Related
Hi folks.
I am desperate to get Cyanogens mod on my phone but I can't downgrade to 1.5 because i'm on 1.6 with a UK vodafone Magic (32B).
Any chance a serious andoid expert could step in and tell me:
Will there be a new image made to fix this issue?
is there a method I will understand? It says on the Cyanogen Wiki that there has been "some success" with my version but I can't find where it says how to downgrade for my version
I keep hearing about gold card or summink but i'm a noob and I don't have the foggiest idea where to start.
Please help!! and try to make your responses understandable
Dont worry...
Hi there
I think is possible what you're trying to do, but in order to change your rom you don't need downgrading nowadays (HTC are not PSPs, hehe).
I have a magic from Vodafone ES, and what you have to do first is check your model, can be 32A (HTC) or 32B (Vodafone, less ram in cell phone), so you'll probably have 32B like me.
After this, you need Android SDK and drivers to connect your device usb, load a modified SPL via ADB/fastboot (there's a thread in the forum with the HBOOT collection, you need one of those in your cell in order to change the rom).
Summarizing:
1. check if 32B
2. get Android SDK to use the commands fastboot/ADB
3. replace SPL
4. continue with the cyano's wiki
I followed this: http://www.htcmania.com/showthread.php?t=74683 (sorry is in spanish and a bit outdated, but the apps you need like the SDK are in there, and you have some screenshots, you can skip the root part since cyano's mod is rooted already).
About the goldcard method, I dont know because mine hadn't had perfect SPL, I only had trouble with the usb driver, and downloaded HTC sync (look for it on google if you need) and adb/fastboot detected my device.
A good idea is to install a recovery image once you change your SPL, I personally recommend Amon_RA's recovery 1.5.2.
Last but not least, these explanations are the basics, I know it sounds like chinese to you but read more posts in the forum, there's a cyanogen flashing guide as well, with all the information and these steps you'll do fine.
Hope you'll succeed, let me know your issues
I do understand reasonably well but you cannot use the guide on here with a UK magic as the SAPPH.img file or whatever has an incorrect ID. it's at this point the process cannot be completed.
Thanks so much for your lengthy reply but in this case I believe my phone is unique and the problem cannot be be as easily resolved as you suggest. I must downgrade to 1.5.
Are any of the extreme android geeks able to shed light on this?
I can shed light on you as I have a Vodafone HTC Magic 32B. I used the instructions at the link below and got my phone back to Cupcake, but oddly enough I used the MyTouch instructions and searched online for a suitable sappimg.nbh file as the one they provided didn't work for me. Now I am running Qteknology MagicSense Hero ROM with working LEDs. Forget about ADB, SDK and the Goldcard method... I am sure you want the simplest way to unroot so you can get back to 1.5 and the reroot to whatever you like. Here it is: http://theunlockr.com/2009/10/15/how-to-root-a-donut-phone-android-1-6/
This is great news but I have tried that method with the sappimg.nbh and it says incorrect ID every time.
Are you using a UK vodafone magic then? If so, where did you find a SAPPIMG that worked?
Please try and remember!
It doesn't matter that your phone is a UK Vodafone Magic.. if you google sappimg.nbh and download a few until you get the one you need you will have your phone reverted back to it original state... ready to root. If you stop your search after one attempt you will not have done all you needed to do. You don't have to know any codes or get another SD card.. just put some effort into it from your computer. Google is your friend.
but being a bit of a noob to all this, surely trying sappimg files at random might risk bricking my phone? I heard there was a good sappimg for all but my version of the phone which is why I mentioned it.
Maybe someone on here has a sappimg known to work with my phone?
But yes, i'm off to do some intense googling.
Thanks
Hi
I have a UK Voda Magic and I followed this http://forum.xda-developers.com/showthread.php?t=579328 and worked perfectly for me
It truly is lovely of you all to try and help and I appreciate it but I suspect you have not read my comments properly.
Those of you that have commented here were only able to get it to work because you were flashing from/rooting from a 1.5 cupcake build. Once the OTA 1.6 donut update is on a UK magic it cannot be downgraded and so all comments thus far are superfluous. contrary to other comments it is necessary to flash SAPPIMG.nbh first and this does not work on my phone - incorrect CID.
Is there anyone on here that can help with MY issue?
Thanks.
Strange, because I have no issues flashing UK Voda 1.6 phones, just fastboot and use ADB to load recovery image, then flash whatever 32B ROM I like (Dwangs 1.17.1 is great). I did a work collegues before Christmas and his phone had never been modified, only received the OTA update from 1.5 to 1.6 around October time.
