You should do a nandroid backup and reboot your phone before trying to flash anything to your phone. This how to involves flashing directly to mtd2, if you don't know what you are doing then please use one of the custom roms available in the Sticky Wiki.
#### Update One Fixed scripts
#### Update Two Added instructions to compile and install the wlan.ko module
#### Update Three Fixed get-CDMAHero-source.sh typo
#### Update Four Added Instructions for Jaunty repo's for Ubunut 9.10
First off i would like to give credit to all the people who have made information and scripts available. I used bits and peices of info and tools written by and or made available by these people.
Armin Coralic http://blog.coralic.nl for creating some nice scripts and making them available
chuckhriczko for helping me out in the middle of the night.
LoxDev for creating a wonderfull how to about creating img's and zip's
tkirkton for helping out with enabling legacy jaunty repos to install java 1.5
Second I am writing this How To, so a complete newbie would be able to understand.
REQUIREMENTS....
Ubuntu Desktop 9.04 or better 32bit (cause thats what i used)
Android SDK (Needed to push and pull files as well as shell access to the phone. You will need to set this up by following the instructions found at http://www.android.com)
Legacy repo's enabled in apt to allow java 1.5 to install
Root access. I ran all commands below as root
I created a dir called "heroc" in my /root directory.
Download zip file below and unzip it in the heroc dir that you should have created.
STEPS
.5 Enable Legacy Repo's to allow java 1.5 to install (below is a cut from tkirktons post on page 7)
Code:
in Ubuntu 9.10, the Java 1.5 package doesn't even list. Here's what I had to do to get it to load:
1. Access a repository from the previous build (9.04 Jaunty will work: commands to put into /etc/apt/sources.list -
deb [URL]http://mirrors.us.kernel.org/ubuntu[/URL] jaunty main restricted universe multiverse
deb [URL]http://mirrors.us.kernel.org/ubuntu[/URL] jaunty-backports main restricted universe multiverse
deb [URL]http://mirrors.us.kernel.org/ubuntu[/URL] jaunty-security main restricted universe multiverse
deb [URL]http://mirrors.us.kernel.org/ubuntu[/URL] jaunty-updates main restricted universe multiverse
2. Set the max age higher than the default. This can be accomplished by editing the /etc/apt/apt.conf.d/20archive. Here's what my lines in that file look like:
APT::Archives:MaxAge "2880";
APT::Archives:MinAge "2";
APT::Archives:MaxSize "1000";
Making these two changes should work...although I have the Intrepid, Hardy and Dapper repositories in mine as well (didn't know which one would work, so I overkilled it).
Run the script again after making the changes and let me know if it works.
.
to update just run
Code:
# apt-get update
1. Create your work environment by running createandroidRepo.sh. This will take some time depending on your internet connection. Make sure you are in the heroc dir.
Code:
# unzip Scripts.zip
# chmod a+x *
# ./createAndroidRepo.sh
This will create a dir call my android and setup all the files and programs needed to compile the kernel. This will take some time to complete.
2. You need to download the source using the get-CDMAHero-source.sh
Code:
# ./get-CDMAHero-source.sh
This will download the source, and extract it to its own directory.
3. you will need to have your .config file handy for the next steps. If you don't have it then you will need to get it by doing the following
Code:
# adb pull /proc/config.gz /root/heroc/config.gz
# gunzip config.gz
The first command will pull the gzipped config from your phone and place it into the heroc dir. the second command will extract the file as "config"
4. This is where it gets fun. We now have everything downloaded and are going to start the process of compiling our kernel.
Code:
# cd heroc_ef05d31a
# export ARCH=arm
# export CROSS_COMPILE=arm-eabi-
# export PATH=$PATH:~/heroc/myandroid/prebuilt/linux-x86/toolchain/arm-eabi-4.4.0/bin
# make menuconfig
After you run "make menuconfig" it will bring up a the config menu for our kernel. Go to the bottom and select "Load an alternate configuration file". It will then prompt you to select the config file you want to use. You will need to point it to where you have the config file. So type in "/root/heroc/config"
After you have loaded the config file you can edit what ever you want. however if you don't know what do disable or enable then i wouldn't mess around to much.
