Is there a way to stream audio via Bluetooth from the TP to my Garmin Nuvi 780? The phone syncs via bluetooth well.
The Garmin has an FM transmitter which works well in my car.
Of course, I could just pop the sd card outta the fuze and into the garmin, but what fun would that be?
Related
I am looking for a quick and easy way to integrate my trinity with my car.
Currently I have have a generic car mount with charger. However, I find that TomTom and telephone calls over the speakers are too quiet.
I was thinking of installing a Parrot MK6000 in my car as a method to stream audio from my trinity to the car stereo whilst also acting as a car kit for hands free use while driving. Has anybody had any experience with wiring up this kit? is it easy for a moderate level electronics users (able to solder wires proficiently etc.) to wire up?
Alternatively does anybody know of other solutions to integrate the trinity with the car stereo?
Hello:
I installed this hands free in my car, and it works really fine as a hands free. The audio streaming works well too, but the sound is quite methalic. With tomtom, there is a delay in the sound, the first word it says, for example "...Turn on the left in...." you listen "...urn on the left in ..." and it hanpens allways when tomtom starts to talk.
My OS version is wm5 and I read that wm6 solves this problem.
I recently bought a LG LAC7700R (carstereo with bluetooth and cd/mp3/wma player, with a seperate mic you can place somewhere in your car) works good, up to 5 phones can connect, last six called contacts it will remember. no phonebook in carstereo. Carstereo mutes automaticly by incoming call. You can even use BT audiostream.
i have always BT on, on my phone, it will connect by itself with the carstereo.
works fine for me.
now i am looking for a nice phoneholder with only a charger.
stormyb said:
I recently bought a LG LAC7700R (carstereo with bluetooth and cd/mp3/wma player, with a seperate mic you can place somewhere in your car) works good, up to 5 phones can connect, last six called contacts it will remember. no phonebook in carstereo. Carstereo mutes automaticly by incoming call. You can even use BT audiostream.
i have always BT on, on my phone, it will connect by itself with the carstereo.
works fine for me.
now i am looking for a nice phoneholder with only a charger.
Click to expand...
Click to collapse
I have a similar setup, with the Sony MEX-BT2500 instead.
However I did not manage to route the Tomtom or iGO sound over the BT A2DP stream.
As a charging holder I have the Brodit Cradle installed.
esackbauer said:
I have a similar setup, with the Sony MEX-BT2500 instead.
However I did not manage to route the Tomtom or iGO sound over the BT A2DP stream.
As a charging holder I have the Brodit Cradle installed.
Click to expand...
Click to collapse
check this, maybe it will help:
goto bt settings in your phone and activate bluetooth stereo on. that's the thing for play mp3's and navigationvoices over BT. The handsfree mode is for phone voice. (leave that on!)
does sony support a2dp ? maybe that's the problem.
stormyb said:
check this, maybe it will help:
goto bt settings in your phone and activate bluetooth stereo on. that's the thing for play mp3's and navigationvoices over BT. The handsfree mode is for phone voice. (leave that on!)
does sony support a2dp ? maybe that's the problem.
Click to expand...
Click to collapse
Actually I bought the Sony because it supports A2DP. And with MortPlayer it works flawless when listening music. With activated Bluetooth Stereo (Headphone Symbol in top bar) Tomtom still uses the internal speaker.
I got a bluetooth stereo headphones that I use with A2DP enabled bluetooth dongle on my PC to listen to music wirelessly and watch movies in silence. I also use bluetooth ActiveSync with the same bluetooth dongle. Dongle uses Toshiba stack for windows.
Problem is when I am listening to music from my PC thru A2DP profile and then connect my Treo 750 for ActiveSync, the sound comes thru my headset not in smooth manner anymore. It breaks and delays sometimes. Maybe a port conflict. Is there any way I could get around it??
sounds more like bluetooth cant provide enough bandwidth
maybe a bluetooth v2.0 dongle could cope
Is there a way to use Diamond as a bluetooth stereo headset? When I watch movies using a projector I’d like to transfer the audio stream from my laptop via bluetooth to Diamond and listen to it using its headset. But I can’t make it work. It works perfectly in the opposite direction so I can transfer music stream from Diamond to the laptop and able to hear it through its speakers. So both devices support A2DP profile.
Is there any solution?
Yes, that's exactly what I'm looking for. I lost my BT headset I used for online gaming, yet I have a perfectly fine Fuze that works well with my Plantronics headset that I use for my xbox.
Is it possible to use the fuze as a rx/tx passthrough unit for a wired headset?
Basically:
Wired headset > Fuze with Bluetooth turned on > Fuze synched to computer with bluetooth > Chatting with wired headset through the Fuze's bluetooth in online games.
Not odd at all
I would also love thing like this
I think if the bluetooth software on the computer
support audio gateway
and the x1 show up as supporting audio gateway bluetooth profile
when one bound it
then one can pick the x1 as soundcard to be used
in audio settings in control panel in pc windows
and it should work
Well I am using Bluesoleil on my laptop with Bluetooth v1.2 which actually connects well even to my A2DP dongle with full stereo sound even if it is not v2. But when I browse the services of my Raphael, the comp shows only Dial-Up Networking, Object Push and PAN... no Advanced Audio or Headset. Maybe I would need to configure the raphael somehow?
darfri said:
Well I am using Bluesoleil on my laptop with Bluetooth v1.2 which actually connects well even to my A2DP dongle with full stereo sound even if it is not v2. But when I browse the services of my Raphael, the comp shows only Dial-Up Networking, Object Push and PAN... no Advanced Audio or Headset. Maybe I would need to configure the raphael somehow?
Click to expand...
Click to collapse
After doing some research, it would definitely have to be added in by way of some third party app. There are only two or three phones out there that support this. Essentially, a deal was made to where phone manufactures wouldn't include the Advanced Audio or Headset profile in their phones.
I don't see why someone couldn't make a program for this though.
I have been looking to do this with other HTCs for more than a year.
So far I can only say it's not possible as it's not supported by the WM BT stack.
Hi, i was wondering if there is some kind of software to transmit over BT music from my blackstone to my car BT system (Blue&Me) so i can listen the music stored on my phone in my car.
Thanks
You need a BT receiver which supports A2DP.
You can buy a headunit (stereo) which will support A2DP, and do hands free calls from around sixty pounds.