I am used to utilize my phone as a modem while travelling. Since switching to the Xperia I cannot because internet sharing application is blocked: "IntShrUi.exe blocked" when launching the application. I understand this is due to company policies (this happened after setting the connection with the exchange server)
Is there any solution to unblock it? I only would like to avoid to bring a different data card with me.
maybe it's just blocked in your rom
because it works in my x1
It is blocked due to company IT restrictions. It cannot execute the IntShrUi.exe
I only wanted to know if there is any different way to use it as modem or to allow th execution of IntShrUi.exe
WMWiFiRouter would work look it up
that is OK while there is a wifi connection.
I wonder if there is a way to tweak the registry
Related
I configured VPN over GPRS on my wizard. I can get a IP address from my company VPN server, it is something like 10.1.1.*. Before that, my GPRS connection provider - China mobile - also give me a 10.232.*.* address. And there generate a route 10.0.0.0/8 10.232.*.*, thus cause me can not access my company network -all packets to 10.*.*.* are direct to 10.232.*.
But this situation does not appear on my friend's HTC TOUCH, because no 10.0.0.0/8 route generated there and can be generated by flash to another ROM. So I think it is because of different OS, I have tried many ROMs on my wizard, but got same situation. - as far as I tried, no ROM solved my problem. If anybody can help me out?
attachment is the tool I used to see routing table on PPC.
I have the AT&T Fuze with the stock ROM. I purchased it the first day it came out. I think this was 11/11/2008. I have the PDA Personal plan for unlimited data. I have things set up so that my contacts and email synch with our Exchange server. I can remote desktop from my Fuze using the data network to any machine that I can remote to from my computer, so from that, I am thinking VPN must be configured correctly. On one of these machines that I connect to, I have IIS running and put a very simple web page on it (no script, nothing IE specific). From my work computer, it loads fine. I can remote desktop from my Fuze to any machine on the network and launch IE and load it. But, I can't load it directly from my Fuze in either Opera or IE. It does initiate the VPN connection. But, then I get the error HTTP gateway timed out. I'm really not interested in viewing the page that I created. We use Perforce, which is source control system. It has a jobs portion, which we use to track bugs. There is a web interface to the jobs, which is on the intranet, not internet. I don't have rights to remote to the Perforce server, and that is why I initially tried putting a simple page on a machine that i am an admin on. I want to be able to click on a link in my email and have it load the bug in Opera. If I am home and turn on WiFi, and disable the data network, this works fine. This bypasses AT&T's machines, which makes me think there is something that AT&T is blocking. And if they are, then maybe it is the AT&T bloat this is telling them what it is. Our IT guy has verified that I am successfully VPNing in. He is seing the mycingular.net in the firewall.
My boss has the same phone, but purchased more recently, and his is working fine for this. He has flashed the new AT&T test ROM, and done the thing that keeps the AT&T bloat from getting installed.
The fact that remote desktop works, but browsing a webpage on the same machine does not, makes me think there is more to this than just network settings.
If anyone has the anwer to this, please share. If I find the answer, I will post it is well. I have extensively searched the forum for the answer to this, and have not found anything that worked. If I have missed something, I appologize.
Sort of works now, still have an issue
After going to the proxy tab, and checking that This network connects to the Internet and checking the check box that this network uses a porcy server to connect to the internet. Then specify the server. Then go to Advanced and change the HTTP port to 8080 instead of just 80. I also put the user id, password and Domain in on the proxy for HTTP.
But I get prompted for a user id and password from the proxy erveer. I have entered it and clicked the checkbox to save it. It does not display the same info that I entered the next time and it does not display what was entered on the HTTP proxy page. It is a drop down, and I can select the correct one. It's just annoying to need to. I'd like to clear this cache.
Also, to initially get it working I had to disable HSDPA and HSUPA, restart. Then reenable it. I have the registry on my Fuze which give me the menu option on the Advanced network tab to do this.
Figured out how to clear the cache issue - still prompts
The cache was a setting in Opera for passwords.
It still asks for the password. At least it is prefilled with the correct info, since I now only have the one entry, so it is just 1 click, but I should not need to do this step.
Any one know what I need to do to fix this.
If I try to load it in IE, it just tries but never succeeds and never asks for a password, just says Opening.
Connections
Why should I need to set this to connect to the Internet, and use the ISA server? I would think if it needs to connect to the internet, it should be able to just use the Media Net
My Media Net Settings are
Modem -
Name - Modem
Media Net - wap.cingular
Advanced shows the modem in the drop down list as Cellular Line (GPRS, 3G)
The drop down is disabled
Next
Access Point Nam - wap.cingular
Next
User name - [email protected]
don't know what the password is. I've never changed it.
Domain is blank
Next
TPC/IP
Use server - assigned IP address is selected
Use software compression and use IP header compression are checked.
Use slip is not checked and the checkbox is disabled
Servers
Use Servr Assigned addresses is selected
So DN,Alt DNS, WINS, and ALT WINS are disabled.
Proxy Settings
This network connects to the internet
This networks uses a proxy server to connect to the internet is not checked.
More info and additional question
Navigating to some intranet sites does not prompt me for the isa server.
such as http://machine/virtdir/Default.aspx
seems to work without being prompted
but
http://perforcemachine:8080/@md=d&cd=//&[email protected]//?ac=107&mx=25
prompts me for the password.
Also, in order to get either of these links to work, I need to have in my exceptions:
*.companyname.com/*
Where companyname is the actual companyname.
This is annoying because it makes it connect to the VPN when synching with the exchange server. Before I want on the quest to get these links to intranet sites to work, I synched with the exchange server without connecting to the VPN.
I've tried putting in isa.companyname.com in the exceptions, but that doesn't work.
