Hi community!
I have an USB Bluetooth on my desk computer which has a permanent internet connection. I want to connect to internet with my XdaII and i want to use the computer's internet connection.(and also use bluetooth to sync my pda.) I tried the "connect via bluetooth" option in Activesync program on my pda but nothing happens although bluetooth is on and my computer is discoverable.
Does anybody know how to solve this problem?
Thank you for your time.
If you set your Activesync to stay connected after you sync, you should be able to use the internet through that connection.
I just tried it and I am getting 483k transfer speeds.
Thanks,
IceCream
http://www.geekzone.co.nz/content.asp?contentid=2417
http://www.geekzone.co.nz/content.asp?ContentId=3163
i tried 6 times, but it doesn't help, nothing happens if i press "connect via bluetooth"button.
thank you guys though.
did you follow the guide as in
add a com port as bluetooth on both the pc and on the pda
and bound with the pc checking out that you wanted to sync that way ?
thank you rudegar, i tried it 3 times again and on the third time it connected
thank you for your time.
i can connect to internet easily now.
Please anyone: I can't connect anymore to internet via activesync when my jamin (prophet) is connected to my laptop, and my laptop to the net.
In other words, any program requiring a net connection (internet explorer, weather channels, newsland...) would automatically launch GPRS connection instead of "using" the already present activesync-internet connection.
Hope I was clear enough, and thank you for any help.
you pick network connection in connection settings
Thanks, it works. Should have found it myself...
Does anyone know how to configure WM6 internet sharing using WIFI via USB to a laptop PC which does not have WIFI?
When I click on the internet sharing, my Qtek 9000 running WM6 always tries to do GPRS/3G connection, even if the WIFI is on and fully functional.
Is there anyway to change that?
Thank you in advance.
From what I understand is that is does exactly what you explain, it will share your device's GPRS/3G internet connection. But I dont think you can turn the Qtek into an accesspoint for laptops to connect to via WiFi or share an incomming WiFi signal.
Biffert,
Yes, you are correct. I want to turn my Qtek 9000 as a WIFI/GPRS/BlueTooth Access Point. Or simply view it as a WIFI/GPRS/BlueTooth internet access super USB dodge for my PC.
Thank you for your pointing out about current internet sharing limitation of WM6.
However, there are two issues about the WIFI can not be shared.
One is that I am often in a place where has no GPRS, only have WIFI.
The other is that there are many regular PDAs which have no GPRS, only have WIFI. When WM6 is available for those regular PDAs, many people will ask this internet sharing via WIFI question.
Thank you.
Hello,
I have done this just now and what you need to do on WM6 is just configure the gprs / 3g settings on your mobile phone and then go to start-programs-internetsharing. The jasjar should be connected via usb.
Set the pc connection to USB and select the nework connection you have previously configured from the list. hit the connect button and you are done
gluck
You could use the GPRS/3G internet sharing to connect your notebook to the internet, and share that connection (using ICS) from the notebook (set the wifi card to Ad-Hoc mode). I have never tried this though, so I'm 100% sure it will work
Thank you to all for your suggestions.
The limitation is that if there is not GPRS available, even though my Qtek is already connected to internet (WIFI), my PC is not able to access internet via USB using Qtek 9000 WM6 internet sharing.
I think that I need to describe the situation in detail.
I have a PC which can not access internet because it does not have WIFI, or BlueTooth, or GPRS. But it has a USB port.
I have a Qtek 9000 which can access internet by either WIFI, or GPRS, or BlueTooth. And my Qtek 9000 has WM6 internet sharing enabled.
What I want to do is to connect PC with Qtek 9000 via USB cable to let my PC to access internet using Qtek 9000 WM6 internet sharing.
Idealy, regardless how my Qtek 9000 is connected to internet (WIFI, GPRS, BlueTooth and etc.), my PC should be able to access internet via USB cable using Qtek 9000 WM6 internet sharing.
The current WM6 internet sharing is limited to that if Qtek 9000 is connected to GPRS internet, my PC is able to access internet via USB cable using Qtek 9000 WM6 internet sharing. If Qtek 9000 is connected to WIFI internet, WM6 internet sharing will not work.
I think this issue will be resolved sooner or later because when regular PDAs start to use WM6, many people will want to have WIFI WM6 internet sharing because regular PDAs do not have GPRS.
dchen4649 said:
Thank you to all for your suggestions.
The limitation is that if there is not GPRS available, even though my Qtek is already connected to internet (WIFI), my PC is not able to access internet via USB using Qtek 9000 WM6 internet sharing.
I think that I need to describe the situation in detail.
I have a PC which can not access internet because it does not have WIFI, or BlueTooth, or GPRS. But it has a USB port.
I have a Qtek 9000 which can access internet by either WIFI, or GPRS, or BlueTooth. And my Qtek 9000 has WM6 internet sharing enabled.
