (RUU) update utility.
Se tiveres dúvidas diz ok, um abraço.

deltav13 said:
1. Instala a Rom original do teu aparelho existe o link ai no site.
2. Faz um update a rom com a do pda mobiz (updaterom) é o nome do ficheiro.
3. Faz o hardspl g3, é o mais habitual mas vê no teu aparelho.
4. Instala a nova rom com a g3 ou g4 (RUU) update utility.
Se tiveres dúvidas diz ok, um abraço.
Click to expand...
Click to collapse
can you write / translate this in english please ?
I have the same problem with my prophet and need some instructions to flash
thx in advance

How to do
Charge your device for 2 hours first.
Second enter boot loader mode 3 colours by pressing the com button on the left side of the device, wait.
1. Install the original rom
2. Do a update rom use pda MOBIZ STEP 2 update rom file wait...
3. After do a hard spl G3 or G4 depends on your device.
4. Wait until the device enters again into boot loader mode.
5. Install the new Rom and wait for the device to reeboot.
6 If all goes well you can now use WM6.

i already solve this
thanks to all

deltav13 said:
Charge your device for 2 hours first.
Second enter boot loader mode 3 colours by pressing the com button on the left side of the device, wait.
1. Install the original rom
2. Do a update rom use pda MOBIZ STEP 2 update rom file wait...
3. After do a hard spl G3 or G4 depends on your device.
4. Wait until the device enters again into boot loader mode.
5. Install the new Rom and wait for the device to reeboot.
6 If all goes well you can now use WM6.
Click to expand...
Click to collapse
OK, my problem is bigger than this. I can get to the CMONEX page but no further; just hangs there. ALSO, active sync won't connect; tries to but gives up.
The problem? I installed a custom ROM off ppcgeeks.com; it seemed to work well, then it started doing funny things, like not allowing me to access pages; giving me errors messages, etc. I did a soft reset; it hung on the 1st page showing Touch Diamond. Also, won't sync. Did a hard reset (the only way that works for me is to soft reset, quickly press power + vol down while flipping the phone over until the Cmonex page comes up).
Phone hangs there; can't sync it with PC (xppro) anymore (no problems before).
QUESTION: is my phone effed?

Redmi 6 does not turn on, just vibrates

Hello guys,
I did a procedure to install a TWRP on my phone and it will not let me start correctly. (reason: decrypt the cell phone).
When it turns on it just vibrates (does not turn on the screen), it takes about 5 seconds and vibrates again, as if looped.
I already removed the battery, I left it disconnected and nothing, I left it connected in the USB to see if at some point it would solve by itself and nothing too.
I wanted to reinstall the recovery, so I could, but even if I forced to enter the fastboot it will, (even with the screen "off" forced the input and the pc did not recognize)
I'm sad because I "lost" my cell phone, but I know there is some way to revive it, if only I could get into the fastboot I can solve.
Ola pessoal,
Eu fiz um procedimento para instalar um TWRP no meu celular e ele não me permitirá iniciar corretamente. (razão: descriptografar o celular).
Quando acende, apenas vibra (não liga a tela), leva cerca de 5 segundos e vibra novamente, como se estivesse em loop.
Já tirei a bateria, deixei desconectada e nada, deixei ela ligada no USB para ver se em algum momento resolveria por si só e nada também.
Eu queria reinstalar a recuperação, então eu poderia, mas mesmo se eu forçado a entrar no fastboot ele vai, (mesmo com a tela "off" forçou a entrada e o pc não reconheceu)
Estou triste porque eu "perdi" meu celular, mas eu sei que há alguma maneira de reviver isso, se eu pudesse entrar no fastboot eu posso resolver.

How did you remove battery??
---------- Post added at 23:05 ---------- Previous post was at 23:02 ----------
Anyways
You still can just boot into your fastboot. You can't see it but if you manage to blindly boot into it, you'll see it in "fastboot devices". At least i had exactly same issue once and this fixed it. Just flash official ROM via MiFlash if you'll get to fastboot.

opening

someone to help ?

