Related
As some of you might have seen or even used, I have created an application that allows executing of shell scripts from within Android and it will even allow you to create a direct shortcut on your homescreen to a script ( for example to start Debian or reboot your phone ).
I know a lot of developers ( I also didnt at first ) don't look in the "applications and games" section, but i thought it was the best place to post the actual application.
I will keep updating that post with the actual application process/updates, but ive created this thread to see if people ( I think most of the actual linux experienced people are in this section ) would like to share their linux knowledge to other peoples uploading useful .sh files ( for backing up stuff etc etc ), so that less experienced can just load them in to my application, without risking all typos.
So if you have a nice script that is useful please upload it so we can all benefit from it.
The actual application can be found here:
http://forum.xda-developers.com/showthread.php?t=486486
Please dont ask question or place suggestions about the application in this thread, but use the one Ive created for the actual development and keep this thread for scripts only.
Regards,
Rob
I was thinking about starting a thread just like this one-- for everyone to post up their scripts. Don't know why I didn't. Anyway, I asked the question awhile back how to create a script for remounting the file system as read/write, which led to my discovery of GScript. In any case, here's what I was told to use:
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
Click to expand...
Click to collapse
Be advised that I have no idea if this actually works or not. Perhaps someone could test and post the results?
tubaking182 said:
that takes to long, i find it easier when i am using the comp to just click my terminal(which is almost always up and running) and type reboot_phone(i have a script on the computer that contains the comand adb shell reboot) and also another for rebooting into recovery and one more for bootloader
i guess i'm lazy but if i can find a way to automate anything i do in life i go ahead and do it. i have a script for nearly everything i do to my phone.
on a more on-topic note, i was hoping someone would post the command to reboot and apply an update.zip, i know it is in the JF autoupdater, but i just want to be able to hit a shortcut on my home screen to apply themes as well.
Click to expand...
Click to collapse
Code:
su
echo "boot-recovery
--update_package=/sdcard/update.zip" > /cache/recovery/command
reboot recovery
Untested, you might have to play around with the /sdcard/update.zip to get it to load properly, I'm not sure exactly how you put the path in there. This will, for sure, reboot it into recovery mode, and tries to automatically apply an update.zip.
Edit:
--update_package=sdcard:update.zip
Should do it. I hope.
Here's a script I built to make a rom into the "lite" version needed by many of the themes. It's not much but it's my first one.
Code:
mount -o rw,remount -t yaffs2, /dev/block/mtdblock /system
rm -r /system/media/audio/ringtones
rm -r /system/media/audio/notifications
reboot
Gary13579 said:
Code:
su
echo "boot-recovery
--update_package=/sdcard/update.zip" > /cache/recovery/command
reboot recovery
Untested, you might have to play around with the /sdcard/update.zip to get it to load properly, I'm not sure exactly how you put the path in there. This will, for sure, reboot it into recovery mode, and tries to automatically apply an update.zip.
Edit:
--update_package=sdcard:update.zip
Should do it. I hope.
Click to expand...
Click to collapse
You don't need the "su" at the beginning. Gscript has a checkbox to indicate if SU is needed and will add it on it's own. Putting it in causes the script to hang.
Anyway to make it close the script window when the script completes? Right now I have it doing an app backup and echoing DONE. But I'd like to automate the process if possible.
Exit doesn't seem to work.
Gary13579 said:
Code:
su
echo "boot-recovery
--update_package=/sdcard/update.zip" > /cache/recovery/command
reboot recovery
Untested, you might have to play around with the /sdcard/update.zip to get it to load properly, I'm not sure exactly how you put the path in there. This will, for sure, reboot it into recovery mode, and tries to automatically apply an update.zip.
Edit:
--update_package=sdcard:update.zip
Should do it. I hope.
Click to expand...
Click to collapse
It does reboot into recovery mode but I get the error "Can't mount /sdcard/Update.zip Installation aborted."
I'm able to just apply the update by pressing Alt+S but would be nice if it was all automated.
wpbcubsfan said:
It does reboot into recovery mode but I get the error "Can't mount /sdcard/Update.zip Installation aborted."
I'm able to just apply the update by pressing Alt+S but would be nice if it was all automated.
Click to expand...
Click to collapse
Same result for me.
Got it!!!
ok!
used this as script to change theme
cp /sdcard/themes/aero/update.zip /sdcard/
echo "boot-recovery
--update_package=SDCARD:update.zip" > /cache/recovery/command
reboot recovery
Needed to use caps for SDCARD!!!
found it poking around the recovery.c file
better still no need to copy over update.zip in root Just in case of emergency.
Code:
echo "boot-recovery
--update_package=SDCARD:themes/aero/update.zip" > /cache/recovery/command
reboot recovery
beagz said:
ok!
used this as script to change theme
cp /sdcard/themes/aero/update.zip /sdcard/
echo "boot-recovery
--update_package=SDCARD:update.zip" > /cache/recovery/command
reboot recovery
Needed to use caps for SDCARD!!!
found it poking around the recovery.c file
better still no need to copy over update.zip in root Just in case of emergency.
Code:
echo "boot-recovery
--update_package=SDCARD:themes/aero/update.zip" > /cache/recovery/command
reboot recovery
Click to expand...
Click to collapse
Dude, you rock! Thanks!
Clear Caches
I use this script to clear almost all of the app caches
Code:
#Deletes all caches in one fell swoop :]
#Locations of the caches were taken from various sites, including xda and androidcommunity.com
#written by indiekid97
#Deletes browser cache
rm -R /data/data/com.android.browser/cache/webviewCache
#Deletes Maps cache
rm -R /data/data/com.google.android.apps.maps/files
#Deletes StreetView
rm -R /data/data/com.google.android.street/cache
#Deletes Market cache
rm -R /data/data/com.android.vending/cache
#Deletes Tunewiki cache
rm -R /data/data/com.tunewiki.lyricplayer.android/cache/webviewCache
#Deletes Myspace cache
rm -R /data/data/com.myspace.android/files
#Deletes GMail cache
rm -R /data/data/com.google.android.gm/cache/webviewCache
Copy from /system/app
I get get the phone to copy from data app and private however, when I try to copy apps from /system/app it does nothing.