Next you will need to save your config file. Choose "Save an alternate configuration file", and save it as "/root/heroc/heroc_ef05d31a/.config"
You can now exit menuconfig
5. Time To Compile the kernel and wlan.ko module
Code:
# make
# export KERNEL_DIR=/root/heroc/heroc_ef05d31a/
# cd myandroid/system/wlan/ti/sta_dk_4_0_4_32/
# make
The kernel will take some time. go grab a drink and have a snack. If all goes well you should end up with a zImage file in "~/heroc//arch/arm/boot/". After the kernel is compiled you need to compile the wlan.ko module by executing the last three commands
6. Next we need to copy the zImage back to the heroc dir
Code:
# cp /root/heroc/heroc_ef05d31a/arch/arm/boot/zImage /root/heroc/zImage
7. Ok so now we need to get the boot image from our phone. We need this cause it has more than just the kernel. I contains the ramdisk image as well. and we need to take the boot image and decompress it and remove the old kernel and add our new compiled kernel, then recompress it to newboot.img
Code:
# adb shell
# cat /dev/mtd/mtd2 > /sdcard/mtd2.img
# exit
# adb pull /sdcard/mtd2.img /root/heroc/mtd2.img
# mv mtd2.img boot.img
The first two commands will open a terminal shell to your phone and copy the boot image to your sdcard. the last two commands will pull the the boot image from your phone, place it in your heroc dir and rename the file to boot.img
8. Now we will split apart the boot.img using some scripts.
Code:
# ./extract-kernel.pl boot.img
# ./extract-ramdisk.pl boot.img
# rm boot.img-kernel
# cp zImage boot.img-kernel
# ./mkbootfs boot.img-ramdisk | gzip > ramdisk-boot
# ./mkbootimg --kernel boot.img-kernel --ramdisk ramdisk-boot --cmdline "no_console_suspend=1 console=null" -o newBoot.img --base 0x19200000
The first command extracts the stock kernel from boot.img. The second command extracts the ramdisk from boot.img. The third command will delete the stock kernel. the fourth command renames our zImage to boot.img-kernel. The fifth command takes boot.img-ramdisk folder and zips it up into ramdisk-boot. The sixth comand takes our kernel (renamed to "boot.img-kernel") and ramdisk-boot and combines it back to form a new file called newboot.img.
9. Now we need to flash our "newboot.img" file to our phone. You should reboot your phone before flashing this will insure that you don't get any out of memory errors and will keep your phone from booting into fastboot (Thx Obelisk79).
Code:
# adb push newBoot.img /sdcard/newBoot.img
# adb shell
# cat /dev/zero > /dev/mtd/mtd2 (you may get an error here. don't worry about it)
# flash_image boot /sdcard/newBoot.img
# reboot
The first command will push your boot image to the phone. the second command will bring up shell access to your phone. the third command will zero out mtd2 and get it ready to write your image. the fourth command will flash boot(mtd2) with newboot.img. the last command will reboot your phone
10. After the phone reboots we need to get the wlan.ko file to the phone so that wireless will work
Code:
# adb push /root/myandroid/system/wlan/ti/sta_dk_4_0_4_32/wlan.ko /sdcard/wlan.ko
# adb shell
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
# cp /sdcard/wlan.ko /system/lib/modules/wlan.ko
# exit
Now you have a kernel that you compiles with everything work with the exception of power mgmt.
Just as soon as i figure out how to make an update.zip i will post instructions on how to do this
Added it to the CDMA Hero Guides wiki article.
gu1dry said:
Added it to the CDMA Hero Guides wiki article.
Click to expand...
Click to collapse
dang you beat me to it.
Not sure why, but had to run dos2unix on the the first script, not sure if it is all of them, but it was giving me the error
/bin/bash^M: bad interpreter: No such file or directory
Click to expand...
Click to collapse
dos2unix took care of the issue. Also Thanks for the guide, greatly appreciated!!!
make sure you run the script with the "./" , also you may need to chmod +x the files.
Is there a way to get this to run on the Emulator? I tried to specify the zImage after I compiled it but it won't boot when specifying it. Or will that not work for the HTC zImage?
Excellent guide. Can't wait to try it.
blehzz said:
Is there a way to get this to run on the Emulator? I tried to specify the zImage after I compiled it but it won't boot when specifying it. Or will that not work for the HTC zImage?
Click to expand...
Click to collapse
Check out this link
Check out this link
Click to expand...
Click to collapse
Thanks will have a look. Seems to be the Android kernel and not the HTC kernel though, but will read further into it
blehzz said:
Thanks will have a look. Seems to be the Android kernel and not the HTC kernel though, but will read further into it
Click to expand...
