Database Info

[ROM - 32B] ZeroXd 5.2r4 / JACHeroSki-v2.0 [09/11/2009 - 11:47AM EST]

I will be accepting donations if you like my work. After contacting HTC, they informed me that my device is not under warranty, as a technician determined it to be "user related" damage and that all repairs will be at owner expense.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8141983
If you follow my twitter, you know I bricked my G1. I am trying to get it repaired, but due to the long response time I had to buy a mytouch (no point having two G1s IF the other one gets repaired). Using this bad luck to my advantage, I scripted a way for hero to run on both with two simple commands.
How I rooted a brand new "perfected SPL" MT3G and installed Hero in 15 min:
http://forum.xda-developers.com/show...&postcount=154
Link to original thread: http://forum.xda-developers.com/showthread.php?p=4365404#post4365404
Updated, but still feeling slow? Back up. Try rm system/sd/app_s then reboot to recovery and wipe data. then install fresh. Before restoring your data, open the backup folder on your sd card and remove the subfolders for programs you no longer have or need to have backed up.
I noticed a 10% increase in speed and my phone was far from lagging to begin with.
Losing messages? Make sure that system/sd/app/com.android.mms.apk does NOT exist, as this was an old release. Go into settings for messaging (from the conversation list panel) and set priority to "High"
Most Recent:
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-6.0.zip
Now includes dynamic swap. Rewrote the method of apps to sd for myTouch.
Build will move system apps, user apps, and dalvik to sd on a g1 device.
Build will ONLY move user apps to the sd when using a myTouch.
This will allow the system apps and dalvik to remain on internal device.
This is a completely new method of doing a merge build so bear with me.
I am going to be rewriting things for users without a lot of user apps, like myself.
This will allow the entire build to be placed onto internal for mytouch users.
Once you have updated and are ready to use the phone, execute Terminal and enter the following commands:
su
magic
This configures the system to the specific device. This is until I finish automation.
LEDs have been restored to 93%
Bluetooth restored in MT3G
Porting my own boots for MT3G
Based on the System Image from Haykuro
Using the Kernel and Boot.img from JAC
Extensive system script edits were done
SwitchROM installs itself to system/sd/
LEDs are at about 90-100% brightness
CPU Optimization turned off by default
Enhanced Terminal included
Fixed My Account included
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-5.2r5.zip
http://twistedumbrella.slackdev.com/Resources.zip

twistedumbrella said:
MultiTouch for MT3G being patched NOW
Click to expand...
Click to collapse
Does that mean multitouch doesn't work and one more unanswered questio IS it from the latest release that modaco did, i asked it since 5.0 so please answer

White Rosie doesn't work i tried it but i doesn't show up and it doesn't even install shows parse error, can you do something about that. Really appreciate your work. Will donate as soon i finish with my exams, I came to US for a holiday for 3 months and as i came back i have exams, only 3 left, have to finish 6 books per subject (thats f*****ng 3 months syllabus) and i have exams after 2 day holidays , thats why i have been a bit inactive in the community, will be active on 24 and will provide a special version of HERO based on my favourite ZEROXD.

Installed JACHeroSki 2.0 and i get stuck on a boot loop. i've tried wiping and re-flashing and same thing.

mgorman said:
Installed JACHeroSki 2.0 and i get stuck on a boot loop. i've tried wiping and re-flashing and same thing.
Click to expand...
Click to collapse
For me 2.0 working fine,but cannot install ZeroXd-5.2r4-installation aborted:/
In v2.0 cannot run wifi:/somebody else?

