So i read many threads in this forum and fin a problem that many users have !
Every ROM i flash on my Kaiser (wm 6.5 roms)ends with a Hardreset !
I try to explain ,so we can release this Problem!
1.I flash a new rom (6.5)than everything is ok !
2.I configure my device (Time ,settings and so on)
3.Than after a short or a long Time (5Hours or 1Day )i softreset the device ,its make a Hardreset !
4.But before, I can softreset the device how often i want ,but after a time it ends with a Hardreset!
So it is not the first Softreset thats end in a Hardreset i can be the 5th or 20 !!!
Please write your expirence or solutions ! So we find a way
PS:sorry for my bad english (Its a long time ago i learn it ))
I believe all you need to do to fix this is to flash to the latest stock rom and then install the custom one afterwards.
This worked for me.
King-Stenz said:
So i read many threads in this forum and fin a problem that many users have !
Every ROM i flash on my Kaiser (wm 6.5 roms)ends with a Hardreset !
I try to explain ,so we can release this Problem!
1.I flash a new rom (6.5)than everything is ok !
2.I configure my device (Time ,settings and so on)
3.Than after a short or a long Time (5Hours or 1Day )i softreset the device ,its make a Hardreset !
4.But before, I can softreset the device how often i want ,but after a time it ends with a Hardreset!
So it is not the first Softreset thats end in a Hardreset i can be the 5th or 20 !!!
Please write your expirence or solutions ! So we find a way
PS:sorry for my bad english (Its a long time ago i learn it ))
Click to expand...
Click to collapse
This is what i would do before even thinking about flashing 6.5 ROM.
Always flash a stock ROM before you flash any 6.5 ROM.Statement above is proved to be correct; at least in my case.
Many senior great cookers have suggested this.
TPC: http://forum.xda-developers.com/showthread.php?t=519715
abusalza: http://forum.xda-developers.com/showthread.php?t=507281
Read the bold red instructions...
Ok i hope that will clear the Problem
But where can i get the newest stock Rom !
On the Htc Site is one but i need a Serialnumber !!
but my device is a MDA and not HTC (Have you a S/N for me)
and after flash a stockrom do i make hard spl and Cid unlocker a second time ??
Yup - make sure its a FULL stock rom from the mfg/carrier. No stripped stock roms to cut corners. that solved my problem.
King-Stenz said:
But where can i get the newest stock Rom !
On the Htc Site is one but i need a Serialnumber !!
but my device is a MDA and not HTC (Have you a S/N for me)
and after flash a stockrom do i make hard spl and Cid unlocker a second time ??
Click to expand...
Click to collapse
Please take some time and read the above mentioned forum.
TPC has the stock ROM link listed in POST 4
fmquadri said:
Yup - make sure its a FULL stock rom from the mfg/carrier. No stripped stock roms to cut corners. that solved my problem.
Click to expand...
Click to collapse
I have never had any problems flasing striped rom. No sense in flashing oem radio and oem spl just to get oem rom. One note if your phone is an ATT device flash the ATT striped rom, and if it is an HTC branded flash HTC striped rom.
Just to make it clear a striped rom is what the chefs recommend before flashing and also make sure you are using whatever radio and spl the chef suggested for his/her rom.
The whole topic of this thread has been discussed many many times over and over in every rom thread. Please search before posting your topic in the future.
Thank you
This one actually worked for me. Thanks.
I think this is the 10th I am answering this question this week! But here we go again!
I flash about 10 time a day, and about 5 different builds sometimes! I never flash to stock ROM, or do hard reset after flash.
Hope this helps.
Related
Hi all!
I really want to get start using WM6!
I have read almost every topic on unlocking and updating it to WM6,
and still it aint clear to me.
I need first of all unlock my G3 device, i've triest lokiwiz serveral times,
but everytime i get an error with a still CID locked device...
Could please someone give some clear information on how to unlock it, and witch WM6 rom i can user?!
Really thanks in avance!
http://forum.xda-developers.com/showthread.php?t=298613
Thanks for the fast reply.
I used that guide serveral times but with no results....
And why u want to cid-unlock phone?? U can flash it anyway with shelltool.
Just use the rom for wizard.
shell tool on an G3 device?!
Yeah?!!?
With this tool and my instruction you could:
1) Get info about ROM
2) Extract only OS from whole nk.nbf
3) Flash this OS to your G3/G4 CID LOCKED Device (even wm6 rom or latest aku 3.3 rom).
In atachment there are:
1) ShellTool.doc - instruction. Read first and please, follow it step by step!!!
