Database Info

RUU Updates HTC: BE CAREFUL

--- Updated and simplified
Updates from HTC are randomly released for countries and regions. These Update may lock your phone. As of today, phones can be unlocked again by using the GOLDCARD approach. However, there is a much simpler way to prevent bad things from happening:
If you like flashing HTC roms and have no intention to lock your phone, follow these steps:
On the PC
1. Double Click the .exe from the update. Wait for the first window to appear (DO NOT CONNECT YOUR PHONE). Don't close the application but do not continue
2. Open explorer and navigate to the hidden directory:
Windows 7: \users\$username$\AppData\Local\Temp\... followed by something like ...\{2A3DF7FC-1693-4C53-8883-6CF09DED700D}\...
Vista: documents and settings\.....
3. You should find the install application files along with a file "Rom.zip" (40 to 90 Megs)
4. Extract the ROM.zip to your SDK Tools directory, where fastboot.exe resides
5. open command shell and navigate to your Tools directory (supposing SDK, adb and fastboot are installed)
On the Phone
6. Enter recovery console on phone (press "home" + then "on")
7. Do a nandroid backup
8. Select Wipe your phone
9. Hold "back" and select "reboot system" in recovery to enter Fastboot mode
On the PC
10. Type: "fastboot flash boot boot.img" .... wait to complete
11. Type: "fastboot flash system system.img" .... wait to complete
12. Type: "fastboot flash userdata userdata.img" .... wait to complete
13. [Optional] Type: "fastboot flash radio radio.img" .... wait to complete (note: some HTC radios locked windows mobile phones. I am not sure whether this applies for Android)
14. Reboot your phone
15. Keep the update if you like it, revert to backup via recovery and nandroid in case you don't
And sorry for any confusion caused...
Regards,
fde

Thanks a lot mate... I will try the official sense for my magic then using this method first =D...

Are you sure....
That this will work? I have made the RUU Flash: RUU_Sapphire_HTC_Europe_2.20.401.2_HTC_Nordic_release_signed_NoDriver
And that resulted in:
HBOOT-1-33-0014
CPLD-12
RADIO-3-22-23-18
I don't understand what you are meaning about the Radio.img file.
And what about the HBOOT file?

Yes it works. Just verfied it aigain. What the RUU package does is:
1. Extract the application to a temp file
2. Use ADB to flash the ROM to your phone
By the approach described in the first post, the application unpacks itself into a temp directory. This allows you to access the ROM-File which is stored as ROM.zip or something similar. By moving only the vital Boot, System and Userdata, you avoid flashing your Recovery console or Bootloader (Hboot).
It implies of course, that you DO NOT continue with the RUU application as soon as the first window becomes visible. (I will adjust the above Tutorial and make it simpler).

Problem
But the problem is that I allready have flashed my phone, is this the way to revert is så I can root it again and put custom roms on it again?

same here
ZeaDK said:
But the problem is that I allready have flashed my phone, is this the way to revert is så I can root it again and put custom roms on it again?
Click to expand...
Click to collapse
I also want to know how I can flash new ROM since people said that my spl is perfected after upgrading
I was learned that we need to use goldcard method to root again.
In our case, any idea which ROM to use as we gotta use higher ROM?
Or are we able to gain root access without touching the existing ROM?
Now even cannot boot to recovery mode.
So stupid to upgrade it although the ROM is stable and fast but no root access sucks.
any help would be appreciated.
thanks,
thihaz

Well I guess my post was too late then.
However, the GOLDCARD approach, is said to allow succesful flashing of the engineering SPL or 1.33.0009. Do that and your back in business.
Regards,
fde

feicher said:
Well I guess my post was too late then.
However, the GOLDCARD approach, is said to allow succesful flashing of the engineering SPL or 1.33.0009. Do that and your back in business.
Regards,
fde
Click to expand...
Click to collapse
The problem with the goldcard method is that you lose the roms as well...

Sir, would you please let me know how to flashing engineering SPL, right now i have HBoot-1.76.007 which shipped with the Singapore HTC sense rom.
BTW: i don't care i will lose the rom or not.
Many thanks!
I flashed using RUU_Sapphire_HTC_Asia_WWE_2.16.707.3_SG_release_signed_NoDriver.exe with golden card, but got "check main rom verion" error msg.
then flashed using RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_signed_NoDriver.exe with golden card, same error msg again.
I really have no idea how to flash back to engineering SPL, i'm stuck in Singapore HTC sense rom.
feicher said:
Well I guess my post was too late then.
However, the GOLDCARD approach, is said to allow succesful flashing of the engineering SPL or 1.33.0009. Do that and your back in business.
Regards,
fde
Click to expand...
Click to collapse

i got 1 rom.zip(11mb) & another one rom1.zip(89mb).
But both I also can't unzip. Any idea? Thanks.

radonsg said:
i got 1 rom.zip(11mb) & another one rom1.zip(89mb).
But both I also can't unzip. Any idea? Thanks.
Click to expand...
Click to collapse
I did this twice on a Swiss Update, which btw wasn't worth applying. Just by the Size it's rom1.zip.
Let me download the Singapore and see what I can do.... But then looking at the guys post it seems the second file in the post is what you need. Download this package and only flash boot, system and data in fastboot mode. (From Step 4. onward in the guide). Anyway I will have a look.