Had to fix scripts. Check the link on original thread for download. They are the same files. The verification fail happens when your downloading as I upload. It was a last minute fix on the way to work. Sorry for the issues.

hey twisted...great work on the roms...
couple issues with me...
auto-rotate doesn't work...
auto correct and dictionary doesn't work also...
is there any way we can correct this?

tq745 said:
hey twisted...great work on the roms...
couple issues with me...
auto-rotate doesn't work...
auto correct and dictionary doesn't work also...
is there any way we can correct this?
Click to expand...
Click to collapse
What device are you using? MyTouch? Did you run the terminal command?
BTW, for everyone else: http://twistedumbrella.slackdev.com/user.conf
Did some testing, seems to run a little smoother

tq745 said:
hey twisted...great work on the roms...
couple issues with me...
auto-rotate doesn't work...
auto correct and dictionary doesn't work also...
is there any way we can correct this?
Click to expand...
Click to collapse
Thank you... h.nocturna for the fix, and nacron for the heads up...
Here is the fix for auto-complete... Worked for me on 5.1r2
Everything in
open dos prompt.
adb remount
(***back up the original***)
adb pull /system/sd/app_s/HTC_IME.apk c:\(*your directory*)\HTC_IME.apk
(***install the new one***)
adb push c:\(*your directory*)\HTC_IME.apk /system/sd/app_s/HTC_IME.apk
start your Messaging it will crash the first time you want to use the keyboard... restart Messaging and it should work...
HTC_IME.apk here: http://www.mediafire.com/?te0symyx4yz
Mms auto-rotate works for me in 5.1r2 so I dont know. But possibly you still have the old Mms.apk. Try pushing the new one from 5.0 or later rom...

Twisted are you using BFS in your new builds??? Post 5.1 that is....

twistedumbrella said:
What device are you using? MyTouch? Did you run the terminal command?
BTW, for everyone else: http://twistedumbrella.slackdev.com/user.conf
Did some testing, seems to run a little smoother
Click to expand...
Click to collapse
so i opened up better terminal and when i entered su it says
/system/xbin/su: not found
help?
in the meantime i'll try zambesey's way

twistedumbrella said:
What device are you using? MyTouch? Did you run the terminal command?
BTW, for everyone else: http://twistedumbrella.slackdev.com/user.conf
Did some testing, seems to run a little smoother
Click to expand...
Click to collapse
so i opened up better terminal and when i entered su it says
/system/xbin/su: not found
help?
in the meantime i'll try zambezy's way

same issue as above :-(

1.8 is running pretty awesome.
i guess its safe to assume that i shouldn't try 2.0 yet? lol

zeroxd 5.2r4 seems to be faster than jacs 2.0 but i cant get auto rotate to work or multitouch and when i try the commands in first post i get "/system/xbin/su: not found''

did you try running the commands via adb ?

im not familiar with doing it that way i dnt even know wat adb is

just connect your phone to the pc
install the drivers from android SDK
start > run > cmd
cd to the android tools directory
and adb shell
that's how i did with my phone and works perfectly

im not gona risk any damage ill deal without the rotate for a day till its fixed

tq745 said:
so i opened up better terminal and when i entered su it says
/system/xbin/su: not found
help?
in the meantime i'll try zambezy's way
Click to expand...
Click to collapse
should be under /system/bin not xbin