2) ShellTool.exe with some other files that it need
3) Cert_SPCS.cab/EnableRapi.cab - should be installed on your device
etc...
Do you have a link for me?!
http://forum.xda-developers.com/forumdisplay.php?f=248
Then u go on
G4
Especially for G4 models.
and the 1st topic is 4 u.
http://forum.xda-developers.com/showthread.php?t=293480
And ofcourse.Please, read all the sticky treads. They are very very usefull and u can find the answer quicker, than posting the questions here.
have a nice day
Thanks, i already found the link.
I'm a little bit afraid to mess up my device...
Is it very riskfull to flash it with shelltool?!
Hard to tell. This mda is my 1st win mobile device and when i flashed it 3 weeks ago i was also nervous. But if u will follow the steps in tutorial, nothing bad will happen. If something go wrong, just get the phone in bootloader mode and try flash again.
I was especialy nervous, when i flashed t-mobile rom to nbd and the phone didnt start up. It just show the 1st picture ips/spl, when u turn the phon on and here stoped.I was really pissed offf, why the hell was i flashing the good working phone. heheheh But, when i after 25 min. (cause, the buttons in 1 tutorial didnt work) got the phone in bootloader mode i was really happy. This mess happen again 1 week ago, but i knew how to operate.
Close all AV, msn, adaware etc.. and flash it.
Today i will flash my g4 with nbd 8.2 8mb pool. This version, whic i have now, with 6mb is very slow. Dont know why, but the phone is unusefull. nbd 8.1 and 8.0 worked flawless compare to 8.2 6mb. ?????? Can anybody explain that??
----------------
i am sorry for all vocabulary and ~tense~ mistakes.
Is the [final] - Wrcx 5.2.1437 a good one to try out?!
I cant tell u that. Dont have experiences. I try only NBD roms.
U have to know g3 or g4, cid-lock/unlock ...
ipl/spl musn^t be included in rom , etc...
Read the treads about upgrading.I am a real noob in win mobile upgrading and all the stuff connected.
For a noob your talking very expert
Please give me a simpel guide for installing NBD v8.2 ?!
Thanks m8!
I have a G3.
IPL 2.21
SPL 2.21
OS 2.21.25
Yihaa, i've got the Wrcx 2 working, damn its hot!!!
Does anybody knows how to user TouchFLO?
Ive got it, i have to press the voicedial button, but after using it, it automaticly shuts down again, so i have to press the button again?!
U got it!!
Are u talking about commanager?? Pres touchflow and then slide to the right or left. U close the "cube" if u slide up. To open the cube u have to press the touchflow and slide again. work perfect.
Another great release is iphone contactmanager. works perfect and it looks even better. http://www.savefile.com/files/970745
Hi everybody,
I made up a new version of pof's USPL for ELFIN based on SPL 2.20.0000. You should be able to flash SPL in the third step now.
Why a new version? Because USPL v1 is only for ELF (64/128MB), but not for ELFIN (128/256MB). Flashing the old ELF SPL in step three on a new ELFIN used to brick your device.
EDIT:
You can find the working release in the following thread:
http://forum.xda-developers.com/showthread.php?p=1964159#post1964159
Thanks to everybody who was willing to test this!
Tempting, tempting.
I still haven't reproduced that weird blue screen i once had on my ELF.
But like i just wrote i got's me an ELF.
Good luck finding resourcefull Gamblers.
If there's no luck just start a Donation round for a Bricked Device Garantee
djvw said:
insane people
Click to expand...
Click to collapse
We have a lot of those in this forum. People trying to flash first and then start reading .
Thanks for trying to get USPL working for the XL users!
ummmmm i just used to use the old uspl v1 and exit after step 3 than flash my rom, if you guys are really keen on testing this my new elfin will be here today or on monday and i will try it with my old one just to piss of rogers
shael said:
ummmmm i just used to use the old uspl v1 and exit after step 3 than flash my rom, if you guys are really keen on testing this my new elfin will be here today or on monday and i will try it with my old one just to piss of rogers
Click to expand...
Click to collapse
This is the kind of brave people we need ;-) Please test it and tell us if it's working as soon as you can. Thank you in advance!
Uploaded new version, please redownload in first post.
Nobody has tested this yet?
I think that a Elfin dopod owner can test this without problems, because if don't work he can flash the complete (and signed) dopod rom from bootloader to restore the original SPL...
http://www.dopodasia.com/download/R...7.1B_4.1.13.51_03.07.90_BLUE_Ship_Reduced.exe
i have a elfin locked on bootloader screen....can change my spl with this??
what ??? the UPSL 1.0 is for Elf only and not Elfin ??? what i dont understand is what do you guys mean quit at step 3 ??? I flashed my Elfin with UPSL 1.0 with all steps for more than 6 times so far and nothing has happen so far ... my SPL is the 2.20.2000 one ...