Mod_edit
any ideas?
I also tried to cd in the script to navigate to the data and still it only runs the first two copy commands.
removed copyright procedureYou can not display procedures concerning the two app folders being transferred to Fat32 portion of card.
a1t said:
I get get the phone to copy from data app and private however, when I try to copy apps from /system/app it does nothing.
Mod_edit
any ideas?
I also tried to cd in the script to navigate to the data and still it only runs the first two copy commands.
Click to expand...
Click to collapse
Woops
Sorry dudes. If we can still talk about any possibilities, I'm down. if not, oh well. now on eggshells
looking for script to move a specific directory on /system to a location on my sdcard
if anyone is interested PM me.
What would the script be to disable USB mounting to the computer? It's a hassle for me to have to un-plug the USB cable when I want to unmount, it would be very beneficial to have a quick press of an icon on the Home screen to do this
*Edit: after tinkering around with it for a bit, I see that this cannot be done- I tried mounting the SD card to computer and then running a script, *any* script will not load because GScript requires /sdcard/gscript_tmp.sh to be accessable in order to run a script.
Mounting to computer and then running a script from GScript simply shows an error:
Code:
Error:
/sdcard/gscript_tmp.sh
SO, in order for it to work, GScript would probably have to be configured to search for the script elsewhere to load while the SD card is mounted.
Here is a small script to back up current system sounds to the SD card, probably most useful if you do this prior to using the Make Lite script:
Code:
cp -r /system/media/audio /sdcard/audio
If there are any errors please let me know.
Once they're backed up, you can merge the folder into /sdcard/media for proper use with Ringdroid.
I'm not sure whether to use cp -r or cp -a, so I will stick with -r for now and see if anyone has any other suggestion.
quick question....
where can i find out what the "flags" mean.
-a
-t
and so on.
Mikey1022 said:
quick question....
where can i find out what the "flags" mean.
-a
-t
and so on.
Click to expand...
Click to collapse
I found this link useful to your question, might want to scroll down a bit to see the most direct answer to what you were wondering:
http://www.freeos.com/articles/4414/
Hope that helps
a start
http://www.computerhope.com/unix/ucp.htm
a1t said:
http://www.computerhope.com/unix/ucp.htm
Click to expand...
Click to collapse
Proxin said:
I found this link useful to your question, might want to scroll down a bit to see the most direct answer to what you were wondering:
http://www.freeos.com/articles/4414/
Hope that helps
Click to expand...
Click to collapse
Thank you to both of you
i have a problem, for some reason i cant go to recovery mode. i have JFv 1.42_RC33... what can i do
What exactly do you mean by that? Have you tried booting into recovery straight from the terminal?
Iceucold said:
Have you tried booting into recovery straight from the terminal?
Click to expand...
Click to collapse
That made even less sense.
forgive me if im mistaken, but doesnt it have something to do with the bootloader as well?
kydcleric said:
forgive me if im mistaken, but doesnt it have something to do with the bootloader as well?
Click to expand...
Click to collapse
i dont know im new to this stuff but what happens is that the g1 boot screen pops up when i press home+power then it just restarts and shows the g1 boot screen again then it goes to the normal home screen
Iceucold said:
What exactly do you mean by that? Have you tried booting into recovery straight from the terminal?
Click to expand...
Click to collapse
i dont know what u mean
Sorry about that. I was referring to going into the terminal emulator and typing in the command:
Code:
# reboot recovery
Iceucold said:
Sorry about that. I was referring to going into the terminal emulator and typing in the command:
Code:
# reboot recovery
Click to expand...
Click to collapse
nothing happens i put that in there and it just shows a money sign under it.. and when i just put reboot it says
reboot: operation not permitted
You are holding down home first right? I.e. press home and hold it down and then press power(I continue to hold home down all the way up until I see recovery mode starting)
Can you check if the recovery image (/system/recovery.img) is intact?
if you're using the haykuro builds, it is known that reboot won't work from terminal emulator. but you should be able to reboot recovery through adb shell.
I remember I read somewhere that certain bootloaders have a different key sequence for recovery mode, but i've never seem any of them.
ooooo crap i just checked it and there is no recovery.img in there ok what do i do??
someone plz help me out
probably best to dl the one from the Rooting Hacking & Flashing... post. They have a link to the file there. Just dl it and, as su, copy it to the folder they say.
what post???
Cosine said:
what post???
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=442480
yea but thats only to get to root and i already did that... and i just tried it and it dosent work
Cosine said:
yea but thats only to get to root and i already did that... and i just tried it and it dosent work
Click to expand...
Click to collapse
The suggestion was to try restoring the recovery image as outlined in that thread: (though you shouldn't need to do the "telnetd" part)
Instructions:
1. Download recovery.img and copy it to your SD card (see the previous instructions on how to copy from your computer to your Phone's SD card).
2. Download the Hard SPL and copy the zip file to the SD card.
3. All files must be on the root of your SD card.
4. Restart your phone. Wait for your phone to start up fully and show the home screen.
5. After your phone starts up, hit the enter key twice, type "telnetd" and press enter. (Yes, it will start up a contact search, don't worry. Just type it.)
6. Download an Android "Telnet" application from the Market and connect to localhost.
7. If you connect successfully, you will have a root prompt "#".
8. Type the following into Telnet (these commands will give you root access easier in the future):
* mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
* cd sdcard
* flash_image recovery recovery.img
* cat recovery.img > /system/recovery.img
Now you have root!
Click to expand...