phygee said:
Sir, would you please let me know how to flashing engineering SPL, right now i have HBoot-1.76.007 which shipped with the Singapore HTC sense rom.
BTW: i don't care i will lose the rom or not.
Many thanks!
I flashed using RUU_Sapphire_HTC_Asia_WWE_2.16.707.3_SG_release_signed_NoDriver.exe with golden card, but got "check main rom verion" error msg.
then flashed using RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_signed_NoDriver.exe with golden card, same error msg again.
I really have no idea how to flash back to engineering SPL, i'm stuck in Singapore HTC sense rom.
Click to expand...
Click to collapse
Please follow the GOLDCARD method. I am not a recovery expert. I try to be cautious and was lucky until now (so I never tried it myself, but it is reported to work). Sorry for that. If :No-Frost: knows of a better guide with regard to GOLDCARD, please post!
Regards,
fde

feicher said:
Please follow the GOLDCARD method. I am not a recovery expert. I try to be cautious and was lucky until now (so I never tried it myself, but it is reported to work). Sorry for that. If :No-Frost: knows of a better guide with regard to GOLDCARD, please post!
Regards,
fde
Click to expand...
Click to collapse
For now the only method I know is the goldcard one... But in my country, using the goldcard method, makes the magics lose the 3g, edge or any internet mobile connection... =(...

Be careful, by using this method you can not upgrade to Snese UI (example TW). The reason being system image in Sense UI is larger than the previous 1.5 ROM system image, so system partition needs to be re-sized, which the RUU update does it for you. Otherwise you are struck with failed system image flashing.

signiture verifiaction fail
I get a signiture verifiaction fail when trying to write the .img files using fastboot. Any suggestions?

Stock 3.30.651.2 PC36IMG.ZIP Format

Phone: HTC Evo
Requirement: NAND unlock S-OFF (this allows for unsigned ROM)
Format: PC36IMG.ZIP
OS: 3.30.651.2 (2.6.32-15 Kernal)
Radio: 9.01
hboot: 2.02.0000
recovery: clockworkMod 2.5.0.1
WIMAX: 26023
PRI Version: 1.77_003
Wipes all user data: YES
Rooted: Yes
Link: http://www.megafileupload.com/en/file/278989/PC36IMG-zip.html
How to install: Download the file from the link above and and rename it from [Megafileupload]PC36IMG.zip to PC36IMG.zip. Place the file "PC36IMG.ZIP" file on the root of the SD-CARD. Power down the phone. Power up the phone while holding down the volume down button. The phone will prompt you to install a new rom, follow the prompts and reboot after flashing.
Purpose:
To create a current base rom to flash other roms without starting at the 1.47 PC36IMG.zip version.
Disclaimer: I am not responsible for any damage to your phone! Please do a nano backup prior to using this rom. This definately is a test rom, worked perfectly for myself, but not tested by anyone else. If you have any problems, boot into recovery and restore your nano backup.
Acknowledgments:
All the developers that have shared their hard work on XDA!
Note: You can unzip the file, remove the modules like ClockWorksMod or hboot then rezip the file as PC36IMG.zip to prevent those portions from being installed if you prefer.

I was just about to request this. Thanks!

Just to Clarify: (not that your directions weren't clear, just want to make sure there are no hiccups for anyone.)
The phone will scan for and find the image.
It will take a little while to load. Should have a blue status bar to the right.
Do you want to start update? Volume Up: Yes
Once it is finished: Do you want to reboot device? Volume Up: Yes

uberlemur let me know how it works for you. Like I said I only tested it on my phone. But I am confident that it will work, or I wouldn't have tried it on my own phone.
Karadorde, thanks for the more detailed instructions.

weidnerj said:
uberlemur let me know how it works for you. Like I said I only tested it on my phone. But I am confident that it will work, or I wouldn't have tried it on my own phone.
Karadorde, thanks for the more detailed instructions.
Click to expand...
Click to collapse
Yours were fine and it is pretty self explanatory, but I know doing things through HBoot can sometimes be daunting for those who have never tried it.

Just wanted to clarify if flashing this IMG with the .79 hboot will re lock Nand protection. I've used Toasts part 1&2 and yet skeptical about using unrevoked forever.

good stuff man!

Here is a picture of my Evo screen. I had used unrevoked forever prior to flashing the rom.

weidnerj said:
Here is a picture of my Evo screen. I had used unrevoked forever prior to flashing the rom.
Click to expand...
Click to collapse
The reason why I asked is that when rooting a new EVO,the radio, pri and wimax partitions get downgraded(using the traditional root method). With this, you can revert to the most current partitions all in a single flash including the Rom base instead of multiple flashes correct ??