Use this MiFlash application

the cell phone does not go into fastboot mode, I had found a way to make it go into fasboot mode by "making" a DIY cable, but so far I have not gotten such a procedure
http://en.miui.com/thread-310325-1-1.html

close topic pls

I had the same problem, my brick phone totally black, it restarted continuously with vibration but was not recognized by the PC. After numerous tools and time I found motherboard and replaced. By mistake I flashed a wrong boot image and the phone died.

exactly what happened to me, I put the twrp of mi 5 that there was possibility of decrypting miui 10 pro root to run 100%
no miui 9 did not have this "clowning"

XiaoMiFlash

brenoleoni said:
Hello guys,
I did a procedure to install a TWRP on my phone and it will not let me start correctly. (reason: decrypt the cell phone).
When it turns on it just vibrates (does not turn on the screen), it takes about 5 seconds and vibrates again, as if looped.
I already removed the battery, I left it disconnected and nothing, I left it connected in the USB to see if at some point it would solve by itself and nothing too.
I wanted to reinstall the recovery, so I could, but even if I forced to enter the fastboot it will, (even with the screen "off" forced the input and the pc did not recognize)
I'm sad because I "lost" my cell phone, but I know there is some way to revive it, if only I could get into the fastboot I can solve.
Ola pessoal,
Eu fiz um procedimento para instalar um TWRP no meu celular e ele não me permitirá iniciar corretamente. (razão: descriptografar o celular).
Quando acende, apenas vibra (não liga a tela), leva cerca de 5 segundos e vibra novamente, como se estivesse em loop.
Já tirei a bateria, deixei desconectada e nada, deixei ela ligada no USB para ver se em algum momento resolveria por si só e nada também.
Eu queria reinstalar a recuperação, então eu poderia, mas mesmo se eu forçado a entrar no fastboot ele vai, (mesmo com a tela "off" forçou a entrada e o pc não reconheceu)
Estou triste porque eu "perdi" meu celular, mas eu sei que há alguma maneira de reviver isso, se eu pudesse entrar no fastboot eu posso resolver.
Click to expand...
Click to collapse
Please remove the battery and reinstall the battery then go to fastboot mode

folow these steps
the only way you flash your phone is by installing mtk (mediatek) drivers.
if you are using windows 10. Disable Driver Signature Enforcement
download MRT_V3.26
there you have MTK_driver.exe install it. than open folder MTK_CDC_Driver_for_imei right click on Android_Gadget_CDC_driver and install.
download Xiaomi_Flash_20181115.zip
and stable global fastboot rom V10.3.3.0.OCGMIXM
extract it
run mi flash and choose extracted folder, click refresh than flash.
THIS IS 100% TESTED by me.

Vibrating and cannot reboot
I have return my phone to service center because still under warranty after get exactly same problem with yours. They claim motherbord is broken and replace without any charge....

Use
SP_Flashtools_Windo_v5.1812_authID
Rom Fastboot
steps 1
Open SP_Flashtools_Windo_v5.1812_authID
klik download
login mi acount , not auth no problem
vibrate gone
tested by me working

sabanaman said:
Use
SP_Flashtools_Windo_v5.1812_authID
Rom Fastboot
steps 1
Open SP_Flashtools_Windo_v5.1812_authID
klik download
login mi acount , not auth no problem
vibrate gone
tested by me working
Click to expand...
Click to collapse
im sorry, can you give more specific instructions, im a noob in this matters.
blocked my redmi6 ,just vibrates continuialy after Lineage16 Rom flash attemp.
thanks

sabanaman said:
Use
SP_Flashtools_Windo_v5.1812_authID
Rom Fastboot
steps 1
Open SP_Flashtools_Windo_v5.1812_authID
klik download
login mi acount , not auth no problem
vibrate gone
tested by me working
Click to expand...
Click to collapse
can you upload this "SP_Flashtools_Windo_v5.1812_authID" ?
i click download but software say need auth
thanks

