HTC Magic - Root, SPL and Radio, Hero ROM Clarification - myTouch 3G, Magic Android Development

Newbie Here
My HTC Magic:
Carrier: Cosmo Bulgaria Mobile / Globul
Country: Bulgaria
Configuration:
SAPPHIRE PVT 32A SHIP S-ON H
HDBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32
Updated: I`ve rooted my Magic following this installation guide: http://theunlockr.com/2009/07/08/how-to-root-your-htc-magic/
daldroid-htcmagic1-signed
daldroid-recovery
I`m not sure if daldroid and nandroid ROMs matters here?
Strange, some of the programs requiring root acces (Like Power Manager) are not working and again asking for root... but others are working properly..
I`ve read all the articles related to the SPL, HTC Hero ROMs etc., but didn`t find specific answer to my in mind question and confirmation if i understand it correctly, so here i am with the specific questions:
According the the above specification of my phone i assume i need first to install this SPL:
Engineering SPL HBOOT-1.33.2005 Signed update.zip (This is the same one as the Haykuro SPL). from this tread http://forum.xda-developers.com/showthread.php?t=529019
- HBOOT-1.33.0009 (SAPP10000) : Sapphire PVT 32A SHIP S-ON H : CPLD-12 (Greek)
I`m planning to follow this WiKi guide for the SPL:
1.
Flashing new SPL's and Radios
Push the update.zip file to your SD card or mount the SD card and drag and drop it in your OS:
adb push update.zip /sdcard/update.zip
When you are done pushing it. Start the phone in the recovery mode by turning it off and then start it by hold home+end.
Then in recovery mode scroll down and press apply:update.zip, wait until it has finished and then reboot.
Once i successfully flash the SPL i guess i just need to choose the Hero ROM and then flash it?
For example this guide: http://theunlockr.com/2009/07/21/how-to-load-a-custom-rom-on-your-htc-magic-including-hero-roms/
I really need you guys to confirm what i`m planning so far or to correct me if i misunderstand something.
I`m really trying hard to read all the articles and to understand what i`m facing and your help will be appreciated!
Thanks in advance

Post your question in the Sapphire general forum. This is the Sapphire android development forum, you aren't trying to develop anything...

Can I throw something out there that's not entirely unrelated to the above post, in the hope the board mods are watching?
I can see both arguments from those in this thread - the OP is asking a question about how to make use of the development that goes on here, whereas Cheesebaron is taking the purist approach. Two to three weeks ago, I was at the same knowledge level as the OP and posted a similarly dumb query on here. A few weeks on I'm merrily contributing by fixing Exchange compatibility on Jerpela's builds. So I would say to those hardcore purists on here, don't scare off the noobs - you don't know what they'll eventually evolve into.
Now speaking personally, looking back to a few weeks ago, I would never even have dreamed of looking on the general board for answers on how to implement the things found on the development board. "General", to my mind, seems to suggest things more like "where can I get a nice case for my Magic?".
The answer? The Dream guys have a Q&A board which is clearly designed for the sort of post that started this thread. We don't. We need one.

Nobody willing to confirm or correct me?
Well looks like i have to brick my phone first and then ask any kind of questions... and maybe... someone like "Cheesebaron" will kick me again `cause it`s not in the right forum...
Thanks anyway...

Here you go.
Get your SPL Here
And this is the guide I like to fallow. It's for the Rogers magic but it should work for you just fine, just make sure you use a ROM for a 32A board.
Clinton

ClintonH said:
Here you go.
Get your SPL Here
And this is the guide I like to fallow. It's for the Rogers magic but it should work for you just fine, just make sure you use a ROM for a 32A board.
Clinton
Click to expand...
Click to collapse
Thanks man...
I gues i need this SPL: Engineering SPL HBOOT-1.33.2005 Signed update.zip
`Couse i`ve already saw a guy with the same Board and Radio bricking his phone using this one: Modded HBOOT-1.33.2004 by Crios Signed update.zip

Here's what I did.
I followed this recipe found at http://www.howardforums.com/showthread.php?t=1545226
Then used this ROM instead of the suggested fatal1ty one. http://www.4shared.com/file/118776501/c759bba3/myhero-008.html
I have the exact same board as you.
I have no problems whatsoever, and the ROM seems the fastest and most stable I have tried. No overclocking needed.

aribalch said:
I followed this recipe found at http://www.howardforums.com/showthread.php?t=1545226
Then used this ROM instead of the suggested fatal1ty one. http://www.4shared.com/file/118776501/c759bba3/myhero-008.html
I have the exact same board as you.
I have no problems whatsoever, and the ROM seems the fastest and most stable I have tried. No overclocking needed.
Click to expand...
Click to collapse
Can you tell me which ROM is that and a link to the thread of discussion? I`ll be happy to read all about it.
Thanks

32B Radio
Im finding that with my 32B magic that I keep losing the network signal and it doesnt automatically re-connect to the network when the signal comes available again, I have to select airplane mode and then turn airplane mode off.
I think at some point I may have flashed my radio but in all honesty Ive lost all track of what ive flashed
currently im using
62.50s.20.17h_2.22.19.26I
and NK02s latest ION rom
Is anyone else having this prob or know where I can get a download of the 32B radio?

