Database Info

Try this Toshiba BT stack and works... OK ....

But 2Mb... Just too big...
The following is the TXT flie included in this this...
I download it from russian site... I really wanna know where does it originally from....
-------------------------------
BT Stack for XDA II mini
Can run on Xda II Mini without change your MSBT
1. disable your MS BT (Don't need to remove it)
2. Download driver from Toshiba (Toshiba BT Stack)
http://aps.toshiba-tro.de/bluetooth/pages/disclaimer.php?dt=bts&download=4us
3. Connect your mini with active sync.
4. Install the driver.
5. Soft Reset your device.
Optional
6. Remove your MS BT
by deleting this registry key
[HKEY_LOCAL_MACHINE\Services\BTIcon]
then reboot.
If you don't wish to remove the key, you can disable it by editing this parameter value under the registry key
change
"Dll"="BTIcon_Dll.dll" to
"Dll"="BTIcon_Dll.dll.disabled"
then reboot. When WM2003SE tries to load the Dll driver, it can't find it and therefore the MS BT system tray icon will not be activated.

Does that stack include the A2DP profile?
Any improvements over the MS stack?

the question is, is it different from the official toshiba distribution? is it more stable? or is it the same game with bt going offline after turning the ppc off/on

Its the same
It still turns off bluetooth is standby/off mode.

TomTom Bluetooth GPS Ports WM5 Working Setup 100% Easy !

First of all I would like to say thank you to "thereaperman" from Modaco Frums for this great help ! I took this from him and making it accessible to this forum easily for others to use !
Here are his steps:
STEP 1 : INSTALL TOMTOM5
You do this by copying the CAB files from the CDROM (eg F:\PocketPC) to the K-JAM and launch one by one from there with the explorer of the K-JAM
.
You can install voices the same manner by copying the CAB files to the K-JAM (eg from F:\Voice on the CDROM)
STEP 2 : UPGRADE TO V5.1
EDIT: Please use the tomtom official site to obtain the update here
STEP 3 : ACTIVATE THE GPS CONTROL PANEL
Fire up a registry editor (eg http://www.freewareppc.com/utilities/phmregistryeditor.shtml )
Go to: HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
Add a DWORD called "Group" and give it the value of "2" (dec)
The GPS panel will now show up in your connection settings.
STEP 4 : INSTALL TOMTOM5
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In BT, select the OUTGOING port to 6.
3. In the GPS control panel, select the GPS program to 0 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 0 free. Select COM 0 and close TT5.
5. At the GPS control panel again, now select COM 6 (before we set it up at 0).
6. At BT: select OUTGOING port to 0.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
FOR THE WIZARD or IF NOT WORKING ON YOUR DEVICE TRY:
6. At BT: select OUTGOING port to WHATEVER NUMBER IS AVAILABLE EXCEPT 6.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and
CHANGE GPS BT PORT SETTINGS TO WHATEVER NUMBER YOU CHOSE IN STEP 6
it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
Hope this helps all of you !!!

On wich sdio gps device is this based on ?

thanks, i'll try this once i get my gps receiver

I'm having issues accessing the correct com ports for my ATOM to connect TomTom to satelites.
I load and can see the GPS, however when I try to pair the devices from TomTom I only have com ports 2, 3, 4, and 9 available, which my PDA will not connect to.

