So here's my problem, I have a Herald with Wm6.5 working perfectly. However, I can't seem to add plugins like TitaniumWeather.
I tried to install TW several times, but it just doesn't appear at the homescreen. I did everything like I should (uncheck, install, check etc) but it still won't appear.
Can someone tell me how to fix this?
yes
Use any customizer for titanium like lpaso customizer, showaco customizer.. or titanizer... there you can enable and disable the plugins... or use the registry editor
Reg entry...
HKLM/Software/windows/chome/" and in every plug in you can see an entrie called enable set 1 enable or set 0 to disable it".
Related
I have couple of programs that run straight as exe files (putty, wmirc). Is there any way to add these to TF3D program page?
Also, just installed Coreplayer and tested with WMV files - I can hear sound but no picture...?
I got CorePlayer working, just needed to change it DirectDraw mode...
Other problem still persists
Diamond TF3D Config 0.6.7
Use TF3D Config, It does the job
You can also make shortcuts to "programs" folder using Resco Explorer (send to Start Menu as shortcut). Then they will be available in TF3D programs (to add as favorite).
Thanks, TF3D Config did the trick (and many others )
hi, I have two problems:
1. I have installed the last release of pocket cm my raphael, I can't do it the defaulr contact manager. I put the contacts shortcut as right softkey, but when I tap over it always run the default wm contacts.
2. my taskmanager is pbar, but, with manila, pbar detects an application runningall the time,the application name is Start. how cab I hide it? Can you tell me about a better taskmanager?
Thanks.
Ariel.
2. I use wktask and there is an option for this "always hide". If there is not such an option try wktask.
Friends,
I am almost done with my customization with Manila. Been using the hack apps out there for Diamond Concfig, Tweek etc..
One thing that I am not sure how to change is the home tab "contacts" to icontacts? I did this successfully with ssmapa.exe but it won't change in the home screen.
Please advise what registry edit is needed.
Thank You,
Tvos
nevermind, found it... for those intereted!
HKLM >>> software >>>> HTC >>> Manila
the left softkey path is : HomeLSKPath
and the name will be : HomeSLKText
the right softkey path is : HomeRSKPath
the text to appear will be : HomeRSKText
example the link to contacts is : windows\addrbook.lnk
and u can put this in HomeLSKPath and name test as CONTACTS
tvos
..or you can use Advanced Config (Key Mappings) ..or Diamond Tweak...both have option to change TF3D Soft keys
you didn't read what i posted earlier... icontact was not a option using the schaps or diamond tweek. i had to use the registry editor to change the file location to load..
tvos
Advanced Config has a search box for app not select box ..so you can put there whatever you want...I did it that way...
look at Menu > More Settings > Key Mapping in Advanced Config
question related to this.
how do i get it so that the people page's "all contact's" also goes to icontact.
i tried ssmapa but since the rom im using is a hd manilla port, ssmapa doesnt work proplery. know any work arounds?
edit~~nevermind figured it out.
to anybody else trying to get this to work:
make sure tf3d is disabled (go to settings->today and uncheck the box)
start up ssmapa and hit initiate
go to the poutlook.exe and change the new program to "\Program Files\iContact\iContact.exe"
arguments "$"
Working Dir to "\Program Files\iContact"
then check on the box 'patch enabled' hit save
then go to deply and hit deply patch.
turn tf3d back on and you're good to go =D
Backstory:
Installed a couple of custom clocks on my Sprint HTC Touch Pro through provided .cab files. Didn't like them.
Ran Diamond TF3D Config to restore default theme.
Start/Settings/System/Remove Programs showed the entries for the clocks.
Used "Remove". The Remove program reported that uninstallation was not complete. Asked if I wanted to remove the entries from the installed list.
Confirmed. After a soft reboot, the clocks still showed in the installed programs list.
Deleted the clock directories from \Windows\AppMgr.
Deleted the clock entries from HKLM\Software\Apps in the registry.
Tried to remove the clocks from the "Remove Programs" again. Same result.
At this point, searched the registry - there was not a single mention of the clocks.
Then searched the built-in and removable storage cards - same.
The clock entries still appeared in the installed program list.
SOLUTION:
1) Open MemMaid.
2) Use Jump To/Databases/Database Usage.
3) Scroll the list of database entries until you find SwMgmtMetadataStore. Select it and tap Browse.
4) Scroll the list (these are installed programs) until you find offending entries. Select an entry, tap Database/Delete Selected record.
This solves the problem.
Original thread:
http://social.microsoft.com/Forums/.../7bad6dc7-d042-4bc2-8516-c9eeaeb5af58/#page:3
The last post by Lemkus has the solution.
WHAT IS IT?
============
to cut a long story short: this is a simple toggler between Manila with MTP and Titanium
(or whatever you run on your standard Today Screen)
WHO I AM?
=========
nothing special to tell about me. i use this forum for a while now (with another profile)...