Related

Non Newb w/ a newbie question =)

I fell off the face of the planet when it comes to updating my phone. I followed directions a long time ago to convert my mytouch 32a to a 32b device and also downgraded the spl (i believe thats what it was)
My question is:
Im looking to put another rom on here, this isnt as easy as it was w/ the g1 i had used for a while.
Im wondering how to properly flash this rom to my phone. Do i just do a normal wipe and flash?
http://forum.xda-developers.com/showthread.php?t=575501
im very familiar w/ adb and commands, just let me know the proper process needed and that should do it really. Just dont want to brick my phone due to something i SHOULDNT have did (something with the spl not being right, if i remember im on the 2005 that was needed due to the unrootable spl that was shipped w/ the phone, goldcard method).
***EDIT***
forgot to mention clearly that i am running cyanogens last rom right before googles butt in.
If this steps on anyones toes, sorry.
If your just trying to update the rom, do a wipe then update the rom, not gonna brick it unless your doing spl... be sure to nandroid before...
what spl do you have right now? haykuros 1.33.2005? what rom do you want to flash?
Ohh and it is much easier than when I first did it with the G1.. so relax, take your time, look at what rom you need, research the recovery rom as you didnt mention it.
to tell what spl you just boot the phone with power and back then read from the top
scrufy said:
to tell what spl you just boot the phone with power and back then read from the top
Click to expand...
Click to collapse
im using the 2005 haykuro i believe, the one that you used through tutorials to get rid of the unrootable spl. I am using the RAv1.2.1g recovery.
the whole "wiping and flashing" isnt a problem with a nadroid backup. Only thing confusing me is this 32a and 32b. Since i "converted" im confused as to how dedicated these for functionality.
well when you boot into fastboot what pvt board does it say? i would ask around because i didnt know you could change pvt boards...this could either be a BIG THING or it couldnt matter...
oshizzle1991 said:
well when you boot into fastboot what pvt board does it say? i would ask around because i didnt know you could change pvt boards...this could either be a BIG THING or it couldnt matter...
Click to expand...
Click to collapse
exactly why i created the thread
im currently running the sapphire pvt 32b
hboot-1.33.2005
radio is 2.22.19.261