Click to collapse
so should i just try
8. Type the following into Telnet (these commands will give you root access easier in the future):
* mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
* cd sdcard
* flash_image recovery recovery.img
* cat recovery.img > /system/recovery.img
in the terminal emulator
Just curious, what happens if I follow the rooting steps in the other thread but only do this:
adb push /directory_you_placed_asroot2/asroot2 /data/local/
adb shell
chmod 0755 /data/local/asroot2
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
At this point, what state is the phone in? Do I have full root access to the file system? What are the issues/concerns if I don't proceed with flashing the recovery image. Just trying to understand the process and what each step is for. I understand the part above but can't understand why you have to flash a recovery image and can't just use the phone after root is achieved.
Thanks in advance. FYI...all I want to do with root access is delete some system files, nothing more.
mobilehavoc said:
Just curious, what happens if I follow the rooting steps in the other thread but only do this:
adb push /directory_you_placed_asroot2/asroot2 /data/local/
adb shell
chmod 0755 /data/local/asroot2
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
At this point, what state is the phone in? Do I have full root access to the file system? What are the issues/concerns if I don't proceed with flashing the recovery image. Just trying to understand the process and what each step is for. I understand the part above but can't understand why you have to flash a recovery image and can't just use the phone after root is achieved.
Thanks in advance. FYI...all I want to do with root access is delete some system files, nothing more.
Click to expand...
Click to collapse
You don't have to flash the recovery image. I believe from that code you would have root and can run programs that require root. However, you would be unable to flash a new rom or any other update.zip (which means no auto apps2sd), partition your sd card easily or backup your phone in case something goes wrong. I suppose you are probably just asking for the sake of asking and knowledge but this is why a recovery image is HIGHLY recommended.
chuckhriczko said:
You don't have to flash the recovery image. I believe from that code you would have root and can run programs that require root. However, you would be unable to flash a new rom or any other update.zip (which means no auto apps2sd), partition your sd card easily or backup your phone in case something goes wrong. I suppose you are probably just asking for the sake of asking and knowledge but this is why a recovery image is HIGHLY recommended.
Click to expand...
Click to collapse
thanks. So if I don't flash the recovery image, I can't update to cooked ROMs or do the stuff you suggested but will the phone otherwise function normal? i.e. I can update to a Sprint/HTC update, I can factory reset the phone (assuming that'll kill root), etc.? I may do the whole process with the recovery image later but don't need it right now.
I only need to do this as a stopgap until Sprint/HTC releases an update.
mobilehavoc said:
thanks. So if I don't flash the recovery image, I can't update to cooked ROMs or do the stuff you suggested but will the phone otherwise function normal? i.e. I can update to a Sprint/HTC update, I can factory reset the phone (assuming that'll kill root), etc.? I may do the whole process with the recovery image later but don't need it right now.
I only need to do this as a stopgap until Sprint/HTC releases an update.
Click to expand...
Click to collapse
Well, I wouldnt recommend doing a sprint update either. That will cause you to lose root most likely. The only way then to keep root is wait until we get a dump of the update and then cook a rom that includes root, in which case you would need to flash the recovery image. Updates usually fix the exploits we use to gain root.
chuckhriczko said:
Well, I wouldnt recommend doing a sprint update either. That will cause you to lose root most likely. The only way then to keep root is wait until we get a dump of the update and then cook a rom that includes root, in which case you would need to flash the recovery image. Updates usually fix the exploits we use to gain root.
Click to expand...
Click to collapse
What he said...but yes, at the steps you quoted, mobilehavoc, you are capable of root access (you don't actually have it until you run that "su" command ). That allows you to read and modify otherwise locked away files and tweak to your hearts content!
Ive rooted and played around some but very little and followed everyones instructions very closely ( thank you for teaching a newbie ). Now how do I go back to original state that I backed up ( think I did ).
When I press the power and volume down button I get to the droid on skateboard, then I press the Home for recovery. I get the screen with all the options and I go to nandroid v2.2 restore and press trackball. It says restore latest backup press home to confirm. I do that and get the following error
Error : run 'nandroid-mobile.sh restore' via console.
What does this mean? Do i have to be tethered to PC and run this command from cmd prompt?
I am now lost again, any help is appreciated
Grinder16 said:
Ive rooted and played around some but very little and followed everyones instructions very closely ( thank you for teaching a newbie ). Now how do I go back to original state that I backed up ( think I did ).
When I press the power and volume down button I get to the droid on skateboard, then I press the Home for recovery. I get the screen with all the options and I go to nandroid v2.2 restore and press trackball. It says restore latest backup press home to confirm. I do that and get the following error
Error : run 'nandroid-mobile.sh restore' via console.
What does this mean? Do i have to be tethered to PC and run this command from cmd prompt?
I am now lost again, any help is appreciated
Click to expand...
Click to collapse
Just to confirm since it wasn't mentioned, you did a Nandroid backup earlier right? can you confirm that there's a folder on your sdcard called "nandroid"?
thecodemonk said:
Just to confirm since it wasn't mentioned, you did a Nandroid backup earlier right? can you confirm that there's a folder on your sdcard called "nandroid"?
Click to expand...
Click to collapse
Dont see that folder - I guess that is not good. Any ideas?
Grinder16 said:
Dont see that folder - I guess that is not good. Any ideas?
Click to expand...
Click to collapse
You must do a backup BEFORE you can do a restore..
To clarify for everyone, here's a breakdown of the steps:
adb push /directory_you_placed_asroot2/asroot2 /data/local/
This copies the asroot2 program to the /data/local folder on your phone.
adb shell
This logs you into the phone. From here on out, you are no longer executing Windows commands from a DOS shell - you are actually executing Linux commands on the phone.
chmod 0755 /data/local/asroot2
This changes the permissions on the asroot2 program so that it can be executed.