I'm on it. That's the way I used to flash roms back when i first got my magic. Now i've been thrown by all the simple guides to put cyanogen and I thought the sappimg method was the only way. I'll just download the sdk and get on my merry way
I don't understand what the issue is? I have a UK vodafone 32B and have been flitting between CM's mods, Hero mods backwards and forwards with no issues whatsoever?
I'm on CM's latest right now (well, a few back now 4.2.11 latest), just followed the instructions and it worked....?
I certainly did read your OP correctly and I also was on 1.6 when I followed the link I posted. In that link it has instructions on how to do it if you are on 1.5 OR 1.6
Started out with 1.5 Vodafone UK Magic which i've flashed many times using the fastboot boot cm-recovery-1.4.img method.
At one time i went back to stock 1.5 but let it update itself (OTA) to 1.6. Since then i've continued to flash new ROMs without problem.
Alfieg said:
but being a bit of a noob to all this, surely trying sappimg files at random might risk bricking my phone? I heard there was a good sappimg for all but my version of the phone which is why I mentioned it.
Maybe someone on here has a sappimg known to work with my phone?
But yes, i'm off to do some intense googling.
Thanks
Click to expand...
Click to collapse
hi alfieg
ive vodafone magic 32B with donut and perfect SPL, in present day, I tried all the guides and methods in many forums, without success, for example, if you follow the guide in wiki cyano, already the first step there are problems, how I try to update with sappimg. (cupcake 1.5) as the ends' update writes "main version is older," "update failed "... if you do not then a way to get cupcake is impossible to have root on magic 32b with donut and Perfect spl ....
Indeed in the wiki says, if you have donut Downgrading to 1.5 FAILED: HTC Magic Vodafone ES (Spain) (32B) Official 1.6 updated OTA "
wait a few geek we solve the problem ...
I don't see what the problem is. You should have been reverted back to 1.5 and flashing new ROMs. The instructions are simple.. someone else has done all the hard work.. all you have to do is download a file and hold your phone.
blackvyper said:
I don't see what the problem is. You should have been reverted back to 1.5 and flashing new ROMs. The instructions are simple.. someone else has done all the hard work.. all you have to do is download a file and hold your phone.
Click to expand...
Click to collapse
download a file, to make what? If you can not root for real?
Will you lot please listen to me!
There are two methods reccommended:
1) Flash the SAPPIMG.nbh to downgrade back to 1.5 - this does not work on a UK magic on vodafone 32B at all! It reports Invalid CID, update failed!
2) use the fastboot boot cm-recovery-1.4.img via the SDK - This does not work on my phone! - I have the device listed when I use "adb devices" so the drivers are ok but it hangs at <Waiting for device> when i try to fastboot boot cm-recovery-1.4.img!!!!!! No ammount of killing the server and remounting as per the cyano instructions works!!!!! in fact, it wont let me remount (Operation not permitted)!!!
If you don't understand please don't post. People who have not updated to 1.6 OTA and people who don't have a UK voda 32B - stop posting here.
Grrrr
No need to downgrade
Alfieg said:
Hi folks.
I am desperate to get Cyanogens mod on my phone but I can't downgrade to 1.5 because i'm on 1.6 with a UK vodafone Magic (32B).
Any chance a serious andoid expert could step in and tell me:
Will there be a new image made to fix this issue?
is there a method I will understand? It says on the Cyanogen Wiki that there has been "some success" with my version but I can't find where it says how to downgrade for my version
I keep hearing about gold card or summink but i'm a noob and I don't have the foggiest idea where to start.
Please help!! and try to make your responses understandable
Click to expand...
Click to collapse
I have a New Zealand Vodafone Magic 32B and they share the same Hboot 1.33.0004 (SAPP10000) SPL with the UK (and NL and AU) vodafone phones. That means they are VERY easy to load alternate ROMs onto. The horrible stuff many Americans and others have to go through to root their phones isn't required for us.
You do need to get the Android SDK installed and talking properly to your phone.
Assuming you have the SDK set up and you can see your USB-connected phone listed when you enter the "adb devices" command, then the rest should be easy. See the Cyanogen Mod wiki for the details. You want the section on "non-Tmobile 32B magics" on this page:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
It starts with:
"Non-TMobile 32B Magics
If the above doesn't work for you, don't despair. Some non-US Magics are shipped with a fastboot compatible SPL installed. If you see 3 skateboarding androids when you boot to fastboot, you should be able to do the following:"
..............