Is there a way to do *.companyname.com/* except mail.companyname.com?
I suspect all of this is in the registry somewhere.
I need some assistance on setting up VPN access to my corporate network on my X 7510. I am technologically barely savvy. I am a business user of my X 7510.
Can someone please help me in configuring my device to access my corporate VPN?
The following describes my attempts to configure the VPN settings using the standard VPN configuration available on the device:
I am using the settings given by my network team. We are using a pre-shared key and no certificates. Our corporate VPN uses CISCO ASA 5520. When I setup the VPN there is an "Advanced" option that asks for certain server IP addresses. Our network team says that this need not be used.
I am trying to connect over a GPRS network. The most frustrating part is that the IT Manager uses an iPhone and he downloaded a VPN client for 9 dollars from the Apple Store and it works beautifully !!!
But I am not able to connect and I get an error message that says that there is a problem with my user name and password. The message asks me to turn off and turn on my device to see if that fixes my problem. But it does not.
I have triple checked all the setting details with our network team and all the data are correct. My network team can monitor connection attempts and they say that they are not even able to see any connection atempts from my device.
Can somone please help me?
I Think it depends on the rom you use. If that vpn package is there.
I also have a problem with my VPN on x7510. I think I get all the settings right because it says I am connected to my corporate network. Our network administrator from the network monitoring desk actually sees me connected. But I cannot access any application on the network, not even my company's intranet homepage.
Another irritating part is that when I fire up any application that requires internet access but not VPN - like Nimbuzz, the VPN starts to connect through GPRS - very annoying. So I have now set up the VPN to disallow internet access.
rsawoseyin
Can you please share how u have setup the VPN? I am not even able to connect.
Isn't there anybody else here who can assist?
My roms have vpn capabilities, if you go to connection at the bottom it has "set up vpn" (or something like that)
i have recently downloaded uc browser 7.2 and installed it on my spv c600 . but when it comes to initialization process it doesnt detect network .i really dont know whats the problem. im using an edge connection . ive tried previous versions but its still the same thing. can someone please help me?
Michaelbukachi said:
i have recently downloaded uc browser 7.2 and installed it on my spv c600 . but when it comes to initialization process it doesnt detect network .i really dont know whats the problem. im using an edge connection . ive tried previous versions but its still the same thing. can someone please help me?
Click to expand...
Click to collapse
maybe you should try UC Browser 7.4 offers support WAP2.0, you can mengundugnya at http://forum.xda-developers.com/showthread.php?t=847784
It works for me with 7.2.2.51. I hardly ever use that browser though as for WinMo standard also Opera mini and Opera 10 are available that both work great.
I think that UC is also not using ActiveSync connections, so your device must not be connected to the PC when you try using it. It also asks if you want to use a WIFI connection if availble, which other browsers don't do. So it seems that UC is not using the standard hierarchy for connections but picks them in an own logic.
The normal sequence of connections is:
- AS (including Proxy Settings)
- WIFI
- GSM
it still doesnt detect the network, i tried to change the phone settings from http to wap but still shows the same result . opera mobile and opera mini work properly on both settings , uc browser java version. so im wondering what could be the problem.
I think UC-Web is a proxy service just like opera-mini. It is hosted in China and it may block certain regions of the world to access their proxy. UC-web knows your region by the geo-location of the assigned IP of your provider. Consequently it should not work on any device with the operator you are using for WEB access.
thanks . i will buy another operator sim card to see if that solves the problem.
Well, if they exclude Ghana from their service it should be the same for all operators in that country. A new SIM card will have the need to setup the GPRS settings for the new operator as well, so there is effort attached to swap and test this.
It could also be the other way round, btw. Not that UC-Web blocks Ghana form their service (in China), but that your local operator will not allow to access the internet (or China) from the GPRS settings that you have in the device.
So first test if normal internet access works (iexplore or any non-proxy service) and then check with UC-Web.
just fixed the problem. it seems uc browser does not with proxy. so i tried settings without proxy and now it works superb.
Hello,
I have done a bit of a search about this but havent found an answer.
At work we have a network with wifi which is behind an authenticated proxy which the admins wont allow cell connection to. I have tried with various proxy apps but no luck. I need the wifi network to sync with the email server, which does work, however while on wifi I cant use the internet or receive txts from WhatsApp etc.
Basically I am just wanting to know if there is a way or an app, to enable 3G for a specific application while on Wifi, or to somehow enable both on request.
The dataplan I have at work is very restrictive, only 100 txt a month and 512mb Data a month on 3G. I therefore rely on WhatsApp to stay under this limit, but dont want my email app to sync to the server and download large emails while on 3G, only while on Wifi. And I need WhatsApp to use 3G as it cant get out via Wifi.
If anyone has suggestions or knows of something to get around this, I would really apprecitate it.
I am on a Galaxy S2 with Root.
Thanks
try droidwall- android firewall
Same issue
I have the same issue, only opposite, I use my phone at work to connect to a machine specific wifi router and vnc into the controls to control the machine. While I am on this connection without internet my 4g turns off and I get no data. Is there a way to force the 4g on while i am on a wifi without internet access so i can still access my email, pandora, etc?
I tried droidwall, but all that does is block the specific app from accessing the wifi connection, it still wont use the 4g connection while there is a wifi network connected, whether there is internet or not.
Oh yes, I am on a rooted Skyrocket on SKY ICS RC7.4 Speed (Great ROM BTW).
I'm guessing by the lack of response, nobody knows of a way to do what we are wanting, but I want to try refreshing this the once just to see if maybe the person who has the solution just missed the first time.
I did reflash my rom to SKy ICS 4.2A-8 if that helps. Im willing to use different roms, mods, hacks, whatever it takes to make this work.