/data/local/asroot2 /system/bin/sh
This actually runs the root exploit and creates a file called /system/bin/sh that we will later turn into su.
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
This unmounts the /system partition and remounts it as writeable.
cd /system/bin
This puts you into the /system/bin folder.
cat sh > su
This creates the su program.
chmod 4755 su
This changes the persmissions on the su file to allow it to be executed.
theresthatguy said:
You must do a backup BEFORE you can do a restore..
Click to expand...
Click to collapse
I thought I had. What are the steps? I have a flash recovery image on my SD card. I have followed all instructions that I could find
Grinder16 said:
I thought I had. What are the steps? I have a flash recovery image on my SD card. I have followed all instructions that I could find
Click to expand...
Click to collapse
Boot to the recovery image then select "nandroid backup"
jonnythan said:
Boot to the recovery image then select "nandroid backup"
Click to expand...
Click to collapse
Can you provide those steps? Sorry but complete newbie here
"I get the screen with all the options and I go to nandroid v2.2 restore and press trackball. It says restore latest backup press home to confirm. I do that and get the following error"
Go there but select Backup instead of Restore.
Turn the phone off, hold the Home key, and turn it on. When you get to the screen with the green text select nandroid backup.
How to Flash a ROM Without an SD Card
This is for all those who don't have a working sdcard, sdcard slot, etc. but want still to flash a new rom
Prerequisites:
Flash an Amon_RA recovery if you're using Clockwork - I recommend Darch's unofficial (CDMA Hero refer to my signature if you need it)
Access to a computer that had AndroidSDK tools on it - you'll be using ADB
Put whichever ROM.zip you want to flash in your android-sdk\tools folder - I would rename it to something simple. (My example which I'll be using for this tut is: C:\AndroidSDK\toosl\ROM.zip)
Directions:
Reboot into the Amon_RA recovery
Wipe data/factory reset, cache, and dalvik via the recovery menu
Open up cmd/terminal on your computer
Navigate to your android-sdk\tools directory
Enter the following in cmd/terminal:
Code:
adb shell
mount data
*wait a second or two* You may or may not get the "/ #" line returned.
Despite what happens press "Ctrl+C" to break the command and get back to the standard AndroidSDK\tools> directory
Enter the following in cmd/terminal:
(replace "ROM.zip" with the name you're using)
Code:
adb push ./ROM.zip /data/
*this will take anywhere from 30sec to a min depending on the rom.zip size*
Then we do this in cmd:
Code:
adb shell
recovery --update_package=DATA:ROM.zip
Wait for it to finish flashing/updating
Reboot
ENJOY
Brief rundown of what we just did:
Wiped /data/ to free up space for the zip
Put our ROM.zip onto the /data/ partition since we don't have an SD Card to work with.
Told the recovery to flash from our /data/ partition instead of /sdcard/
I did some digging around the AmonRA github to look for the commands it actually performs while in recovery I figured out exactly how to do what I wanted.
(namely THIS PAGE for those of you who are interested in seeing the exact page I found them on)
Good knowledge man. Thanks for the guide
Root-Hack-Mod-Always™
I got excited when i read the title having lost my sdcard, unfortunately my lap top in Frys customers service n i never went back for it, bs they said it was water damage lol idiots are wrong so my guarantee didnt cover it,anyways i think most of us knew this method, thnkz anyways........WHAT I WANT TO KNOW IS HOW OR IF POSSIBLE TO CHANGE THE PATH TO THE STOCK BROWSER DOWNLOADS TO INTERNAL STORAGE????????????? PLS IF ANY1 KNOWZ LET ME KNOW
gotablunt said:
I got excited when i read the title having lost my sdcard, unfortunately my lap top in Frys customers service n i never went back for it, bs they said it was water damage lol idiots are wrong so my guarantee didnt cover it,anyways i think most of us knew this method, thnkz anyways........WHAT I WANT TO KNOW IS HOW OR IF POSSIBLE TO CHANGE THE PATH TO THE STOCK BROWSER DOWNLOADS TO INTERNAL STORAGE????????????? PLS IF ANY1 KNOWZ LET ME KNOW
Click to expand...
Click to collapse
/sigh. I'd try to help if I knew what this post was even about. All I got was something about a laptop at Frys.
Anyway, nice post OP.
gotablunt said:
I got excited when i read the title having lost my sdcard, unfortunately my lap top in Frys customers service n i never went back for it, bs they said it was water damage lol idiots are wrong so my guarantee didnt cover it,anyways i think most of us knew this method, thnkz anyways........WHAT I WANT TO KNOW IS HOW OR IF POSSIBLE TO CHANGE THE PATH TO THE STOCK BROWSER DOWNLOADS TO INTERNAL STORAGE????????????? PLS IF ANY1 KNOWZ LET ME KNOW
Click to expand...
Click to collapse
Fail. Put the blunt DOWN.
+1 OP
You first mentioned
kyouko said:
My example which I'll be using for this tut is: C:\AndroidSDK\toosl\kyoukoROM.zip
...
Code:
adb push ./kyoukoROM.zip /data/
Click to expand...
Click to collapse
But later, you use this:
Code:
adb shell
recovery --update_package=DATA:mau5.zip
Click to expand...
Click to collapse
I am confused on whether we use 'mau5.zip' as it is in the final command or change it to the name of our rom, which would be kyoukoROM.zip in your case?
HQRaja said:
You first mentioned
But later, you use this:
I am confused on whether we use 'mau5.zip' as it is in the final command or change it to the name of our rom, which would be kyoukoROM.zip in your case?
Click to expand...
Click to collapse
It would be the name of the file you are trying to flash.
How do you flash the recovery without an SD card tho?
EDIT: I figured it out. I will post my steps later.