This is the part you want to pay attention to, assuming you have the SDK installed properly. Our phones are actually MUCH easier to load others ROM on because we have those fastboot-enabled SPLs already in place and this is the first, BEST way for us to do it.
Whatever you do, do NOT flash the "Danger SPL". There is no need to for an HTC Magic with the Hboot 1.33.0004 (SAPP10000) SPL.
If you're hopelessly lost at this point, seek hands-on local help. You don't know enough to do this by yourself without risking screwing up. if no one can help you, then take your time. Learn the stuff you need to know....Being in a hurry is a great way to go wrong. I spent 3 months reading and thinking about it before I loaded my first ROM. Much of the advice is for the Dream / G1 or locked MyTouch3G or Magic 32B phone from telcos who lock them....and simply isn't relevant for the HTC Magic 32B from Vodafone. the single section I'm pointing you to above is all we need to get it done.
Finally, here is my own "simple guide" for getting loading alternate ROMs on a Vodafone HTC Magic 32B. This is about OUR phone...and should work if you work your way through it.
http://truthseekernz.blogspot.com/2009/11/simple-guide-to-loading-new-roms-on.html
You don't need to worry about "gold cards" and all that stuff. You'll be flashing an already rooted ROM and you will have backed up your un-rooted original load with "nandroid" before you change ANYTHING. That backup is your path back to the way your phone was before you rooted it by flashing an already rooted system ROM. in loading ROMs like Cyanogen's you're not baking a cake, you're buying one....so you don't need to know how to make one, you just need to know where to get one and how to serve it....if that analogy makes sense.
Simply, you start by: fastboot boot RA-recovery-1.5.2G.img:
Then, from the recovery menu of functions you do these steps:
1. Backup (nandroid)
2. Wipe system / data
3. Wipe cache
4. flash from any zip on sdcard (the one you want to flash today, you may have put several different ROM images in /sdcard)
5. reboot to brave new world.
6. Make a backup copy on your PC of the /sdcard/nandroid folder on your sdcard so you won't lose it accidentally if your sdcard is corrupted, lost or stolen.
Done.
To save time and let you backup / flash ROMs anywhere you happen to be standing, you can flash Amon-RA's recovery onto your phone or you can load it via fastboot every time and leave the default recovery in place. The very first nandroid backup you made will have backed up the factory recovery image as well as the factory system image as they were at the time you backed them up. So they can be restored if you want to at some point update them with an OTA update. I suspect Vodafone / HTC will be rolling out an Android 2.0 / 2.1 update to Magic phones at some point. If they don't that would be a black mark against them....something to remember when thinking about buying any future phone from anyone: "WILL THEY SUPPORT IT FOR THE SAME 2 YEARS YOU'VE SIGNED UP FOR".
If the answer isn't YES......then that's worth remembering. Vodafone / HTC's record so far is good. The last OTA update was barely 3 months ago.
Alfieg said:
Will you lot please listen to me!
There are two methods reccommended:
1) Flash the SAPPIMG.nbh to downgrade back to 1.5 - this does not work on a UK magic on vodafone 32B at all! It reports Invalid CID, update failed!
2) use the fastboot boot cm-recovery-1.4.img via the SDK - This does not work on my phone! - I have the device listed when I use "adb devices" so the drivers are ok but it hangs at <Waiting for device> when i try to fastboot boot cm-recovery-1.4.img!!!!!! No ammount of killing the server and remounting as per the cyano instructions works!!!!! in fact, it wont let me remount (Operation not permitted)!!!
If you don't understand please don't post. People who have not updated to 1.6 OTA and people who don't have a UK voda 32B - stop posting here.
Grrrr
Click to expand...
Click to collapse
Get latest version of fastboot binary. I had problems with original one and htc magic. Drop fastboot.exe into the sdk tools folder.
Reboot your phone holding back and power simultaneously.
