hi guys, i have an unlocked sim HTC diamond (originally from SFR france),the problem is that after i have configured well my diamond to wap (proxy ip,modem access point,username and password) ,when i try to surf i do actually see the symbol G above the signal strength so it has connected but an error comes up after like a minute saying the connection was lost (no download)....is it because i have unlocked it using olinex stuff ?please help.
I Suspect you misconfigured your diamonds internet settings the connection is established but you cant connect to the isp gateway perhaps you need to use proxy. maybe your outa credit ?
NO,i am not out of credit cause it worked on my nokia pretty well.
I installed WM6.5 instead of 6.1 ,the good news is that the phone automatically
detected the WAp settings, but same problem, no download (lost connection)
Resolved.
Must have username and password for the access point and also for the wap in the proxy server.
Related
Despite all my efforts with Virgin Mobile in the UK I cannot get the correct GPRS settings. They claim their network supports GPRS.
Has anyone set it up?
virgin gprs settings
What are you settings?
Virgin GPRS
I can connect using the setting supplied on the virgin site but I cannot browse web pages - I get the page is not available message box.
I do get the small [GPRS] displayed at the top of the internet explorer bar but havent managed to view a web page or use MSN messenger over GPRS.
If any one has I'd love to know the settings please : )
Ian
It could be the same as O2, you are allowed only wap access over gprs.
GPRS on unlocked O2 XDA
Ok is anyone using a UK unlocked O2 XDA2 using a PAYG SIM (any network - dont mind) and able to browse internet and use msn messenger?
If you are please can you let me know the network and your settings? I have read most of the previous posting and have not managed to set up this up yet - surely its just me being thick and it's possible
Many thanks
Hiya
yes used both O2 and now virgin in an unlocked XDAII - at this moment trying to figure out the settings for it all but getting there - will update soon.
GPRS on unlocked O2 XDA
many thanks look forward to your reply - can you detail all the setting you are using under connections etc please?
Not too bothered about the MMS but would definately like to have web and msn working
regards
Ian
Ok here are the settings, but i am having problems - if i use the IP it doesnt connect, but if i don't it connects but i don't get any response from pages - i have noticed the xda is deleting the zeros(shown in red) - but as i gather this is normal for an IP to do this? (sysadmins advise?)
APN: goto.virginmobile.uk
IP address: 193.030.166.003
username: user
password: <blank>
homepage: http://www.virgin.com/mobile/wap/
If you crack it, let me know!
Is it possible to permanently affect my Wizard's internet connection by over flashing??
I'm having a problem connecting to the internet. It doesn't connect via WiFi whether on an open or WEP network (I'm testing it with 2 routers -- mine and my neighbors). It connects to GPRS just fine as long as I put the right ISP info. But when I try to load a page in IE it comes back with 1 of 2 error messages:
1)
Error 502 - Bad Request
The server could not resolve your request for uri:
2)
Cannot obtain a server-assigned IP address. Try again later or enter an IP address in Network settings.
I was running a custom made vanilla 1413 for the longest time. Then yesterday tried MFrazzz's 1913 and now ANTC's. Between one of those two I am not unable to connect to the internet. I even flashed back to the 2.24 official T-Mo ROM and even with the factory settings it still not working for either GPRS or WiFi. In the past hour I've tried T-Mob official, ANTC 2.0 and XM6R4...all the same problem.
So that virtually eliminates the possibility that it was either a bad radio, corrupted Ext ROM or a bad flash. It definately seems like my Wizard isn't being given an IP address. So that would be a software/ROM/registry problem, right? Well then why is it not working with 3 fresh ROM flashes??
Any suggestions??
If I connect it to my PC via usb/activesync and use the PC's internet connection then it will go ahead and load webpages.
As soon as I disconnect the USB cable then it'll load up the GPRS connection and try to load a webpage and timeout with one of the errors above.
One strange thing I noticed is that when it gives the 502 error it removes the domain from the uri. Example:
Target URI:
http://mobreader.com/proxy.aspx?s=http://test.com...
Response:
Error 502 - Bad Request
The server could not resolve your request for uri: /proxy.aspx?s=http%3A%2F%2Ftest%2Ecom...
seems your proxy is not functioning correctly
reflash with original rom and then this rom you would like
you can also try and delete all connections but i doubt it helps..
I'm on T-Mobile full internet plan, not T-Zones or anything, so no need to set a proxy. Just put in the access point as wap.voicestream.com and it should work.
I've input the data manually as well as tried with the t-mobile wap setting cabs. Doesn't make a difference. Also since these are freshly installed ROMs (including an official T-mobile ROM) there shouldn't be any proxy settings pre-set, right?
yes i am aware of that..
i need to explain myself more , sorry for that..
what i mean is the proxy inside the phone , not the one u setup with t-zones
or any related..