Hi. I am exactly problem. Even today I will try this:
youtube.com/watch?v=EekdWcG8Xqo
youtube.com/watch?v=bDGwHWEJqLk
Olá. Estou com exatamente o mesmo problema, ainda hoje tentarei fazer como nesses vídeos ( de preferência espero não ter que formatar kkkk, saco por ter que instalar uma Máquina Virtual com lixo, isto é, windowns, só pra isso kkkk)
Ps. Como você fala português podemos trocar email (desnecessário diser que wpp está temporariamente inacessível para mim kkk) [email protected]

same problem how did you solve this problem can you help me plz

Spflashtool+mct mtk

olá a todos, resolvi o problema com Box, um conhecido de um estado vizinho possue a medusabox e nela ele conseguiu desbrickar o aparelho, porém qualquer nova mudança no bootloader ele bricka novamente

infinix zero 8 bootloop

Hello my friends;
i tried to root my infinix zero 8 with magisk ; i unlocked the phone and i patched the boot.img but the phone now give orange state ''your device is unlocked and not trusted'' and the phone keep rebooting
i tried to flash the boot.img via SP flash tools but my PC now cant detect the phone because of the continuous rebooting.
i tried to use the volume up +power button but this fail too.
i can't get to fastboot to flash the phone..
please i'm deseperate and i really need your help.

Just flash your stock ROM and stock recovery back, you should always do a backup before attempting to flash anything.

XDHx86 said:
Just flash your stock ROM and stock recovery back, you should always do a backup before attempting to flash anything.
Click to expand...
Click to collapse
How can i flash it without PC !!!!

Turn off the device then press volume up while connecting the device to your PC. It should boot to fastboot, if it doesn't then it's most probably that you flashed the wrong boot image or didn't follow whichever guide you were following precisely.
If that's is the case then you can follow this guide to solve your bootloop.
Briefly:
Turn off your phone for at least 10 mins.
Restart your phone into recovery either by volume down - power button combination or volume down usb connection combination.
Select wipe data/factory reset.
If you have custom recovery then try wiping dalvik cache before wiping all data.
Wiping data doesn't remove your custom ROM nor remove your custom recovery. But it will remove root.
Never panic while doing anything to your device. There is always a solution to whichever problem you may face.
Lastly should you find it difficult to do anything of the above mentioned then take your device to a service center.

XDHx86 said:
Turn off the device then press volume up while connecting the device to your PC. It should boot to fastboot, if it doesn't then it's most probably that you flashed the wrong boot image or didn't follow whichever guide you were following precisely.
If that's is the case then you can follow this guide to solve your bootloop.
Briefly:
Turn off your phone for at least 10 mins.
Restart your phone into recovery either by volume down - power button combination or volume down usb connection combination.
Select wipe data/factory reset.
If you have custom recovery then try wiping dalvik cache before wiping all data.
Wiping data doesn't remove your custom ROM nor remove your custom recovery. But it will remove root.
Never panic while doing anything to your device. There is always a solution to whichever problem you may face.
Lastly should you find it difficult to do anything of the above mentioned then take your device to a service center.
Click to expand...
Click to collapse
Thank you for your answer, but the problem that i can't turn off the phone even when i use button combination; it's always rebooting until it get discharged
Do you have any other way to get to the recovery page or to stop this rebooting !

You can follow this thread.
One of the posts there says:
Hold Vol down and power for soft reboot. As soon as the screen goes off to reboot quickly switch to recovery combo (bixby + up + power) it should boot to recovery
Click to expand...
Click to collapse
Your recovery combination should be volume up + power.
Another says:
I managed to fix my phone. After leaving it for 24 hours the battery was fully drained. After charging again i could boot to twrp and restore my nandroid backup.
Click to expand...
Click to collapse
Here you can also drain the phone and leave it, then press volume up while connecting the usb.
Either of them should work with your situation, as they both have the same circumstances as yours.
The main point of what I just said, is to either get your phone to soft reboot or completely drain the phone from charge and try booting to recovery again.