Mytouch 3g working talking gps nav

Copied the following onto my Android's SD card:
http://cid-3cf744d4c83401e6.skydrive.live.com/browse.aspx/.Public
build.prop
build.sapphire.prop
Maps.apk
Unplugged my phone and waited for it to prep the SD card
Fired up the application Terminal Emulator
Typed the following commands:
Code:
suYour phone may prompt you to allow or not allow this, allow it obviously, otherwise wait until you see a # before continuing to the next command
Code:
ashCode:
mount -o remount,rw /systemNext it's time to copy the build files into your system directory, but first you should backup the originals just in case.
Code:
cp /sdcard/build.prop /system
cp /sdcard/build.sapphire.prop /systemRemove the existing Google Maps app
Code:
cd /data/app
rm *Maps*
rm *maps*Code:
when i did this it siad it did not exist but i just keep going!!!
cd /data/dalvik-cache
rm *Maps*
rm *maps***END OF UPDATE**
All done with this part, time to reboot.
Code:
rebootGetting force close prompts for Google Voice? Yeah, go ahead and do the force close. Be sure to wait until your phone is done booting.
Now it's time to actually install the new app. So again, open up Terminal Emulator and type the following code:
Code:
suAgain, allow this command and/or wait until you see a # character
Code:
ash
mount -o remount,rw /system
install /sdcard/Maps.apk /system/app/At this point, I couldn't get things to work like the second post I linked earlier, so I'll did this command...
Code:
rebootGetting force close prompts for Google Voice again? Close the sucker and wait until your phone is fully booted.
Ok the app is installed and you may be thinking you're good to go, but you aren't. It's still not working for you like it wouldn't work for me. Do you have Google Voice installed before you did all this stuff? Most likely!
Go into your phone's settings and Manage Applications
Uninstall Google Voice
Fire up the Market and search for Google Voice
Install Google Voice
Reboot your phone (You can do this by holding the power button and select "reboot phone" or the long way through Terminal Emulator)
Run the Map app (now you may have your old address in there that you tried earlier, never fear. Just clear the map from the map menu)
Put in some directions like you normally would
You should see the option for "Navigate" after it gets the directions. Click it.
Accept the installation of the voice guide thingy
You're done! Revel in the awesomeness!
Get a beer and laugh at your friends with an iPhone
these is what i did exactley and it worked for me
I DONT NO HOW LONG THIS WILL WORK FOR!!!!!!

File to download
http://www.filefactory.com/dlf/f/a1a...apphireNav.zip

dskyers said:
http://www.filefactory.com/dlf/f/a1a...apphireNav.zip
Click to expand...
Click to collapse
Dead link .

This is maps from the droid dump? I tried using this on hero and wont work ill try again.

manup456 said:
This is maps from the droid dump? I tried using this on hero and wont work ill try again.
Click to expand...
Click to collapse
reading from earler i saw some post were it said it does not work on hero roms... i dunno why??? your the great manup maybe you can help us out with some of that great super xda knowlege you have buddy its crazy i feel like i have a brand new phone excited as hell and all its doing is telling me turn left and right lol

I am testing now to see if it works or what it needs to work maybe some libs that 1.6 has and 2.0 but hero does not so ill look into this.

These instructions need major work bro make no sense.

i've done EVERYTHING and when i did these steps..and i finally got it!!!

manup456 said:
These instructions need major work bro make no sense.
Click to expand...
Click to collapse
/Twerd.
-bZj

manup456 said:
I am testing now to see if it works or what it needs to work maybe some libs that 1.6 has and 2.0 but hero does not so ill look into this.
Click to expand...
Click to collapse
Manup,
The Maps 3.2 only works on 1.6+, unfortunately hero is 1.5

manup456 said:
I am testing now to see if it works or what it needs to work maybe some libs that 1.6 has and 2.0 but hero does not so ill look into this.
Click to expand...
Click to collapse
Wont work on stock hero ROMs, tattoo yes, but hero no

i dunno i thought my instructions were pretty good its what i did and got mines to work sry if it does not work for you but like i isad works for me

just a question
dskyers said:
i dunno i thought my instructions were pretty good its what i did and got mines to work sry if it does not work for you but like i isad works for me
Click to expand...
Click to collapse
has to be done this only for cyn or is suppose to work in other to , because i was able to work with cyn but not in other donut rom

[PORT] Droid 2 Multi-Touch Keyboard [Froyo] UPDATE! fixed4!