Ok a little update...
I was able to connect via Wifi this morning, it was either
A) Registry changes to HKLM>Comm>TNETWLN1>Params>HTCPreloadStatus to value of "1"
B) Registry change to HKLM>Comm>TNETWLN1>Params>HTCPreloadWifi to value of "1"
The router assigned me an IP address now and fully connected. I'm able to pull up websites now. Sometimes the above registry settings mysteriously change back to "0" value and if that happens then I won't be able to pull up a website. So I know what was causing the WiFi issues.
But still don't know what's the problem with GPRS. Still can't load a website via URL or even IP address. Is there a similiar registry edit that I can make that will restore GPRS connection ability?
Thanks in advance guys.
CYTA's customer service is not very familiar with HTC devices. So, to save other Polaris owners in Cyprus from all the trouble, here are the settings:
MMS options
Servers
server name: cytamobile
gateway: 212.31.96.161
port number: 9201
server address: http://mmsc.cyta.com.cy
connect via my isp
settings
connections
connections
my isp
new isp
name: mms gprs
modem: cellular line (GPRS, 3G)
access point name: cytamobile
usename: user
password: pass
do not enter any other info since it will block everything
(e.g
advanced
server
use specific server address: 195.14.130.186)
Thanks man
Cyta is useless
thanks from me too.... you walk in an they have no idea all you hear nokia nokia small minds are ....... well you know what i mean ..
ur welcome
Thanks man, this is cool!
Thanks a lot.
Cyta are useless.
Anyway...I still havent decided which of the Kaiser / Cruise to buy.
Where did u get your Cruise from? Greek Rom?
Would you recommend Cruise?/problems?
Which Navigation program do you use Cyprus?
chris2004 said:
Thanks a lot.
Cyta are useless.
Anyway...I still havent decided which of the Kaiser / Cruise to buy.
Where did u get your Cruise from? Greek Rom?
Would you recommend Cruise?/problems?
Which Navigation program do you use Cyprus?
Click to expand...
Click to collapse
i recommend the cruise. got it from expansys.gr WWE rom.you can add greek fonts and characterset with software. kaiser bit bulky for me. +fm radio on cruise. use pocket navigator 7 for cy.
I have done all the above for the mms cyta settings to my Polaris. I can send a MMS as well as emails but I have a problem with internet explorer. When I try to open the Internet explorer and Opera, it automatically connect to mms gprs, but I cannot connect to the internet. When using the explorer I get the following message
''Could not connect to remote server.''
Also everytime I do a soft reset I got the following message:
''The operator does not exist in the database. Please contact your operator for the connection settings.
Connection setup will redirect you to the connections screen.''
and when I close this notification it directs me to the connections.
Can you please help?
i tried out hsdpa/3g for the first time last night by turning on data connection in comms manager .. but all i got was errors when dialing? do i need to input anything in the proxy/modem connection settings?
help please
thanks
just rang o2 who said the HTC phones likewise blackberry phones are not compatible with O2 payg for internet servies :S i asked why they were then find for contract but was told that there are difference settings for payg/contracts which will only work with the appropriate sim. ... what can I do now? Is this going to be the same for all network's payg options?
please help ... anyone who is on a payg contract wth a sim free raphael or with any other suggestions.
thanks
thats a lot of rubbish!
go to settings >connections> ad new connection
use payandgo.o2.co.uk (or payasyougo.o2.co.uk dont remember) as acces point, payandgo as user password as paswword . thats it. if it doesnt connect use 193.113.200.195:8080 as proxy
i have to say that i've got terrible connection with o2 3g! keeps catting connection to the net (not actual connection) you have to disconnect anc connect again. i dont know if it is network or phone
Hi people. I'm relatively new to Windows Mobile world, I'm used to symbian. Since I bought my WM phones I've never used wap sites, but now that I need I cant.
My network settings were set automatically by the operator (TIM Brasil), there is a GPRS/EDGE/3G connection and a WAP Connection (work).
The question is: how do I access wap sites? If I put a wap address in opera it just says "Error! You tried to access the address bla-bla, which is currently unavailable...etc"
It happens that the phone dont even try to connect to that wap connection when I get this error, its instantaneous (neither tries the edge connection)
I hope I made myself clear, I'm terrible in english writting, sorry.
respider said:
If I put a wap address in opera it just says "Error! You tried to access the address bla-bla, which is currently unavailable...etc"
Click to expand...
Click to collapse
Have you tried opening a WAP address in Pocket Internet Explorer? As far as I know it supports WAP.
HTH
Even OPERA support wap sites, cause i use it everyday to access various websites... There might be some settings issue...!!!