XDHx86 said:
You can follow this thread.
One of the posts there says:
Your recovery combination should be volume up + power.
Another says:
Here you can also drain the phone and leave it, then press volume up while connecting the usb.
Either of them should work with your situation, as they both have the same circumstances as yours.
The main point of what I just said, is to either get your phone to soft reboot or completely drain the phone from charge and try booting to recovery again.
Click to expand...
Click to collapse
OK thanks ; i will tri this and send to you a feedback

MrMonti said:
OK thanks ; i will tri this and send to you a feedback
Click to expand...
Click to collapse
Hello guys,
I tried every thing you said but nothing works!! the phone still always rebooting , even after the battery is completly drained when i connect the charger it start rebooting again , and the PC still not detect the phone!
Do you have any other solutions pleasaaaase

MrMonti said:
Hello guys,
I tried every thing you said but nothing works!! the phone still always rebooting , even after the battery is completly drained when i connect the charger it start rebooting again , and the PC still not detect the phone!
Do you have any other solutions pleasaaaase
Click to expand...
Click to collapse
Unfortunately friend you have no more options left. You have to send it to an authorized service center.
They will fix this issue for you, leave this matter to the professionals and don't further complicate things by messing with your device unnecessarily.

MrMonti said:
Hello my friends;
i tried to root my infinix zero 8 with magisk ; i unlocked the phone and i patched the boot.img but the phone now give orange state ''your device is unlocked and not trusted'' and the phone keep rebooting
i tried to flash the boot.img via SP flash tools but my PC now cant detect the phone because of the continuous rebooting.
i tried to use the volume up +power button but this fail too.
i can't get to fastboot to flash the phone..
please i'm deseperate and i really need your help.
Click to expand...
Click to collapse
i had that exact same problem. what you need to do is open up the back and disconnect the battery. then i hope you have all its usb drivers installed, if not install them. then you need to use this https://github.com/MTK-bypass/bypass_utility you can also look at some guides on youtube on how to set everything up as the github guide aint all that specific. then run that main.py and while holding, if i remember correctly, volume down connect the phone without battery being connected. after some tries it should say sth along the lines of protection disabled or sth and then without disconnecting flash your rom using sp flash tool. that worked for me. and also dont be put off if that bypass tool doesnt work on the first try. it took me like atleast 30 tries to get it working.
hope it helps

kusti420 said:
i had that exact same problem. what you need to do is open up the back and disconnect the battery. then i hope you have all its usb drivers installed, if not install them. then you need to use this https://github.com/MTK-bypass/bypass_utility you can also look at some guides on youtube on how to set everything up as the github guide aint all that specific. then run that main.py and while holding, if i remember correctly, volume down connect the phone without battery being connected. after some tries it should say sth along the lines of protection disabled or sth and then without disconnecting flash your rom using sp flash tool. that worked for me. and also dont be put off if that bypass tool doesnt work on the first try. it took me like atleast 30 tries to get it working.
hope it helps
Click to expand...
Click to collapse
but in my case i had literally 0 signs of life, so i was even worse off than you and i got it unbricked like that today

MrMonti said:
How can i flash it without PC !!!!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hello i got infinix zero 8 but i cant unlock it my pc cant read it after booting to bootloader and my pc said: Waiting for device how did you unlock your bootloader?

Jericho.sambile said:
Hello i got infinix zero 8 but i cant unlock it my pc cant read it after booting to bootloader and my pc said: Waiting for device how did you unlock your bootloader?
Click to expand...
Click to collapse
Hi , i tried everything but nothing works.
So i took my infinix to the after sale service and they repaired my phone.
It's the safest way.
Good luck

kusti420 said:
i had that exact same problem. what you need to do is open up the back and disconnect the battery. [...]
Click to expand...
Click to collapse
I F*** my system trying to do TWRP with the wrong ROM , unfortunately I ended up killing "Boot.img" and "Recovery.img". I'm a few weeks looking for help from any UNBRICK, but that doesn't happen.
Finally, I understand that there really is no way to proceed without opening the back and removing the battery plug.
# I'm thinking about the best way to proceed with this, all I did was this:
All drivers mtk
SP drivers
bypass
brom.bat
libUSB (MediaTek_USB_Port)
OPPO
python
it's all unlocked, but i didn't root. I downloaded firmware: X687-H851D-Q-OP-210705V513
"SWD AfterSales" seems to work, however SP Flash Tool is universal...