You are correct, as long as you have ran the unrevoked forever to turn off the NAND unlock S-OFF prior to installing this ROM so that you can flash unsigned ROMs. This ROM has root built into it, so it would be just one step process to flash with this rom to have the latest of everything yet still have root.

mendez_v said:
Just wanted to clarify if flashing this IMG with the .79 hboot will re lock Nand protection. I've used Toasts part 1&2 and yet skeptical about using unrevoked forever.
Click to expand...
Click to collapse
Sounds like you will lose the Engineering HBOOT if you use this zip.

weidnerj said:
You are correct, as long as you have ran the unrevoked forever to turn off the NAND unlock S-OFF prior to installing this ROM so that you can flash unsigned ROMs. This ROM has root built into it, so it would be just one step process to flash with this rom to have the latest of everything yet still have root.
Click to expand...
Click to collapse
Thanks. My only question now is can I expect the same results if I obtained S-OFF through Toasts part 2, simple root or any other method other than unrevoked?

thanks
it worked

mobilemaniac said:
Sounds like you will lose the Engineering HBOOT if you use this zip.
Click to expand...
Click to collapse
Yep. Two different hboot.imgs. You can still take advantage of this information though. Keep your engineering bootloader but still update your radio, pri, etc.

noob here... in a bit of a bind
i did this update and it gave me this message
[5] BOOT Fail-pu
now the phone just goes to a back screen with green writing
ClockworkMod Recovery v2.5.0.1
what did i do?!?!?

peepeesea said:
noob here... in a bit of a bind
i did this update and it gave me this message
[5] BOOT Fail-pu
now the phone just goes to a back screen with green writing
ClockworkMod Recovery v2.5.0.1
what did i do?!?!?
Click to expand...
Click to collapse
Try it again.

Or if trying it again fails, you can boot into recovery and restore your nano backup. The part that failed is the system, but clockworkmod is still here.

weidnerj said:
uberlemur let me know how it works for you. Like I said I only tested it on my phone. But I am confident that it will work, or I wouldn't have tried it on my own phone.
Karadorde, thanks for the more detailed instructions.
Click to expand...
Click to collapse
The first time I tried I got a Fail-PU message for the boot partition. I'm pretty sure that's my phone's fault though, as the boot partition has been acting screwed up for days. (Not coincidentally, this is the reason I was looking for a complete PC36IMG.zip).
I flashed it a second time though, and all was well. Thanks again.

uberlemur thanks for the feedback.
Hopefully peepeesea was able to get it to work or able to restore the old nano backup...
So I guess that means that I have had 2 successful installations. LOL

will this work if you have Amon_RA recovery already?

Xoom bricked

Hi there everyone,
I have a huge problem. Last night i bricked my xoom. I was following a tutorial on this forum. and after unlocking the bootloader it told to flash a file called boot.img after doing so and typing fastboot reboot, the device wouldnt start behind the motorola logo. i tried allot of thing and also did flash some other stock android 4.0.4 boot.img files now with the last one mentioned i managed to get the xoom (wifi) to boot a little further. because the ripple movie with the motorola logo is shown. but it stucks at that movie.
Does anyone know if i can flash an image on the xoom that will atleast fix the problem of not rebooting so i can try another tutorial.
I have searched the internet for solutions, many of them linked to threads on this forum. but almost all download links in these tutorials are old and broken.
Can someone please help me unbrick my device? And maybe a link to a good working unroot tutorial for my xoom wifi with android 4.0.4.

Try get back to Stock.
Download from HERE
and do some OTA updates afterwards so everything will be up to date.
Then wipe and try again from scratch..
Worked for me perfectly just a few days ago.

If you can still get into fastboot, then its not bricked.
Get some stock images and flash them via fastboot and you'll be fine.

Cubanluke88 said:
If you can still get into fastboot, then its not bricked.
Get some stock images and flash them via fastboot and you'll be fine.
Click to expand...
Click to collapse
Indeed it worked. i downloaded the official images and flashed them im on android 3.0.1 again and all seems to work just fine now.
Next problem is i cant find a descent tutorial on this forum how to root the xoom. all download links are either removed due to copyright issues or the links are just broken.
How does it work actually?
1. I unlocked the boot loader wich is very easy.
but then? Do i need to flash a rooted image over the existing? i dont really understand how this works. I rooted my Desire HD with a good tutorial in minutes. Not many people seems to really know how to root the Xoom.
Also i would like to know if the different tutorials are for different android versions or can i aply all tutorials of rooting when i stay on android 3.0.1?
I also tried to flash a recovery.img to the recovery partition and press volume down 3 seconds after the moto logo apears but when i do i get an android robot with a big " ! " on his belly and it takes 5 minutes to load the menu. when im in it tells me there is no sdcard present when i try to flash a rooted rom (zip file).
Is there someone reading this thats willin to explain to me how to do a root the easiest way? Please if links are posted be sure everything on that thread is working. Im pretty sure i will pull it off with some push in the right direction.
Thank you!
(edit) omg im stupid, offcourse the sdcard wont work... it never worked at 3.0.1. on the xoom. can i follow this tutorial:
http://rootzwiki.com/topic/451-how-to-root-the-wifi-only-xoom-301/
Could someone read over it and see if this is a good tutorial? last time i flashed a boot.img the whole xoom got stuck... is that because i had the wrong boot.img on the wrong android version? or should boot.img always work?

Do you plan on flashing to a custom rom after rooting? If so, you can just skip rooting altogether.
I say this because I'm not particularly familiar with that rooting method you linked (though reading through it, it makes sense, all its doing is pushing the necessary files for root access to the xoom via adb). I used a rooting script flashed through a custom recovery over a year ago - unfortunately the download link seems to be broken (I might have a copy at home).
So there's a few things you can do:
1. If you just want a custom rom - download the rom zip file and store on your device. Flash TWRP (my preferred recovery) in fastboot. Boot into TWRP and flash the rom zip file.
2. If you want stock OS root access -
a) Follow those steps you linked and see what happens. If things go wrong, you should be able to just flash those stock images again.
b) Wait for me to get home and see if I have the root script. You'll need to flash a custom recovery though in order to use it.

