Database Info

Programming/Development question

I hope this doesn't get lost in the sea of other questions.
Im working on a little program for my Visual Basic 08 class. Im going a bit further with it and making a windows mobile version of it. (currently using the WinMo 5 SDK) The program works fine in the windows platform, however when i copied the code over to the WinMo version, there was a few issues with the code. Most of it i manage to find the new syntax for and get it working on the WinMo emulator, however there is one problem that persists. TabControl.focus. This function does not seem to work in the WinMo development. Any Code i input that looks for what tab has focus, is ignored, like it doesn't know to look for the focus. Here is what im trying to do.
I have a program, with 2 tabs, and one button. I need that one button to execute two separate code blocks, depending on which tab is active. However i cannot get it to recognize, or do not know the proper function to get it to see which tab has focus, and execute the proper code accordingly.
Now, the simple fix for this would to just make another button, and place one each inside the tab, but i wanted to avoid that for as much as possible, and since it workers fine on the windows end, i know there has to be a way to get it working on the winmo end. By the way, im doing this in VB because im learning VB for a class, and the more coding practice i get the better ill do in class. Im sure there is a better way to do this in C# or whatever else.
Anyone know the workaround for this?
Im currently using Visual Studio 2008 Pro with the WinMo 5.0 SDK.

Your two tab pages are already part of a tabcontrol object. Use that to find the active tab with its property tabControl1.SelectedIndex This will return a zero based index integer for each tab paged attached to it. The object names used here are the default ones created by the IDE
Sorry, I only code in c#, but the VB code will be almost identical.
In the code for the button click event -
if(tabControl1.SelectedIndex == 0)
{
// tabPage1 active
}
else
{
// tabpage2 active
}
c sharp's double equals is the same as VB's single equals, in the sense that it means 'is equal to'.

There is not "active" property in vb (atleast not in vb mobile code) so that doesnt work
Im somewhat fimiular with c++, so i can atleaast understand the code when you put it in C format, but i have a bit of trouble converting C code to vb format. In this case, in normal (non-mobile) the .focus would be enough to make it work...
Here is what i tryed to make work..
Code:
'Changes what the "Roll" button does depending on which program tab is selected.
Select Case True
Case xTabPageCombatRoll.Focus
Call RollCombat()
Case xTabPageRandomRoll.Focus
Call RollRandom()
Case Else
MessageBox.Show("The Tab Control code didnt work")
End Select
both tab pages are part of xTabPageCombatRoll object

I'd suggest asking Development questions in the Dev&Hack section.
(yes, new rules)

Here's the screen shot and the c# application to go with it. Its in VS2005 but VS2008 will open it and convert the solution and project files to 2008 format. Once that happens VS2005 will not be able to open it.
The lines starting // in the code in the previous post above are comments. Same as VB's ;

thanks steph, i have 2005 installed along with 2008 so i just ran 05 . That code does work. But i still cant find anyway to translate that into VB (as .SelectedIndex is not valid in VB code)
ugh.. the more i work with VB the more i like C based code. But im in a VB class so im trying to keep doing stuff in VB so i can pass the class.

SelectedIndex is a property of the TabControl, a .NET framework object It does not matter which language you use to access it. VB, C#, C++, take your pick .
To prove the point here is the same project in VB. I had had to do this on another machine, as I only have C++ and C# installed on this one.
It only had the WM 2003 SDK on it. If your machine has the .NET CF 2.0 the .EXE should work, if you drop it on your device.
Another trick is to use Red Gate's .NET Reflector. If you point it at the original exe generated by the C# project in the previous post above, it decompiles it in C# as
Code:
private void button1_Click(object sender, EventArgs e)
{
switch (this.tabControl1.SelectedIndex)
{
case 0:
this.label1.Text = "Page1 is active";
break;
case 1:
this.label1.Text = "Page2 is active";
break;
}
}
If you decompile it as VB instead you get :
Code:
Private Sub button1_Click(ByVal sender As Object, ByVal e As EventArgs)
Select Case Me.tabControl1.SelectedIndex
Case 0
Me.label1.Text = "Page1 is active"
Exit Select
Case 1
Me.label1.Text = "Page2 is active"
Exit Select
End Select
End Sub

Ahh..
I got it to work now.. My problem was i wasnt specificly using Case 0 and Case 1, but instead using Case Tabpage1, and Case Tabpage2, which wasn't working.
Thank you VERRRY much.. The program is working like it should now and it makes me verry happy