Plenty questions, 32A

Hello.
I've been here for around a week now, reading tons and tons of threads and guides, yet it leaves me with a bunch of questions i am having trouble finding answers to.
First of all, this is the information i've managed to get from my Magic
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0014 (SAPP10000)
CPLD-12
RADIO-3.22.23.18
Sep 2 2009, 17:42:56​
It's bought in Denmark, however i bought it used, so i don't know what's happend to it in the past, yet as of what i've read and tried, i believe it's still as stock.
A bunch of questions
General
1. What is SPL?
2. What are the different types and differences of SPLs?
3. What is Radio?
4. What is a "Goldcard"?
5. In what part of the proces from stock ROM to a Hero ROM is the chance of bricking the phone?
Concering my phone
1. How to you get started upgrading a stock Magic with the standard ROM to a Hero ROM? (Do you flash SPL first, recovery first, or something third?)
2. I believe but not sure, that my current SPL is a "perfect" one, do i need one of these so-called "goldcards" to get a Hero ROM?
3. How great is the chance of bricking the phone with my specs and versions, and is there any way to minimize this chance?
​
I hope that someone will be able to help answering my possibly stupid questions, so i'll eventually be able to get a Hero ROM working on the dear magic without bricking it.
Thanks in advance.
I am not sure if this is posted in the correct section, if not, please forgive me.
Some of these questions can be answered in the sapphire wiki, which is in the sticky at the top of this sub forum.
You can only brick your phone (completely recoverable) from screwing up when flashing your spl or flashing the wrong spl
pixelkid said:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0014 (SAPP10000)
CPLD-12
RADIO-3.22.23.18
Sep 2 2009, 17:42:56​
A bunch of questions
General
1. What is SPL?
2. What are the different types and differences of SPLs?
3. What is Radio?
4. What is a "Goldcard"?
5. In what part of the proces from stock ROM to a Hero ROM is the chance of bricking the phone?
Concering my phone
1. How to you get started upgrading a stock Magic with the standard ROM to a Hero ROM? (Do you flash SPL first, recovery first, or something third?)
2. I believe but not sure, that my current SPL is a "perfect" one, do i need one of these so-called "goldcards" to get a Hero ROM?
3. How great is the chance of bricking the phone with my specs and versions, and is there any way to minimize this chance?
​
Click to expand...
Click to collapse
The only thing you need to remember from the settings is 32A. Never flash anything that doesn't say it's for 32A (not entirely correct, but safe bet ;-)).
The first thing you need is to root and install a recovery, I recommend AmonRA recovery. I never flashed SPL or radio, you can install almost all ROMs without flashing radio/SPL.
now more in detail on your questions:
1. SPL (or HBOOT) is the "Second Program Loader". Flashing this incorrectly can brick your phone, so don't do it, and you're normally safe.
2. stay with stock ;-) I only flashed an engineering SPL just last week, but was flashing almost daily ROMs. I still don't see the advantage of flashing a different SPL
3. The radio is the firmware of the 'radio' chip in your mobile. Also not safe to change for beginners.
4. Not sure, it is used for rooting some devices it seems, or to bring bricked devices back from the dead. If you need to know more, you're in trouble ;-)
5. Stay away from flashing radio/SPL and you won't brick your phone (although sometimes you need to know some 'trick' to get the phone back in useable state ;-))
how:
1. root and install a custom recovery. From the recovery you can do nifty things: mount USB, wipe, flash, make a backup, restore
2. MAKE A NANDROID BACKUP!!! With that, you can always go back to your previous state (providing you didn't brick the device)
3. take one of the 32A ports of Hero, never a ROM that is made for the Hero itself (partition layout is different, and some hardware too). I recommend my-hero 2.0.5. It works well, is made for the 32A, and safe to flash.
You can find more details on those steps in the forum, but I hope some of it has become more clear.
jos
josdehaes said:
The only thing you need to remember from the settings is 32A. Never flash anything that doesn't say it's for 32A (not entirely correct, but safe bet ;-)).
The first thing you need is to root and install a recovery, I recommend AmonRA recovery. I never flashed SPL or radio, you can install almost all ROMs without flashing radio/SPL.
now more in detail on your questions:
1. SPL (or HBOOT) is the "Second Program Loader". Flashing this incorrectly can brick your phone, so don't do it, and you're normally safe.
2. stay with stock ;-) I only flashed an engineering SPL just last week, but was flashing almost daily ROMs. I still don't see the advantage of flashing a different SPL
3. The radio is the firmware of the 'radio' chip in your mobile. Also not safe to change for beginners.
4. Not sure, it is used for rooting some devices it seems, or to bring bricked devices back from the dead. If you need to know more, you're in trouble ;-)
5. Stay away from flashing radio/SPL and you won't brick your phone (although sometimes you need to know some 'trick' to get the phone back in useable state ;-))
how:
1. root and install a custom recovery. From the recovery you can do nifty things: mount USB, wipe, flash, make a backup, restore
2. MAKE A NANDROID BACKUP!!! With that, you can always go back to your previous state (providing you didn't brick the device)
3. take one of the 32A ports of Hero, never a ROM that is made for the Hero itself (partition layout is different, and some hardware too). I recommend my-hero 2.0.5. It works well, is made for the 32A, and safe to flash.
You can find more details on those steps in the forum, but I hope some of it has become more clear.
jos
Click to expand...
Click to collapse
Thanks alot for your answers! It was helpfull. However you say that i don't have to flash a new SPL, are you sure about that? I believe i've read somewhere i'd have to flash a new one in order to get root access because i have a perfect SPL - please correct me if i am wrong
You really don't need to flash SPL (unless for cursorsense). You DO need to flash recovery, this makes everything a lot easier.
ah, you have a 'perfect' SPL, sorry, missed that part. I don't have that, so I didn't need to flash SPL at all to enjoy custom ROMs.
Can't help you with that then, search more info I'd say!
The information you provided did help indeed.
However i found out how to make a goldcard, now i just need to know if i found the right SPL to flash.
Would this be the right one for me?
http://forum.xda-developers.com/showthread.php?t=548218
(ROM v2.53.707.2 (Engineerings SPL v1.33.2010) - MD5 : F9674D19BE5F949D0D9DC99714D210E3)
Don't know enough about SPLs to help you on this one.
Anyone else?
read at least this very carefully:
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking

Will This Work or Brick My Phone?