Then plug usb cable.
in Dos prompt go to sdk tools folder and type "fastboot devices"
if your device is listed you are good to go.
then "fastboot boot cm-recovery-1.4.img"
(If ROM installed via official HTC RUU- RUU_Sapphire_Rogers_WWE_3.05.631.7_R_release_signed_NoDriver.exe)
UPDATE!! **SOLVED** April 25, 2010
Download new RUU
http://www.multiupload.com/XQEH9NVGY7
Flash with Goldcard method http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
1. Download RUU linked above.
2. Install update using RUU.
3. Turn on phone and connect to computer.
4. Get RA recovery and SPL also linked above and drop them to sdcard root directory.
5. Run SDK: adb shell
6. Install recovery: flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img http://forum.xda-developers.com/showthread.php?t=561124
6. Turn off phone and turn on again holding Power+Home. RA Recovery should appear.
7. Flash zip from sdcard.
8. Use file: update-hboot-1762007-signed
9. Done. PSPL broken.
10. Build a shrine for orange_24
****************************************************
**Not Successfully Rooted: Feb. 2, 2010 (AFAIK)
I decided to start this thread because the info for again obtaining root, for those of us dumb enough to update to the official Rogers ROM 3.05.631.7 via the RUU, is all over the place in about a million different threads. My hope is that we can organize it all in 1 place.
At this point, yes, we all know we were impatient and newbs and everything else. Ok, lesson learned. So, lets move forward and try to get this thing rooted.
If you are a developer who has the talent to help root this ROM and have lost interest in the Magic or moved on to the Nexus One or Droid, we ask that you please try to spend a few moments on this and help out those of us who are really stuck here. Personally, I'm getting pretty desperate and thinking of even replacing the phone.
Please post what you've tried in attempting to again obtain root, your failures and hopefully successes.
*One Click Root: http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/ Cant' back up Recovery.img Error(Tried clicking the hidden Star next to "Back Up Recovery" and skipping this step...and just flashing recovery-RA-sapphire-v1.5.2H.img. Didn't work either) Tried with Amon_RA Hero recovery.img also, without success.
*Tried downgrading to Rogers' last official ROM via the RUU for (Rogers)_RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_NoDriver.exe RUU would not let me proceed because the ROM was older than the one installed. Attempted several times both with and without a goldcard installed.
*ADB: Will see the device, initially, but a command of "adb remount" kills the connect. same with "adb root" **EDIT
*Fastboot: Error- Does not allow access
*Relentless Rooter: http://forum.xda-developers.com/showthread.php?t=556200 No luck obtaining root
*Fix Perfect SPL: http://forum.xda-developers.com/showthread.php?t=548218&highlight=create+gold+card With one GoldCard getting Update Fail error that SAPPIMG is older than one installed. When trying the other GC, get Update Fail Error that Model ID is incorrect. Tried 2 different micro sd cards, one Sandisk and one Patriot. The card was recognized by my pc after I was done creating the GoldCard, so unless I'm doing something wrong the GC was created properly. Is the goldcard.img supposed to dissapear or remain on the card after your copy/paste write/save to the sd card disk?
* Tried RUU for RUU_Sapphire_HTC_Europe_3.04.401.2_HTC_AT_test_signed_NoDriver.exe http://forum.xda-developers.com/showthread.php?t=625108 RUU would not let me proceed because the ROM was older than the one installed or Device ID was wrong. Attempted several times both with and without a goldcard installed.
*Tried RUU for RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe http://forum.xda-developers.com/showthread.php?t=621415 RUU would not let me proceed because the ROM was older than the one installed or Device ID was wrong. Attempted several times both with and without a goldcard installed.
*Tried RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_signed_NoDriver.exe RUU would not let me proceed because the ROM was older than the one installed or Device ID was wrong. Attempted several times both with and without a goldcard installed.
I've probably tried a few more methods to obtain root. Those were all fails, too. I'll post the links, as well, when I find them again.
Hopefully this thread will lead us all in the right direction.
Here is the link to the same topic in the HTC Dream Forum-in case they find out something that might help us out: http://forum.xda-developers.com/showthread.php?t=625732
i guess its time to play doctor with my new phone from rogers and swap the board from my old one.....
considering nothing works, i think any new idea would be a good idea
novadoc said:
considering nothing works, i think any new idea would be a good idea
Click to expand...
Click to collapse
like i said my idea was to swap my old motherboard into the new phone
you can give it a shot
but personally, unless you know exactly what your getting into, i wouldn't mess with the hardware
novadoc said:
you can give it a shot
but personally, unless you know exactly what your getting into, i wouldn't mess with the hardware
Click to expand...
Click to collapse
i already did it lol im more of a hardware then software
I know it might be nothing but when the Rogers RUU unpacks the img file loads as sappdimg and not sappimg. I don't know if the extra d in there means anything or if its something that shows up later.
I also try every method above and not luck also...
is there a possible way of tricking the system... with a higher build number and SPL with a custom installation from files that I see from one of the post where rogers send the user some files because they were running Win7?