ActiveSync over BT, WM6, MS BT stack, XP and VISTA

Hello everibody! Since ~ 1 year i’m a heavy reader, but i’ve never posted before, since i could find all my answers just reading… 
But recently i bought a Universal wich i have unlocked and upgraded to WM6 – (Thanks thingonaspring, great ROM! ), and lost my AS connectivity (over BT). Kept on reading, but none of the provided solutions worked.
So, here is my 2 cents, hope, it will help for others too:
XP (from SP2!)
Basically, my problem was, that my Uni allowed as outgoing ports only COM0, 4 and 5. I use a really chep BT dongle from eBay wich came with Blue Soleil 1.x as driver and software, wich allows as incoming ports only COM11, 12. I’ve tried all of the Blue Soleil drivers wich i could find ont he net, even the most recent 5.x versions. None of them provided these ports to be opened.
My solution was thet i deleted all the custom Blue Soleil drivers, and let Windows to install his – generic – BT drivers. From here my problem was solved, since it doesn’t install any predefined ports, i can install them manually, as needed, and, since i know wich ports can be opened on my PDA as outgoing ports…
So, here are the steps from scratch:
1. Delete all BT related drivers, and let Windows recognize the New Hardware and install his Generic drivers for it, reboot if necessary.
2. Open My Bluetooth Places - Bluetooth Devices select COM Ports tab. Button, and we add port(s) til we reach the number we want (my case was COM4, so i’ve added ports 3 and 4, windows adds ports one by one, starting from the hardware ports. COM3 can be deleted aftrwards), as an Incoming Port. Ont he Options tab w eset this port as discoverable, save. Ok, now we have the necessary port, but we need an incoming connection too, ont hat port, so:
3. Start - Settings - Network Connections - New Connection Wizard.
4. The wizard starts, Next - Set up an advanced connection - Next - Connect directly to another computer - Next - Host - Next – we choose our port and save our settings, be careful, the PC should remain as dicoverable!.
5. Still not enough, our PDA would make now a Serial Port profile connection, but, we need AS to work, so:
6. Fire up ActiveSync, File - Connection Settings - Allow connections to one of the following - we choose our port, everything else is allowed and on Automatic. Save.
7. Ok, our PC is prepared, let’s see the Uni, it’s far more simple: at BT settings we pair our uni with the PC, and, as expected, we have an ActiveSync profile from the PC, wich we select.
8. ComPorts tab, New Outgoing Connection – we choose our port number (if it’s not there already), Save.
9. Start – Programs - ActiveSync - Menu - Connect via Bluetooth, and success, we can synchronise and we have network too!
On WinVista (i have Vista Ultimate installed):
as described above, with a few modifications:
- VISTA doesn’t recognize the hardware (at least mine isn’t recognised) , so it installs it as Unknown device. So, we have to „refresh” it’s „drivers” manually – we won’t let Windows to search for drivers, we select manually: Microsoft - Generic Bluetooth Radio, OK, now it finds the Microsoft Bluetooth Enumerator too.
- we don’t have to follow points 3 and 4.
- now we already can establish an AS connection, but, without network support. To enable this, we must select on our PC int he Microsoft Mobile Center – Mobile setting – connection settings NOT the Automatic connection, but the same as we have on our PDA at the Network connections, where it states „Programs that automatically connect to the internet should use… Usually My Work Network. The effect is immediate, we don’t have to restart anything.
- If i used VISTA, i didn’t had to add ont he PDA a new outgoing port (i didn’t have the possibility), but, it works without it.
One more observation: our PDA can have an AS connection over BT with only one PC, so, if we pair it with another PC, we loose our first pairing. So, it is advisable to leave our PC in discoverable mode.
Hope, somebody will find this useful.