Here is what I did:
Rooted phone
Attempted to push Flash_image - failed due to filesystem permissions
Steps for Flash_Image:
adb shell
su
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system/bin
chmod 777 /system/bin
exit/ctrl+c
adb shell
adb push flash_image.zip /system/bin/flash_image
adb shell chmod 0755 /system/bin/flash_image
Flashing Recovery:
adb push Recovery.img /system/bin/
adb shell
flash_image recovery /system/bin/Recovery.img
rm /system/bin/Recovery.img
reboot recovery
Then proceeded to follow the steps in this guide successfully
Stuke00 said:
Here is what I did:
Rooted phone
Attempted to push Flash_image - failed due to filesystem permissions
Steps for Flash_Image:
adb shell
su
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system/bin
chmod 777 /system/bin
exit/ctrl+c
adb shell
adb push flash_image.zip /system/bin/flash_image
adb shell chmod 0755 /system/bin/flash_image
Flashing Recovery:
adb push Recovery.img /system/bin/
adb shell
flash_image recovery /system/bin/Recovery.img
rm /system/bin/Recovery.img
reboot recovery
Then proceeded to follow the steps in this guide successfully
Click to expand...
Click to collapse
tip: use 'adb remount' instead of the manual mount commands. Do that before you adb shell. Just saves a bit of typing.
good work!
HQRaja said:
in the final command or change it to the name of our rom, which would be kyoukoROM.zip in your case?
Click to expand...
Click to collapse
I changed the OP to make it more consistent.
But see the quote below
sirmx said:
It would be the name of the file you are trying to flash.
Click to expand...
Click to collapse
Stuke00 said:
How do you flash the recovery without an SD card tho?
EDIT: I figured it out. I will post my steps later.
Click to expand...
Click to collapse
Good to hear you got it. I realized later that I should have mentioned how to flash it without an SD card
Cool! Favorited in case I ever need it. Really useful I would imagine!
sirmx said:
tip: use 'adb remount' instead of the manual mount commands. Do that before you adb shell. Just saves a bit of typing.
Click to expand...
Click to collapse
So would that be like this:
Code:
adb remount
adb shell
adb push flash_image.zip /system/bin/flash_image
adb shell chmod 0755 /system/bin/flash_image
Just confirming because I am about to feature this method on the blog I write for (with credit to Stuke00 and a link to his post) and don't wanna mess up. =)
EDIT: Forgot to mention that you rock! Thanks for the earlier help too.
EDIT 2: Nevermind, did some reading on what 'adb remount' does and found out it remounts /system with read+write access so I guess this is it. Though please do correct me if I am still wrong (which I am often).
Covered this method
Oh and in case you guys are interested in seeing my coverage of your methods, here it is...
The original method by kyouko: http://www.addictivetips.com/mobile/how-to-install-a-rom-to-an-android-phone-device-without-sd-card/
The recovery method by Stuke00: http://www.addictivetips.com/mobile/how-to-flash-a-recovery-to-an-android-device-without-sd-card/
Thank you guys, I can't do my work and earn my living without you. Keep it up! =)
EDIT: I'll have this last line as a part of my signature now.
Is this possible with Clockwork?
refthemc said:
Is this possible with Clockwork?
Click to expand...
Click to collapse
Dunno, I don't have plans for using it ever again nor have I looked at Clockwork's github - if there is one.
But it should be able to if you can find out what scripts/commands are run when you use the menu. If you want to you can check the github link I have in the OP to see where I found the commands that are run, and then look for something similar in clockwork's source.
You'd be looking for something similar to:
Code:
--update_package=root:path - verify install an OTA package file
Thanks for the awesome guide! Saves me a lot of trouble, I don't have to take out my sdcard or manually enable USB in recovery anymore!
for me
for me it did not work in data but it worked in cache
kyouko said:
Brief rundown of what we just did:
Wiped /data/ to free up space for the zip
Put our ROM.zip onto the /data/ partition since we don't have an SD Card to work with.
Told the recovery to flash from our /data/ partition instead of /sdcard/
Click to expand...
Click to collapse
Hi, I try to install a ROM from CACHE but I'm getting this in my command line:
recovery --update_package=CACHE:rom.zip
sh: /sbin/postrecoveryboot.sh: not found
Click to expand...
Click to collapse
And my phone do nothing, how many time it take to install? normally using sdcard took no more than 5 minutes but using ADB nothing happens. Any help?
reynierpm said:
Hi, I try to install a ROM from CACHE but I'm getting this in my command line:
And my phone do nothing, how many time it take to install? normally using sdcard took no more than 5 minutes but using ADB nothing happens. Any help?
Click to expand...
Click to collapse
what recovery are you using?
alt link: http://forums.androidcentral.com/sa...-guide-stock-2-3-6-replenish.html#post1651482
REVISED TUTORIAL IN ROOTING 2.3.6 SAMSUNG REPLENISH
warning for experienced adb users!: this was made with noobs in mind. you may learn something (from me! a noob! XD) but anyways, enjoy!
this does not affect anything on the phone except for adding the ability to access root permissions. CWM is not permanent, it disappears after you use it, and nothing on the phone is affected, as far as i know, but i had just factory reset the phone, so use at your own risk...
you may need to know:
root of a drive- drives are designated C:\ or D:\ or whatever letter in windows. Just go to "computer" and double click the first item. That location is the "root" of a drive.
Note: make sure you have at least 400 mb of memory (i know, thats alot, but just in case) on your sd card so you can back up your entire phone! i reccomend doing every optional step!!! It'll save you hassle if you have problems. If you can't make room for some reason, and you still wanna try, you should skip step 8. I don't suggest it though.
1. download "odin.zip" and "su" here: https://www.box.com/shared/620b03e95cc0814fefc8 and unzip to your desktop. if you dont have the android sdk, simply copy the "adb.exe" file from "odin.zip" to the root of your primary drive for later. Just go to "computer" and double click the top icon/item. It should say something about C:/. If you're on Mac, sorry. Idk much about it. As for Linux, I have no clue how you'd even try to do this. I love Linux but, sadly, can't experiment with this in it. WINE has its limits....... And I don't think adb or Odin would work.
