Up front details:
Verizon's version of HTC Touch Pro (XV6850)
Verizon stock ROM MR1 (2009-06-11)
Connects to Sony MEX-BT5000 head unit for hands-free and A2DP
I recently installed iGuidance 2009 on my TP, mainly because it has text-to-speech directions (as compared to Google Maps, which doesn't). It works great, except for one detail. When connected to the head unit in my truck, the audio for "In 500ft, turn right on" is played through the truck speakers, but when the name of the street is said, that audio is played through the TP speaker. Any ideas why this happens and/or how to make all of the iGuidance audio play through the stereo?
-=Zzedly=-
Just to close the loop on this question, the issue seemed to have fixed itself. In my case, I think the issue was which was first: the iGuidance program running or the A2DP being connected. I think the A2DP has to be connected first before iGuidance's TTS will work fine.
-=Zzedly=-
Related
I am looking for a quick and easy way to integrate my trinity with my car.
Currently I have have a generic car mount with charger. However, I find that TomTom and telephone calls over the speakers are too quiet.
I was thinking of installing a Parrot MK6000 in my car as a method to stream audio from my trinity to the car stereo whilst also acting as a car kit for hands free use while driving. Has anybody had any experience with wiring up this kit? is it easy for a moderate level electronics users (able to solder wires proficiently etc.) to wire up?
Alternatively does anybody know of other solutions to integrate the trinity with the car stereo?
Hello:
I installed this hands free in my car, and it works really fine as a hands free. The audio streaming works well too, but the sound is quite methalic. With tomtom, there is a delay in the sound, the first word it says, for example "...Turn on the left in...." you listen "...urn on the left in ..." and it hanpens allways when tomtom starts to talk.
My OS version is wm5 and I read that wm6 solves this problem.
I recently bought a LG LAC7700R (carstereo with bluetooth and cd/mp3/wma player, with a seperate mic you can place somewhere in your car) works good, up to 5 phones can connect, last six called contacts it will remember. no phonebook in carstereo. Carstereo mutes automaticly by incoming call. You can even use BT audiostream.
i have always BT on, on my phone, it will connect by itself with the carstereo.
works fine for me.
now i am looking for a nice phoneholder with only a charger.
stormyb said:
I recently bought a LG LAC7700R (carstereo with bluetooth and cd/mp3/wma player, with a seperate mic you can place somewhere in your car) works good, up to 5 phones can connect, last six called contacts it will remember. no phonebook in carstereo. Carstereo mutes automaticly by incoming call. You can even use BT audiostream.
i have always BT on, on my phone, it will connect by itself with the carstereo.
works fine for me.
now i am looking for a nice phoneholder with only a charger.
Click to expand...
Click to collapse
I have a similar setup, with the Sony MEX-BT2500 instead.
However I did not manage to route the Tomtom or iGO sound over the BT A2DP stream.
As a charging holder I have the Brodit Cradle installed.
esackbauer said:
I have a similar setup, with the Sony MEX-BT2500 instead.
However I did not manage to route the Tomtom or iGO sound over the BT A2DP stream.
As a charging holder I have the Brodit Cradle installed.
Click to expand...
Click to collapse
check this, maybe it will help:
goto bt settings in your phone and activate bluetooth stereo on. that's the thing for play mp3's and navigationvoices over BT. The handsfree mode is for phone voice. (leave that on!)
does sony support a2dp ? maybe that's the problem.
stormyb said:
check this, maybe it will help:
goto bt settings in your phone and activate bluetooth stereo on. that's the thing for play mp3's and navigationvoices over BT. The handsfree mode is for phone voice. (leave that on!)
does sony support a2dp ? maybe that's the problem.
Click to expand...
Click to collapse
Actually I bought the Sony because it supports A2DP. And with MortPlayer it works flawless when listening music. With activated Bluetooth Stereo (Headphone Symbol in top bar) Tomtom still uses the internal speaker.
Hey All,
I have a Diamond, and a cardo rider Q2 for my motorbike helmet. They pair up nicely for phone calls, but I cannot get music to stream to the helmet.
All other functions work fine. If I press a button on the phone the sound of the button comes through.
The annoying thing is that my friend has a N95 and it works just fine, so I know the headset is capable.