[Q] web app

Hello,
I dont know if the title fits, so i gonna explain my Problem.
I want to Programm a Game With User Login. Sadly wp7 doesnt Support SQL api, so i cant make the User Management directly over sql.
So i got a Website with a working Login Formular. I want to link the wp7 textboxes with the textboxes of the Website which works with SQL.
Is there a simple way to get this working? Or does anyone have a better idea to get my User Management working?
Greatings win99
Sent from my HD2 using Board Express

Hmm... I can only suggest you to learn how to do http requests (and general programming of course). I hope u'll stop thinking in terms like "linking textboxes"

yeah, "linking" is maybe the wrong word
What exactly do you mean with "http request"?
I can program a bit html an php, which i could include in a "WebBrowser" control. This way i could use php with mysql, but i don't want to make a browser game.
Is there somethink like a "http database"? Cause i don't know yet any database based on http. And is there an API availible to do this requests from a panorama app?
Sorry for this basicly questions, but i'm just a hobby programmer and since now i just programme windows desktop projects, where i could easily use SQL.

Your "very basic question" requires a very long answer (sorry, but I don't have enough time. Also, I'm not an expert in SQL http communication). FYI, all communications between web page (and you can treat your WP7 page as a web page) and SQL server based on HTTP POST requests (but of course not on "linked textboxes"! ). So, try to google with words such as "WP7 SQL HTTP POST" - first five links possible will have all info you need (but you should understand "how everything works" first!)

ok, if i understand it correctly, this sound like instead of using "app<->SQL" i should use "appy<->http<->sql".
i will try to find some good tutorials and reply on success/ no success.

win98 said:
ok, if i understand it correctly, this sound like instead of using "app<->SQL" i should use "appy<->http<->sql".
i will try to find some good tutorials and reply on success/ no success.
Click to expand...
Click to collapse
Well, from the sounds of it, I am going to assume you networking and web API knowledge and maybe decent enough MySQL/SQL/Database knowledge, and possibly somewhat new to WP7 C#.NET (Don't take this personal or a lashing towards you, not the case, I mention it so I can be basic and to the point without assuming you know what references I make or offend you).
If you want an "out-of-the-box" easy solution, let's stop and go download RestSharp (http://restsharp.org). After you get it, visit: https://github.com/restsharp/RestSharp/wiki/Getting-Started, as this will give you a great example of HOWTO use this solution.
You also need to remember about the footprint, a 90MB limit (Max) on 256MB phones. Too big can cause some issues.
Also, another good option is SQLlite, probably one of the most popular, straight forward and well respected (I even use it on some projects). Should you choose to use it, go to http://sviluppomobile.blogspot.com/2010/07/wp7-sqliteclient-preview.html and read his Blog post, VERY informative and a Sample available for you to learn from as well.
If you really wanted to do this yourself, you could create an HTML page and do all your coding in it (e.g. Login Box) and use JavaScript as well, this way you grab the contents from your textbox(s) and send to the embedded web browser you load the HTML page in, hence scripting is available for WP7 but must enable scripting support and highly recommend to use IsolatedStorage and can invoke JS just as easy as:
window.external.notify("(Task)Param)");
So this should hopefully get you to where you want to be but if any of the above statement I made was true, I recommend out-of-the-box solutions for you.
Thanks,
Lance

lseidman said:
If you really wanted to do this yourself, you could create an HTML page and do all your coding in it (e.g. Login Box) and use JavaScript as well, this way you grab the contents from your textbox(s) and send to the embedded web browser you load the HTML page in, hence scripting is available for WP7 but must enable scripting support and highly recommend to use IsolatedStorage and can invoke JS just as easy as:
window.external.notify("(Task)Param)");
Click to expand...
Click to collapse
This is the way i planned to do it. How do you call it? For me it is hard to find a tutorial or book or something like that, cause i don't know which keyword to google
thanks anyway