A701-WWE-6.1.5.2.21109.1.6.0-R75-YouTube by ansar

Dear forum members,
Update for Speaker On fix during a call we can do this:
From Start\Task Manager\regedit we go to: HKLM\Drivers\Speaker
and we change the name value from SPK1: to WAV1:
I will also prepare and upload a small cab to do this registry update.
This is an R75 Rom for Mio A701: WWE-WM6.1-CE-OS-5.2.21109-Build-21109.1.6.0, Mobile Vista R75.
With this rom Mio A701 is capable among many new features to play YouTube videos.
The CE image is based on the Official WM6.1 CE OS 5.2.21109 ( Build 21109.1.6.0 ).
This R75 Rom Version is completely different than previous rom builds, so let see again the details:
1. Memory Management.
.. New memory and storage memory modules have been introduced that speed up all relevant operations and
.... increase the overall device performance.
.. These modules are to support both xip and sys parts of the rom and relevant registry settings are improved.
.. The registry parts i.e. default and user, are completely redesigned and expanded.
.. I believe that this rom is close to 95 percent of the rom of the htc tytn ii device.
2. Power Management.
.. New Power management service has been implemented
.. Backlight.cpl and Power.cpl modules are not redirected to the relevant *.exe in order for new languages to be displayed natively.
.. The backlight.cpl accepts 10 sec, 30sec, 1min, 2min, 3min, 4min and 5min on battery power.
.. All icons of AllInOne are working and one more are included in the icon tray.
.. The so long inactive green battery icon is now working and displays the backlight.cpl module.
... After flashing, as bellow is described, i tested for mane power off and resets and for some days up to now, and is working fine.
... From that icon we change screen's brightness immediately but do not change the backlight timeout.
.. The icon battery in the Task Bar top right is directed to the power.exe module.
... From this module the backlight timeout can be changed and take place immediately at 10sec, 30sec, 1min, 2min, 3min, 4min and 5min.
... Do not change the screen's brightness from this module cause this is vise versa in horizontal direction and a reset is needed for settings to be applied.
3. The Phone
.. Phone is fixed with the implementation of callserv.dll, tkitloader.dll 's and a small in code fix but lot of time to create it.
.. Now in Start\Programs you will see your providers menu lnk, for instance Vodafone Menu (*.lnk)
.. During first rom release it is reported that the fix works in all countries around the world.
.. In phone settings we see many new tabs at the bottom of the screen that allows many new functions.
.. In the last tab you can set automatic call receiving i.e. after 1, 2 or .. rings that is good when driving and bluetooth is enabled.
.. It seems that the radio rom download is possible so we may start cooking the radio rom too.
4. Calls Over Bluetooth.
.. When receiving a call we can activate the phone and voice with one (1) click on the bluetooth device multi task button.
.. After finishing our conversation, we can deactivate the phone again with one (1) click on multi task button.
.. This is valid with the first call only during a bluetooth session.
.. In the second and next calls it is a little tricky and undocumented. Please think of your safety first when driving a car.
.. With one click first we activate the phone receiving and next with a double (quick) click on multi task button we activate voice receiving.
.. Remember that after finishing our conversation, we apply a double click to deactivate voice and then a single click to deactivate the phone.
.. As previously said is safer when driving to enable automatic phone activation after desired number or rings and use a single clicks.
5. Audio Management.
.. All audio functions have been reworked and now you can play:
.. .aac, .3gp, .3g2, .3gpp, .m4a, .m4v, .mp3, .mp4, .wmv, .amr, .rmi, .rv, .ra .rm and .rma audio and video in windows media player.