Click to collapse
not sure but i think this will work for you
Code:
# emulator -kernel /path/to/your/zImage
First script didn't work for me on ubuntu. Copying and pasting line by line works.
i'll repack the scripts again
not sure but i think this will work for you
Click to expand...
Click to collapse
that's what i tried... emulator never runs when i specify that zImage it built successfully.
Has anybody tried this yet with Ubuntu running under VMware on a PC running Windows? I know that (in theory) VMware's USB compatibility is spectacularly good (it somehow manages to give the guest OS direct ownership and control of the host PC's USB root hub), but up to now I've only tried it to run XP/32 under Vista/64 and Windows 7/64.
FYI, you can download VMware player for free (as in beer) and use it to run Ubuntu 9.04 with their complete blessing. Just make sure you download a guest OS that configures the hardware (memory, cpu, etc) the way you want it to be, because changing the hardware config is one of the few things you genuinely can't do with the free player. If someone here has the full version (and can find somewhere to host it so the bandwidth charges didn't eat him alive), he could even create an Ubuntu distro that's already set up and configured to build Android kernels for others here to download and use.
To use the first script: open up Synaptics, then download "tofromdos". Now, run "fromdos createAndroidRepo.sh", and it should work then
ROM?
Can someone post how to compile a kernel, and make a ROM, and put it all together in a update.zip? Would be really REALLY nice!
Jason(bikcmp)
Thanks for this guide I'm compiling a kernel right now Just a question, how do I change the kernel version name... like you did in that one screenshot?
bikcmp said:
Can someone post how to compile a kernel, and make a ROM, and put it all together in a update.zip? Would be really REALLY nice!
Jason(bikcmp)
Click to expand...
Click to collapse
Its coming
bikcmp said:
Can someone post how to compile a kernel, and make a ROM, and put it all together in a update.zip? Would be really REALLY nice!
Jason(bikcmp)
Click to expand...
Click to collapse
its in general options in menuconfig.
Hi all, here is a package of command line tools I've put together, here's the readme with a few of the tools listed.
Android Command Line Tools
This Is Working Prefectly On Samsung Galaxy S3 'GT-I9305'
Your Phone Should Be Rooted To Perform These Steps!!!
Installation:
1. Copy The android-tools.zip To Your SD Card (Internal Or External) And Extract It
You Should Now Have A Directory Called 'android-tools'.
2. Open A Terminal On Your Phone And Type The Following
su
mkdir /data/tmp
cat /sdcard/android-tools/busybox > /data/tmp/busybox
cat /sdcard/android-tools/busybox-installer > /data/tmp/busybox-installer
cat /sdcard/android-tools/pkgs.tar > /data/tmp/pkgs.tar
cat /sdcard/android-tools/install.sh > /data/tmp/install.sh
cd /data/tmp
chmod 755 *
./install.sh
3. In Android Terminal Emulator Preferences, Set The Shell Path to '/system/bin/bash'
And Leave The Initial Command Blank.
4. Quit Terminal Emulator And Restart.
OpenSSH: ssh-keygen Save To '/data/local/home/root/.ssh/id_rsa'.
'ssh' And 'scp' Binaries Will Look For Keys In '/data/local/home/root/.ssh/'
So You Dont Need The '-i' Option, 'ssh-copy-id' Gets It From There Too.
Arduino:
There Is A Build Environment To Build And Upload Arduino Sketches With A Script Called 'arduino' To Wrap It Up
Type 'arduino --help' In Terminal To See Its Options, It Uses The Arduino-1.0 Core Library And I have Tested
Every Board And Can Confirm It Builds For All Boards Including 'micro' And 'leonardo'. It Uses 'avrdude'
'avr-libc-1.6.7' 'gcc-avr-4.5.1', I Wrote A 'arduino.nanorc' File For Writing Sketches Which Has All The
Functions And Constants Of The Arduino Core Library With The Same Colours As In The IDE.
Other Tools:
Some Other Binaries I Have Added Or Modified Are 'tar' With All Options Enabled, 'iwconfig', 'grep egrep fgrep'
With Colour And PCRE Enabled, '7zip', 'ipctool', 'shc' For Compiling Shell Scripts, 'ssh-copy-id', 'sed' With All Options
Enabled, 'macchanger', 'bootimg_baseaddr' In bash/sh, Compiled GNU 'core-utils', 'ncurses-hexedit', 'nmap', 'ngrep', 'nano'
'strace', 'gcc', 'g++', 'unpack-bootimg' In bash, 'unrar' And 'vim'.