I think that's the problem
We have the highest spl# and its perfected
So until someone gets their hands on a higher version than ours that is imperfect or engineering...
We are SOL, although I am hopeful someone is working on this for us.
shael said:
i already did it lol im more of a hardware then software
Click to expand...
Click to collapse
Did it work?
I have an Rogers HTC Magic and I didn't apply any update from Rogers since I bought it on June 2nd.
It's very strange that "adb devices" doesn't see the device?
have you enable the "USB debugging" ?
That part should work (when the devices is started).
novadoc said:
Did it work?
Click to expand...
Click to collapse
pfft ya ofcourse it worked... i have my older motherboard with my old rom and my old info all i did was swap the screen and case.... done deal... 5 min job lol
Would someone please report the radio and SPL versions (for the result of the 3.05.631.7 update)?
feisty_noodle said:
would someone please report the radio and spl versions (for the result of the 3.05.631.7 update)?
Click to expand...
Click to collapse
apphire pvt 32a ship s-on h
hboot-1.76.0010 (sapp50000)
cpld-12
radio-6.35.10.18
feisty_noodle said:
would someone please report the radio and spl versions (for the result of the 3.05.631.7 update)?
Click to expand...
Click to collapse
apphire pvt 32a ship s-on h
hboot-1.76.0010 (sapp50000)
cpld-12
radio-6.35.10.18
Well, until it gets cracked, here's something that will make you feel a little better about being stuck on this ROM.
Google Search by Voice, installable .apk from Euro Android Market. Just run the installer through Astro, etc., and G Search by Voice is back on the Search button of your phone. You might need to launch the app first via the icon in the app tray, then reboot the phone to make the search button recognize its there. But it will be there.
http://www.eclosion-android.com/com.google.android.voicesearch.apk
BTW, not my link in case mods want to get involved.
Enjoy!
i think the first step would be to getting ADB working again
any ideas?
novadoc said:
i think the first step would be to getting ADB working again
any ideas?
Click to expand...
Click to collapse
I can used adb devices to see my connected htc magic.... but other function permission not allow...
Is this thread in the Dream Forum a path to follow to try, or just a good way to brick your Magic? I haven't fully read through it to see if this is to keep root, if you already have it and flash the Rogers Dream ROM for data/ or to regain root if you flashed the official Rogers RUU with a Dream. The post says should work on all Rogers phones, but i feel a brick coming on for me.
http://forum.xda-developers.com/showpost.php?p=5480955&postcount=416
Hi all
I feel like i am going round in circles trying to get my 32b magic rooted. Ive tried all sorts of methods even buying relentless rooter magic, but after lots of helpful emails i was told i have a perfected spl1.33.0007.
I was then told my problem would be solved by creating a gold card. I did this following the unlockr guide. Then went back to trying to use relentless rooter but I still cannot get the phone rooted.
I would appreciace any guidance at this point as I really dont know what else to do. Some of the help people give is great but it assumes a certain level of android knowledge that I have not got and will not ever have.
Thanks in advance fellas. I hope you can help as I love my phone
Regards
Del
have you tried follow these instructions?
http://forum.xda-developers.com/showthread.php?t=548218
to make sure your not on perfect spl.
for rooting check this thread
http://forum.xda-developers.com/showthread.php?t=547133
then you should be able to fix it
Sorry to be stupid but where do i get the following from?
* an non-perfected SPL (preferably an engineerings SPL).
* a ROM with a version that is HIGHER than your current ROM version.
Im sure this is all straighforward stuff to all you guys who do this all the time but it just seems like one obstacle after another for me
Thanks again for the help
i don't know much about the 32b version, but the second thread i posted to you is the one to use, try read very good the first post in it, cause the first thread i posted he tells 32b user to go to the second thread, so try study the second thread thats what i can do to help, hope you find something in it.
Again please excuse my stupidity but i have not a clue what ROM is appropriate for my phone. This is the problem that I always encounter, that others assume that your level of knowledge is comparable to theirs. I know im not a total moron but this is a whole new language to me and the last thing i wanna do is ruin my phone. It seems the more i read on forums etc the more i get confused as there are a seemingly infinite array of different methods to get your phone rooted.
well can you provide info on which spl radio you have now first?
He mentioned in the original post he had perfected spl1.33.0007.
How about telling us what you did with the goldcard process, what happened and what went wrong? Any errors received that you can tell us etc will help us to help you.
just wondering cause he messed with the phone after getting the info of perfected spl so just wanted to be clear what there is to work with so he can get a working good phone
I followed the gold card process on the unlockr webby and all went fine. No issues there at all.