.. Files with .rm , .rma, .rv and .ra requires Q8real.cab to be installed.
.. I am working for further development in order to include .avi and some more codecs.
.. If a .3gp file is not working in video or audio, you can rename it to .3gpp and test it.
.. The provided Audio Manager includes an audio booster and is required for A2DP stereo listening.
6. Blue Tooth wireless stereo.
.. Wireless Stereo has been reworked and the provided a2dp is almost lag/skip free.
.. It is required to cradle the device in mains power and set it from e-Utility to Super Performance or for no lag/skip with XCPUScalar to 624 MHZ.
.. It was tested with BB-02 wireless stereo head phone with very good results.
.. A2DP Toggle -1.1 of Teksoftco is provided in a cab with very good performance.
.. When driving please follow the rules and stop at the emergency lane when making or receiving a call.
7. Obex over Blue Tooth.
.. Obex File Transport is supported and you can send/receive files with btcrawler, total commander and fexplorer easily.
8. Blue Tooth over Activesync.
.. You can connect your device wireless and have control of all your windows and SD card files.
.. In order to connect we must enable advanced network functionality from Start\Settings\Connections\USB to PC.
.. There is a small procedure in Hacking and Development of how to, if you face a problem.
.. In short we first activesync our device with a USB cable connection and then over bluetooth.
9. WiFi/Wlan Management.
.. New functions and drivers are provided in order to speed up your file transfer operations.
.. I did not test them myself due to a new card delivery delays.
a. D3D drivers.
.. D3D drivers are tested and working as you can test it from Start\Programs\Apps with D3Ddemo, Lights3D and Text3D.
b. User Interfaces.
.. You can have the simple windows mobile, Htc Home, Htc Home Diamond and Manila 2D Sea Dragon interfaces.
.. In the provided VistaLibWWE21109MVR75 library all cabs can be installed manually as desired.
.. A special manual procedure is described bellow in order to have YouTube with the minimum cabs and maximum remaining program and storage space.
.. An SDConfig.txt file is provided with the a simple reset function or we can flash without the SD card in the slot.
c. Applications.
The applications included inside the rom and in the VistaLibWWE21109MVR75 library are as follows:
--- M2D R75
--- M2D Enhancements
--- Audio Manager
--- A2DP Settings
--- A2DP Toggle
--- Backup (Data)
--- Backup (PIM)
--- BtCrawler
--- Cell Broad Cast
--- Clear Temp
--- Clear Storage
--- CSD Line Type
--- Device Info
--- External GPS
--- Flash Player
--- Flight Mode
--- Google Maps
--- GPRS Configuration
--- GPRS Setting
--- HTC Album
--- HTC CommManager
--- HTC Opera
--- HTC YouTube
--- Inrenet Explorer
--- Java
--- Keyboard Skins
--- Location Call
--- Microphone AGC
--- Mio Calculator
--- MJ Configuration
--- Note Pad
--- Office Mobile
--- S2U2
--- Screen Capture
--- Soft Key
--- SRS WOW HD
--- Streaming Player
--- Task manager
--- TouchFlo
--- Total Commander
--- Traffic Message
--- VisualGPSce
--- Voice Speed Dial
--- WiFi Scanner
--- Windows Live
--- Windows Media Player
--- WkTask
--- Wlan Manager
--- XCPUScalar
--- YouTube
--- Finally many new services have been implemented from tytn ii successfully.
A. Screens of the New Mobile Vista R75
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
B. Download Links
Rapidshare: http://rapidshare.com/files/241287785/Mio_A701_WWE_WM6.1.21109.MobileVistaR75_by_ansar.zip
For installation instruction see next post
I hope you will fall in love again your precious Mio A701 that among few devices can explore YouTube.
Till next version enjoy!!!
Regards, ansar
_________________
Mio A701
UBoot R48
CE image CE OS 5.2.21109 Build 21109.1.6.0 D3D M2D Mobile Vista 4.00 SeaDragon
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a