Backtrack 5 ARM Is Configured And Ready To Go, Just 'mkdir /sdcard/Chroot'
And Copy Your bt5.img File Into It And Type 'bootbt', Then Edit The Scripts
For VNC Server 'startvnc' And 'stopvnc' To Reflect Your Screen Size, These
Are In The pkgs.tar
Replacing '/system/etc/mkshrc' With The One Included In This Package Enables Bash As Default In ADB Shell
If The Bash Binary Is Found In '/system/bin/bash' Else The Default Shell Will Drop Back To mksh.
Nano Does Not Save Through ADB Shell Using ^O Or '^X Then y' Method, Works Fine In Terminal Emulator App On Device.
There are more tools than listed above, here's the link> https://www.dropbox.com/s/yjumfljy7e1yoyc/android-tools.zip
If you're on an custom ROM and can't use the terminal emulator when you restart terminal emulator, get /system/lib/libncurses.so from stock ROM and use adb to copy it into /system/lib on your current ROM, I will fix this tomorrow.
Sent from my GT-I9305 using xda app-developers app
Please post the right link... this one is malformed.
sciurius said:
Please post the right link... this one is malformed.
Click to expand...
Click to collapse
op just updated the link, package is now ready for download again!
thank you, andreotti09!!!
greetz,
sUsH
:::BRIEF DESCRIPTION:::
mksh is the official, currently-developed shell used for Android. It is not an app nor a virus (lol) like some people seem to think, looking at a quick xda search. And as the core shell for android, it is used to shell superuser, so if you're rooted and get a message saying "mksh requests root", that basically just means that superuser is being run correctly and is using the default Android shell that is in every Android device. (GOOD)
If you get a message saying bash(or any other shell) requested root, and you're NOT in the terminal interactively. That most likely is NOT GOOD! Almost all bash scripts I've seen will run shelled with mksh, so be safe and shebang with mksh. You'll have better performance and features, and when you see bash requesting root, you'll know when your security is likely compromised.
::: mksh Resources/links/info :::
mksh author: mirabilos (on xda forums)
mirbsd mksh main page: https://www.mirbsd.org/mksh.htm
mksh man page: https://www.mirbsd.org/htman/i386/man1/mksh.htm
edited 15Aug2014
Now that that's out of the way, I've attached a few zips in the 2nd post. The first contains my personalized mkshrc (startup mksh script), the full original mkshrc it's based on, and a diff for anyone who's interested. **This file belongs at /system/etc/mkshrc.** The rest of this first post details what I've cooked up in my mkshrc (and fpath functions). The other zips' contents are described in the 2nd post.
Features scripted into mkshrc:
--sudo: basic su executor
e.g.:
Code:
sudo mount -o rw,remount -t f2fs /system /system
sudo cat <<< $'\n' >> /system/build.prop
sudo 'sysrw; for i in /system/*; do chown 0 "$i" ; done; sysro'
--suid: (set user id) Uses chpst to run a prog setsuid, this is broken in most busyboxes so I included one with a working chpst. Usage:::
e.g.:
Code:
suid 1000 sh
--Rebind tab completion: unjams clustered words:
e.g.: <[cursor]> is cursor position
Code:
bind -m -- '^I= ^B^[=^D'
<<EXAMPLE USAGE>>
ec<[cursor]>12345 + tab ---> echo 12345
--Rebinded "control + u" to "cut-to-beginning of line" like bash. (As mirabilos points out, this is ksh incompatible behaviour since "control + u" is "kill-line" in *ksh shells. This can be removed from the (/system)/etc/mkshrc shell startup file if it presents any problems in editing.) The exact binds are:
Code:
bind -- '^[W=kill-region'
bind -m -- '^U=^[ ^A^[W'
<<EXAMPLE USAGE>>
ec<[cursor]>12345 + ctrl + u ---> <[cursor]>12345
--TMPDIR: mounts a tmpdir at /tmp for all users and random generates subdirs for individual secured tmpdirs. This fixes here-docs, here-strings, and here-executions.
e.g.:
Code:
su << 'eof'
sysrw; chgrp 2000 /system/bin; sysro
! (( $? )) && print -- -changed them bin group-
eof
--Basic "help" command: Android lacks this and the doc is still under development I believe. I added all the basic info/command-forms for mksh bultins to a command help(aliased to h):
e.g.:
Code:
help mkn
> mknod [-m mode] name b|c major minor
> mknod [-m mode] name p
or
Code:
help
(all help is printed, grep from here if you want)
--Complicated-programmed and colorful PS1 prompt, it looks good and I thought it through. Programming shows mksh potential for rich shell programming. It auto-turns off xtrace within itself (to 3 lines) so that 50 lines don't get printed each return with set -x. mksh small (R43 mksh) will be autodetected and give a different white and black classic ksh prompt.