Cubanluke88 said:
Do you plan on flashing to a custom rom after rooting? If so, you can just skip rooting altogether.
I say this because I'm not particularly familiar with that rooting method you linked (though reading through it, it makes sense, all its doing is pushing the necessary files for root access to the xoom via adb). I used a rooting script flashed through a custom recovery over a year ago - unfortunately the download link seems to be broken (I might have a copy at home).
So there's a few things you can do:
1. If you just want a custom rom - download the rom zip file and store on your device. Flash TWRP (my preferred recovery) in fastboot. Boot into TWRP and flash the rom zip file.
2. If you want stock OS root access -
a) Follow those steps you linked and see what happens. If things go wrong, you should be able to just flash those stock images again.
b) Wait for me to get home and see if I have the root script. You'll need to flash a custom recovery though in order to use it.
Click to expand...
Click to collapse
Ok thanks for your answer. Ill try to unroot with that method flashing directly to the recovery.img i also know now what i did wrong. i flashed the recovery.img not to the recovery partition but to the boot partition LOL. thats why the xoom didnt boot anymore
I see allot about Nightlies Eos, 4.1.1. is that a good rom? Does it look like the stock version?

eos 4.1.1 is simply awesome and its also pre rooted' so your bootloader is unlocked, all you gotta do now is install twrp recovery via fastboot ( my preffered recovery) then flash eos via recovery
Sent from my Xoom using XDA Premium App

sygys said:
Ok thanks for your answer. Ill try to unroot with that method flashing directly to the recovery.img i also know now what i did wrong. i flashed the recovery.img not to the recovery partition but to the boot partition LOL. thats why the xoom didnt boot anymore
I see allot about Nightlies Eos, 4.1.1. is that a good rom? Does it look like the stock version?
Click to expand...
Click to collapse
EOS is a pretty AOSP rom. No theme, though you can apply one if you like and change a few colors. There are various toggle additions you can add that make the user experience much better. It also comes with an overclockable kernel and is very very stable (despite being a nightly) The team has been supporting the Xoom for over a year and is very committed to the Xoom.
---------- Post added at 01:15 PM ---------- Previous post was at 01:11 PM ----------
sygys said:
Ok thanks for your answer. Ill try to unroot with that method flashing directly to the recovery.img i also know now what i did wrong. i flashed the recovery.img not to the recovery partition but to the boot partition LOL. thats why the xoom didnt boot anymore
I see allot about Nightlies Eos, 4.1.1. is that a good rom? Does it look like the stock version?
Click to expand...
Click to collapse
As for flashing, just gotta make sure your text is good before hitting the enter key. Recovery flash should look something like this:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Some instructions for flashing can be found here
While that page is specifically for locking and flashing to return to stock, the commands are universal for fastboot. Hell, if you wanted to, you could manually restore a nandroid backup via fastboot and flashing images.

[Q] [Solved] Noob Root Questions - Seeking Guidance

Hello all,
I know everyone hates people who post without searching the forums first, but I did and I am still very lost on what all I need to do to root my device and get going flashing ROMs with the new 2.20 Root Method.
I have used this thread to get me started (http://forum.xda-developers.com/showthread.php?t=1684382&highlight=root+guide) and I have already downloaded Android SDK from google + Platform-tools + Google USB Driver but I don't want to get going on root because in the instructions from 2.20 Root it states:
10. After unlocking the bootloader, you can flash a custom recovery partition via fastboot, boot into recovery mode, and use a recovery ADB shell or install from an update.zip to install Superuser and su (I do not provide support for custom recoveries, but this is a straightforward process that other people can help with).
I have searched the above linked thread and cannot determine how to generate a custom recovery partition (unless I did when I used the command "adb -backup all" in the platform-tools folder of the Android SDK..Furthermore, I do not know what "Superuser and su" is referencing.
If anyone could point me in the right direction, I dont mind doing the reading myself but I have gotten bogged down in the details. Basically, I want to save all of you the trouble of another noob who has bricked their phone because they didn't do their homework. Thanks all for your help!

TheEmpyre said:
Hello all,
I know everyone hates people who post without searching the forums first, but I did and I am still very lost on what all I need to do to root my device and get going flashing ROMs with the new 2.20 Root Method.
I have used this thread to get me started (http://forum.xda-developers.com/showthread.php?t=1684382&highlight=root+guide) and I have already downloaded Android SDK from google + Platform-tools + Google USB Driver but I don't want to get going on root because in the instructions from 2.20 Root it states:
10. After unlocking the bootloader, you can flash a custom recovery partition via fastboot, boot into recovery mode, and use a recovery ADB shell or install from an update.zip to install Superuser and su (I do not provide support for custom recoveries, but this is a straightforward process that other people can help with).
I have searched the above linked thread and cannot determine how to generate a custom recovery partition (unless I did when I used the command "adb -backup all" in the platform-tools folder of the Android SDK..Furthermore, I do not know what "Superuser and su" is referencing.
If anyone could point me in the right direction, I dont mind doing the reading myself but I have gotten bogged down in the details. Basically, I want to save all of you the trouble of another noob who has bricked their phone because they didn't do their homework. Thanks all for your help!
Click to expand...
Click to collapse
I second this request. I feel like there are loads of helpful threads but after searching for a long time I don't see anything that leads someone new to Android rooting from stock 2.2 to having something like CM10 on their device. All of the write-ups I've found assume more experience than I have. Is there a general guide somewhere that I'm missing? Maybe something that explains rooting, backing up, flashing, etc. from start to finish where we can replace "this is where you root your device" with the new rooting method? I'm assuming it's out there but I can't seem to find it anywhere.