C. Instructions to successfully flash the rom CE image
Here bellows are the instructions to successfully flash it.
Unzip the downloaded file: Mio_A701_WWE_WM6.1.21109.MobileVistaR75_by_ansar.zip
and in the created directory you will have the following:
1. This readme.txt file.
2. The VistaLibWWE21109MVR75 directory with the subdirectories:
3. The control text file SDConfig.txt of a single rest instruction.
4. The rom binary image Mio_A701_WWE_WM6.1.21109.MobileVistaR75_by_ansar.bin
Before flashing we make a backup of our files in Storage Card using the Data Backup Program or PIM Backup from my previous roms or your favorite backup.
In case you do not have a backup application install the Backup.cab (is PIMBackup) found in the VistaLibWWE21109MVR75 directory.
Use the same backup application you used to save your data in order to recover them after flashing.
Place the VistaLibWWE21109MVR75 dir and the SDConfig.txt file in the Storage Card and
flash the Mio_A701_WWE_WM6.1.21109.MobileVistaR75_by_ansar.bin image file as follows:
a. Enter Mio A701 in boot loader menu by pressing and holding Volume UP and then also pressing and holding the Power On button.
.... When led power on, release both buttons and press the navi down key in order to enter to boot loader.
.... Press Navi Down to go to FlashROM Upgrade by USB and press the central Navi key to select this sub menu.
.... Then press Navi Down to go to CE img By USB and press the central Navi key to select this option.
.... Wait to see the message Waiting for image...
b. Check that in a PC/Laptop have unchecked the Allow USB connections option before connecting.
.... Connect Mio A701 to a PC/Laptop with a usb cable.
.... In Windows Vista we must have the latest version of Windows Mobile Device Center, the Mio A701 Drivers and ScoterRomUpdate-R01.exe installed.
c. Place the Mio_A701_WWE_WM6.1.21109.MobileVistaR75_by_ansar.bin, run ScoterRomUpdate-R01.exe and follow the instructions.
d. After the successful flashing of the rom, in your device select exit, and then:
..... 1. if Uboot 48 is installed in the device, select the Enter Deepsleep option and then perform a Hard Reset.
....... Hard Reset is enabled by pressing and holding Volume Down key and then pressing the power button.
....... When a vibration is activated, release both keys.
..... 2. if not Uboot 48, select WatchDog reset.
e. Remember to tick again the Allow USB connections option in your PC in order to activesync by USB cable connection later on.
The Rom flashing process will perform as follows:
a. Loads all splash screens, performs the welcome screen and displays the initial Today screen.
b. Then loads Mobile_Vista theme and installs the cabs that reside in the rom.
c. Executes the reset instruction of SDConfig.txt and
d. Will finish after machine's final Reset and final boot.
e. The device displays the phone security pin entry procedure and after that enters in Mobile Windows today screen.
f. Now we start the manual cab installation exactly as follows:
... If not already, insert your Storage Card in the side slot and cradle your device to mains power due to the 10sec timeout and to preserve battery.
... With total commander we go to the Storage Card\VistaLibWWE21109MVR75 directory and select CabsToWindows directory.
... We find and double click on M2DR75.cab and perform installation in Windows. We reset device by side reset hole using stylus.
... We find and double click on StreamingMedia.cab and again perform installation in Windows. We reset device by click on OK.
... We find and double click on YouTube.cab and do as in previous line.
... We find and double click on R75Files.cab and again perform installation in Windows.
... We Power off the device and then power on again.
... Now everything will be working as designed.
... In order for the YouTube to connect and display we need:
... 1. The phone to be connected to our mobile operator
... 2. A fast ADSL line for internet connection and
... 3. To actvesync our device over bluetooth or wi-fi with a PC/Laptop.
... Welcome to the YouTube era with your device first among few devices, and not only.
... Other cabs from Storage Card\VistaLibWWE21109MVR75 directory are optional.
... YouTube needs 10MB free in order to run, so do not over cab your device.
... A good option is to install AudioManager.cab and XCPUScalar.cab for best Audio and extreme A2DP no skip functionality.
Note 1: The new keyboard layout has options for small and big letters
and it is predefined to initial setup of small letters.
Note 2: The key of Windows Player is assigned to Start Menu activation and
Note 3: The key of navigation is assigned to <OK/close> for better performance.
Note 4: Regedit (the one part of task manager) and Total Commander are assigned in the known inside touch keys.
Note 5: As you already noticed all screens (initial splash, windows welcome and AutoRun) are redesigned as well as
the Mobile_Vista.tsk theme, the Comm Manager, the Phone, the Audio Manager and the Streaming Media player.
Note 6: Internet explorer has two new home screens.
The first has help, IE Home, HTC Home and Xda Developers.
If you tap on IE Home the well known iexplorer home screen is seen.
When you tap on menu>tools>options you can set the current, IE home as home page.
You can always go back to the first page from menu>tools>options and setting use default.
Note 7: The well known SRS WOW HD driver is in the rom as package for enhanced HD sound.
Note 8: The bottom screen plug-in has eight small buttons where from left to right you can have:
- The hdspa (prestidge) icon
- The green for on off the phone
- The Gps ephemeris activation
- The memory
- The bluetooth
- The battery icon for the power.cpl
- The screen rotation button.
More icons can be seen as:
- If XCPUSCALAR is activated three icons are installed, for reset, suspend and xcpuscalar.
- If Task Manager is activated and minimized, a small icon of TM is also installed.
- When buetooth is activated an extra flashing bt icon is installed.
- When activesync over bluetooth is activated another icon is revealed.
Note 9: If Visual GPSce application is installed for Sirf or NMEA protocol then you can have
plenty of screens for almost any gps info. The bottom right flashing icon is green when fix is made
and can be blue when differential gps signal is received, depending on differential satellites found.
Note a: The S2U2 is redesigned and starts automatically when SDConfig.txt option is selected.
From Start>Programs>Apps>S2u2 Settings you can set up S2U2 when the cab is installed manually.
Note b: From Start>Programs>Apps you can test D3D drivers that can achieve more than 50 fps.
There are three apps as D3DMdemo, Lights3D and Text3D.
Note c: All cab files included in VistaLibWWE21109MVR75 dir can be installed also manually.
Regards, ansar
_________________
Mio A701
UBoot R48
CE image CE OS 5.2.21109 Build 21109.1.6.0 D3D M2D Mobile Vista 4.00 SeaDragon
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a