Okay my phones info is as follows:
UK Vodafone running Donut 1.6
Code:
SAPPHIRE UNKNOWN 32B SHIP S-ON G
HBOOT-1.33.0007 (SAPP10000)
CPLD-10
RADIO-2.22.19.261
Jul 31 2009, 15:49:25
Now is this or is this not a perfected SPL "1.33.0007" as I cant do jack with it nor can I get any computer to recognize it when it's in fastboot connected to a PC...*sigh* (although it will when it's turned on)
Now assuming the above is correct and it is a perfected spl will the below work:
Step 1
Flash the phone with the 32A ROM v2.53.707.2 (Engineerings SPL v1.33.2010) this being a higher rom version than my own from Amon_RA's thread (http://forum.xda-developers.com/showthread.php?t=548218)
Step 2
Change the radio (any recommendations?) back to that of a 32B HTC Magic device and install CyanogenMod using the info again from a different Amon_RA thread (http://forum.xda-developers.com/showpost.php?p=4314039&postcount=1)
Step 3
Sit back and bathe in the glory of my finally rooted HTC Magic?
Thanks in advance for any and all help even if it's just a quick reply to tell me I'm off my trolley and it's a sure fire way to brick my phone
Has anyone managed to get anywhere with this hardware. I have exactly the same version of hardware and have not been able to get it to connect to the pc in fastboot.
I would imagine that a lot of people are in the same position, with the same hardware so could someone point us in the right direction please.
dreamsofubuntu said:
Now is this or is this not a perfected SPL "1.33.0007" as I cant do jack with it nor can I get any computer to recognize it when it's in fastboot connected to a PC...*sigh* (although it will when it's turned on)
Click to expand...
Click to collapse
Yes, 1.33.0007 is a perfected SPL, but nevertheless you should get fastboot to recognize your phone. Did you properly install the Android SDK USB drivers?
Thanks in advance for any and all help even if it's just a quick reply to tell me I'm off my trolley and it's a sure fire way to brick my phone
Click to expand...
Click to collapse
I had the same perfected SPL on my 32B but (luckily) with Android 1.5 CRC24.
I think it should work if you flash a "official" vodafone 1.5 CRC24 1.33.0007 image, then install flashrec on Android, change the recovery Image, boot into recovery mode and flash an engineering spl. Thats basically what I did, except for the downgrade to 1.5.
AFAIK on 1.33.0007 you should be able to downgrade without a goldcard.
Same Version
Hello everybody,
i have the same phone with the same SPL, too.
My Problem is when i try to flash the sappimg.zip with the POWER on and Volume down methode, everything wents fine.
But after reading the Update File i end up with an error like:
"Main Version is older".
Don't know what to do...
Phone HTC Sapphire (Magic) 32B Ship S-ON G
SPL(hboot): 1.33.0007 (SAPP10000)
CPLD-10
I already tryed a Goldcard, but no luck at all
Any Ideas.
I readed 2 Threads, they got a problem with theire devices,
it also was an 32B Magic and they wanted to do an update, too.
And they ended up with the same error message, so they tryed
to flash a 32A Image, and then the 32B, and it worked.
But i am worried, don't want to brick my device.
Anybody out there, with an idea?
Greeting
ZabbensX
i got the exact same problem. waiting for answers...
If you are running Donut Rom DRC92 then at the moment you are stuck. We need to wait until a higher firmware with a non-perfected SPL is released. If you are running a Cupcake Rom (starts with a C) then you can upgrade fine. I'm in the same situation after bricking my first phone using a RUU (they are for 32As only). Luckily Vodafone replaced it under warranty but I have ended up with the perfected SPL.
After having root and now unable to get root I can't say I miss it much. It makes you think what do you need root for? One of the reasons was the ability to flash custom roms but no disrespect to all the Hero Rom developers but NONE of them run well on a 32B Magic. Cyanogens software is good but what does it do that stock firmware doesn't? Any way hopefully Eclair won't be long, a new Rom will be released and we can all change to an engineering SPL and all will be jolly again.
what's ur OS ? Can HTC sync read ur device ?
No HTC Sync doesn't recognize my phone
Wayneh73 said:
If you are running Donut Rom DRC92 then at the moment you are stuck. We need to wait until a higher firmware with a non-perfected SPL is released. If you are running a Cupcake Rom (starts with a C) then you can upgrade fine. I'm in the same situation after bricking my first phone using a RUU (they are for 32As only). Luckily Vodafone replaced it under warranty but I have ended up with the perfected SPL.
After having root and now unable to get root I can't say I miss it much. It makes you think what do you need root for? One of the reasons was the ability to flash custom roms but no disrespect to all the Hero Rom developers but NONE of them run well on a 32B Magic. Cyanogens software is good but what does it do that stock firmware doesn't? Any way hopefully Eclair won't be long, a new Rom will be released and we can all change to an engineering SPL and all will be jolly again.
Click to expand...
Click to collapse