TheEmpyre said:
I have searched the above linked thread and cannot determine how to generate a custom recovery partition
Click to expand...
Click to collapse
You don't need to "generate" anything, not sure where you got that terminology from. Just install Goomanager from the Play Store and use that to install TWRP recovery.
---------- Post added at 09:20 AM ---------- Previous post was at 09:12 AM ----------
TheEmpyre said:
Furthermore, I do not know what "Superuser and su" is referencing.
Click to expand...
Click to collapse
In plain terms a superuser = a root user. But when discussed here, it usually references the app that manages what other apps have root access.
Superuser is required to perform root functions.
You can obtain the app various ways, all discussed here: http://forum.xda-developers.com/showthread.php?t=1954361

TheEmpyre said:
Hello all,
I know everyone hates people who post without searching the forums first, but I did and I am still very lost on what all I need to do to root my device and get going flashing ROMs with the new 2.20 Root Method.
I have used this thread to get me started (http://forum.xda-developers.com/showthread.php?t=1684382&highlight=root+guide) and I have already downloaded Android SDK from google + Platform-tools + Google USB Driver but I don't want to get going on root because in the instructions from 2.20 Root it states:
10. After unlocking the bootloader, you can flash a custom recovery partition via fastboot, boot into recovery mode, and use a recovery ADB shell or install from an update.zip to install Superuser and su (I do not provide support for custom recoveries, but this is a straightforward process that other people can help with).
I have searched the above linked thread and cannot determine how to generate a custom recovery partition (unless I did when I used the command "adb -backup all" in the platform-tools folder of the Android SDK..Furthermore, I do not know what "Superuser and su" is referencing.
If anyone could point me in the right direction, I dont mind doing the reading myself but I have gotten bogged down in the details. Basically, I want to save all of you the trouble of another noob who has bricked their phone because they didn't do their homework. Thanks all for your help!
Click to expand...
Click to collapse
ctennenh said:
I second this request. I feel like there are loads of helpful threads but after searching for a long time I don't see anything that leads someone new to Android rooting from stock 2.2 to having something like CM10 on their device. All of the write-ups I've found assume more experience than I have. Is there a general guide somewhere that I'm missing? Maybe something that explains rooting, backing up, flashing, etc. from start to finish where we can replace "this is where you root your device" with the new rooting method? I'm assuming it's out there but I can't seem to find it anywhere.
Click to expand...
Click to collapse
They are many simple tutorials for rooting but do not know why you guys having hard time. Ok here is
1) You got Android SDK from google + Platform-tools + Google USB Driver -
2) Only for windows - Download htc sync ( It will install necessary htc drivers) - Link
3) Just to check if htc drivers installed properly , open "C:\android-sdk\platform-tools" ( Or folder where adb and fastboot exists) then "Press shift + right click and select "Open command window here" ( open command prompt and cd "folder where adb and fastboot exists).
4) In command window type " adb devices" and see output - If you get output then htc drivers installed properly.
You can skip step 3 and step 4 - These steps are only for verification
5) Goto [ROOT] HTC One X AT&T 2.20 Firmware - X-Factor root exploit and follow the instructions there.
6) Once you successfully root your device using above exploit then goto - [How To] Flash Custom recovery and ROMS after 2.20 root complete the steps to flash custom recovery and if you want to flash ROMS
7) To unlock BOOT LOADER use this link - [INDEX] AT&T/ROGERS One X Resources Compilation Roll-Up , follow the instructions under " BOOTLOADER UNLOCK, SUPER CID, AND S-OFF"
You can also goto this link - [ROOT][2.20] One XL Bootloader unlock & Root guide By XsMagical - Very nice tutorial, if you find above links difficult to follow
Note* : During exploit or flashing recovery they talk about using fastboot commands, In order to execute them you need goto C:\android-sdk\platform-tools" ( Or folder where adb and fastboot exists) then "Press shift + right click and select "Open command window here" ( open command prompt and cd "folder where adb and fastboot exists) and then execute the commands ..
Advice - Do not flash any roms apart from xda

Thank you, abhipati. I haven't seen any simple tutorials that are complete. Everything seems to assume the user knows how to do something mentioned in another thread, which in turn seems to assume something else. Your post seems like a very clear start-to-finish explanation. Maybe it should be made into a stickie in Q&A. I can surely handle step 1 but maybe that could be explained (or at least a link added to an appropriate thread).
If all this is out there somewhere already then I certainly didn't know where to find it. I appreciate your help.

ctennenh said:
Thank you, abhipati. I haven't seen any simple tutorials that are complete. Everything seems to assume the user knows how to do something mentioned in another thread, which in turn seems to assume something else. Your post seems like a very clear start-to-finish explanation. Maybe it should be made into a stickie in Q&A. I can surely handle step 1 but maybe that could be explained (or at least a link added to an appropriate thread).
If all this is out there somewhere already then I certainly didn't know where to find it. I appreciate your help.
Click to expand...
Click to collapse
No problem.
Regarding step 1)
1) Download Android SDK from here {For Windows}
2) Download java you need it - here