Hi,
The post is been updated with the Speaker On fix.
Regards, ansar
_________________
Mio A701
UBoot R48
CE image CE OS 5.2.21109 Build 21109.1.6.0 Mobile Vista 4.0 SeaDragon
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a

Do you really need to spam the forums with half a dozen threads? Put all the different language ROMs into the same one!

A701-FRE-21109-R75-UC-M2D-D3D-YouTube by ansar

Dear forum members,
Update for Speaker On fix during a call we can do this:
From Start\Task Manager\regedit we go to: HKLM\Drivers\Speaker
and we change the name value from SPK1: to WAV1:
I will also prepare and upload a small cab to do this registry update.
This is an R75 Rom for Mio A701: FRE-WM6.1-CE-OS-5.2.21109-Build-21109.1.6.0, Mobile Vista R75.
With this rom Mio A701 is capable among many new features to play YouTube videos.
The CE image is based on the Official WM6.1 CE OS 5.2.21109 ( Build 21109.1.6.0 ).
This R75 Rom Version is completely different than previous rom builds, so let see again the details:
1. Memory Management.
.. New memory and storage memory modules have been introduced that speed up all relevant operations and
.... increase the overall device performance.
.. These modules are to support both xip and sys parts of the rom and relevant registry settings are improved.
.. The registry parts i.e. default and user, are completely redesigned and expanded.
.. I believe that this rom is close to 95 percent of the rom of the htc tytn ii device.
2. Power Management.
.. New Power management service has been implemented
.. Backlight.cpl and Power.cpl modules are not redirected to the relevant *.exe in order for new languages to be displayed natively.
.. The backlight.cpl accepts 10 sec, 30sec, 1min, 2min, 3min, 4min and 5min on battery power.
.. All icons of AllInOne are working and one more are included in the icon tray.
.. The so long inactive green battery icon is now working and displays the backlight.cpl module.
... After flashing, as bellow is described, i tested for mane power off and resets and for some days up to now, and is working fine.
... From that icon we change screen's brightness immediately but do not change the backlight timeout.
.. The icon battery in the Task Bar top right is directed to the power.exe module.
... From this module the backlight timeout can be changed and take place immediately at 10sec, 30sec, 1min, 2min, 3min, 4min and 5min.
... Do not change the screen's brightness from this module cause this is vise versa in horizontal direction and a reset is needed for settings to be applied.
3. The Phone
.. Phone is fixed with the implementation of callserv.dll, tkitloader.dll 's and a small in code fix but lot of time to create it.
.. Now in Start\Programs you will see your providers menu lnk, for instance Vodafone Menu (*.lnk)
.. During first rom release it is reported that the fix works in all countries around the world.
.. In phone settings we see many new tabs at the bottom of the screen that allows many new functions.
.. In the last tab you can set automatic call receiving i.e. after 1, 2 or .. rings that is good when driving and bluetooth is enabled.
.. It seems that the radio rom download is possible so we may start cooking the radio rom too.
4. Calls Over Bluetooth.
.. When receiving a call we can activate the phone and voice with one (1) click on the bluetooth device multi task button.
.. After finishing our conversation, we can deactivate the phone again with one (1) click on multi task button.
.. This is valid with the first call only during a bluetooth session.
.. In the second and next calls it is a little tricky and undocumented. Please think of your safety first when driving a car.
.. With one click first we activate the phone receiving and next with a double (quick) click on multi task button we activate voice receiving.
.. Remember that after finishing our conversation, we apply a double click to deactivate voice and then a single click to deactivate the phone.
.. As previously said is safer when driving to enable automatic phone activation after desired number or rings and use a single clicks.