--ton of ultra lazy aliases, got my android scripting speed up to ~70% my normal pc speed.
--dot.mkshrc functions from official mkshrc like pushd, popd, dirs, more, hd, Lb64encode, Lb64decode, hash optimizations
The scripting in this gets pretty complex, especially the inherent mkshrc functions. It would make a good scripting learning tool to say the least. I know I've learned twice what I knew from bash scripting back 3 months ago.
I've been working on modding the mkshrc a while, so I appreciate any error reports if you give mine a try. Shouldn't be any problems though.
Modifying the mkshrc file / mksh shell has system-wide effects, so PLEASE nandroid backup as usual!!! This should be COMPATIBLE with all androids, but has only been tested on my Galaxy Nexus thus far. **The binary is compatible with androids using an ARM cpu, but the steps in the 3rd post will generate a binary for whatever ARCH you're running.**
EDIT: reprogrammed sudo with pexec, so it can do parallel executions. pexec, grep, and a full busybox are included in a zip with some other bins.
For Jack Palevich's terminal emulator or connectbot, telnet, etc, I use this as my su'd "shell" command under >>Options>>Shell:
Code:
/system/xbin/su --shell /system/bin/mksh --command exec /system/bin/pexec -z -15 --shell /system/bin/mksh -m '/system/bin/mksh'
What's safer though is to just use a non-su shell command:
Code:
/system/bin/mksh -
...and then use sudo for your su commands. This is more linux'y.
EDIT2 (big update): Got static mksh R50 compiled. Ended up booting ubuntu in Android to compile instead of cross-compiling. mksh's Build.sh compiler script works great. I just had to "sudo apt-get install gcc" and bam it built with "LDSTATIC=-static ./Build.sh".
EDIT3 - Changed main.c source mkshrc file to /system/etc/mkshrc, perfect static mksh R50 now.
EDIT4 - Changed compiler to klcc to get size way down, now at 196KB with -O2 LTO speed optimizations.
EDIT5 - Binary is updated to R50d, compiled with CFLAGS=-Os, and stripped to get size down to ~140KB. (This is even smaller than the R43 dynamic mksh binary that is currently used in roms.)
EDIT6 - Added a mksh trunk (latest and greatest) binary with the printf builtin compiled in. Use with caution. Btw, if you read all the way down here, then yes, these binaries work in lollipop since they're statically compiled.
:ownloads:: (#7 or #8 is the static binary by itself)
(1) mksh R50 source, binary, manual
(2) Highly compressed pack of extra bins/libs that are mentioned in my mkshrc (zsh, lz4c, grep, busybox, bash, nano, vim, curl, etc) and some other cool ones like macchanger and ed. Download #3 to extract on Android.
(3) 7za in case you need it to extract (2) on Android.
Code:
7za x name_of_archive.7z
(4) Classic unix text editor "ed" which mksh uses for edit functionality. (Copy to /system/bin along with mksh.)
(5) Official mkshrc (unzip and copy to /system/etc, set permissions to 0444)
(6)
My personalized mkshrc startup mksh shell script based on the official full mkshrc 2014/01/11 release. Described in first post. If you try this, make sure to symlink /system/xbin/busybox to /system/bin/busybox.ndk.
Official mkshrc 2014/01/11 release
"diff -ur /system/etc/dot.mkshrc--official.mkshrc mkshrc" (diff patch set from official mkshrc to my personalized mkshrc)
(7) mksh static binary! (Just unzip, "chmod +rx" it, and copy to /system/bin or run from anywhere, no libs required )
(8) mksh R50e with printf builtin (I know some people were looking for this)
::: Building mksh Static On Android (really Ubuntu though..):::
This is just for anyone who wants to try, and especially those without access to a PC.