Thank you all for helping gather some resources for me that I know are up to date etc. - Thankfully I do know a few unix commands so that I can navigate the command prompt aspects...I'm sure these threads get annoying so thank you very much for getting a new-to-root user up and running. I'll try this all later this evening and throw an update to let you all know how it goes -- hopefully no "bricked my phone" thread in the future

Excellent I have successfully unlocked my bootloader and achieved perm-root! Now on to flashing roms and I have some questions:
1) I have read GuyIncognito's instructions here (http://forum.xda-developers.com/showthread.php?t=1952076) on Flashing ROMs and how to go about doing that and i fully understand the process but I want to confirm (Yes I Have TWRP recovery installed and running) I only need to extract the boot.img out of the winRAR file of the ROM that I downloaded? (CM10 seems to be popular so I'm starting with that as my first ROM) There are so many other files in the package and I'm wondering why do you only need the boot.img file to be present with your adb and fastboot files from the google dev SDK -- the boot.img is only 5 MB and I can hardly believe that it constitutes the whole OS?
2) How do I go about installing gapps after I have flashed my ROM? I have downloaded Gapps so I have the file...do I place it in my SD Card and then enter recovery to install it? or Do have to use adb to flash it
Edit: I also have Superuser app on my stock ROM right now
Any further help is much appreciated, thank you very much.

Boot.img is technically just the kernel, it's the heart of the OS you are installing. Once extracted, rezip rom. Flash boot.img first using fastboot command prompt. Then flash the Rom itself that you rezipped through twrp
You can easily just flash gapps through twrp.
Sent from my HTC One XL using xda premium

InflatedTitan said:
Boot.img is technically just the kernel, it's the heart of the OS you are installing. Once extracted, rezip rom. Flash boot.img first using fastboot command prompt. Then flash the Rom itself that you rezipped through twrp
You can easily just flash gapps through twrp.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Thanks for the reply, the community on XDA kicks a$$, doing some additional reading just plz tell me if I understand this correctly...
1) Copy CM10 zip and Gapps zip into phone storage
2) Follow GuyIncognito's instructions on flashing boot.img
3) Boot into recovery AFTER Flashing boot.img
4) Select "Install" in TWRP
5) Install CM10 zip First
6) Install Gapps zip next
7) Reboot
8) profit?

TheEmpyre said:
Excellent I have successfully unlocked my bootloader and achieved perm-root! Now on to flashing roms and I have some questions:
1) I have read GuyIncognito's instructions here (http://forum.xda-developers.com/showthread.php?t=1952076) on Flashing ROMs and how to go about doing that and i fully understand the process but I want to confirm (Yes I Have TWRP recovery installed and running) I only need to extract the boot.img out of the winRAR file of the ROM that I downloaded? (CM10 seems to be popular so I'm starting with that as my first ROM) There are so many other files in the package and I'm wondering why do you only need the boot.img file to be present with your adb and fastboot files from the google dev SDK -- the boot.img is only 5 MB and I can hardly believe that it constitutes the whole OS?
2) How do I go about installing gapps after I have flashed my ROM? I have downloaded Gapps so I have the file...do I place it in my SD Card and then enter recovery to install it? or Do have to use adb to flash it
Edit: I also have Superuser app on my stock ROM right now
Any further help is much appreciated, thank you very much.
Click to expand...
Click to collapse
follow his instructions and you'll be fine
flash the boot.img in flashboot, reboot in recovery, flash your nameofrom.zip, flash your gapps pkg just like the rom (on your sd card), enjoy...
---------- Post added at 08:48 PM ---------- Previous post was at 08:45 PM ----------
TheEmpyre said:
Thanks for the reply, the community on XDA kicks a$$, doing some additional reading just plz tell me if I understand this correctly...
1) Copy CM10 zip and Gapps zip into phone storage
2) Follow GuyIncognito's instructions on flashing boot.img
3) Boot into recovery AFTER Flashing boot.img
4) Select "Install" in TWRP
5) Install CM10 zip First
6) Install Gapps zip next
7) Reboot
8) profit?
Click to expand...
Click to collapse
yes that;s correct you may wanna backup your sd card 1st as well and do a full wipe before flashing the rom.

Just in case your not familiar with fastboot, the command is fastboot flash boot boot.img
Sent from my HTC One XL using xda premium

Crappyvate said:
follow his instructions and you'll be fine
flash the boot.img in flashboot, reboot in recovery, flash your nameofrom.zip, flash your gapps pkg just like the rom (on your sd card), enjoy...
Click to expand...
Click to collapse
By Flash do you mean using TWRP recovery "install" feature and selecting the CM10.zip I have in my SD Card, and gapps? Just making sure I dont have to do it via command prompt cuz then I may have to do some additional reading
Edit: Just saw you all beat me to it, thanks all, will get back to you after I am running a ROM *crossfingers*

TheEmpyre said:
By Flash do you mean using TWRP recovery "install" feature and selecting the CM10.zip I have in my SD Card, and gapps? Just making sure I dont have to do it via command prompt cuz then I may have to do some additional reading
Click to expand...
Click to collapse
yes install. you dont need to do it from command prompt, additional reading is always good
even though it was put together a while back this http://forum.xda-developers.com/showthread.php?t=1678308 is a very good guide and covers a lot of things of course you should absolutely start here in redpoint indispensable guide to all the resources available to one xl http://forum.xda-developers.com/showthread.php?t=1671237
happy flashing

Alright Looks like I successfully flashed CM10! I flashed gapps with it at the same time but I have run into a problem -- It keeps telling me that all these gapps processes have failed and I have no access to a keyboard! Do I have to reflash gapps?