Got this working on a recent nightly for cm6 (dont see why it wouldnt work on any others too) also, it will most likely work on any deodexed rom (odexed im not sure) -- Let me know what does/doesnt work and ill try and do something or point you in the right direction.
this should also work with other phones (so far just hdpi phones)
EDIT: punk.kaos got it working on all phones! good work! thread here: http://forum.xda-developers.com/showthread.php?t=764021
You must be rooted for this to work!
THEMERS: These are the fixed .xml files that you will need to re-replace while theming: http://www.mediafire.com/?nhy8hd143hk81x0
BEFORE READING ANY MORE, GO DO A NANDROID!
/queue Jeopardy music
...
....
.....
......ok
Confirmed working on:
CM6 Nightlies/Tests (inc)
jdfroyo v1.9 (inc)
Skyraider 2.? (inc)
8/1 froyo leak (inc)
aiccucs 4.2 (inc)
redemption (inc)
CM6 (evo)
THIS HAS KNOWN ISSUES CAUSING THE HARDWARE KEYBOARD TO DO WEIRD STUFF ON THE DROID 1!!!!
something with the alt key not working correctly, i do not have a moto droid, so thats making it very tough to troubleshoot anything. anyone who does and wants to test some things, pm me, probably have some time this weekend to look at it
Bugless Beast 4 (moto droid)
Ultimate Droid Extreme Froyo 6.00 (moto droid?)
CM6 (nexus 1)
modaco r21 (nexus 1)
DeFrost 2.6a (desire)
BUGS:
- &amp on one of the keys, more of an annoyance than anything, will fix eventually fixed!
- crap, another &amp error, when holding the . key...fix coming eventually... fixed!
- < symbol fixed! <-- thanks for the help enragedpaza
- vibrates too lightly fixed! <-- thanks for the help enragedpaza
- others?
Voice input works too!
Back up your stock keyboard first:
Code:
adb shell cp /system/app/LatinIME.apk /system/app/LatinIME.apk.bak
adb shell cp /system/lib/libjni_latinime.so /system/lib/libjni_latinime.so.bak
FLASH (EASY) METHOD:
flash this from your recovery or from rom manager:
http://www.mediafire.com/?9yawjq9weakbl9y
Geo411m has made a black colored one. details here: http://forum.xda-developers.com/showpost.php?p=7684399&postcount=211
install the same as the easy way, otherwise download it and pull the apk out of it and install it with the manual method
ENJOY!
MANUAL (OLD) METHOD:
get both of these files:
apk:
fixed4: http://www.mediafire.com/?7q0406gqazq8rer
(harder vibrate, < symbol fix)
if you had an older version, be sure to switch to a different keyboard, then remove the old LatinIME.apk before pushing the new one over, otherwise you will get fc's like crazy!
lib:
(you may not need this, but it shouldnt hurt anything (backup instructions below) and if the keyboard doesnt work, then definitely try pushing it)
http://www.mediafire.com/?awy84cz5t8ngx49
some have reported that for some reason or another this file downloads as a .txt (although it comes as a .so for me all the time) make sure you rename it, if need be, to libjni_latinime.so before going any further
you will need adb for this method (others have done it without a computer)
youll either want to be in recovery, with /system mounted, or remount it read-only while the phone is up (need s-off for this, thanks unrevoked!)
then push the two downloaded files to your phone: (in some roms it is called GoogleLatinIme.apk, so use that instead of LatinIME.apk if thats how your rom is)
Code:
adb push d2keyboard-signed-fixed4.apk /system/app/LatinIME.apk
adb push libjni_latinime.so /system/lib/libjni_latinime.so
choose your input method like always, and enjoy the multi-touch keyboard on froyo
ok, the screenshots really dont mean much, anyone can use gimp, but w/e thought id put them up there anyway
thanks to LegionTHEFecalExcretion for the system dump!
if you like what i do and feel compelled to donate something to me, do so here

Great thanks

Working on Skyraider 2.
" & " button showing in bold " &amp " Otherwise good.

-Michael_ said:
Working on Skyraider 2.
" & " button showing in bold " &amp " Otherwise good.
Click to expand...
Click to collapse
yea i noticed that, its going to have to wait for a bit before i go in and fix it, otherwise if someone else wants to, by all means

Works on BB v.4 for the Droid and this is sick!! Thanks so much.