@jamezco:
that´s wrong.
You flashed those roms containing the USPL (start.bat). They automaticly quit the 3rd step and go directly to the Rom Utility to flash the new ROM.
If you use POF´s USPL v1 and you don´t quit after step 3, the patched Bootloader will be flashed from your devices RAM to the ROM, and this wil brick your ELFin. If you have done this, your actual IPL or SPL would be 1.11.xxx...
Sorry: could someone explain me whether it is strictly needed to use the USPL unlock (the one are treated in this post) to flash the PDA?
I mean: the bootloader in the rom package is not able to do that?
we need some thing to unloack direct from boot loader and no need to active sync
as far as i know this is not possible, cause you can´t access bootloader files...in bootloader mode.
same on pc, you can´t delete or replace files, which are open/inuse by another program...
STRAFALCIONE said:
Sorry: could someone explain me whether it is strictly needed to use the USPL unlock (the one are treated in this post) to flash the PDA?
I mean: the bootloader in the rom package is not able to do that?
Click to expand...
Click to collapse
The Rom Packages u can get here don´t contain a bootloader...and even if they would, the bootloader or the rom would have to match your model ID for flashing it to your device....so yes, it´s stricktly needed to CID unlock to flash Custom ROMs or ROMs with other vendor IDs.
Could someone help me? The USPL is needed for the flashing of ROM, or is it enough the bootloader of the ROM?
Sorry, I missed the answer of the post before
My eyes are crossing after 12 hours in front of the pc
Anyone tested already???
Come on guys,
somebody who can get official Roms from his provider should give this a try...
Hi all, not that i think myself insane but i have tried the USPL for my Elfin 128/256 Touch a few days ago . I have followed the steps and the screen turned white as mentioned by the installer after that it booted up fine again.
Everything seems to be working fine!
However, i have not seen any change to the device..
mb286 said:
Hi all, not that i think myself insane but i have tried the USPL for my Elfin 128/256 Touch a few days ago . I have followed the steps and the screen turned white as mentioned by the installer after that it booted up fine again.
Everything seems to be working fine!
However, i have not seen any change to the device..
Click to expand...
Click to collapse
You don't see any change in the device.... but if USPL works you can flash ANY rom from bootloader directly executing RomUpdateUyility, you don`t need to boot windows, activesync and white screen (temporary SuperCID) to flash, try.....
Go to RUU directory and execute RomUpdateUtlity instead of RUN.bat and see if you can flash any rom without 3% (corrupted) error....
I just start to explore my ATT Tilt....
1) I did flash kaiser-HardSPLv1
2) I did flash Dutty's TouchFlo Final Rom
3) I'm so happy that I did two above points and everything works perfect (except this - http://forum.xda-developers.com/showthread.php?t=369366 but anyway....)
Now I have got couple ( maybe stupid for pro people but not for me) questions :
1) I want to do SimUnlock do I have to do something else except this http://forum.xda-developers.com/showthread.php?t=361039 ???
2) If I want to flash Dutty's Official WM6.1 Rom do I have to flash kaiser-HardSPLv1 again ???
3) After I will flash Dutty's Official WM6.1 I know I will need to flash one of this Radios : 1.64.06.04 or 1.64.08.21 which one is better ??
4) Betwen Rom Flash and Radio Flash do I have to install something else ??
5) If for example I dont like this new Rom and I want to back to Rom which I have before what to do first ?? flash old Radio or old Rom ?? ( I don`t want to crash my phone);
6) After flash any Rom or any Radio to my phone do I have to do Hard Reset ??
7) Why ActiveSync is on my Taskbar after almost every Key Unlock and how to shut it off ??
8) Why some aplications run on by itself and the only way to shut it off is type "Close all" option from Taskbar ??
since i am in a good mood, i will try and answer ur questions
1) you can call at&t and have them give you the unlock code. That's what i did, even though the unlocker was already available. there's a thread dealing with this somewhere, with a phone number u should call.
2) no, u only need to do hardspl once
3) cant answer that, i'm still stuck with wm6
4) nope, just do one after the other. you can even have both done at once, but that's a whole different story for another day
5) both, old radio and rom, those radios are only compatible with wm6.1
6) nope
7) i dont know......did you set your sync schedule to "as items arrive"? maybe someone else can answer this.
8) that's cause we h4x0r3d ur phone......all your base are belong to us. but seriously though, u have to provide more info, i dont think we have any qualified psychic here on the forum.
wait a minute.......that was more than a couple!!