Hmm ok I think I messed up here....
My phone was essentially non-functional with CM10 -- Nothing worked and it took me a while to navigate to enable USB Debugging on the given mod. One I enabled USB Debugging in CM10 I ran the following:
adb reboot recovery
Once I was in recovery, I Restored a backup of my device that I made BEFORE I obtained permanent root via the toolkit as it was recommended during this time to make a recovery.
Recovery worked successfully, now after reboot it hangs on the HTC screen and then goes black, then reboots again, and again, and again...
I haven't been able to use the volume down + power button to even get back into the bootloader.....hopefully I am not screwed here...Any suggestions?

TheEmpyre said:
Hmm ok I think I messed up here....
My phone was essentially non-functional with CM10 -- Nothing worked and it took me a while to navigate to enable USB Debugging on the given mod. One I enabled USB Debugging in CM10 I ran the following:
adb reboot recovery
Once I was in recovery, I Restored a backup of my device that I made BEFORE I obtained permanent root via the toolkit as it was recommended during this time to make a recovery.
Recovery worked successfully, now after reboot it hangs on the HTC screen and then goes black, then reboots again, and again, and again...
I haven't been able to use the volume down + power button to even get back into the bootloader.....hopefully I am not screwed here...Any suggestions?
Click to expand...
Click to collapse
I think u need to flash that backups boot IMG

omario8484 said:
I think u need to flash that backups boot IMG
Click to expand...
Click to collapse
Yes that would make sense, but the problem is A) How do I access that backup's .img file? B) How can I enter bootloader again? It won't let me using Power+Vol Down, no matter how long I hold it for --- unless I need to hold it longer?

You have to hold it till the buttons flash and goes black... Hold for about 2-3 more seconds and release the power button, but keep the volume down held until you get to a white hboot screen. (it'll have three skating droids)
Sent from my HTC One XL using xda premium

InflatedTitan said:
You have to hold it till the buttons flash and goes black... Hold for about 2-3 more seconds and release the power button, but keep the volume down held until you get to a white hboot screen. (it'll have three skating droids)
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Ok got it, did a factory reset then re-flashed CM10 boot.img...Flashed CM10 BY ITSELF this time, without doing gapps at the same time, rebooted into recovery after CM10 rolled up, then flashed gapps alone, everything is working smoothly! Now, time to restore my apps
Panicked momentarily, but now I'm back at it.
THANK YOU EVERYONE! Huge ups to all of you for helping a noob find his way

So now what can I upgrade my Stock ROM to?

Hello, I'm a noob at this so please be kind. I followed the below:
http://forum.xda-developers.com/tra...inners-guide-unlock-custom-rom-tf300-t3061648
I successfully:
Unlocked my TF300T's Bootloader
Installed custom recovery using fastboot
Rooted my tablet
Debloated the Tablet (Titanium Backup)
Backup up my current (OEM) SYSTEM ROM to microSD
So now I'm onto attempting a custom ROM. I'm a bit bored with 4.2.1 and would like to go to the same version of ROM my Note 7 has which is 6.0.1 Marshmallow or even try the new 7.0 Nougat.
I'm a little confused as to what ROM will or will not work. I see a few ROMS worth trying, but there install instructions reference a different Bootloader multiple flashes such as SuperSU or gapps.
Whats the best fool proof method to flash a new ROM with what I have and are there any simple one file ROM/ZIP/ Blob etc.. file that would do what I want?
Thank you.

broderp said:
Hello, I'm a noob at this so please be kind. I followed the below:
http://forum.xda-developers.com/tra...inners-guide-unlock-custom-rom-tf300-t3061648
I successfully:
Unlocked my TF300T's Bootloader
Installed custom recovery using fastboot
Rooted my tablet
Debloated the Tablet (Titanium Backup)
Backup up my current (OEM) SYSTEM ROM to microSD
So now I'm onto attempting a custom ROM. I'm a bit bored with 4.2.1 and would like to go to the same version of ROM my Note 7 has which is 6.0.1 Marshmallow or even try the new 7.0 Nougat.
I'm a little confused as to what ROM will or will not work. I see a few ROMS worth trying, but there install instructions reference a different Bootloader multiple flashes such as SuperSU or gapps.
Whats the best fool proof method to flash a new ROM with what I have and are there any simple one file ROM/ZIP/ Blob etc.. file that would do what I want?
Thank you.
Click to expand...
Click to collapse
Congratulations! Everything you did looks fine. So you are ready to install a custom rom. I would like to suggest one of the best: http://forum.xda-developers.com/transformer-tf300t/development/rom-t3453702 (You may follow up the tread and report there!)
Please take care very exactly on the installation instruction in post #1 given by Timduru. And don't forget that you need Kang TWRP [email protected] Download here: http://forum.xda-developers.com/transformer-tf300t/development/recovery-twrp-t3046479. That's mandatory!
Good luck!