Thats the reason I want to use the 32A rom as it's newer then my current rom and so it *should* hopefully flash the phone including the spl and then I can change the radio back to that of a 32B device
also what do you mean about being able to change to an engineering spl in Eclair?
Also I've never been able to get HTC Sync to work ever =[ in both xp or vista, and never been able to get the drivers working properly however I am yet to try with Ubuntu
dreamsofubuntu said:
Thats the reason I want to use the 32A rom as it's newer then my current rom and so it *should* hopefully flash the phone including the spl and then I can change the radio back to that of a 32B device
also what do you mean about being able to change to an engineering spl in Eclair?
Also I've never been able to get HTC Sync to work ever =[ in both xp or vista, and never been able to get the drivers working properly however I am yet to try with Ubuntu
Click to expand...
Click to collapse
You should be able to get both fastboot and adb to recognise your phone although you won't be able to do anything. That sounds like a driver issue. If you go to the HTC website and download the latest drivers (pick the ones for the HTC branded magic) you should be ok. Try the link below.
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=267&act=sd&cat=all
As for flashing a 32a rom then changing the radio, good luck with that after already bricking one phone I haven't got the balls to try. If you do try and it works please post here exactly what you done as many people will thank you.
Lastly what I'm waiting for is a higher rom version which will probably be eclair (Android 2.0) which comes with a non-perfected SPL. Then the devs on here can get the relentless rooter to work on our phones.
Wayneh73 said:
You should be able to get both fastboot and adb to recognise your phone although you won't be able to do anything. That sounds like a driver issue. If you go to the HTC website and download the latest drivers (pick the ones for the HTC branded magic) you should be ok. Try the link below.
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=267&act=sd&cat=all
As for flashing a 32a rom then changing the radio, good luck with that after already bricking one phone I haven't got the balls to try. If you do try and it works please post here exactly what you done as many people will thank you.
Lastly what I'm waiting for is a higher rom version which will probably be eclair (Android 2.0) which comes with a non-perfected SPL. Then the devs on here can get the relentless rooter to work on our phones.
Click to expand...
Click to collapse
Okay thanks =] will see if I can get the drivers working with Ubuntu via the Android SDK although I cant try the Goldcard method until I get hold of another memory card as I've misplaced the one that came with the phone
dreamsofubuntu said:
Okay thanks =] will see if I can get the drivers working with Ubuntu via the Android SDK although I cant try the Goldcard method until I get hold of another memory card as I've misplaced the one that came with the phone
Click to expand...
Click to collapse
u cant access it unless u enable USB debugging. If u cant pass activation, then ur screwed until u activate it with 3G
hacker1 suggested this:
Okay I post this as a private message because I don't know if I can post the links to the images on an official board.
There are basically 2 methods for flashing/rooting the 1.33.0007.
Method 1:
1.Download Android 1.5 CRC24 NBH
2. rename to sappimg.nbh and copy to sdcard
3. start magic with volume down+power
4. confirm with trackball
5. If everything works ok, follow 8. on method 2
If this fails with "Main version older" then copy sappimg.nbh to a goldcard and try again. (Some brands of SD-Cards are known to be incompatible with a goldcard, so you might need to try some different ones)
If it fails to flash with a goldcard you need method 2:
1. Download Android 1.5 CRC24 NBH (if you don't have it already)
2. Download 32A Image
3. rename 2.53.707.2_-_sappimg.zip to sappimg.zip and copy to goldcard
4. start magic with volume down+power and confirm flashing with trackball
5. turn off phone
6. delete sappimg.zip from goldcard and copy the "Android 1.5 CRC24 NBH" as sappimg.nbh to sdcard
7. start magic with volume down+power and confirm flashing with trackball
8. after restarting you should now be at Android 1.5 CRC24, install flashrec.apk to phone, change recovery image, boot into recovery and flash engineering spl.
Hope this will help you.
Click to expand...
Click to collapse
hasnt worked for me yet.
IsmailBhai said:
u cant access it unless u enable USB debugging. If u cant pass activation, then ur screwed until u activate it with 3G
Click to expand...
Click to collapse
USB debugging was one of the first things i turned on =]
In the same mess....
I hope someone can figure this out soon, I'm also in the same boat and cannot root my mt3g. It has the following specs:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.2007 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
Jul 31 2009, 15:49:25
Click to expand...
Click to collapse
I have tried the following methods...
sappimg.zip + goldcard
Model ID incorrect!
Update Fail!
SAPPIMG.nbh
Main Version is older!
No luck, just errors. Anyone got any suggestions?
