unlock Benq E72 same Kyocera E4000 - Non-Touchscreen Windows Mobile Other

this procedure has been tested on kyocera E4000
Use At Your Own Risk
* open P21DTDownloadTool_Crack and upload the files
MSIPL---------Plmdoc.nb0
EBoot---------ebootmdoc.nb0
BDTL0---------reserved.dio
OS------------65.dio
check Enter OS after dolownload
this rom is windows mobile 6.5
only flash and enjoy unlocked device
e4000 is the same benq e72
Use At Your Own Risk

where are the files?

Related

shipped ROM of Vodafone VPA Compact s

shipped ROM of Vodafone VPA Compact s
I have made a ROM Backup/Dump of my new "Vodafone VPA Compact s" by using aWizard. --Original ROM of Vodafone.
For some one it concerns and interest.
I have made it in two versions: .nba ROM for aWizard or myOs flashing; .nbf version for RUU flashing. You can choose different methods freely.
1. .nba (.nb) ROM by using flashing tool "aWizard" or "myOS" for G4:
It includes: vodafone-HTCLogo, vodafone-OS, vodafone-Radio and vodafone-ExtROM. all in filetype ".nba".
You can flash this ROM by using Prophet-tools such as MyOS or awizard according to right steps.
Download Address:
Code:
http://fileho.com/download/930d48588908/vodafone-VPA-Compact-s-Shipped-ROM.rar.html
Mirrors:
1a).
Code:
http://www.megaupload.com/?d=HMLHJTT3
1b).
Code:
http://rapidshare.com/files/22598551/vodafone_VPA_Compact_s_Shipped_ROM.rar.html
2. .nbf ROM by using flashing tool "ROMUpdateUtility NovendorID" for G4: click ROMUpdateUtility_G4.exe and then step by step.
2a). RUU ROM for Vodafone VPA Compact s (without Ext_Rom, IPL/SPL), you can copy the your own Ext_rom (or download the original EXT_ROM version of Vodafone from my post above--Download & Unzip/Unrar it you will see) to your PPC\extended_Rom by using software "Total_Commander" and run manuelly.
DDL:
Code:
http://rapidshare.com/files/22623217/RUU_G4_for_Vodafone_VPA_Compact_s.exe.html
2b). Another original RUU ROM for Vodafone VPA Compact s (with Ext_Rom, OS, Radio/GSM, Splash,HTC Logo. Without IPL/SPL). You can config your own Ext_ROM by edit "config.txt" in file folder extended_Rom (Unlock & Unhide the Ext_rom first).
DDL:
Code:
http://fileho.com/download/2bfe31173626/RUU-G4-for-Vodafone-VPA-Compact-s.rar.html
For Backup & Emergency only, pls use it at your own risk!
YEAH MAN Thank YOU VERY MUCH
it was deleted though on the server already so could you upload it again on rapidshare or something?... thanks
Download URL updated!!!
This Rom:
http://rapidshare.com/files/22623217/RUU_G4_for_Vodafone_VPA_Compact_s.exe.html
crashes my phone i have to reupgrade to 2.20 in bootloader mode.
€: http://www.megaupload.com/?d=HMLHJTT3 works but i cant flash the splash and logo. How shall i do it? The logo file is empty (0 byte, has someone a backup?)
This is Windows Mobile 5, isn't it?
i instaled this rom and i bricked my ppc... can you try first what are you uploading??? and yes it would be nice if we have vodafone original software just in case we need to take it back to the service, because of waranty.. thanks, but can you provide working version???
hi can i flash this Rom 4 my Prophet
i have Vodafone in silver
Vodafone vpa compact 1 ger
hello my dear is there any english rom for Vodafone vpa compact 1 ger
rom vesion 1.12.01 GER
Radio version 1.12.00
protokoll version 1337.42
ExtRom-version 1.12.161 GER
Windows mobile 2003 se
CPU intel (R) PX272
416 MHZ
thank you ver much