ebonit said:
Congratulations! Everything you did looks fine. So you are ready to install a custom rom. I would like to suggest one of the best: http://forum.xda-developers.com/transformer-tf300t/development/rom-t3453702 (You may follow up the tread and report there!)
Please take care very exactly on the installation instruction in post #1 given by Timduru. And don't forget that you need Kang TWRP [email protected] Download here: http://forum.xda-developers.com/transformer-tf300t/development/recovery-twrp-t3046479. That's mandatory!
Good luck!
Click to expand...
Click to collapse
Thanks. As simple as the process was, as a noob (first time attempting this) I was really concerned about screwing this up and bricking my tablet.
The one you linked to was one of the ones I was considering and hence my question regarding what works with what I have already done. The noob mind (mine anyways) finds a dozen questions at every turn. In this case I would ask the following:
Q-Do I have to use Kang TWRP?
Q-How is it different than the TWRP I used on my Tablet?
Q-Will I need to constantly change TWRP versions depending on what ROM I want to use?
Q-Is there a danger to switching TWRPs?
Q-Doesn't flashing SuperSU after I flash Gapps overright and erase SuperSU or is there some unique way to flash (push?) both at the same time?
Q-Many more I'm sure!
To the noob, almost all the instructions I read appear to be written for someone who as done this many times. The level of detail needed for the novice is just not there or lost between the jargon used, with many steps not fleshed out because the author assumes a certain level of expertise.
I will definitely read these threads as best I can, but in the interim, is there any ROM that are known to be able to be flashed via the TWRP I currently have? The author of the version I used certainly made it seem like it was that simple, load the ROM/ zip file onto the MicroSD card and when in Custom recovery simply use the INSTALL feature to navigate to the file and press a button to flash and ..."BAM!!" you are running a new ROM.

ebonit said:
...
Please take care very exactly on the installation instruction in post #1 given by Timduru. And don't forget that you need Kang TWRP [email protected] Download here: http://forum.xda-developers.com/transformer-tf300t/development/recovery-twrp-t3046479. That's mandatory!
Good luck!
Click to expand...
Click to collapse
That version of KANG appears to be dead, as the thread has been closed and abondoned by the OP. So no new questions or help there....
Can I install that version over the top of my current version of TWRP the same way I did the first time? (change file to TWRP.blob etc.)

broderp said:
That version of KANG appears to be dead, as the thread has been closed and abondoned by the OP. So no new questions or help there....
Can I install that version over the top of my current version of TWRP the same way I did the first time? (change file to TWRP.blob etc.)
Click to expand...
Click to collapse
Please don't brick your tablet. First download Kang TWRP. It isn't dead. Try this https://www.androidfilehost.com/?fid=24052804347781183.

broderp said:
Can I install that version over the top of my current version of TWRP the same way I did the first time? (change file to TWRP.blob etc.)
Click to expand...
Click to collapse
Yes you can.
However Kang TWRP is a xxx.img file. You also can use your current TWRP and flash the image file. Attached you will find an image and a zip version.

ebonit said:
Please don't brick your tablet. First download Kang TWRP. It isn't dead. Try this https://www.androidfilehost.com/?fid=24052804347781183.
Click to expand...
Click to collapse
Sorry, bad choice of words on my part. By dead I meant that the thread was closed and I'm concerned getting answers would be harder as the OP was no longer actively looking there for questions.
ebonit said:
Yes you can.
However Kang TWRP is a xxx.img file. You also can use your current TWRP and flash the image file. Attached you will find an image and a zip version.
Click to expand...
Click to collapse
Ok, so if I read your comment correctly, I can copy the .img file to an SD card, boot into recovery and flash it from there OR I can fire up fastboot and the same steps I originally did to install custom recovery from my PC to accomplish the same thing... either way I should still have custom recovery, but with the KANG version. Right?
THANKS TO BOTH OF YOU FOR RESPONDING TO MY PREVIOUS POST. I appreciate the support.

Oh no....
Well crap. I put the .img file on my SD card and boot the tablet into recovery, I flashed the .img file to the rovery not boot partition. All appeared well....but when I go back to see if I have KANG recovery, it hangs anbd says Booting Failure Unrecoverable bootloader error (0x000000000)
EDIT: After I cleaned my pants, I used abd and fastboot to flash the original Blob file using my PC. This restored the custom recovery. I was freaking out for a few minutes.
I didn't change the file name of the kang .img file. Should I have done something different?
EDIT: Successful recovery to Kang2.8.7.2 !! :good::good: I used adb and my PC to send the .img file (renamed "twrpkang.img" for simplicity) and it worked great. I'm a pro..:silly:

broderp said:
Well crap. I put the .img file on my SD card and boot the tablet into recovery, I flashed the .img file to the rovery not boot partition. All appeared well....but when I go back to see if I have KANG recovery, it hangs anbd says Booting Failure Unrecoverable bootloader error (0x000000000)
Click to expand...
Click to collapse
Bad luck! Could you please describe what does it mean? : "I flashed the .img file to the rovery not boot partition."

ebonit said:
Bad luck! Could you please describe what does it mean? : "I flashed the .img file to the rovery not boot partition."
Click to expand...
Click to collapse
Not sure what I did wrong. I tried to do it within the old recovery menu and it hosed it. It found the file and mounted it successfully, but it seemed weird to be within the partition I was overwriting and writing to it. Kind of like you cant install windows while your using Windows...
The new version is much smoother.... Thanks, not to learn about this gapps super SU and how to flash all of these and in what order along with the ROM..as well as this wipe vs format thing...so confusing...