win98 said:
This is the way i planned to do it. How do you call it? For me it is hard to find a tutorial or book or something like that, cause i don't know which keyword to google
thanks anyway
Click to expand...
Click to collapse
First and foremost, I appreciate your honesty which is why I will basically show you the way...
Well, if you wish to invoke JavaScript via WP7 you can, like below:
1). Open your Mainpage.xaml and find the grid and insert:
<phone:WebBrowser HorizontalAlignment="Left" Name="webBrowser1" VerticalAlignment="Top" Height="xxx" Width="xxx" IsScriptEnabled="True" ScriptNotify="webBrowser_callback" />
2). Make an HTML page, go in the HEADER section and type something like: "<SCRIPT LANGUAGE="JavaScript" src="HelloWorld.js"></SCRIPT>" and add a button that has a function to fire upon clicking + name the section like:
<h1 id='myName'>Hello World!</h1>
<form>
<input id="button" type="button" class="button-standard" style="width:200;height:100" value="Hello World!" onClick="HelloWorld()"/>
* Remove the Quotes from above...
3). Make a file called HelloWorld.js and put in something like:
function HelloWorld() {
window.external.Notify("Name");
}
function sets(val) {
document.getElementById('myName').innerHTML = val;
}
4). In your Mainpage.xaml.cs, find where you want to invoke the script/site and put in:
webBrowser1.Navigate(new Uri("http://lance.compulsivetech.biz/login", UriKind.Relative));
*Change the URI to your address, not my blog's fake login...
5). Since we are loading the site locally in Isolated Storage, go forth and type this in:
private void CreateDirOnStore(string strDir)
{
// Create a directory for local storeage.
IsolatedStorageFile isoStore = IsolatedStorageFile.GetUserStoreForApplication();
if (!isoStore.DirectoryExists(strDir))
isoStore.CreateDirectory(strDir);
}
private void SaveFileToIsoStore(string strFileName)
{
// This will save the file to the isolated storage based on the string provided.
IsolatedStorageFile isoStore = IsolatedStorageFile.GetUserStoreForApplication();
//remove the file if exists to allow each run to independently write to
// the Isolated Storage
if (isoStore.FileExists(strFileName) == true)
{
isoStore.DeleteFile(strFileName);
}
StreamResourceInfo sr = Application.GetResourceStream(new Uri(strFileName, UriKind.Relative));
using (BinaryReader br = new BinaryReader(sr.Stream))
{
byte[] data = br.ReadBytes((int)sr.Stream.Length);
//save file to Isolated Storage
using (BinaryWriter bw = new BinaryWriter(isoStore.CreateFile(strFileName)))
{
bw.Write(data);
bw.Close();
}
}
}
6). In your public MainPage() put:
this.Loaded += new RoutedEventHandler(Load_WebPage);
* Always put stuff after your Intialize call
7). We need to make a page load function as below (in xaml.cs):
void Load_WebPage(object sender, RoutedEventArgs e)
{
//Set the start folder of the widget and navigate to the start page
CreateDirOnStore("helloworld");
SaveFileToIsoStore("helloworld/index.html");
SaveFileToIsoStore("helloworld/helloworld.js");
webBrowser1.Base = "helloworld";
webBrowser1.Navigate(new Uri("index.html", UriKind.Relative));
}
8). Now we invoke the function as seen below:
void webBrowser_callback(object sender, NotifyEventArgs e)
{
//Use invokeScript to give to the web env.
webBrowser1.InvokeScript("eval", new string[] { "sets('txtName.Text')"});
}
Hope this helps, this is basically off the top of my head but should be pretty close to being right and Mango Compat.

Creating a WCF services that calls SQL will be the quickest way...about 30 minutes.

Link contact adress to Nokia Drive

I use my7rom on my Omnia 7.
Is there anyway to link a contacts adress to Nokia Drive instead of Maps (stock wp7 app). It would be much more practical if Nokia Drive opened a navigation session instead.
Anyone up for the challenge? A reg-tweak perhaps?
// Manneman
Skickat från Windows Phone 7.8

There's two parts here. The first is identifying the correct "filetype" or URI scheme that is used for navigation. That shouldn't be too hard; a little digging in HKCU should reveal it. We already know about ones like callto: and http: and I'm actually (slowly) working on an app to allow people to easily change them. The second part is finding the correct command to load that address or route in the Nokia Maps app. If the app supports pinning routes or destinations to Start, this is probably possible. If not, it may not be possible in the app. Most apps aren't designed to accept command-line parameters, so even if you make them the default handler for a given filetype or URI scheme, they ignore the value you send them and just start as though launched from Start.