Im now stuck as to what to do next. I bought relentless rooter software and the guy on support has been helpful. Just wondering what my next port of call should be. Like I said im no Mr Android but Im not totally clueless either. I would just like it if someone could tell me what should be the correct/best/simplest procedure for getting my phone rooted and getting the best/closest ROM to 2.0/2.1
Sorry to be a pain but there is so much info out there its really difficult to determine whats right and whats wrong.
BTW Ive got 2 magics so if a totally brick one, Ill know to definitely stop. Unfortunately they both have the same spl
Thanks again in advance
Just tried another method from the relentless support. Ive put SAPP.nbh on my goldcard and restarted with vol down and power. Tried to apply the image and got an error of
model id incorrect!
Update fail
Do you want to reboot device?
any more advice please?
first off im not trying to be a **** here... but..if your having this much trouble rooting, and you admit you dont know much, then why are you bothering rooting??
if you root and get a custom rom on your phone, you will NEED to know how to update said rom, as you will not get support from your carrier.
rooting is not hard, there are MANY guides out there that hold your hand and walk you threw rooting, installing rom ect ect...
for you i would recommend cyanogen mod (www.cyanogenmod.com) JUST because it is stable and works great.. i dont think you want a rom like super d , cdsi , fasttest or something like that where you will probably have to update your rom somewhat often.
please see this guide and READ it fully, its not hard to understand or to follow....just make sure you are on a 32B, if you are not then this guide will not work..
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
also you are looking for a rom that is 2.0/2.1, first off they are not fully functional, there are issues with all 2.0/2.1 roms out there (some are great dont get me wrong, but in my mind not fully functional) so again i would recommend cyanogenmod its based on 1.6 but has bits and pieces of eclair(2.0) in it. before you try a 2.0/2.1 rom i would say get root first, run cyanogenmod and go from there..
again.. im not trying to be a ****.. but it really isnt hard rooting.. and hearing you say you dont know anything is kind of rediculous.. i came into the android scene not knowing anything, its easy to learn if you want to, if you want the easy way out without learning then dont root...
edit: Im sorry i sound harsh, but i still stand behind what i said.. please please please try the cyanogenmod wiki guide, and also please post EXACTLY what sys ver your running, which carrier your on, and confirm please the SPL..
i started out knowing nothing too, but reading and do what guys say in their guides gets you far, and when keep wanting to tell in every post (i know nothing) is kinda saying, don't use custom roms cause if something goes wrong, you will be more fustrated and angry on the android system (also not trying to be rude, but think about it, do you really want to root?)
In the normal course of events I am capable of following the simple instructions found on forums like this to do whatever I need. In the past I have chipped my xbox and flashed my 360, but I am really struggling with my phone. The reason I went for the relentless piece of software was because it was supposed to be simple.
As far as I was concerned I was having a problem following the instructions until I was told I had a perfected SPL. Thats why I had so much difficulty in the past getting it rooted. I thought using relentless might help me out in that respect. It didnt.
So I then find out that I need to create a gold card. Got that sorted ok, then proceeded with the root process. All systems stopped again as I get model id incorrect error. I posted on here to see if anyone else was having the same problems and would be willing to help.
I am really thankful for the suggestions so far and if anyone has any more I will endevour to use them. But my main problem is that there is so much info out there its difficult to work out whats right and wrong especially if you are encountering problems like I am. Ive seen many videos and read many tutorials on how to root so I know it should be straightforward but that has not been my experience thus far
have you tried the wiki link i posted??
start over.. forget everything you have done.. and try that wiki link..
again we need to know your phone model, carrier, spl and sys version(android 1.5, 1.6, ect ect) to move forward if you still are stuck..
Thanks again for your help
My phone is a UK Vodafone Magic 32B
1.33.0007
CPLD-10
Radio- 2.22.19.261
Its running on cupcake and wouldnt update OTA when it was sent out last year
Just reading through that wiki now. Thanks again for all your help. I really appreciate it
also see this
http://forum.xda-developers.com/showthread.php?t=640229&page=2
delboypb said:
Thanks again for your help
My phone is a UK Vodafone Magic 32B
1.33.0007
CPLD-10
Radio- 2.22.19.261
Its running on cupcake and wouldnt update OTA when it was sent out last year
Just reading through that wiki now. Thanks again for all your help. I really appreciate it
Click to expand...