xepergod said:
I hope someone can figure this out soon, I'm also in the same boat and cannot root my mt3g. It has the following specs:
I have tried the following methods...
sappimg.zip + goldcard
Model ID incorrect!
Update Fail!
SAPPIMG.nbh
Main Version is older!
No luck, just errors. Anyone got any suggestions?
Click to expand...
Click to collapse
Not yet and the fact that none of the senior members are bragging any where they can do it I think we are pretty much stuck. In fact no-one is talking about trying to hack this so I think it maybe in the too difficult bin! Time to save up and get a Nexus One
nooooooooooo
Wayneh73 said:
Not yet and the fact that none of the senior members are bragging any where they can do it I think we are pretty much stuck. In fact no-one is talking about trying to hack this so I think it maybe in the too difficult bin! Time to save up and get a Nexus One
Click to expand...
Click to collapse
Dream killer
32A Rom on your 32B may brick your phone
dreamsofubuntu said:
Thats the reason I want to use the 32A rom as it's newer then my current rom and so it *should* hopefully flash the phone including the spl and then I can change the radio back to that of a 32B device
also what do you mean about being able to change to an engineering spl in Eclair?
Also I've never been able to get HTC Sync to work ever =[ in both xp or vista, and never been able to get the drivers working properly however I am yet to try with Ubuntu
Click to expand...
Click to collapse
*IF* you load the 32A radio and SPL and ROM on your 32B, you may only succeed in bricking your phone.
They are different devices. You can try it if you like, but be ready to throw the phone away.
dreamsofubuntu said:
Okay my phones info is as follows:
UK Vodafone running Donut 1.6
Code:
SAPPHIRE UNKNOWN 32B SHIP S-ON G
HBOOT-1.33.0007 (SAPP10000)
CPLD-10
RADIO-2.22.19.261
Jul 31 2009, 15:49:25
Now is this or is this not a perfected SPL "1.33.0007" as I cant do jack with it nor can I get any computer to recognize it when it's in fastboot connected to a PC...*sigh* (although it will when it's turned on)
Now assuming the above is correct and it is a perfected spl will the below work:
Step 1
Flash the phone with the 32A ROM v2.53.707.2 (Engineerings SPL v1.33.2010) this being a higher rom version than my own from Amon_RA's thread (http://forum.xda-developers.com/showthread.php?t=548218)
Step 2
Change the radio (any recommendations?) back to that of a 32B HTC Magic device and install CyanogenMod using the info again from a different Amon_RA thread (http://forum.xda-developers.com/showpost.php?p=4314039&postcount=1)
Step 3
Sit back and bathe in the glory of my finally rooted HTC Magic?
Thanks in advance for any and all help even if it's just a quick reply to tell me I'm off my trolley and it's a sure fire way to brick my phone
Click to expand...
Click to collapse
I do not know if this helps you guys.http://theunlockr.com/2009/10/15/how-to-root-a-donut-phone-android-1-6/
All phones are diffrent I have perfect spl too and I manage to flash in fastboot.
I've found something which I think might help on a German android forum and it looks like the guy succeeded in doing something similar to what I posted originally in this thread from what I can gather from google translate
http://www.android-hilfe.de/root-hacking-modding-htc-magic/11285-flashen-mit-1-33-0007-spl.html
can anyone help me out and post a translation for me? (I mean someone who can give a translation not from a website unless it's blindingly better then google)
Current translation via google...
edit -
it should be called "flashed with SPL 1.33.0007"
--
Hello, nice forum you have here
I have the following problem:
Recently I wanted to flash my Vodafone Magic (Android 1.6 SPL 1.33.0007) with Cyanogenic Mod.
Since I have a "perfect" SPL, I've tried it with a gold card. Everything went well so far. Only apparently I had made a version for the 32A, then stood for in fastboot Ship S-OFF H and I could only make recovery for the HTC version of RA, rather than the Google version. I had taken here -> ROM v2.53.707.2 (SPL engineering had v1.33.2010) the rom but works as well and booted normally.
anyway I wanted to be the recovery of RA have wrote -> HTC_ADP_1.6_DRC83_rooted_base.zip CM 4.2.5 and later.
The flash itself went well, but I stayed in the HTC bootscreen Magic hang himself and it did nothing more.
In another forum I was told that what I have by gold card (power + vol down) flashed (the sappimg.zip) was just for the 32A, and it therefore did not go.
Jetz, I wanted to ask what am I then can take the 32B, then to flash it to the cyanogenic mod? Because irgednwie I'm a little confused at the 10,000 versions at XDA dev .....
I hope someone can help me there. I'm just glad that the phone because I did not have gebricked garkeine backup (duchzufall had found it here in the forum, the firmware vodafone stock and re-flashed)
thank you in advance
-edit -
ah, I'm stupid.
The stock firmware I had was re-flashed V1.5 .. have then by Flashrecovery the CMrecovery flashed and book now funzt everything.
no offense
Click to expand...
Click to collapse
So from what I can gather this guy succeded in rooting and flashing his HTC Magic 1.33.007???????????