GoodDayToDie said:
If the app supports pinning routes or destinations to Start, this is probably possible.
Click to expand...
Click to collapse
Nokia Drive supports pinning to start so it should be possible. Unfortunately I can't tell you exact command line parameters 'cause my Lumia 900 still "in jail"

Let me see if I have a copy of the Nokia Drive XAP handy. I'll need to decompile it to figure out the correct parameters for launching it with the intent of navigating to a specific location. Note also that this might not be possible directly - for example, the app might store a list of locations internally, and the tiles only provide an index into that list rather than providing the location directly - but that just requires another layer of indirection.
In that case, you create an app that gets registered as the navigation handler, and in response to a navigation request, it writes the requested location into the Nokia Drive app and then chain-launches Nokia Drive with the index of the newly written location. That's just an example of one way that this might go wrong, but overall, the odds are actually pretty good. Obviously, all of this will require, at a minimum, write access to the HKCR hive in the registry.

Ah, guys! You are so kind helping me out. I´m really certain alot of members in the WP7 section would love for this to work!
// Manneman

GoodDayToDie said:
I'll need to decompile it to figure out the correct parameters for launching it with the intent of navigating to a specific location
Click to expand...
Click to collapse
GoodDayToDie, you may try much simpler solution. Just create assembly (dll) to show startup parameters in message box, and replace main Nokia Drive dll (but pin some location first).

That's actually harder than it sounds; even if the app is sideloaded (which would mean I already have the DLL) my fake would have to mimic the internal structure of the real app to a degree (namespaces, class names, default actions, etc.). That's not hard, but decompiling .NET is pretty trivial too.

AFAIR, Nokia Drive is obfuscated (but I'm not 100% sure). Also, you don't need to duplicate all names and structures; just a stuff mentioned in WMAppManifest (I hope so). BTW, I forgot: I still have unlocked handset; if I'll found time, will try today later.
Update: tried but without of luck What I did:
- installed Nokia Drive first;
- downloaded map and pinned current location;
- created fake app with same app guid and namespace name ("Drive"), and performed app update (that operation completely override whole solution but NokiaDrive tile still pinned to the start screen);
- tried a few different page names (_default.xaml, QuickStartPage.xaml, DestinationPickerPage.xaml, FavoritesPage.xaml) with code
Code:
protected override void OnNavigatedTo(System.Windows.Navigation.NavigationEventArgs e)
{
MessageBox.Show("Hello from fake dll");
if (e.NavigationMode == System.Windows.Navigation.NavigationMode.New)
{
string[] keys = NavigationContext.QueryString.Keys.ToArray();
string[] values = NavigationContext.QueryString.Values.ToArray();
string param = "";
for (int i = 0; i < keys.Length; i++)
{
param += keys[i] + " -> " + values[i] + "\n";
}
MessageBox.Show("parameters: " + param);
}
}
But result always the same: app doesn't start from the pinned tile

Update 2: Finally, I did it
The trick is:
- do the same as I've described above (you should have pinned tile from ND);
- add following code to the start page:
Code:
public MainPage()
{
InitializeComponent();
var appTile = ShellTile.ActiveTiles.Last();
if (appTile != null)
{
//MessageBox.Show(appTile.NavigationUri.OriginalString);
EmailComposeTask emailTask = new EmailComposeTask();
emailTask.Subject = "NokiaDrive pinned parameters";
emailTask.Body = appTile.NavigationUri.OriginalString;
try
{
emailTask.Show();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message, "Error", MessageBoxButton.OK);
}
}
}
- run app as usual (not from tile);
We allset - all params are sent to our email (I'm too lazy to manually copy all stuff )
Here we are (start parameters; bold values are changed for privacy reason ):
/_default?destination.name=200 SomeName Street&destination.latitude=49.5255378801376&destination.longitude=-72.4296837244183&destination.address.street=SomeName Street&destination.address.houseno=200&destination.address.district=&destination.address.county=&destination.address.city=SomeCity&destination.address.state=&destination.address.country=USA&destination.address.postcode=05720&destination.hashCode=371767793destination.address.statecode=MA&pinnedFrom=Favorites
P.S. Just found: Navigon also has ability to pin address to the start tile So, if you find the way to modify map protocol (or how it calls), it will be a really nice hack! BTW, could you remind me: do we have ability to launch assembly by GUID (on the full-/policy-unlocked phones)? If "yes", it's possible to write a real nice "proxy" app to handle map requests

I don't know about launching assemblies directly, but it's certainly possible to launch apps by GUID. It doesn't even require anything more than dev-unlock in fact (although of course you can only launch apps that you could launch anyhow). So yes, a proxy app is totally possible. That's actually what I'm working on (started as a project to make a Kindle ebook file loader, that would pur .mobi/.prc file in the Kindle app's folder and then launch the app).