Click to collapse
You need to make certain that your gold card was made properly. My first attempt at making a goldcard failed for no reason what so ever. The second attempt went fine on the same micro sd card. I would follow the directions of using Flashrec. That process has been flawless due to the fact that it takes advantage of a bug in Android 1.5. It's easy as long as your goldcard was made properly. Good Luck
p.s. once your able to flash an engineering/non-perfected spl, Leave It Alone.
I had the same problem with mine, couldnt find a guide that works on a uk Voda Magic
I used this and it worked great:
http://wiki.cyanogenmod.com/index.p...o_CyanogenMod#Spanish_Vodafone_1.6_NOT_rooted
Use the guide for Non-TMobile 32B Magics
sapphire pvt 32b ship s-on g
hboot-1.33.0007 (sapp30000)
cpld-10
radio-2.22.23.02
jul 31 2009, 15:49:25
main version is older!
update fail!
do you want to reboot device?
action yes
power no
tmobile mytouch 1.6 just a regular mytouch not 1.2 ( fender)
i had rooted about 12 mytouch ( tmobile usa) and never had any problem till now,
i did the gold card using theunlockr how to.
and i still get the same error.
not know what to do to get this done.
i just can't downgrade to 1.5.
thanks.......................................
I finally pulled my head out of my ass last night/early this morning and got a handle on what i needed to do. And now I have a rooted magic with a shiny new hero rom on it. Very pleased with myself. Now off to try to get the second one done. Fingers crossed
Thanks everyone for all your help and patience. Its really appreciated
Back to square 1 again. After the excitement of havig a working root and displaying a rather lovely hero rom, I though all was well. So I decided to have a crack at rooting my other magic. During the process which was unsuccessful this time my original rooted decided to shut itself down for no apparent reason. Whe i tried to reboot it would get to the splash screen and no further even though it had been working perfectly happily just hours before.
Any help please?
The details are:
32b ENG S-OFF h
HBOOT-1.33.2005 (SAPP10000)
CPLD-10
RADIO-2.22.19.26I
I rooted using the gold card method and flashed with a hero rom. All the instructins taken from theunlockr.com as I couldnt get the cyanogen wiki instructions to work.
I did try the cyanogen wiki method having already rooted using gold card, but that phone also stops at the splash screen after flashing bot images. I waited several times for 15mins+ but nothing
I would really appreciate some help mainly on my first issue
Thanks in advance
First, I'm sorry if I posted this in the wrong section.
I know this is the G1 area, but need help.
Well, I was looking at some tutorials from TheUnlockr.com and they seem pretty easy on a mytouch 3G. I have successfully installed Cupcake (1.5) on my phone.
But before I do the actual rooting, I wondered if anyone would be so nice to
guide me with installing [ROM] KiNgxKxROM Sense Hybrid Version 2.3 "Back to Work We Go" <11/9/09> - xda-developers onto my mytouch.
I don't know what to do, and I've tried reading the steps but I'm completely lost.
IDK if the steps are for G1 users or mytouch. I hear all these "spl"s and "radio"s and don't know what it is.
All I want is to install that ROM on my phone. the Unlockr says to download the ROM's .zip file and simply flash it, but idk if that's exactly what's required for the above ROM.
Anyone suggest other ROM that has the HERO Sense UI?
and what's a gold card? do I need that?
and I only have a 1GB MicroSD card...idk if that's relevant, thanks so much!
*facepalm
http://forum.xda-developers.com/showthread.php?t=519523
well that link doesn't work.
All I'm basically asking is if I can just load the already downloaded "ROM" and simply dragging it to my SD card to be able to install....since it's for the G1 and idk if it's the same process as the mytouch.
DracoMalfoy said:
well that link doesn't work.
All I'm basically asking is if I can just load the already downloaded "ROM" and simply dragging it to my SD card to be able to install....since it's for the G1 and idk if it's the same process as the mytouch.
Click to expand...
Click to collapse
I beg to differ. The link does work.
You should read about spls and radios before flashing roms. Anyway, good luck.
It should work in your case....and if it doesnt....no harm done.
So you're saying that I don't need spls?
You do need an spl.
http://forum.xda-developers.com/showthread.php?t=519523
Yes, it does work. It's a link to a thread stickied in this forum. It's called ***Informative Links*** - Read before clicking "New Thread"
There is no point spoonfeeding you information because you don't *learn* and just end up following a bunch of steps without understanding what you're doing. This greatly increases your chance of doing something wrong just because someone tells you to, this can and does happen, usually unintentionally because a certain step worked for someone else but not for you because your phone can be different in a way you don't yet realise.