What I want to do is to connect PC with Qtek 9000 via USB cable to let my PC to access internet using Qtek 9000 WM6 internet sharing.
Idealy, regardless how my Qtek 9000 is connected to internet (WIFI, GPRS, BlueTooth and etc.), my PC should be able to access internet via USB cable using Qtek 9000 WM6 internet sharing.
The current WM6 internet sharing is limited to that if Qtek 9000 is connected to GPRS internet, my PC is able to access internet via USB cable using Qtek 9000 WM6 internet sharing. If Qtek 9000 is connected to WIFI internet, WM6 internet sharing will not work.
I think this issue will be resolved sooner or later because when regular PDAs start to use WM6, many people will want to have WIFI WM6 internet sharing because regular PDAs do not have GPRS.
Click to expand...
Click to collapse
Between PCs and regular PDAs, usually the internet connection sharing would go the other way around. Nearly all laptops these days come with a Wifi card and virtually all desktop or laptops come with Ethernet NICs. For this reason I think that perceived demand is low and this functionality was not envisioned when WM6 ICS was designed.
I think the easiest way would be to get a USB wifi adapter for your PC... You won't have to worry about battery life on the phone, etc.
Wondering how possible it is to do something slightly different. I have a UTStarcom PPC-6700 running one of the various AKU3.5s out there. The Internet Sharing feature is great, but the only options are to connect the PC via either USB or Bluetooth.
Now, what would be really slick, since the 6700 has integrated WiFi, would be to enable Internet Sharing over WiFi and effectively turn the 6700 into a WiFi access point. Anyone make any progress on this?
And... I'm new here, so please accept my apologies if I have asked something that has been already asked ad nauseum.
answerman said:
Wondering how possible it is to do something slightly different. I have a UTStarcom PPC-6700 running one of the various AKU3.5s out there. The Internet Sharing feature is great, but the only options are to connect the PC via either USB or Bluetooth.
Now, what would be really slick, since the 6700 has integrated WiFi, would be to enable Internet Sharing over WiFi and effectively turn the 6700 into a WiFi access point. Anyone make any progress on this?
And... I'm new here, so please accept my apologies if I have asked something that has been already asked ad nauseum.
Click to expand...
Click to collapse
Yes, sharing EVDO over WiFi instead of bluetooth and USB is already possible. Just click here to see how..
However, I have yet to see how to share WiFi over USB or Bluetooth... Let me know if this is posted anywhere...
can i share from uni in one time connection over wifi and bluetooth ? if yes...how do this ??
dchen4649 said:
I have a Qtek 9000 which can access internet by either WIFI, or GPRS, or BlueTooth. And my Qtek 9000 has WM6 internet sharing enabled.
What I want to do is to connect PC with Qtek 9000 via USB cable to let my PC to access internet using Qtek 9000 WM6 internet sharing.
Idealy, regardless how my Qtek 9000 is connected to internet (WIFI, GPRS, BlueTooth and etc.), my PC should be able to access internet via USB cable using Qtek 9000 WM6 internet sharing.
The current WM6 internet sharing is limited to that if Qtek 9000 is connected to GPRS internet, my PC is able to access internet via USB cable using Qtek 9000 WM6 internet sharing. If Qtek 9000 is connected to WIFI internet, WM6 internet sharing will not work.
I think this issue will be resolved sooner or later because when regular PDAs start to use WM6, many people will want to have WIFI WM6 internet sharing because regular PDAs do not have GPRS.
Click to expand...
Click to collapse
i have a very similar problem: my laptops built-in wifi-card can only handle WEP encryption, but not WPA !
so i would like to use my Neo as a "wifi-modem", connected to my laptop by usb-cable.
any news on this ?
tia
Joined the conversation a few years late! Anyway, this may be the answer to your question:
http://forum.xda-developers.com/showthread.php?t=377047
Hey guys ,
i tried to Connect my samsung I600 to internet over PAN connection with my pc.
Without any results.
I use the WIDCOMM Bluetooth software , but every time i try to connect to the "SGH-i600 network access point" he gives an error. Can't connect.
al others things work perfectly (wirless audio,...)
can somebody help me please ?
Thanks.
Tim
Hi there,
I've been looking for a solution of the following problem and I was wondering if anyone could help me:
You all know that ppc (windows mobile) connected via ActiveSync to a computer has direct access to the internet connected to that computer (some kind of pass-through connection). I would like my ppc to act as a Wifi hotspot sharing that ActiveSync Internet connection.
Most Wifi sharing software available assumes sharing GPRS/3G etc. connection established via cellular network. I would like to share internet connection established via USB/ActiveSync pass-through.
I'm not sure if I'm making myself clear.
Does anyone have an idea how to solve this?
Best regards.
Hi,
Did you manage to find a solution? I have the same requirement.
Thanks,
Paolo