GoodDayToDie, could you please, take a look to the registry, for default map protocol handler and figure out how to change that stuff? I'm pretty busy these days (and probably will be extremely busy couple of next months) but we can cooperate and create this app...

I'll investigate, but you're not the only one busy. If you've noticed a lack of software from me recently, it's due to the nex job I got some months back; I love it, but it leaves me with a lot less time for phone hacking if I want to still have a life outside of that.
With that said, this actually ties into the work I'm already doing with things like filetype handling and default browser switching. I can send you my HKCRlib, at a minimum; it's a library that simplifies interacting with HKCR, including creating backups of important values when they change, and reverting the backups.

GoodDayToDie, truly, I'm not much interested (personally) in that hack 'cause I can't use it for my Lumia 900. So it's only for the community needs but because of lack of time, I believe, we may put it on hold.

Non android java java files

I have android central and no one has responded so i figure i would try here.
I hava a college class for "intro to java"
And would you know it we have java files that i would LOVE TO EDIT ON MY TABLET
I have found java code viewers and allow some tiny amount of editing but NO ONE ALLOWS me to run code.
Example:
import java.util.Scanner;
public class Main {
public static void main(String[] args) {
Scanner kb= new Scanner(System.in);
double page;
double pheight;
double pweight;
double bmr;
int activity;
double burned;
String a1="Sedentary, little or no exercise, desk job.";
String a2="Lightly active (light exercise 1 to 3 times a week).";
String a3="Moderately active (Exercise 3 to 5 times a week.";
String a4="Very active (Exercise 6 to 7 times a week).";
String a5="Extra active (Exercises two times a day. Includes running marathon etc).";
System.out.println("What is your age?");
page = kb.nextDouble();
System.out.println("What is your Height (in inches)?");
pheight = kb.nextDouble();
System.out.println("How much do you weight(in pounds)?");
pweight = kb.nextDouble();
bmr= 66 + 6.2*pweight + 152.4*pheight - 6.8*page;
System.out.println("Please enter the correct numbe rthat goes with our life style.");
System.out.println(a1+"|1.2|");
System.out.println(a2+"|1.375|");
System.out.println(a3+"|1.55|)");
System.out.println(a4+"|1.725|");
System.out.println(a5+"|1.9|");
activity =kb.nextInt();
burned = bmr*activity;
System.out.println("Your age is :"+ page);
System.out.println("Your height is :"+pheight +"in.");
System.out.println("You weight is :"+pweight+"lb.");
if (activity== 1.2)
{
System.out.println("The activity factor -"+a1);
}
if (activity== 1.375)
{
System.out.println("The activity factor -"+a2);
}
if (activity== 1.55)
{
System.out.println("The activity factor -"+a3);
}
if (activity== 1.725)
{
System.out.println("The activity factor -"+a4);
}
if (activity== 1.9)
{
System.out.println("The activity factor -"+a5);
}
System.out.println("The bmr is-"+ bmr);
System.out.println("You burned "+ burned);
}
}
No app that i can find can you this simple program and thus making my college class EXTREMELY hard
Please some one help
Sent from my GT-N8013 using xda app-developers app

Your Java instructor will surely have told y'all about compilation to bytecode with the JDK, running bytecode in the JVM, etc. There is no Java Virtual Machine (not to be confused with the Dalvik virtual machine) for Android, at least that I know of.
Your best options for running Java code "on" your tablet are:
SSHing to a server where you can compile your Java programs on the command line, presumably through some linked storage enabling you to do your editing on Android.
Editing your Java programs on your tablet and then using a website like http://ideone.com to run your code.
Honestly, though, this is going to be much more cumbersome than working on a laptop or desktop.
EDIT: See also this thread, especially the last post: http://forum.xda-developers.com/showthread.php?t=1452666

If you're comfortable with working in a terminal, I highly recommend TerminalIDE. It's what I used for the first term of Java programming in college last year (in fact, I think it was the only app that allowed Java compilation at the time).
There's also AIDE which is great for developing Android apps, but probably not so much for following along in class, since for even basic GUI stuff, you'd have to figure out how to do it the Android way (which is very different from swing), and I'm not sure how it'd handle console apps (maybe fine, but then you'd have to deal with switching windows to a terminal emulator, such as TerminalIDE, anyway... probably best to just use TerminalIDE from the start).