Can you just install the app like you normally would?
And what's the second file for?
Thanks.

palomosan said:
Can you just install the app like you normally would?
Click to expand...
Click to collapse
try it, report results
palomosan said:
And what's the second file for?
Click to expand...
Click to collapse
force closed on me without it

it works on jdfroyo rc1 with no problems without the lib file.....now i can actually type w/o all my typos.

jdkoreclipse said:
it works on jdfroyo rc1 with no problems without the lib file.....now i can actually type w/o all my typos.
Click to expand...
Click to collapse
hmm, yea i guess it is working without the lib file...

invisiblek said:
try it, report results
force closed on me without it
Click to expand...
Click to collapse
You were right, install the app but it kept force closing. Thanks. I'm using Skyraider 2.2

I can't tell you how excited I was when I pushed this on my phone, not because of how it is a much better keyboard then the stock one. I was excited because I was able to push this system without having to be in recovery. UnrEVOked is amazing!
BTW.. I am having no issues with this so far. Excellent keyboard, good port!

tcberg2010 said:
I can't tell you how excited I was when I pushed this on my phone, not because of how it is a much better keyboard then the stock one. I was excited because I was able to push this system without having to be in recovery. UnrEVOked is amazing!
BTW.. I am having no issues with this so far. Excellent keyboard, good port!
Click to expand...
Click to collapse
i cant tell you how excited i was when the keyboard finally popped up on my screen!
thanks for the feedback

i'm running sapphire 1.0 and i was able to install with Root explorer.

Works on skyraider 2.2 - no pc required. I did have to copy over the lib file with root explorer. Btw I am typing on this keyboard now and it is amazing at correcting mistakes!
Sent from my ADR6300 using Tapatalk

I can't push the .so file to my phone, the keyboard fc's on me when I try to select it in the input method section, so I thought i would try pushing the lib, but it keeps saying the directory doesn't exist.
this is exactly what i type
adb push libjni_latinime.so /system/lib/libjni_latinime.so
cannot stat: 'libjni_latinime.so' no such file or directory

It downloaded for me as a. Txt extension. I had to change it to .so - check to see if that happened to you
Sent from my ADR6300 using Tapatalk

dude0909 said:
I can't push the .so file to my phone, the keyboard fc's on me when I try to select it in the input method section, so I thought i would try pushing the lib, but it keeps saying the directory doesn't exist.
this is exactly what i type
adb push libjni_latinime.so /system/lib/libjni_latinime.so
cannot stat: 'libjni_latinime.so' no such file or directory
Click to expand...
Click to collapse
its saying the .so doesnt exist
is it located in the directory your command prompt is in? otherwise it wont be able to find it

AMAZING work!! Thank you sir!

djkms said:
It downloaded for me as a. Txt extension. I had to change it to .so - check to see if that happened to you
Sent from my ADR6300 using Tapatalk
Click to expand...
Click to collapse
now thats weird, op updated for this

invisiblek said:
its saying the .so doesnt exist
is it located in the directory your command prompt is in? otherwise it wont be able to find it
Click to expand...
Click to collapse
Oh i thought it was supposed to be in the root of my sd card just like the apk.

[FIX][CURE] Stagefright work around. Cures Hulu demon voices! Now with working zip!!!