Is there some setting that I need to change? Or a download to fix this?
Any help would be appreciated. And please take it easy on me as I am not very capable with technology.
Thanks In advance
Adam
Adam,
Double click on the icon of the paired headphones on the bluetooth screen and make sure that Wireless Stereo is ticked.
The system is using two profiles- one for phone calls (headphones) and the other for music (Wireless Stereo). Yout helmet BT earphones should be able to switch in between as long as they are enabled.
CD
Hey CD, thanks, I tried that, but..
When I do that it only gives me the option of "hands free".
If I plug in my wired HTC head phones while maintaining the blue tooth connection to my helmet and play music the music comes through the wired headset, but when I try to voice activate an outgoing phone call the music changes from the wired headset to the bluetooth headset temporarily.
I have the same problem (posted on another thread) Jabra 320's I use to cycle to work, worked OK with my SE W880i. But like you the TD only registers 'hands free', I have checked the profile in BT and it only shows hands free, there is no BT Stereo box to tick/untick. I have tried installing/uninstalling and using a third party BT program (recommend in a previous thread) and have just upgraded to the new official Rom all to no avail.
I think the TD likes some stereo headset's but sees some others as just a mono handsfree unit.
dave.ski said:
I have the same problem (posted on another thread) Jabra 320's I use to cycle to work, worked OK with my SE W880i. But like you the TD only registers 'hands free', I have checked the profile in BT and it only shows hands free, there is no BT Stereo box to tick/untick. I have tried installing/uninstalling and using a third party BT program (recommend in a previous thread) and have just upgraded to the new official Rom all to no avail.
I think the TD likes some stereo headset's but sees some others as just a mono handsfree unit.
Click to expand...
Click to collapse
I have the same Jabra 320's... finally got them working as Wireless stereo pressing the main button again and again during pairing... I didn't know it was going to work - It was out of frustration!!!
I tried several times with my 320's (deleted, re-installed, tried different ways/software) all to no avail.
There is a software upgrade for the 320's on the Jabra site but you need a special usb connector to flash the unit.
In the end I picked up the newer BT3030 cheaply on e-bay and they were recognised straight away as Handsfree and stereo BT streaming.
Both the 320's and 3030's have the A2DP profile, so not sure why the don't see the 320's correctly?
So happily cycling to work again with the BT3030 and listening to BT stereo.
In order for you to do what you want your headset must support A2DP Bluetooth profile (and even if it does it may not work!). That is the profile needed to send stereo music from the HTC. Most handsfree units do not do that - they just support headset and handset Bluetooth profiles.
There is a utility available called BTMusic that can be downloaded free from here. This will allow music to be sent using the headset or handset Bluetooth profiles, and it worked with my Parrot car kit, so it may work for you. The problem is that it is mono only and the quality of the sound is not brilliant - after all these profiles were never designed for that.
So the alternative is to find a new headset that supports both handsfree and A2DP profiles and works with both.
umm yea... i went through EVERY SINGLE thread this thing has. none of the programs work for me period.
I have an HTC Touch Diamond running WM6.1 Pro, and TomTom 7.450. I also have a Pioneer CD-BTB200 bluetooth handsfree unit in the car offering A2DP support.
The setup works really well as a hands free phone. When the phone rings, the stereo will switch to the 'phone' source so the music is muted. When the call is finished it will switch back to the previous source and continue playing music.
As it supports A2DP, I can also play music and system sounds, including the TomTom voices thought the car stereo, as long as the stereo is set to 'bt audio' as its source. In which case it works great, but I am limited to the audio that I can play from the phone.
What I would like is to be able to listen to music on the stereo, ie; radio or cd or whatever, then when TomTom issues some directions, for the stereo to play the directions and then return to its previous state. This is obviously possible because thats how it works when the phone rings.
Does anyone know of any software that could do what I am looking for?
Or would anyone fancy attempting a little app that would do something like this? I'm assuming that if the TomTom voices could be played in the same way as an incoming phone call, then when TomTom issues a direction, the stereo would change to 'phone' the direction would sound, the the stereo would revert back to its previous source.
I would pay a few £/$/€ for something like this, and I'm sure a load of other people would too,
Phew. Sorry for the long post.