REQUIREMENTS:
==============
TF3D
MTP
HOW THIS WORKS:
================
This program is a simple Manila toggler with support for Manila Today Page.
Basically its written in MortScript.
So this is what happens by installing:
The Installer looks for an existing autostart link from MTP (MTPLoaderStartup.lnk) in windows startup folder and moves it to its program directory (it will be restored when unistalling the toggler).
A new autostart shortcut is placed in startup folder (FixedMTPLoaderStartup.lnk).
It starts a small "wrapper" that checks for an activated manila in registry. If manila is activated the "old" MTPLoaderStartup will be executed, otherwise nothing happens
I coded this to get rid of the annoying message "Manila not found" when loading MTP with deactivated Manila on startup.
A new Shortcut "Toggle ManilaMTP" will be generated in your Programs folder.
Now you can easily switch between Manila with enabled MTP and your Standard-TodayScreen with Titanium.
WHY ANOTHER TOGGLER? THERE ARE SO MANY OUT THERE?
==================================================
well, i havent found one that does exactly what i want, so i wrote my own
the problem was, when doing a soft reset with disabled manila, the MTPLoader popped up with an error message saying that manila isnt active. so i wrote a small "wrapper" that checks for an activated manila in registry and only runs MTPLoader if Manila is active.
The toggler starts MTPLoader only when needed (when switching to manila) and unloads it automatically when switching back to Today Screen.
WHY SHOULD I INSTALL MTP BESIDE USING THE STANDART HOMESCREEN?
===============================================================
MTP doesnt support ALL Today Plugins (yet)
some of us want to use Titanium AND Manila but still need some Today Plugins that wont show up on titanium-
havent tried that yet, but it might be possible to use this for MobileShell, too (if it doesnt work will try to adapt that if someone asks for it)
OK, LETS GET STARTED
INSTALL:
Download MTP from here if you dont have it already
Install MTP (Follow the Instructions from the thread)
Quote:
Setup Instructions:
1) Setup MTPInstall.CAB to Main memory
2) Go to programs menu, run MTP Configurator.
3) Choose page to host plug-ins, choose plug-ins you want to enable. Uncheck "TouchFLO 3D".
4) Click apply button. Close configurator.
5) Go Settings-> Today Disable TouchFlo3D. Click OK. Enable TouchFlo3D. Click OK.
5) Run MTPLoader
6) Selected plug-ins should appear on selected tab.
Download TH_ManilaMTP_Toggler.cab
Install the cab to Main memory
Soft-Reset
Use the new Shortcut to toggle
UNINSTALL:
You can easily uninstall the programm via settings -> system -> remove programs.
the unistall routine asks you to restore the MTPLoaderStartup.lnk.
if you want to keep MTP and restore its AutoStart function choose "Yes".
Happy toggling
Questions, Bugs, etc
Reserved for Questions, Bugs, etc.
very nice .
Hi Any screenshot? Thanks in advance
radiowc said:
Hi Any screenshot? Thanks in advance
Click to expand...
Click to collapse
no, im sorry. i dont have any screenshots... but theres nothing to take a screenshot from
the only thing that is changed by this script is an additional shortcut in startmenu. manila (tf3d) looks still like manila, mtp like mtp and titanium like titanium...
How is this different from Touchflo Detatcher?
Nagrom Nniuq said:
How is this different from Touchflo Detatcher?
Click to expand...
Click to collapse
well the main part thats different is the "support" of mtp.
i cant remember that but as far as i know with touchflo detacher tf3d is in memory all the time. here it is completely closed not consuming any memory or cpu and manila today page is handled that way too.
and of course the biggest difference is that this toogler is basically just a mortscript and tf detacher is a "real" programm...
Ah k, cool.
could this work to switch between Titanium (6.5 rom) and Mobile Shell 3?
ArmageddonAsh said:
could this work to switch between Titanium (6.5 rom) and Mobile Shell 3?
Click to expand...
Click to collapse
i'll add an updated version this weekend.
have to install mobile shell and find out the mobile shell processes and startup script first.
JUST A SMALL UPDATE TO PREVIOUS POST:
maybe it will take 2 or three days more for the next version.
having some problems with the toggler at the moment.
next version will have a lot more features
a short preview what will come:
switch to manila (tf3d)
switch to titanium (windows default)
switch to mobileshell; hide mobileshell; show mobileshell
new loader for mobileshell
smart toggling between all 3 (if installed) or only 2 if mobileshell isnt installed (determined automatically)
soft-reset
rotatescreen 90 degrees (shortcut)
rotatescreen 270 degrees (shortcut)
rotatescreen all views with menu
and (i hope i could finish this) a big tweak package
thinking about a wifi, bt, radio toggler too
hi .hEiMDaLL.,
any progress in your work yet? Are you working on an update for your uesefull app? Please give us a short info...