KEEP CALM!
Spoiler: End happy :)

[PT-BR]: language in portuguese... [I ask someone to translate to English, thank you]
UnBrick do iz8
Leia tudo antes de sair fazendo!
Você vai precisar instalar algumas coisa no seu Pc, é simples e rapidinho;
- All drivers mtk
- SP drivers
- bypass (brom.bat)
- libUSB (MediaTek_USB_Port)
- drivers OPPO (se não reconhecer, instalar)
- python 3.7 ou superior se conseguir
Se lembre que é fazer flash igual com qualquer outro Android que usa SP Tools, não tem segredo, nem mistério, é bem simples de fazer flash!
Segue esse vídeo do tutorial referente a instalação dos drivers,
tá extremamente bem explicado, mesmo assim há um fórum xda logo abaixo do video, traduza a página e leia - Obviamente você não vai seguir com processo DA, instalando ROM de outro aparelho, sim!?
Continuando...
Agora, chegou a parte sobre o problema "X". Assim como alguns outros modelos atuais Android, por segurança tem seu pré inicialização bloqueada e por isso ele ficará no LOOP... infinitamente reinicando, tentando entrar em modo Fastboot, recovery, twrp ou os 5 segundos de bootloader, porém já não existe mais essa inicialização do sistema.
Para que você tenha acesso é necessário desplugar o conector da bateria direto da placa, assim quando pedir acesso ao Z8 você poderá dar aceite no processo "Brom.bat". Então o próximo passo é abrir a traseira do aparelho (que é ridiculamente simples) e em seguida a primeira camada de trás — não tudo só até aonde se encontra o plug da bateria.
Como exemplo, veja esse cara desmontando:
Caso não tenha aparelho pra descolar a tampa, esquente sua própria mão as quinhas e laterais do aparelho pra amolecer a cola, faça o mesmo em torno das câmeras, sempre com muito cuidado pra não se queimar :')
Se não tiver os matérias, corte uma lasca pequena de garrafa pet e começamos a remover a tampa traseira indo de baixo para cima e tomando cuidado com GAVETA SLOT SIM e com LEITOR DE DIGITAIS,
TOME EXTREMO CUIDADO NESSA ÁREA, SE DANIFICA O CABO JÁ ERA!
és um dos motivos de porque tem gente que tá vendendo iZ8 sem leitor de digitais funcionando.
Depois de remover todo o necessário com cuidado; faça o processo de FLASH da forma normal com o telefone desligado. Na inicialização do Flash, ASSIM QUE PLUGAR no USB aperte sua tecla de volume "+" e pronto, Será reconhecido no => brom.bat <=
DESMARQUE O PRELOADER, pois pode ser apagado o IMEI, informações importantes OU dados de autenticação
SEMPRE "Download Only", SEMPRE✓
Finalizado, em seguida o SP Tools já pode está iniciando para vossa alegria
Observação importante:
ROM usada foi referente ao que o telefone se encontrava no momento: X687-H851D-Q-OP-210705V513
se não consegui instalar o LibUSB quando estiver no LOOPBoot, conseguirá instalar sem tá plugado na bateria!
Caso precise de algum aquivo de autenticação, ali embaixo do Scatter, procure! O utilizado foi "auth_sv5.auth", vou tentar deixar um link no Gdrive... ✓
coloquei algodões nas cameras se desprotegidas ou sele com fita adesiva até o momento da montagem do aparelho pra não ficar resto de poeira
~ se chegou até aqui, fique ciente de que você não comprou essas Informações, então de maneira alguma cobre para ajudar o próximo!
!
faça tudo com calma, paciência e em um lugar visivelmente limpo e sem risco de poeira, boa sorte!