2. download the "su" file and put into into "platform-tools" where you installed the android sdk, if you have it, or put onto the root of your primary drive if you havent.
3. start phone while holding "spacebar" and "p". "downloading..." should appear on the screen in yellow text
4. plug into the computer and run "Odin_Multi_Downloader_v4.42.exe"
5. select SPHM580.ops for "OPS" and Replenish-CWM5.tar for "One Package" (they should be the only options) DO NOT CHANGE ANYTHING ELSE!!!!!
6. hit "Start" and DO NOT REMOVE PHONE FROM USB.
7. as the phone reboots, hold "u" until CWM opens and set the phone down. you should close Odin now.
8. use the volume keys to navigate to the backup and restore option and use enter to select backup. wait for it to finish completely and take you back to the the CWM main UI. backing up here creates a pure recovery, untouched by anything. CWM is NOT installed into this recovery. continue with the guide.
9. open the command prompt (type cmd.exe in search or run in the start menu, depending on your version of windows) or use some form of terminal emulator on your operating system of choice. command prompt is preferred due to the fact i know it can get the job done, but do what you will.
10. navigate to the drive your sdk is on and into "platform-tools" or to the folder you put the adb.exe and su files on. the default should be [name of drive]:\Users\[username]\. use the "cd.." command til youre at the root of the drive, and if you installed the sdk, type "cd android-sdk-windows/platform-tools" or just go to the root of the drive and go to the next step if you havent. just be sure adb.exe and su are there.
11. type this in line for line, with enters in between. the blue "~#" in the later lines is the prompt you should have. do not type this. it will be in blue. (clockworkmod should still be open on your phone at this point)
adb shell
~#mount -o remount,rw -t rfs /dev/block/stl12 /system
~#exit
adb push su /system/bin/
adb shell
~#chmod 777 /system/bin/su
~#reboot
DO NOT CLOSE THE COMMAND PROMPT YET FOR THE SAKE OF CONVENIENCE
If you have problems with that, try using CWM to mount "/system". Some friendly people over at androidcentral pointed that out. I personally didn't have that problem, but I'm glad it's fixed.
12. when your phone has rebooted, go back to the open command prompt, which should be where it was before you typed "adb shell"
13. type "adb shell". you will see a prompt of "$." type "su." if you have a prompt of "#" rejoice! you have permanent root! now you can go on the Play Store and find "Superuser" and "Busybox" (they should be free. if you cant find it, get ahold of me and ill try to supply the newest updates) if not, and you have a backup from optional step 2, you should go through til you hit CWM and restore the backup. if not, make one now and reattempt everything aside from downloads and the moving the files around on your computer. Also, someone said something about "chmod 06755 /system/bin/su", so if you might try using that instead of "chmod 777 /system/bin/su". 777 worked for me, but maybe this works better for you.
OPTIONAL FINISH STEP: I dont know how you install CWM permanently, but you should do this so you can make backups of your rom and store them somewhere like on a box.com or mediafire.com account if you decide to mess with something on your phone. (use hjsplit to break it into pieces for uploading and reassemble after download for flashing if its too big). to use a recovery, enter CWM (either the way i have here or if you have permanently installed, just reboot and hold "u") and navigate to "backup and restore," "restore," and select the recovery you wish to use on your sd card (make sure when you take out a backup for storage, you zip up the entire folder with the name that contains the date and time of your backup.) it will overwrite everything on your phone to be exactly like it was when you backed it up.
good luck! have fun!
Note: if you rename the CWM backup file, make sure it DOESN'T HAVE A SPACE or it'll give you something about md5 or something not matching. If it says this, remove any spaces in the name and try again. I had it happen on my xperia play and freaked, thinking it was soft-bricked permanently one time, til I found out about cwm's glitch with that.
Also, I uploaded pretty much everything needed for rooting the phone, with comments pertaining to each file. This includes current (as of July 31, 2012) copies of Superuser.apk, a busybox installer, and the busybox and su binaries, as well the Odin package containing the tools to temp flash CWM.
the odin.zip file and the process of achieving CWM temp-flashing was found at http://forums.androidcentral.com/sa...method-samsung-replenish-android-2-3-6-a.html and credit for that part is given to joshua.worth, although I took it a different path than he did.
Update to above info: to simplify things, I uploaded all relevant files to box so people can get them easier. The su file went missing from xda, most importantly, so I fixed that, and added an updated binary in case someone has trouble with the other one.
contact me at [email protected] if you cant pm me.
Sorry if it takes a while to respond. Life's been kinda crazy for me lately, and I am using my new phone (no service) to do this over wifi.
ahh... well, turns out unrooting cannot be done with a CWM backup... you probably have to find a nandroid or a clean version of kernel with rom. the su file dissapears, although root is still there. ill keep playing with it, i have an idea why root stays although su disappears from the system files. anyways, i will still supply a backup thats pre-rooted for anyone who is willing to have a fresh start on their replenish. it will have superuser.apk preinstalled along with busybox, and everything else will be wiped. this will be a sprint backup, so if anyone has the boost version and is willing to back up with CWM and factory reset, then follow my guide, install busybox and superuser.apk, then back it up again, id be eternally grateful to have a copy
by the way, if anyone has problems with restoring a backup due to "md5" tags or whatever it is, make sure the name of the backup has no spaces. i was freaking out til i found that tip on an obscure forum (well, to me. i dont have a Motorola. lol. just a Sony Ericsson and 2 Samsungs)
update: sorry i havent uploaded the backup. i realized it would give whoever used it the number on this phone and i have to fix that. havent had time to anyways, plus it would only work on a sprint phone. it would convert any boost mobile to sprint, so thats a no-go. sorry...