THERE IS A NEW FLASH PLAYER ON THE MARKET I WOULD RECOMMEND NOT UPDATING UNLESS YOU REALLY WANNA RISK LOSING HULU
-----------------------------------------------------------------------------------------------------------------------------------------------
These fixes are no the actual hulu app or even a change to the hulu app at all. It is a fix which roles back the version of stagefright which just so happens to be the fix for the demon voices.
This may negativity effect Youtube, Pandora, and xm radio.
I MADE AN UPDATE ZIP THAT
I HAVE CONFIRMED WORKING BY donnyevo4g and several others
I have tested it myself
So try it out I need feedback!!
Make a Backup first just flash and your done. (The zip is called Hulufix.zip)
This zip roles back stagefright and fixes demon voices.
****IF THIS WORKS DISREGARD ALL BELOW****
*****MAKE A NANDROID BACK UP BEFORE ANY OF THIS*****
Here are basic instructions for using adb. Thank you rutter9 for the files and how he did it.
1. Unzip the contents into your android-sdk tools folder
2. adb reboot recovery
3. In recovery go to partitions and select mount\system
4. adb remount
5. Than use these adb commands
Code:
adb push libstagefrighthw.so /system/lib/libstagefrighthw.so
adb push libstagefright_omx.so /system/lib/libstagefright_omx.so
adb push libstagefright_color_conversion.so /system/lib/libstagefright_color_conversion.so
adb push libstagefright_avc_common.so /system/lib/libstagefright_avc_common.so
adb push libstagefright_amrnb_common.so /system/lib/libstagefright_amrnb_common.so
adb push libstagefright.so /system/lib/libstagefright.so
6. In partitions menu unmount/system
7. adb reboot
------------------------------------------------------------------------------------------------
The other way for those who don't like or use clockwork recovery. This time i'm giving thanks to JTNiggle (who has done a lot on this thread thanks )
Okay, i'll give this my best shot here, not my fault if your phone burns down your house. As always, nandroid before, during, after and in between.
First, download the attachments from this post. Unzip Hulu Working Stagefright.zip and place it's contents in your sdk tools folder. Also place Hulu.apk and flash-fixed.apk in the sdk tools folder.
Part 1 (If you don't already have hulu app with flash fix)
On ur phone, open Root Explorer, (or whatever file manager you use but Root Explorer is the best) and navigate to /system/app, make sure you have full permissions set and mounted as r/w. Find all the flash apk's, some ROM's have two, some have one. Their actual names vary, so look thoroughly. Just rename them to something like flash.apk.old, this way you can rename them back if something goes wrong.
Now, still in Root Explorer, navigate to /system/lib, make sure you have full permissions set and mounted as r/w. After that, close the explorer and plug your phone into your pc.
Open up a command promt and navigate to your sdk tools folder where you placed the downloaded files.
Run these commands, one at a time, tapping enter after each one.
Code:
adb push flash-fixed.apk /system/app/
adb push Hulu.apk /system/app/
Now, on your phone, go back into Root Explorer, and navigate to /system/app, find the apk's you just pushed. Tap each one and pick install, follow prompts from there to finish the install. Close the explorer when finished.
If you want, at this point, you can try and open up Hulu on your phone, and see how it's running. The video should start playing fine, but you'll have the demon voices, no biggie, we'll fix that in a minute. If the video wont play at all, and you get a message like, not optimized for your device, or not supported on your platform, then Flash did not install properly. Check everything and re-do the above steps until you get video playback on Hulu. I've had to run through it twice to get it to work sometimes.
Part 2 Once you have hulu and you want to fix demon voices
Now, back to the command promt from your sdk tools folder. Run these commands one at a time, tapping enter after each one.
Code:
adb push libstagefright.so /system/lib/
adb push libstagefright_amrnb_common.so /system/lib/
adb push libstagefright_avc_common.so /system/lib/
adb push libstagefright_color_conversion.so /system/lib/
adb push libstagefright_omx.so /system/lib/
adb push libstagefrighthw.so /system/lib/
Now that all the files are in the proper places, you can reboot, so run
Code:
adb reboot
once your phone boots up, it should be good to go. If not,
This may provide mix results. This is a temporary fix
Good Luck

Confirmed working or not working
****THIS IS WITHOUT ANY MODIFICATIONS TO Stagefrght****
Fresh 3.2 NOT WORKING
AVA'S V7 NOT WORKING
CM 6 Final NOT WORKING
Stock pre 3.28 WORKING (only with stock kernel)
Evio 1.2 NOT WORKING
Evio 1.2beta WORKING
Evio 1.1 WORKING
Burnt droid 1.1 WORKING (with 4.1.9.1 netarchy kernel)
Confirmed working after JTNiggle fix
AVA's V7 (with stock kernel and KiNgxKernel #8 #9)
Burnt Droid 1.1
OMJ 3.1
Fresh 3.2
Confirmed working with My fix .zip
Ava's V7

to help/add to list:
fresh 3.2 and final_flash.apk NOT WORKING properly. (audio studder)

Cm6 final + hulu doesn't work either...it has the demon voice and audio is out of sync
Sent from my Htc Evo 4g

I think its more of a kernel issue than a Rom issue. I know it worked on the stock pre 3.28 ota Rom. No luck with the updated stock kernel.....