You haven't even told us what phone you have, let alone any technical information about it. So, go look into specific information about your handset. Learn about what SPL you have now, this will tell you if you need a goldcard or not (Magic) or whether you need to install the DangerSPL (G1) or not. SPL is very dependent on the radio installed, if you get the versions wrong you will brick your phone. Learn about recovery images and install one on the phone. Depending on ROM, you may have to partition your SD card, which you can do from recovery.
I hope that's enough of a good start for you. If not, I would suggest not taking the risk bricking your phone and just be happy with what you have.
alritewhadeva said:
You do need an spl.
Click to expand...
Click to collapse
Could you guide me through?
I'm new to this rooting stuff and when I was looking at theUnlockr videos the guy didn't mention anything about SPL, he simply said to drag the ROM into the SD card and then wipe, partition, and flash or something like that.
But since the rom im trying to install is for G1 and Mytouch I'm not sure if the same process is for both or just the G1.
Well, I have a T-Mobile MyTouch 3G with 1.5, IDK about the other stuff, but here's some info I found on my phone:
SAPPHIRE PVT 32B
HBOOT-1.33.0006
RADIO 2.22.19.261
IDK, that's it.
DracoMalfoy said:
Well, I have a T-Mobile MyTouch 3G with 1.5, IDK about the other stuff, but here's some info I found on my phone:
SAPPHIRE PVT 32B
HBOOT-1.33.0006
RADIO 2.22.19.261
IDK, that's it.
Click to expand...
Click to collapse
You will need SPL's, a swap partition, etc. etc.
Seems like you only have the stock SD card.
Your device will not even be usable on a daily basis without at least a class 4 microSDHC
Go for a basic Eclair or Donut rom first before you do some serious damage to our phone.
And there literally is a MyTouch3g section... This is a G1 section.. if you're just getting started, you're better off over there.
Oooooooo
Can I run this on sapphire? When's the next update?
I can't even believe this thread is happening....
Evening, everyone.
I must now be the last person on Earth who's not been able to root his HTC Hero GSM.
Initially I got it locked to Orange Spain with Android1.5 firmware 2.73.405.5. Unlocked it through a code I got from a guy off the internet, worked fine, can now use any operator. Then, I used Flashrec + Ra recovery1.2.3.img tool to install an Generic unbranded ROM (instead of Orange's, because they haven't released the 2.1 update and I didn't want to wait.), after I successfully did so, the phone updated itself OTA do Sense UI 2.1 firmware 3.32.405.1. Great, so far. After updating the phone is considerably slower and the available memory at any given moment is below the usual 80Mb that I used to have with the old Firmware and that's right after I 've done a system reset and wiped the cache data from the Android recovery. The phone also comes pre-loaded with a bunch of software I won't use and can't uninstall either. So now I want to Root my phone so I can mainly load a ROM that doesn't come with so much pre-loaded crap, enable some sort of Apps2sd to save internal memory and perform a slight overclock with SETcpu.
After the OTA update the cellphone doesn't allow me to use flashrec anymore, it displays "Can't run command" message and that's a dead end. Other users with the updated Firmware get the same message.
I used Unrevoked3.1 and it says it worked but I don't see any effect and upon reset Home+Off I get the standard "!" screen and the standard Android recovery options if I press Vol up+Off), in general I don't know if Unrevoked works with Htc Hero GSM or not.
Tried the goldcard method and after my pc successfully recognizing my phone (returns correct serial number when I type adb devices command), the first command line I'm told to type doesn't work at all so I can't get the code necessary for this method.
My question is simple:
Given everything I've tried so far, what's the easiest way to Root my Htc Hero GSM 3.32.405.1, please?
You've updated to new ROM with no loopholes for rooting. You're only option is to use goldcard method.
Don't ask for help creating a goldcard here, it's not hard and this isn't the right board - use 'Search'.
I see, thanks, at least now I know I can't do it for now. Got make the most of what I have now.
pmoseley said:
You've updated to new ROM with no loopholes for rooting. You're only option is to use goldcard method.
Don't ask for help creating a goldcard here, it's not hard and this isn't the right board - use 'Search'.
Click to expand...
Click to collapse
There actually is a loophole. See this for instructions on how to root the 2.1 RUU.
I already did it. Easier than any of the other processes. Just a small adb command line and done.
Any good 2.2 ROMS out there? =)
Check villainrom.co.uk
Just intstalled 2.2 myself, very good and stable.
Sent from my Froyd Villain Hero using XDA App