5. Audio Management.
.. All audio functions have been reworked and now you can play:
.. .aac, .3gp, .3g2, .3gpp, .m4a, .m4v, .mp3, .mp4, .wmv, .amr, .rmi, .rv, .ra .rm and .rma audio and video in windows media player.
.. Files with .rm , .rma, .rv and .ra requires Q8real.cab to be installed.
.. I am working for further development in order to include .avi and some more codecs.
.. If a .3gp file is not working in video or audio, you can rename it to .3gpp and test it.
.. The provided Audio Manager includes an audio booster and is required for A2DP stereo listening.
6. Blue Tooth wireless stereo.
.. Wireless Stereo has been reworked and the provided a2dp is almost lag/skip free.
.. It is required to cradle the device in mains power and set it from e-Utility to Super Performance or for no lag/skip with XCPUScalar to 624 MHZ.
.. It was tested with BB-02 wireless stereo head phone with very good results.
.. A2DP Toggle -1.1 of Teksoftco is provided in a cab with very good performance.
.. When driving please follow the rules and stop at the emergency lane when making or receiving a call.
7. Obex over Blue Tooth.
.. Obex File Transport is supported and you can send/receive files with btcrawler, total commander and fexplorer easily.
8. Blue Tooth over Activesync.
.. You can connect your device wireless and have control of all your windows and SD card files.
.. In order to connect we must enable advanced network functionality from Start\Settings\Connections\USB to PC.
.. There is a small procedure in Hacking and Development of how to, if you face a problem.
.. In short we first activesync our device with a USB cable connection and then over bluetooth.
9. WiFi/Wlan Management.
.. New functions and drivers are provided in order to speed up your file transfer operations.
.. I did not test them myself due to a new card delivery delays.
a. D3D drivers.
.. D3D drivers are tested and working as you can test it from Start\Programs\Apps with D3Ddemo, Lights3D and Text3D.
b. User Interfaces.
.. You can have the simple windows mobile, Htc Home, Htc Home Diamond and Manila 2D R75 interfaces.
.. In the provided VistaLibFRE21109MVR75 library all cabs can be installed manually as desired.
.. A special manual procedure is described bellow in order to have YouTube with the minimum cabs and maximum remaining program and storage space.
.. An SDConfig.txt file is provided with the a simple reset function or we can flash without the SD card in the slot.
c. Applications.
The applications included inside the rom and in the VistaLibFRE21109MVR75 library are as follows:
--- M2D R75
--- M2D Enhancements
--- Audio Manager
--- A2DP Settings
--- A2DP Toggle
--- Backup (Data)
--- Backup (PIM)
--- BtCrawler
--- Cell Broad Cast
--- Clear Temp
--- Clear Storage
--- CSD Line Type
--- Device Info
--- External GPS
--- Flash Player
--- Flight Mode
--- Google Maps
--- GPRS Configuration
--- GPRS Setting
--- HTC Album
--- HTC CommManager
--- HTC Opera
--- HTC YouTube
--- Inrenet Explorer
--- Java
--- Keyboard Skins
--- Location Call
--- Microphone AGC
--- Mio Calculator
--- MJ Configuration
--- Note Pad
--- Office Mobile
--- S2U2
--- Screen Capture
--- Soft Key
--- SRS WOW HD
--- Streaming Player
--- Task manager
--- TouchFlo
--- Total Commander
--- Traffic Message
--- VisualGPSce
--- Voice Speed Dial
--- WiFi Scanner
--- Windows Live
--- Windows Media Player
--- WkTask
--- Wlan Manager
--- XCPUScalar
--- YouTube
--- Finally many new services have been implemented from tytn ii successfully.
A. Screens of the New Mobile Vista R75
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
B. Download Links
Rapidshare: http://rapidshare.com/files/244042281/Mio_A701_FRE_WM6.1.21109.MobileVistaR75_by_ansar.zip
For Instructions to successfully flash the rom CE image see next post
I hope you will fall in love again your precious Mio A701 that among few devices can explore YouTube.
Till next version enjoy!!!
Regards, ansar
_________________
Mio A701
UBoot R48
CE image CE OS 5.2.21109 Build 21109.1.6.0 D3D M2D Mobile Vista 4.00 SeaDragon
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a