Now that I find interesting.
Could I see your build props from before and after flashing a custom kernel
Sent from Evo via mysterious entity

Stalte said:
Now that I find interesting.
Could I see your build props from before and after flashing a custom kernel
Sent from Evo via mysterious entity
Click to expand...
Click to collapse
I don't have the before. Deleted. I know it also worked with the stock Rom running kings #6 BFS318-2.6.32.15. I think you'll find all the new roms people are reporting it not working with are using the updated kernel.

Evio 1.2 not working

Working fine with evio 1.2 with bfs #8. Voices fine. Video smooth at 1228mhz.
Edit: that was 1.2beta before the build was changed. Also had it working no problem on evio 1.1.
Sent from my PC36100 using XDA App

burnt droid 1.1
4.1.9.1 netarchy kernel
runs smooth no problems
Also, I believe the actual hulu app has nothing to do with this. Isn't is just a glorified browser to the hulu mobile widget?

I read on flipz site that he attributes it to the new stagefright .....

GadgetMonger said:
I read on flipz site that he attributes it to the new stagefright included in the new kernel.....
Click to expand...
Click to collapse
That's exactly what it is. The problem was already solved by downgrading it. Not really sure what there is to fix in the hulu "app"

rutter9 said:
That's exactly what it is. The problem was already solved by downgrading it. Not really sure what there is to fix in the hulu "app"
Click to expand...
Click to collapse
Question. Can you rollback stagefright without downgrading the kernel? Or is stagefright a component of the new kernel? Hulu working on the new kernel is what I was hoping for....

GadgetMonger said:
Question. Can you rollback stagefright without downgrading the kernel? Or is stagefright a component of the new kernel?
Click to expand...
Click to collapse
Well you can try this. Here are my library files for stagefright. Mount system/lib as r/w through adb. Pull your stagefright lib files (as a backup) then overwrite with the working ones. Then reboot in adb. Worth a shot.

GadgetMonger said:
Question. Can you rollback stagefright without downgrading the kernel? Or is stagefright a component of the new kernel? Hulu working on the new kernel is what I was hoping for....
Click to expand...
Click to collapse
Thats what im trying to fix or at least disable parts of stagefright to make it work
rutter9 said:
Well you can try this. Here are my library files for stagefright. Mount system/lib as r/w through adb. Pull your stagefright lib files (as a backup) then overwrite with the working ones. Then reboot in adb. Worth a shot.
Click to expand...
Click to collapse
I'm in class right now but could someone try this and let me know if it works?

Stalte said:
Thats what im trying to fix or at least disable parts of stagefright to make it work
I'm in class right now but could someone try this and let me know if it works?
Click to expand...
Click to collapse
Right but it has nothing to do with the hulu app. You just need to patch stagefright.

rutter9 said:
Right but it has nothing to do with the hulu app. You just need to patch stagefright.
Click to expand...
Click to collapse
I agree now if I knew how to change the title of the post I would change it to "working on a way to fix stagefright in new kernels and roms"

Stalte said:
Thats what im trying to fix or at least disable parts of stagefright to make it work
I'm in class right now but could someone try this and let me know if it works?
Click to expand...
Click to collapse
Give me a minute... I'll see what I can do.

Stalte said:
Thats what im trying to fix or at least disable parts of stagefright to make it work
I'm in class right now but could someone try this and let me know if it works?
Click to expand...
Click to collapse
I tried to roll back stagefright last night, wouldn't boot up, frozen then looped. But that was flashing the update patch zip. I'll try it manually later today.
This is on Ava v7 with the new HTC kernel.

rutter9 said:
Well you can try this. Here are my library files for stagefright. Mount system/lib as r/w through adb. Pull your stagefright lib files (as a backup) then overwrite with the working ones. Then reboot in adb. Worth a shot.
Click to expand...
Click to collapse
Nope. Froze up at the white HTC screen on boot.