Arquivos - Google Drive
drive.google.com
*******
Se algo estranho acontecer ou houver algum empecilhos tente isso:
Coloque o arquivo "Checksum.ini" dentro da pasta que esta a ROM (descompactada) e use a versão v5.1924 do SP Flash Tool.
Escolha o arquivo "auth_sv5.auth" em autenticação de arquivo, dessa vez marque só o boot e recovery e flash. Então veja a mágica acontecer!
********

Question Samsung TAB A Wont go into recovery mode or download OR even get into the actual tablet

As title says, i tried to flash an official stock firmware to this device as it was running a demo OS on an old android version and wanted to remove the demo from the bootloader. When flashing with ODIN odin crashed and when trying to turn the device back on i just get a black screen.
When i hold power and vol down it will show the boot screen then go to a blue screen for about 1second that quickly says Installing update. with the android logo, then it just goes black as if its powered off. I try to enter recovery, does the same, try to go to download mode does the same, cant enter either it just boots off and goes to a black screen after seeing that blue screen.

Gazz man !!!

Rijaj brian said:
Gazz man !!!
Click to expand...
Click to collapse
huh?

MichaelK18 said:
As title says, i tried to flash an official stock firmware to this device as it was running a demo OS on an old android version and wanted to remove the demo from the bootloader. When flashing with ODIN odin crashed and when trying to turn the device back on i just get a black screen.
When i hold power and vol down it will show the boot screen then go to a blue screen for about 1second that quickly says Installing update. with the android logo, then it just goes black as if its powered off. I try to enter recovery, does the same, try to go to download mode does the same, cant enter either it just boots off and goes to a black screen after seeing that blue screen.
Click to expand...
Click to collapse
Live demo units are not meant to function as normal devices. Most if not all demo units in the open market are stolen/thrown away and missing the cellular modem (meaning no baseband or imei) or have no antennas.
They are locked down (by samsung in your case) for very obvious reasons and as such you won't be getting much help from xda members.
Your only option is to open up that device and replace the mobo with another one (you have all the hardware except an appropriate motherboard). Good luck

MichaelK18 said:
huh?
Click to expand...
Click to collapse
Envolvendo algumas situações também! Mas yeah! Eu(me)

Slim K said:
Live demo units are not meant to function as normal devices. Most if not all demo units in the open market are stolen/thrown away and missing the cellular modem (meaning no baseband or imei) or have no antennas.
They are locked down (by samsung in your case) for very obvious reasons and as such you won't be getting much help from xda members.
Your only option is to open up that device and replace the mobo with another one (you have all the hardware except an appropriate motherboard). Good luck
Click to expand...
Click to collapse
Yeah that makes sense i guess. But yeah i work in retail and they were going to be thrown away, old demo units that got lost within the stockfile samsung, lenovos, etc., half of them got thrown away some were smashed etc. and i took the other hoping to just use it for my broithers kid its no big deal since it cost nothing was just wondering if there was a workaround to it. since this never happened to me before

MichaelK18 said:
Yeah that makes sense i guess. But yeah i work in retail and they were going to be thrown away, old demo units that got lost within the stockfile samsung, lenovos, etc., half of them got thrown away some were smashed etc. and i took the other hoping to just use it for my broithers kid its no big deal since it cost nothing was just wondering if there was a workaround to it. since this never happened to me before
Click to expand...
Click to collapse
Serious .isso e culpa tua brash agiste de cabeça quente mantem te calmo porque ja esta a meio gazz com as pessoas vou tentar me manter mais transparente para poder chegar ficar ai e trabalharmos melhor isso nunca irá morrer agora falas melhor estavas muito em cima mas agora eu nao posso ver ele com aquela moça ela estaria a ganhar...

Rijaj brian said:
Serious .isso e culpa tua brash agiste de cabeça quente mantem te calmo porque ja esta a meio gazz com as pessoas vou tentar me manter mais transparente para poder chegar ficar ai e trabalharmos melhor isso nunca irá morrer agora falas melhor estavas muito em cima mas agora eu nao posso ver ele com aquela moça ela estaria a ganhar...
Click to expand...
Click to collapse
dude i dont understand what you are saying xD

Question Airtriggers

Airtrigges doesn't work or when it works and starts playing it stops! I did a test and they were working I opened the game and it worked normally then when I put the cooler it stopped working and did not work anymore, I already restarted, cleared cache, factory reset and the problem persists, could someone give me a tip on how to fix it this problem?

Acabei de fazer outro teste desligo o celular e ligo os Airtriggers voltam a funcionar depois ligo o jogo eles param de funcionar!