C. Instructions to successfully flash the rom CE image
Here bellows are the instructions to successfully flash it.
Unzip the downloaded file: Mio_A701_FRE_WM6.1.21109.MobileVistaR75_by_ansar.zip
and in the created directory you will have the following:
1. This readme.txt file.
2. The VistaLibFRE21109MVR75 directory with the subdirectories:
3. The control text file SDConfig.txt of a single rest instruction.
4. The rom binary image Mio_A701_FRE_WM6.1.21109.MobileVistaR75_by_ansar.bin
Before flashing we make a backup of our files in Storage Card using the Data Backup Program or PIM Backup from my previous roms or your favorite backup.
In case you do not have a backup application install the Backup.cab (is PIMBackup) found in the VistaLibFRE21109MVR75 directory.
Use the same backup application you used to save your data in order to recover them after flashing.
Place the VistaLibFRE21109MVR75 dir and the SDConfig.txt file in the Storage Card and
flash the Mio_A701_FRE_WM6.1.21109.MobileVistaR75_by_ansar.bin image file as follows:
a. Enter Mio A701 in boot loader menu by pressing and holding Volume UP and then also pressing and holding the Power On button.
.... When led power on, release both buttons and press the navi down key in order to enter to boot loader.
.... Press Navi Down to go to FlashROM Upgrade by USB and press the central Navi key to select this sub menu.
.... Then press Navi Down to go to CE img By USB and press the central Navi key to select this option.
.... Wait to see the message Waiting for image...
b. Check that in a PC/Laptop have unchecked the Allow USB connections option before connecting.
.... Connect Mio A701 to a PC/Laptop with a usb cable.
.... In Windows Vista we must have the latest version of Windows Mobile Device Center, the Mio A701 Drivers and ScoterRomUpdate-R01.exe installed.
c. Place the Mio_A701_FRE_WM6.1.21109.MobileVistaR75_by_ansar.bin, run ScoterRomUpdate-R01.exe and follow the instructions.
d. After the successful flashing of the rom, in your device select exit, and then:
..... 1. if Uboot 48 is installed in the device, select the Enter Deepsleep option and then perform a Hard Reset.
....... Hard Reset is enabled by pressing and holding Volume Down key and then pressing the power button.
....... When a vibration is activated, release both keys.
..... 2. if not Uboot 48, select WatchDog reset.
e. Remember to tick again the Allow USB connections option in your PC in order to activesync by USB cable connection later on.
The Rom flashing process will perform as follows:
a. Loads all splash screens, performs the welcome screen and displays the initial Today screen.
b. Then loads Mobile_Vista theme and installs the cabs that reside in the rom.
c. Executes the reset instruction of SDConfig.txt and
d. Will finish after machine's final Reset and final boot.
e. The device displays the phone security pin entry procedure and after that enters in Mobile Windows today screen.
f. Now we start the manual cab installation exactly as follows:
... If not already, insert your Storage Card in the side slot and cradle your device to mains power due to the 10sec timeout and to preserve battery.
... With total commander we go to the Storage Card\VistaLibFRE21109MVR75 directory and select CabsToWindows directory.
... We find and double click on M2DR75.cab and perform installation in Windows. We reset device by side reset hole using stylus.
... We find and double click on StreamingMedia.cab and again perform installation in Windows. We reset device by click on OK.
... We find and double click on YouTube.cab and do as in previous line.
... We find and double click on R75Files.cab and again perform installation in Windows.
... We Power off the device and then power on again.
... Now everything will be working as designed.
... In order for the YouTube to connect and display we need:
... 1. The phone to be connected to our mobile operator
... 2. A fast ADSL line for internet connection and
... 3. To actvesync our device over bluetooth or wi-fi with a PC/Laptop.
... Welcome to the YouTube era with your device first among few devices, and not only.
... Other cabs from Storage Card\VistaLibFRE21109MVR75 directory are optional.
... YouTube needs 10MB free in order to run, so do not over cab your device.
... A good option is to install AudioManager.cab and XCPUScalar.cab for best Audio and extreme A2DP no skip functionality.
Note 1: The new keyboard layout has options for small and big letters
and it is predefined to initial setup of small letters.
Note 2: The key of Windows Player is assigned to Start Menu activation and
Note 3: The key of navigation is assigned to <OK/close> for better performance.
Note 4: Regedit (the one part of task manager) and Total Commander are assigned in the known inside touch keys.
Note 5: As you already noticed all screens (initial splash, windows welcome and AutoRun) are redesigned as well as
the Mobile_Vista.tsk theme, the Comm Manager, the Phone, the Audio Manager and the Streaming Media player.
Note 6: Internet explorer has two new home screens.
The first has help, IE Home, HTC Home and Xda Developers.
If you tap on IE Home the well known iexplorer home screen is seen.
When you tap on menu>tools>options you can set the current, IE home as home page.
You can always go back to the first page from menu>tools>options and setting use default.
Note 7: The well known SRS WOW HD driver is in the rom as package for enhanced HD sound.
Note 8: The bottom screen plug-in has eight small buttons where from left to right you can have:
- The hdspa (prestidge) icon
- The green for on off the phone
- The Gps ephemeris activation
- The memory
- The bluetooth
- The battery icon for the power.cpl
- The screen rotation button.
More icons can be seen as:
- If XCPUSCALAR is activated three icons are installed, for reset, suspend and xcpuscalar.
- If Task Manager is activated and minimized, a small icon of TM is also installed.
- When buetooth is activated an extra flashing bt icon is installed.
- When activesync over bluetooth is activated another icon is revealed.
Note 9: If Visual GPSce application is installed for Sirf or NMEA protocol then you can have
plenty of screens for almost any gps info. The bottom right flashing icon is green when fix is made
and can be blue when differential gps signal is received, depending on differential satellites found.
Note a: The S2U2 is redesigned and starts automatically when SDConfig.txt option is selected.
From Start>Programs>Apps>S2u2 Settings you can set up S2U2 when the cab is installed manually.
Note b: From Start>Programs>Apps you can test D3D drivers that can achieve more than 50 fps.
There are three apps as D3DMdemo, Lights3D and Text3D.
Note c: All cab files included in VistaLibFRE21109MVR75 dir can be installed also manually.

Hi,
The post is been updated with the Speaker On fix.
Regards, ansar
_________________
Mio A701
UBoot R48
CE image CE OS 5.2.21109 Build 21109.1.6.0 Mobile Vista 4.0 SeaDragon
GSW 3.2.2_3.1.00.12 - SDK.003P1.01a