Install new rom via SD card

Dear all,
I have an old windows mobile 5 Qtek 9000 and now I decide to upgrade with one of the latest WM 6.1 rom. The point is that I have no usb cable with me. Which is the easiest way to flash a new rom on my Qtek 9000? Can you link me a simple guide?
Thanks.
Luke
flasher...
As far as I am aware flashing from the SD isn't an option. The cable from any device with the same shape interface e.g. PSP, digital camera, etc. should work.
It is an easy process as long as you stick to the basics like glue:
- identify the type of handheld you have (G3/G4, 64MB/128MB) and select compatible ROMs + have the OEM ROM available in case a reflash is needed.
- remove the SD
- sync with PC or backup personal information.
- clear the handheld memory (hold down the two menu keys while pressing reset, then 0)
- enter bootloader mode (backlight+power+reset) then connect. PDA screen should change from serial to USB.
- disable PC firewall
- be patient.

Linux on BenQ E72

Hi!
Is there any possibility to run Linux on BenQ E72? I've tried HaRET, but it hangs-up my phone when 'Booting Linux' ends. I think an img of Linux was not compatible with BenQ E72. It was adjusted to HTC Typhoon and Tornado. There's a link to the img: http://vivien.chappelier.free.fr/typhoon/download.html
I've tried version 0.4.7 and 0.5.2 of HaRET.
Sorry for my bad english

[Custom ROM]RUU_Gold_HTC_Europe_1.24.401.01_Radio_5.65.09.25a_ 22.42.50.21U by ansar