Anyone? Or am I asking for something that deosnt exist?
The trouble is that the only way to listen to tomtom through bluetooth is through a2dp, which is always on until you turn it off. Calls dont use a2dp, and are automatically switched on when needed which is what your handsfree unit detects.
One workaround would be to play your music on your phone, and then tomtom will just speak over it, but it means all your cds would have to be ripped to your phone, and your radio streamed over the internet.
Try this,(BTAudio)-it sends all audio via the bluetooth-I assume that the
A2DP stream will run over it.
If not try A2DPtoggle (but I think that is A2DP only)
You have to start the chosen BTaudio app first (make sure BT is already paired and on),then run any other programs.
Ashley
Actually the only ones PPC's that are doing what you like to do are Asus P525, Asus P535 and LG KS20 because all three are working on Broadcom BT stack.
Why Microsoft still with their crap BT??? ... Who knows!!!
Hello, my new car has a bluetooth support, that if I keep my fuze with bt turned on, when the fuze rings it ring on the car's sound, if I answer it works by car's sound and the BT integrated mic, and when I call also, it works the same way.
I'd like to transmit my fuze's sound I hear on WMP, or TCMP right to the car's sound, so I think I would have to configure car's sound as a handsfree.
Would anybody know if the bluetooth's sound would have a good quality? And if there is a away for transmit it?
Thanks
if the car's bt support a2dp you can choose it as wireless stereo under bluetooth settings
if it don't support that you cant
I can't see any configuration about it. what is this a2dp?
My car's bt is only a button, that u press two times to call, and one time to answer, it configures automatically, and I can not see anything about it.
http://en.wikipedia.org/wiki/Bluetooth_profile#Advanced_Audio_Distribution_Profile_.28A2DP.29
Rudegar is right - if your car supports a2dp you can connect the device to your cars stereo. However some car maufacturers offer upgrades for BT-audio for their car stereos (Audi for example) if it´s not buil in originally.
I have a Sony car stereo (BT5100) and tried it with my touch pro. The sound quality however is fairly poor. I have tried different audio players with no improvement.
hippokrates, any idea if the built in bluetooth in a BMW M6 supports a2dp?
I found a PDF-File on the BMW Homepage. Apparently they don´t support a2dp (even though they don´t specificcally mention it) but offer so called snap-in adapters for a bunch of cellphones. Unfotunately the TP is not one of them. However, they tested the BT-functions (hands free protocoll and SIM-card access) and they are officially working with the touch pro. But I suppose you found that out allready ;-)
H, thanks for that. I couldn't find it on the BMW site. The bluetooth does work well with my TP in the M6. I only use it for the phone, which works very well. I'll have to experiment with the music and see if I can get that working. I'll report back.
Hi,
Yesterday, I installed a new car stereo and after a lot of frustration installing it, I was happily surprised the A2DP worked by default, just paired my touch pro with my stereo, start playing in wmp and it comes through my stereo system. However during the day I started looking for another player to use (during my breaks of course ) and installed pocket music player bundle ( I don't know if it has anything to do with my problem, just trying to include as much info as I can ). In the evening I enabled bluetooth of my phone again, I think I also had the headphone logo, but when trying to play using pocket music player and wmp, it always just used the speaker of the phone and didn't seem to send anything through A2DP.
Any idea how this can be? Is there a setting somewhere to change what audio is used (A2DP/Speaker/ whatever...)?
TIA!
OK, this seems to have been quite stupid.
Haven't been in my car since, but same behaviour with my logitech a2dp bluetooth headset.
Going into bluetooth settings, "right click" on logi_stereoV01 and "instellen als draadloos stereo" (set-up as wireless stereo) did the trick, probably the same for my CAR--BT,sorry for the stupid post.
Although it would be nice if the touch pro would automatically set the detected bluetooth device as wireless stereo every time, just as it seems to do for setting it headset when in range while turning on the bluetooth.
Sorry for the strange sentences... it was a long day
same problem
i just bought a bluetooth receiver for the car.
it fits in the lighter place and transmits via FM to the car radio.
My htc connected staight away (no code required to me) with the new "car Kit" found, but whatever i try i always have the sound from the htc speaker...
How can i solve this?
Thanx in advace.