Lg Optimus V development thread

Hopefully we get an lg optimus v section. But here goes something for starters.
These different posts will contain everything you need for now (i hope who am I kidding) Any ways here is my latest deodexed rom.
Features:
Completly de-odexed
new bootanimation
no virgin mobile apps
custom bootimage
new keylayout ( camera button opens the camera not focus, side voice control is power button, changed all the buttons to stop unlocking the screen except for the menu button)
Stagefright enabled
I'm preparing some final things but I wanted to get this going.
Download here

How to root the lg optimus v use one click root more coming soon

How to get into diag mode coming soon

How to install a custom recovery more coming soon
download here

Stock Rom with su and custom bootimage only
Download here

How to remove apps using adb
To me the best and free way to remove apps from your phone is via adb. Hopefully you have some familiarity with adb if not you should be good after reading this.
First open a command prompt and type
Code:
adb remount
this will allow you to do what we need to do if you have errors then you need flash one of the roms I provided.
then type
Code:
adb shell
cd /system/app
ls
this opens adb shell commands then opens the system directory and shows you whats in it. If you are using the deodexed rom you will have nothing but .apk files in there. But if you use the stock rom then you will have .apk and .odex files in there.
look through there and figure out what apks you want to delete and then type
Code:
rm whatever.*
replace whatever with the app you want to remove
for instance
Code:
rm googlevoice.*
then type
Code:
cd ..
cd ..
cd /data/data
pm uninstall com.googlevoice
this part here changes your directory to data/data and then it completes the uninstall. You may have to guess what the name is in data/data but usually it isn't that hard. Also you can't pm uninstall apps from data/data unless they have been removed from /system/app so don't be worried about removing the wrong thing.
check your phone and you should be good to go

I'm going to get one this week. Thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaanks!

Are there any ROM & kernel pack with ext4 support?

r0bot said:
Are there any ROM & kernel pack with ext4 support?
Click to expand...
Click to collapse
Xiona is what I use

Xiona works really good, there are some forums with a stock VM rom with Xiona in it.

teki9 said:
Xiona is what I use
Click to expand...
Click to collapse
So Xiona has ext4 support?

Emergenscene said:
Xiona works really good, there are some forums with a stock VM rom with Xiona in it.
Click to expand...
Click to collapse
What ROMs support ext4 also?

not to bring up a dead threaad....but the optimus v really needs a home here at xda.
i just rooted my first. i tried to use a windows program called "romtools" found on the interwebz. this didnt work, though. so...after a little more searching...i found this out. maybe the opt can put this up in first post?
easiest way to root and install super user: run super one click root to obtain adb shell root. then...run z4root. neither of these two methods work on their own but if you do in that order...you will have root and super user installed. from there, you can flash a recovery using android terminal emulator...if your old school like that. i did.
after that you can flash the stock virgin with Xionia kernel and bloatware removed. get setcpu..overclock it. whatever. door is open.
hope this helps! trying to get some thank you points on the board.

back again to try to keep this thread a little bit up to date til SOME1 NOTICES THAT THIS PHONE EXISTS.
for those having the "Cell standby" battery bug....
whats that? go to setting>about phone > battery usage> if cell standby is at anywhere near 50% or over...you have this bug. antenna constantly scans even with a connection...
plugg phone into charger. toggle airplane mode. unplugg. this will clear your battery stats and will properly connect you. check your setting to see if your usage goes down.
there also seems to be a problem wil gallery. the app opens but displays nothing. no albums or anythinng. its like it cant read the sdcard. only thing i can say to do is install a 3rd party pic viewer and trash 3d gallery.
hope this helps you guys.

Awesome, thanks for this. I currently have CM7 on my Optimus V, but for some reason I can't use any adb commands with it. I can with this. Sorry if this is the wrong place to post it, but I'm still a new member. Anyone know a way to get adb working?

hey did you guys ever figure out diag mode for the Optimus V? its not like the the other Optimus devices and ive tried every key combo my little brain could come up with....im trying 2 connect it 2 QPST or CDMA..