does this work for the boost mobile replenish that is 2.3.6 if so how long does it take to odin
It should work. And Odin just flashes cwm (really fast) for the duration of the next boot cycle, which it automatically initiates, so hold the recovery button (I think it's u) as it goes into it and you'll have temp root. Make sure it's in download mode before you start. Remember, it cannot be unrooted, so if you value your warranty, plz think twice before doing it. I'm just here to supply the how-to if you decide to, not to say you have to. If you do, enjoy root access!
isavegas said:
It should work. And Odin just flashes cwm (really fast) for the duration of the next boot cycle, which it automatically initiates, so hold up (I think it's u) as it goes into it and you'll have temp root. Make sure it's in download mode before you start. Remember, it cannot be unrooted, so if you value your warranty, plz think twice before doing it. I'm just here to supply the how-to if you decide to, not to say you have to. If you do, enjoy root access!
Click to expand...
Click to collapse
Thanks. I did not know if there is a fail safe if something went wrong. so I was second guessing. Very simple to do thank you assuming with odin I made a back up. if I where to mess my system up I can use odin and restore my backup and I be back up and running again no need to sbf
i keep getting : ~ # mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
mount: mounting /dev/block/mtdblock3 on /system failed: Invalid argument
bscabl said:
i keep getting : ~ # mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
mount: mounting /dev/block/mtdblock3 on /system failed: Invalid argument
Click to expand...
Click to collapse
hmm... i am familiar with the error (ive gotten it with 3 different phones in my attempt to root it, but i have succeeded each time regardless) but are you sure you actually have clockworkmod OPEN on your phone when the error shows up? i cant actually do anything from my end, because i no longer have a computer i can use to test anything, or the replenish i rooted with the method... but i opened the cwm several times before thinking to test the adb and seeing the "~#". i actually restarted the phone and did it again before actually rooting it, seeing if i had rooted it or what, and tho i got the same prompt every time it was booted in cwm, it wouldnt show up if i allowed the phone to boot normally after using odin, i HAD to ACTUALLY boot into the cwm menu, which is completely seperate from the OS itself, although it has access to the system files.
by the way, copy and paste this directly into the command prompt when you get to the step to avoid human error. mount -t rfs -o remount,rw /dev/block/stl9 /system
or, if it wont work, try this mount -o remount,rw -t yaffs2 /dev/block/mtdblock4 /system
sorry bout the babbling XD. anyways, cwm should be circumnavigating the root permissions. hmm.... if you still have problems after that, try skipping to the adb push for the "su" file.
sorry i havent been on top of the thread. ill set up an email notification.
and by the way, something i found very useful on my xperia play when it went into infinite reboot, you can always just restore the system files in the advanced restore option, allowing you to keep all of your app data if, later down the line, your phone needs to be restored. hope this helps. it helped me XD thought id lose all of my messages, but nope. i decided to explore the advanced restore and yay! i got to keep them XD
UPDATE
I don't know if it matters to you anymore, but apparently, some people have trouble with this and fix it by going to the mount menu in CWM and mounting /system
Couple of corrections:
chmod 777 /system/bin/su
should be chmod 06755 /system/bin/su
and then following that command should be
ln -s /system/bin/su /system/xbin/su
and I saw someone say this is unrootable. Thats not correct. Simply running the unroot script would unroot. Doomlord made a nice one.
To use it do the following:
Code:
adb push unroot /data/local/
adb shell chmod 777 /data/local/unroot
adb shell su -c "/data/local/unroot"
adb reboot
[code]
The above will unroot almost any android device.
halfcab123 said:
Couple of corrections:
chmod 777 /system/bin/su
should be chmod 06755 /system/bin/su
and then following that command should be
ln -s /system/bin/su /system/xbin/su
and I saw someone say this is unrootable. Thats not correct. Simply running the unroot script would unroot. Doomlord made a nice one.
To use it do the following:
Code:
adb push unroot /data/local/
adb shell chmod 777 /data/local/unroot
adb shell su -c "/data/local/unroot"
adb reboot
[code]
The above will unroot almost any android device.[/QUOTE]
Unfortunately, Doomlord's method didn't work on it. I tried all manner of one clicks and manual versions and only this got even temporary root. It's a workaround based on forcing the phone to boot into a custom recovery. (I call it custom bc its not an "official" recovery.) And I chose the chmod by looking through many manual ways to root, and that one was popular, and it works. I had full root access afterwards. I tried to unroot afterwards, however, so I could take screenshots and stuff, but the su file would reappear, even after manual deletion or restoring to an unrooted backup. Anyways, point is, this is the only method I could get to work at all, and it does work.
But the "chmod" night help other people, so ill make note of it in the post just in case. Thanks for the info.
Sent from my rooted R800at using xda app-developers app
Click to expand...
Click to collapse
Important fix----
If step 11 doesn't work, go to the "mount" menu in cwm and mount /system. Some people on androidcentral were kind enough to mention that this fixed their problem with mounting /system as rewritable
Sent from my R800at using xda app-developers app
isavegas said:
Important fix----
If step 11 doesn't work, go to the "mount" menu in cwm and mount /system. Some people on androidcentral were kind enough to mention that this fixed their problem with mounting /system as rewritable
Sent from my R800at using xda app-developers app
Click to expand...
Click to collapse
thats because your command is wrong
shabbypenguin said:
thats because your command is wrong
Click to expand...
Click to collapse
How? Throughout my own rooting of one of the phones, I had this working perfectly. Every time I hit a snag, I found a way around it and documented it. A few other people had errors show up because the phone itself hadn't mounted the system, but the problem was resolved, and only a couple people had any other problems, and they were unrelated to that. I assure you, every command works properly, as far as I know.
exactly my point. your command to mount system is wrong.
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
lets break it down shall we?
mount - this is teh command
-o remount,rw - this is where you tell it what option you want, in this case remounting as rw.