Rogers forced upgrade = perfected SPL?

Hi everyone,
Been trying to root my phone since yesterday and had a bit of trouble. Now it seems that the SPL I have is a perfected one as I am unable to use fastboot for recovery.img (not allow error).
This is what I have:
Sapphire PVT 32A Ship S-ON H
1.76.0010 (SAPP50000)
CPLD 12
Radio 6.35.10.18
Is there a way to change this SPL at this time? I know there are ways for older ones but I wasn't sure that I should be changing to an older SPL (and risk bricking my phone) so I thought I'd ask first!
Any advice/input greatly appreciated.
furie said:
Hi everyone,
Been trying to root my phone since yesterday and had a bit of trouble. Now it seems that the SPL I have is a perfected one as I am unable to use fastboot for recovery.img (not allow error).
This is what I have:
Sapphire PVT 32A Ship S-ON H
1.76.0010 (SAPP50000)
CPLD 12
Radio 6.35.10.18
Is there a way to change this SPL at this time? I know there are ways for older ones but I wasn't sure that I should be changing to an older SPL (and risk bricking my phone) so I thought I'd ask first!
Any advice/input greatly appreciated.
Click to expand...
Click to collapse
Yeah that's a perfected SPL. I assume Recovery Flasher doesnt work? If you can't use Recovery Flasher then you are out of luck until someone can break into those phones.
Keep in mind the hero recovery is the only one that works with the 6.x Radio.
Arrrgh!!! I'm tempted to go to the Rogers store and exchange my Magic for another one (without the upgrade on it). I still have 8 days to do so according to Rogers policy...
chances are you'd get another with perfected spl.
This is how i got mine working from perfected spl->custom rom
If you want a different rom, dont follow the last 2 links, and find whatever you want to flash, after the first 2 links you will have a non-perfected spl and be able to flash whatever your heart desires.
There are easier ways to do this if you are not running windows 7. Apparently theres a way using htc sync, but i cant get it working, even with all of the fixes that people have claimed work for them
PurpleFries said:
u can have a sense ui running on 1.5, if you are only concerned with how it looks. Just flash the cursorsence rom, if u have 32a phone. ensure u dont have a perfect spl. If you did the rogers dream->magic switch, likely you have a 32a phone with 1.33.0010 perfect spl. you must get rid of this first.
here's some links to help you out as i did this process yesterday. took me a helluva long time.
Goldcard Method
Fix perfected spl using this goldcard
MAKE SURE YOU HAVE THE RIGHT RADIO AND SPL!!!!!.
Radio and spl upgrade
Cursorsence
Click to expand...
Click to collapse
For the video in that link, watch up until the point where he tests the goldcard by putting it back into his computer to see if it opens. You don't need to follow his instructions past there
PurpleFries said:
chances are you'd get another with perfected spl.
This is how i got mine working from perfected spl->custom rom
If you want a different rom, dont follow the last 2 links, and find whatever you want to flash, after the first 2 links you will have a non-perfected spl and be able to flash whatever your heart desires.
There are easier ways to do this if you are not running windows 7. Apparently theres a way using htc sync, but i cant get it working, even with all of the fixes that people have claimed work for them
For the video in that link, watch up until the point where he tests the goldcard by putting it back into his computer to see if it opens. You don't need to follow his instructions past there
Click to expand...
Click to collapse
Thanks, I'll give that a try. I'm actually using Windows 7 so I'll have to do it that way.
Does it matter that my SPL is 1.76.0010 rather than 1.33.0010?
umm.
Actually im not 100% sure. Kuz i know messing with the radio and spls can be problematic if you flash them incorrectly... I personally would go straight to flashing These instead of going to 1.33.2007
maybe wait for someone more experienced to comment, kuz radio and spl being flashed wrong will result in a brick
PurpleFries said:
umm.
Actually im not 100% sure. Kuz i know messing with the radio and spls can be problematic if you flash them incorrectly... I personally would go straight to flashing These instead of going to 1.33.2007
maybe wait for someone more experienced to comment, kuz radio and spl being flashed wrong will result in a brick
Click to expand...
Click to collapse
Its 1.76.2007 not 1.33.2007. For now u need some practice at stage 1 - keep your original radio & spl. Otherwise like u said yourself, BRICK!
Got the HTC Magic upgrade through Rogers...
Perfected SPL
Since they still use 1.5 (yet they claim they care about security, lol) RecFlash works a charm.
Install RecFlash, slash RA's Recovery, then use it to flash the ROM.
w00t!
furie said:
Hi everyone,
Been trying to root my phone since yesterday and had a bit of trouble. Now it seems that the SPL I have is a perfected one as I am unable to use fastboot for recovery.img (not allow error).
This is what I have:
Sapphire PVT 32A Ship S-ON H
1.76.0010 (SAPP50000)
CPLD 12
Radio 6.35.10.18
Is there a way to change this SPL at this time? I know there are ways for older ones but I wasn't sure that I should be changing to an older SPL (and risk bricking my phone) so I thought I'd ask first!
Any advice/input greatly appreciated.
Click to expand...
Click to collapse
I have the same config as you are. I used procedure from theunlocr.com. "HTC Magic one click". Now Im on 2.1
The one on my sig is my Dream the one I rooted to 2.1 is the Magic (free HU)
asiano said:
I have the same config as you are. I used procedure from theunlocr.com. "HTC Magic one click". Now Im on 2.1
The one on my sig is my Dream the one I rooted to 2.1 is the Magic (free HU)
Click to expand...
Click to collapse
you sure I try and it doesn't allow me to backup or to upgrade...
I'm on the new rogers spl... the 1.76.0010.
can you give alittle more detail how you have rooted?
Thank you
fatcow167 said:
you sure I try and it doesn't allow me to backup or to upgrade...
I'm on the new rogers spl... the 1.76.0010.
can you give alittle more detail how you have rooted?
Thank you
Click to expand...
Click to collapse
Yes please share, I'd like to go to 1.6 or 2.1 too!
fatcow167 said:
you sure I try and it doesn't allow me to backup or to upgrade...
I'm on the new rogers spl... the 1.76.0010.
can you give alittle more detail how you have rooted?
Thank you
Click to expand...
Click to collapse
me and asiano both did the same thing, just follow this here procedure:
http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/
I've tried that method with the new rogers update (SPL 1.76.0010), and it doesn't seem to work for me. The flashrec website even states it doesn't work with firmware released after November '09. Are you sure you had the new update when you rooted using this method?
XC3N said:
me and asiano both did the same thing, just follow this here procedure:
http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/
Click to expand...
Click to collapse
yes but i think you don't have a perfected spl, we are not able to root because our spl version is 1.76.0010... can you confirm you got the same?
I have an updated Rogers ROM and Goldcard will not work with the current ENG SPL. Outdated
Same with me. Stuck on this ROM. I think whomever says they were able to get root with 1 click method or flashing the Engineering SPL did not have the same setup as those of us who are stuck. I've devoted about 20 hours so far to getting root again. None of the methods are working, and yes I'm following the directions to the letter. This is really starting to piss me off.
Is there anyone working on trying to root this new Rogers update ROM? It seems like most of the people who do this stuff have moved on to the Droid and N1. Do we need to start a fund to entice one of the people who rooted the other ROMs to come back and revisit Rogers 1.5 Sense? I'd throw $10 US into the pot.
Any other ideas?
im in!
10$ US, im in!
I'm in for $10
God I hate Canadian cell providers.
Can the phone still be unlocked to use on a different carrier though??
10$
Totally in. 10 bucks is a small price to pay for a rooted phone.