Help for starting developing

Hi Guys,
I wanna start developing apps for the gearS2. Foir now I have some experience with html and several other languages mainly for windows applications and also last programming job was like 6 years ago so I'm not really up to date with all the different options for developing.
For start I tried to use the tizen SDK but I'm a little lost due to the variaty of options and also the quite buggy SDK. Installing the 2.4 SDK left me with an error for the simulator (hax not working). I t hink i got arround this by installing this manually. Emulator works now but for example the UI builder doesnt work. So my thought is to start a web app with tau as this seems to work quite reliable. My goal is to write a basic control of my hue lights (I know there is an app for that but I wanna try to build my own). My plan is to use an java lib for the hue commands and do the rest via the tau/html/javascript.
Now my question is if anyone can give me any advice on how to start developing. Does my plan seem valid. Can anyone help me or give me some tips? Maybe I'm missing something or someone just has some shortcuts.
Thanks in advance.
Björn

Hi.
I found this "howto" : http://www.tizenexperts.com/2015/12/how-to-deploy-to-gear-s2-smartwatch/
It helped me to successfully deploy a project sample on my gear s2 folllowing these steps :
- install sdk
- generate & configure author certificate.
- download, compile and run/deploy a project sample on the gear s2 (SensorBall).
During the "Request the Certificate" step, I ran into this java exception :
Unhandled event loop exception No more handles [Unknown Mozilla path (MOZILLA_FIVE_HOME not set)]
Click to expand...
Click to collapse
I'm on "debian jessie" with "openjdk7":
If this happens:
- install package "libwebkitgtk-1.0-0"
- add "-Dorg.eclipse.swt.browser.DefaultType=webkit" to you "eclipse.ini" file
- restart tizen.
At the end, you'll have a new app installed on your watch. You can recognized it with the tizen icon.
I hope this can help you.
Bye.

thank you for your feedback akaiah.
I found this site earlier, requested a certificate but then I couldnt find the site again. So thx for the link.
My problems are more linked to
a) the general structure of webapps for tizen
b) rusty coding skills (last time i coded was 6 years ago and mainly c# / object pascal for windows)
c) problems with tau / it's documentation
Maybe someone can help with a few detailed questions.
First question is regarding the online samples. I've found the following code in one sample for wearables (calendar app) but I don't know what this is and if I should be using stuff like this. It doesn't look like standard javascript to me but I can't find any API/library included either:
Code:
/**
* App module.
* @requires {@link Calendar/views/initPage}
* @namespace Calendar/app
* @memberof Calendar
*/
define({
name: 'app',
requires: [
'views/initPage'
],
def: function appInit() {
'use strict';
/**
* Initializes the app.
* @memberof Calendar/app
*/
function init() {
console.log('app::init');
}
return {
init: init
};
}
});
Second question is regarding jquery. Which version should I use and how am I supposed to include this? I'm using the 2.4 SDK download but programming a wearable web app with 2.3.1. I tried inlcuding jquery by downloading the latest version 2.1.4 (uncompressed) and putting it in my lib file folder, then including it in the html header. I have the feeling though that this is causing some issues. E.G. some notations don't work:
Code:
$( "#divname" ).innerHTML = "newtext";
doesnt work. No error just no result.
Third question is regarding tau. I tried to create a popup and register a callback for the popupafterclose-event like this but it doesn't work (event is not fired)
HTML:
<!--Popup HTML code-->
<div id="popup" data-role="popup">
<p>This is a completely basic popup, no options set.</p>
</div>
<script>
// Use popup events
var popup = document.getElementById("popup");
popup.addEventListener("popupafteropen", function()
{
// Implement code for popupafteropen event
});
</script>
taken form HERE
What am I doing wrong here? Is this the correct API im looking here or maybe does it collide with the jquery library?
For any tips I would be very thankfull.
Greetings
Björn

Wow thanks finally some one. I wold love to root my device ..
If theres a way.

If anyone was wondering about this issue, I kind of got this solved.
I just started an new project copied over all code and removed my jquqery imports and the code that gave me errors before just works fine. TAU in generell seems to be quite buggy and is easily be destroyed by an "unlucky" combination of UI changes (opening a popup or another window).
Even a week later I still don't know what the code in the calendar sample is from and tau seems not to be the most stable library out there. If anyone else has trouble starting developing for this I'm happy to share more experiences.
Greetings from germany