-t yaffs2 - here you are telling mount that it should expect a yaffs2 formatted device, which is not what the samsung replenish is. the replenish uses RFS (robust file system), the best way i can describe it is like telling your windows computer that your hard drive is fat32 when its actually ntfs.
/dev/block/mtdblock3 - this is where you tell mount what you are looking to mount, the issue here is that the replenish doesnt use MTD blocks, it uses STL's and BML's.
/system here is where you are trying to mount the said device to..
out of 5 parts you did get 3 correct tho. you might wish to modify your guide to reflect the actual mount command, for your device it is the following:
mount -o remount,rw -t rfs /dev/block/stl12 /system
and that will kick out system as r/w
shabbypenguin said:
exactly my point. your command to mount system is wrong.
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
lets break it down shall we?
mount - this is teh command
-o remount,rw - this is where you tell it what option you want, in this case remounting as rw.
-t yaffs2 - here you are telling mount that it should expect a yaffs2 formatted device, which is not what the samsung replenish is. the replenish uses RFS (robust file system), the best way i can describe it is like telling your windows computer that your hard drive is fat32 when its actually ntfs.
/dev/block/mtdblock3 - this is where you tell mount what you are looking to mount, the issue here is that the replenish doesnt use MTD blocks, it uses STL's and BML's.
/system here is where you are trying to mount the said device to..
out of 5 parts you did get 3 correct tho. you might wish to modify your guide to reflect the actual mount command, for your device it is the following:
mount -o remount,rw -t rfs /dev/block/stl12 /system
and that will kick out system as r/w
Click to expand...
Click to collapse
Hmmmm.... Odd..... *shrugs* I had no problem with the command, but I guess other ppl had pickier computers or phones. Hell, Vista's buginess might have worked in my favor that time XD. Thanks for the pointer. I didn't really understand the exact way the replenish was built. I just found a lil guide for making it boot into cwm and found it allowed for me to use that as an exploit to root the device. In fact, I've done the same kind of stuff to root the samsung Intercept, except I made their own software flash a pre-rooted kernel. anyways, I'll update the guide on xda and androidcentral. Thanks!
isavegas said:
Hmmmm.... Odd..... *shrugs* I had no problem with the command, but I guess other ppl had pickier computers or phones. Hell, Vista's buginess might have worked in my favor that time XD. Thanks for the pointer. I didn't really understand the exact way the replenish was built. I just found a lil guide for making it boot into cwm and found it allowed for me to use that as an exploit to root the device. In fact, I've done the same kind of stuff to root the samsung Intercept, except I made their own software flash a pre-rooted kernel. anyways, I'll update the guide on xda and androidcentral. Thanks!
Click to expand...
Click to collapse
chances are you had system mounted in cwm without knowing it.
for future knowledge always check the devices fstab for where to mount and filesystem type
https://github.com/Shabbypenguin/android_device_replenish/blob/master/recovery/recovery.fstab
as you can see the proper mounts from the files i used to make CWM for the replenish
shabbypenguin said:
chances are you had system mounted in cwm without knowing it.
for future knowledge always check the devices fstab for where to mount and filesystem type
https://github.com/Shabbypenguin/android_device_replenish/blob/master/recovery/recovery.fstab
as you can see from the files i used to make CWM for the replenish the proper mounts
Click to expand...
Click to collapse
Eh, maybe. For all I know the first thing I did was mount everything with cwm. I DID do this several months ago. I don't even have the phone anymore. The owner of the phone was gonna give it to me after upgrading, but she sold it, so I kept her 500gb laptop hard drive instead. Popped it out of the external hdd casing and stuck it in a laptop. XD. It now has Linux on it.
Anyways, I've updated the guide to have the right command and note that if it doesn't work to use cwm to mount /system. And how do you find the fstab? Just Google it? Or is it somewhere on the device?
Btw, do you know anything about cwm? It refuses to properly back up my xperia play anymore. The .android_secure folder keeps giving it errors.
isavegas said:
Eh, maybe. For all I know the first thing I did was mount everything with cwm. I DID do this several months ago. I don't even have the phone anymore. The owner of the phone was gonna give it to me after upgrading, but she sold it, so I kept her 500gb laptop hard drive instead. Popped it out of the external hdd casing and stuck it in a laptop. XD. It now has Linux on it.
Anyways, I've updated the guide to have the right command and note that if it doesn't work to use cwm to mount /system. And how do you find the fstab? Just Google it? Or is it somewhere on the device?
Btw, do you know anything about cwm? It refuses to properly back up my xperia play anymore. The .android_secure folder keeps giving it errors.
Click to expand...
Click to collapse
its where the recovery is on the device. each device has their own fstab. as for your error sounds like a conflict, either with cwm itself or that folder
shabbypenguin said:
its where the recovery is on the device. each device has their own fstab. as for your error sounds like a conflict, either with cwm itself or that folder
Click to expand...
Click to collapse
It HAS to he cwm, because the folder is regarded as super hidden by the device. The folder itself can be seen, but the contents can ONLY be edited by the rom or a pc, and I haven't touched it with a pc before. It's where your apps go when you move them to the sd card. I've been trying to back my phone up with cwm because I wanted to test the jelly bean alpha release for it. its the xperia play 4g. Stupid backup crashes every time I try and it ends up eating up what room is left in my sdcard.
i followed your guide and have root in shell. however i cant get root permission on any apps, the window doesnt pop up asking me for permission. i also get a toast notification saying superuser access denied for whatever app im trying to open. any ideas?
arodey said:
i followed your guide and have root in shell. however i cant get root permission on any apps, the window doesnt pop up asking me for permission. i also get a toast notification saying superuser access denied for whatever app im trying to open. any ideas?
Click to expand...
Click to collapse
What does your Superuser log show?
Sent from my PC36100