Thank you so much for your answer. I know it wasn't couple but several (??) - I explore my english also Never write on english forum before....
Hello there. So I have been reading on how to flash a Touch Pro 2.
The Version I have is the Unlocked T7373. Serial # HT96xxxxxxxxx
I have downloaded HardSPL from here - http://forum.xda-developers.com/showthread.php?t=550131
The ROM I intend to use is here - http://htcpedia.com/ruu_rhodium_s_htc_europe_wm65/soft/htc-rhodium-rom.html?page=1
My question is will this version of Hard SPL work with my phone. And after I flash it all I have to do is sync the phone with my desktop and run the rom update ?
I saw a guy brick his phone here so I dont want to do that. Thanks in advance.
powersupplyzzzz said:
Hello there. So I have been reading on how to flash a Touch Pro 2.
The Version I have is the Unlocked T7373. Serial # HT96xxxxxxxxx
I have downloaded HardSPL from here - http://forum.xda-developers.com/showthread.php?t=550131
The ROM I intend to use is here - http://htcpedia.com/ruu_rhodium_s_htc_europe_wm65/soft/htc-rhodium-rom.html?page=1
My question is will this version of Hard SPL work with my phone. And after I flash it all I have to do is sync the phone with my desktop and run the rom update ?
I saw a guy brick his phone here so I dont want to do that. Thanks in advance.
Click to expand...
Click to collapse
As long as your phone is GSM and not CDMA that is the Hardspl.
Just read and follow these steps and you will not brick your phone . mskip is the man when it comes to handholding noobs during their first flash. Just follow the steps and the links and happy flashing
http://forum.xda-developers.com/showthread.php?t=550540
Did the flash in 5 mins and worked
Much thanks for your advice man. The flash worked. Now my question is if i flash a wrong rom or cooked rom will it briick the phone. Can you give me a link to download a cooked rom? My phone is GSM. T7373. People post cooked roms but they dont post the exact version of the rom or for what phone it is for. Thanks again.
Once your phone is Hardspl'd it is near impossible to" brick it ".
Only flash roms from the rom development section in the Rhodium forum
http://forum.xda-developers.com/forumdisplay.php?f=490
All roms are posted in the phone forums they are meant for.
The Energy rom series is definitely the most popular, but twopumpchump is my favorite chef. Now that you are Hardspl'd try one or try them all until you decide for yourself which one you like best. Flash, live with it for a couple of days and then flash another. it will not hurt your phone. I have flashed mine hundreds of times.
I will try the Energy Rom
Will give it ago with the flavors you suggested. Thanks.
so i finally did it! i flashed my rom with RUU_Duttys_HD_WM6.5_Sense_2.1_Holy_Grail_R0
BUT when i turned the device on the colors were awful, it is slow and it is stucked all the time , sometimes even the "sense" doesn't want to start my CIM Card is not RECOGNIZED i did a soft reset and a hard one... nothing happens please please any ideas what shall i do now?
Do you have the proper hard spl for the rom? I don't own an hd, but do remember reading that you need an upgraded hard spl for newer roms. It sounds like you have a bad bootloader.
alexander42 said:
so i finally did it! i flashed my rom with RUU_Duttys_HD_WM6.5_Sense_2.1_Holy_Grail_R0
BUT when i turned the device on the colors were awful, it is slow and it is stucked all the time , sometimes even the "sense" doesn't want to start my CIM Card is not RECOGNIZED i did a soft reset and a hard one... nothing happens please please any ideas what shall i do now?
Click to expand...
Click to collapse
Yeah ted is right thats a classic sympton of someone using the wrong hspl/uspl, flash back to a stock rom, read the stickys in the HD rom development section, and upgrade your spl, then flash the rom again and everything should be working fine
ok so i used some different HSPL cuz i didnt find any other for the dutty's, so if i found a normal HSPL (Can you post a link for one sorry?) i shall flash it again ok thanks
alexander42 said:
ok so i used some different HSPL cuz i didnt find any other for the dutty's, so if i found a normal HSPL (Can you post a link for one sorry?) i shall flash it again ok thanks
Click to expand...
Click to collapse
The lastest spl for HD is 1.56 here it is, i assume you know what to do with it
Be careful and make sure it's the right one and you know what you're doing.
Flashing the wrong hard spl is the easiest way to brick a device.
another problem the phone doesn't even want to synch with my comp
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone
Good luck,
mancsoulja said:
The lastest spl for HD is 1.56 here it is, i assume you know what to do with it
Click to expand...
Click to collapse
Thanks It worked you are awesome!!!