Dear forum members,
YES!!!
I successfully created my 1st custom ROM for the Gold 7 Pro Windows Phone with the new HSPL by cotulla
RUU_Gold_HTC_Europe_1.24.401.01_Radio_5.65.09.25a_22.42.50.21U_NoDo_custom_by_ansar
I used as a base this ROM:
RUU_Gold_HTC_Europe_1.24.401.01_Radio_5.65.09.25a_22.42.50.21U_NoDo_by_ansar
The custom build has the ability to be unlocked and to upgrade to MangoB2 thru zune
In my next build i will try to include mango and dfrouter for those not sync to zune
Thanks to my giant friends ervious, mamaic, bepe and cotulla
I hope to upload it today [edit: done] and some day to create an hspl too!!
///////////////////////////////////////////////
[CRI] Custom ROM Index for Windows Phone Mozart
///////////////////////////////////////////////
Download Link RUU_Gold_HTC_Europe_1.24.401.01_Radio_5.65.09.25a_22.42.50.21U_NoDo_custom_by_ansar
///////////////////////////////////////////////
This ROM supports:
- Chevron unlock and
- MangoB2 update to 7403 and 7712 and
- does not include SPL in order HSPL to be retained
All other elements are as in stock relevant ROM of version HTC_Europe_1.24.401.01_Radio_5.65.09.25a_22.42.50.21U_NoDo
///////////////////////////////////////////////
The provided ROM can be flashed to all RSPL / HSPL supported operators:
- hTC_Europe / O2_DE / TMO_DE / Vodafone_CH_DE
///////////////////////////////////////////////
There are not known, yet, unsupported operators by RSPL/HSPL
///////////////////////////////////////////////
ROM installation instructions
To install the ROM follow these steps:
- install RSPL and select your ROM version X.YY
- install HSPL
- unzip the downloaded zip file and run ROMUpdateUtility.exe
///////////////////////////////////////////////
MangoB2 update instructions
To update in MangoB2 you must in your PC/Laptop:
- download my NoDo_Public_by_ansar.zip and Mangob2_Public_Trial_by_ansar.zip
- uninstall WPSupportTool-x86.msi or WPSupportTool-x64.msi and
- install Setup-UpdateWP-x86.exe or Setup-UpdateWP-x64.exe
- install StartZuneLocal.exe
///////////////////////////////////////////////
MangoB2 Chevron unlock instructions
A. To retain Chevron unlock on MangoB2 in 7403 perform the following in windows phone:
[Optional steps]
- Uninstall Connection Setup after ROM flashing
- Sign in to Windows Live and
1. Run Marketplace, select HTC Apps and select Connection Setup
2. After relevant prompt Power off and then Power on your device
- Repeat above 1 and 2 to install Connection Setup
[End of optional steps]
- Deploy my Unlock_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Deploy TouchXplorer.xap
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Remember: do not run Connection Setup now
- Update to MangoB2 7403
- Now run Connection Setup
- Check that you are unlocked by running TouchXplorer
B. To retain Chevron unlock on MangoB2 7712 perform the following in windows phone:
[Optional steps]
- Uninstall Connection Setup
- Run Marketplace, select HTC Apps
- You maybe wait some minutes for Connection Setup to appear
- When Connection Setup appears install it
[End of optional steps]
- Deploy my Update_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Run Connection Setup
- Deploy my Unlock_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Remember: not run Connection Setup now
- Update to MangoB2 7712
- Wait for update to finish
- Now disconnect from usb cable and enter SIM pin
- Now run Connection Setup
- Check that you are unlocked by running TouchXplorer
///////////////////////////////////////////////
Till next version enjoy!!
Regards, ansar
Error 244: Invalid Model ID
Thank you, but when i try Installing stucked in 1%.
Message appears: Error [244]: INVALID MODEL ID
did you read? did you install RSPL/HSPL first?
you cant load custom ROM's without load RSPL/HSPL
http://forum.xda-developers.com/showthread.php?t=1195647
Hi! thx for your work & sharing!
Can you tell me, why should i first install rspl and than 2nd hspl? i don´t understand the benefit!
regards dr-death
hmm ... I've read the instructions and I've tried many rom including Mango 7713 Gold from DFT Team.
if not use rspl/hspl, installation will stucked in 0%
Dr-Death said:
Hi! thx for your work & sharing!
Can you tell me, why should i first install rspl and than 2nd hspl? i don´t understand the benefit!
regards dr-death
Click to expand...
Click to collapse
RSPL allows to install HSPL to device (if you not install HSPL, after reboot device RSPL is deleted from memory)
original SPL dont allow loading custom ROM's... this is benefit... in theory, you can load any ROM (WM, Android, WP7) if available... for now only WP7 custom ROM's is available
charboss said:
Thank you, but when i try Installing stucked in 1%.
Message appears: Error [244]: INVALID MODEL ID
Click to expand...
Click to collapse
i have installed HSPL, but i can´t flash this rom. can you help me?? the dft-rom flash with success...
PC92100
HSPL1.22.2250.0
CotullaHSPL 0x06
Touch A1(v10,20)
regards dr-death
Dr-Death said:
i have installed HSPL, but i can´t flash this rom. can you help me?? the dft-rom flash with success...