32A being difficult - Perfect SPLed? (remote: not allow)

Hi guys,
Recently picked up a White 32A Magic and am having difficulties with it. Info is:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0007 (SAPP10000)
CPLD-12
RADIO-6.35.07.29
Aug 4 2009, 19:43:30
Laptop is loaded with working drivers as have previously flashed two others 32A's with CyanogenMod.
The phone gives the FAILED (remote: not allow) response when trying to fastboot into RA_Amon's latest Hero recovery image.
Am I stuck here?
It looks like I can't goldcard it because I need to flash to a higher ROM and there is not one available.
Yet Amon_RA states specifically in his Hero recovery thread that "it will also work on the 32A Sapphire if you flashed the 6.35.x.x radio and 1.76.x SPL".
If it's of any use, I believe the phone originated in Thailand (has the CN Thai Keyboard).
Help?
Would appreciate any input.
Thanks
Scott
Quick question... did you bother to read any of the stickies on top of this section of the board?
Sure did, wanna direct me to which one answers my question?
Also searched, and found conflicting information, hence started a thread.
scawtt said:
Sure did, wanna direct me to which one answers my question?
Also searched, and found conflicting information, hence started a thread.
Click to expand...
Click to collapse
I would, except I'm not familiar with which SPL to use with the new radio, since that kind of opens up a few more possible ways to get bricked.
Exactly why I started a new thread. There is no thread I can find, nor external site, which already covers my exact situation.
U'r not searching or reading at all.
http://forum.xda-developers.com/showthread.php?t=548218
I've reread your post several times and still don't understand why you can't use a goldcard. That's a perfected SPL but I'm 99.9% sure it's rootable. You can't use fastboot because you need an ENG SPL. A goldcard downgrades or just basically changes your SPL/Radio, why would you want to go to a "higher" aka upgrade your rom? That might just bring you to an unrootable SPL. You should be able to downgrade it using a goldcard. Maybe this will help? I have a hero with basically the same info that you've provided and simply used flashrec to root it. I did have to use a goldcard though. I don't see why you can't use a goldcard. Do you know what a goldcard does? I doubt it.
I love how you say it looks like it doesn't work with a goldcard. Did you TRY it?
kencix said:
U'r not searching or reading at all.
http://forum.xda-developers.com/showthread.php?t=548218
Click to expand...
Click to collapse
Haha, so true. +1 to this. I decided to take a look, it's everywhere in there.
scawtt said:
Exactly why I started a new thread. There is no thread I can find, nor external site, which already covers my exact situation.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=625108
http://forum.xda-developers.com/showthread.php?t=548218&page=23
It's everywhere, you didn't try did you? I type in google "Fix perfected SPL" and "htc magic perfected spl" and the guide kencix gave you is right there. Make yourself useful and don't make useless threads. This also has nothing to do with Android Development.
@scawtt: My magic had the same specs of yours. I follow this step-by-step and my phone is rooted now.
ramersonw said:
@scawtt: My magic had the same specs of yours. I follow this step-by-step and my phone is rooted now.
Click to expand...
Click to collapse
This is the only helpful post in the thread. Listen to this man.
No offense to others, but all he wanted was what ramersonw said.

Categories

Resources