PC92100
HSPL1.22.2250.0
CotullaHSPL 0x06
Touch A1(v10,20)
regards dr-death
Click to expand...
Click to collapse
Yes, I also can't install this rom, always stops at 1% and restart my phone. Ansar could probably fix it. I am assuming the problem is on the radio 5.65.09.25a_22.42.50.21U, spl version does not match because it always appears message Error [244]: INVALID MODEL ID, but I also could not confirm it, I hope Ansar know more about this issue.
I've been experimenting with installing ROM RUU_Gold_HTC_Europe_1.22.401.01_Radio_5.63.09.13_3a_22.36.50.15U_by_ansar, then I try to install just file spl_signed.nbh from ROM RUU_Gold_HTC_Europe_1.24.401.01_Radio_5.64.09.20_22.42.50.15_Signed_GOLD_RELEASE, and the results radio version is 5.64. 09.13_3a_22.36.50.15U. It works perfectly in my device.
I am still waiting for the new radio version.
Note: based on my experiment: if your device installed hspl with just installing file 'spl_signed.nbh' from stock/branded rom, your spl will be back to stock spl.
(sorry for my bad english)
regards, charboss
charboss said:
Yes, I also can't install this rom, always stops at 1% and restart my phone. Ansar could probably fix it. I am assuming the problem is on the radio 5.65.09.25a_22.42.50.21U, spl version does not match because it always appears message Error [244]: INVALID MODEL ID, but I also could not confirm it, I hope Ansar know more about this issue.
I've been experimenting with installing ROM RUU_Gold_HTC_Europe_1.22.401.01_Radio_5.63.09.13_3a_22.36.50.15U_by_ansar, then I try to install just file spl_signed.nbh from ROM RUU_Gold_HTC_Europe_1.24.401.01_Radio_5.64.09.20_22.42.50.15_Signed_GOLD_RELEASE, and the results radio version is 5.64. 09.13_3a_22.36.50.15U. It works perfectly in my device.
I am still waiting for the new radio version.
Note: based on my experiment: if your device installed hspl with just installing file 'spl_signed.nbh' from stock/branded rom, your spl will be back to stock spl.
(sorry for my bad english)
regards, charboss
Click to expand...
Click to collapse
Hi! Is your bootloader now 1.24.x or 1.22.x?? Can i update the bootloader only??
my radio is Radio_5.64.09.20_2 2.42.50.15, but the bootloader is 1.22.x. thx for your answers!!
regards dr-death
Dr-Death said:
Hi! Is your bootloader now 1.24.x or 1.22.x?? Can i update the bootloader only??
my radio is Radio_5.64.09.20_2 2.42.50.15, but the bootloader is 1.22.x. thx for your answers!!
regards dr-death
Click to expand...
Click to collapse
My Bootloader now is 1.24.2250.0, OS Version: 7713.WM7_Main(DFT)...
Yes, you can do that. I've tried it.
But remember if your bootloader is HSPL after installation your bootloader will be back to SPL and your phone will be resetting your data and application.
I did it, when I start from beginning of installation (from OS 7004) or after install Custom ROM from DFT.
Thank you for your work.
How is it looking about DFrouter?
Would appreciate such a ROM
Hi.
1st. Sorry for my english.
2nd. Maby its not exactly place for my question but...
I have problem with update to this version (i need Polish lang). When i connecting by ZONE soft - it all OK but... DFT_HSPL_WP7FG2 dont see my HTC and wingows mobile on win7 too. What can i do?
thx.
HTC 7 pro T7576
OS: 7.0.7392.0
Radio: 5.65.09.25a_22.45.50.21u
You tried do everything the same in this thread ? http://forum.xda-developers.com/showpost.php?p=16189677&postcount=2
Read #2 post, Zune must be off and device must be unplugged from PC. You must run DFT_RSPL_WP7FG1_LAUNCH and klik next. At this moment you can plug your device to PC by USB but, phone must be in bootloader mode (off device and on with hold volume down button - you see three colored screen). Now you can instal RSPL and next HSPL.
Thx Budniu. (dziękuję)

[Q] Windows 8 - Toolkit?

Hello all together and happy new year!
First of all -> Sorry for my english skills!
I currently work on some tools and images, specially for Windows 8.
1. Is there any requirement for Windows 8 Custom Toolkits?
2. Is somebody interested or has ideas in managing, deploying and cooking Images of Windows 8?
I am working with and using Windows 8 since its first beta (Developer Preview) and it is (yes, but in any user opinion) a new Vistaster. Technically it has a huge set of advances, like
1. Boot on any supported computer hardware (in case only neccessary drivers should be installed in OS) which implies Point 2:
2. Ability to boot from any bootable media (Tested on DVD (damn small Windows 8 / PE), BD, USB-Stick, SD-Card aso...) your Bios is supporting.
3. New, touch-friendly (and often buggy) boot menu (supporting USB 3.0, using it since grub4dos couldnt...)
I'm playing around Windows 8 PE, now downloading ADK for further development. My first milestone is to create a recovery environment which is able to make incremental OS backups and restore (using Microsoft WIM), flash an custom image to OS partition, all in a user-friendly, open-source UI application made with .NET-Framework 4.
Please tell me that nobody tried this before! And what do you think about this?

Categories

Resources