Things we'll need besides your phone:
-"Android Terminal Emulator" app {get it from (http://jackpal.github.com/Android-Terminal-Emulator/downloads/Term.apk) or fdroid or gplay}
-"Complete Linux Installer" app {get it from (http://sourceforge.net/projects/linuxonandroid/?source=typ_redirect) or gplay or maybe fdroid}
-internet/wifi
-mksh source {download from (https://www.mirbsd.org/MirOS/dist/mir/mksh/mksh-R50.tgz) or link in first post or DL in second post}
1) We need to get Ubuntu or Debian booted for a sufficient build environment. I've used both on Android but I like the better stocked terminal in the Ubuntu images. I used the app Complete Linux Installer which is free and works beautifully, very simple and easy too. In the app you want to follow the short instructions to download an Ubuntu image, rename it to ubuntu.img, and place it in a folder named ubuntu in /sdcard. Then hit menu in the app and click the terminal screen icon that says "Launch". An Ubuntu terminal will now open in Android Terminal Emulator. Super quick and easy.
2) Let's download GCC and ed so we can build and test with zero errors.
Code:
apt-get install -y gcc ed
3) Now the cool thing about this chroot Ubuntu environment is that we still have access to the sdcard to transfer files between Android environment and the chroot jail. Extract your downloaded mksh source to your Ubuntu home with something like:
Code:
cd
tar -xf /sdcard/Download/mksh*.tgz
cd mksh
4) Since we're building this for Android, the mkshrc file is at /system/etc/mkshrc instead of ~/.mkshrc, so we can change this with:
Code:
sed -i 's|~/.mkshrc|/system/etc/mkshrc|' ./main.c
Now we can build mksh statically:
Code:
chmod +x Build.sh
MKSHRC_PATH=/system/etc/mkshrc LDSTATIC=-static ./Build.sh -r -c lto && ./test.sh
Let the build script crank out the binary for a couple minutes and run the test suite. There should only be an error on a "mkshrc" test since we changed it for android. The "-r -c lto" flags/opt aren't needed but recommended.
Edit: (size optimization): Strip the compiled mksh binary to make it super small (~150KB with a CC="klcc" or CC="diet gcc" compile).
Code:
strip --strip-unneeded ./mksh
5) Now let's copy it to /system/bin to replace your old one.
Code:
cp ./mksh /sdcard
(Open a new terminal tab to get into Android Environment)
sysrw
cp -f /sdcard/mksh /system/bin
chmod 0555 /system/bin/mksh
sysro
.. and done. Run some scripts and enjoy your static mksh!
*** OPTIONAL EXTRA STEPS TO USE klcc or other compiler ***
In step (1), also do
Code:
apt-get install -y libklibc-dev
to get the klibc development tools, and then...
In step (4), this is how you specify to use klcc (aka build against klibc using the klcc wrapper):
Code:
CC="$(which klcc)" MKSHRC_PATH=/system/etc/mkshrc LDSTATIC=-static ./Build.sh -r -c lto && ./test.sh
:::Compile mksh in Android (for ARM):::
1) Download the attached cross-compiler and mksh source (https://www.mirbsd.org/MirOS/dist/mir/mksh/mksh-R50.tgz). Copy them to /data/media. If you don't have 7za, download that as well from the previous post but place it in /system/bin and "chmod +x" it
2) Extract contents:
Code:
cd /data/media
7za x -so 2014-10-01__simple-cross-compiler-armv4tl.stripped.tar.7z | tar -xf -
tar -xf mksh*.tgz
3) Compile the source with:
Code:
cd mksh
chmod +x Build.sh
LDFLAGS=-static CC=../simple-cross-compiler-armv4tl.stripped/bin/*gcc ./Build.sh -r -c lto
../simple-cross-compiler-armv4tl.stripped/bin/*strip -s mksh
4) Replace old mksh and mkshrc
Code:
mount -o rw,remount /system
cp mksh /system/bin
cp dot.mkshrc /system/etc/mkshrc
chmod 0555 /system/bin/mksh
chmod 0444 /system/etc/mkshrc
mount -o ro,remount /system
@7175 : Hello! Look like a bunch of hard work there. Very nice.
1. Would you have any clue to what's going on HERE?
2. Would you know if I can just install over my old mksh binary to get this working, or do I need "everything"?
3. And since I've heard that /system/bin/mksh will soon be permanently only /system/bin/sh perhaps this need to be changed?
Hey E.VA. thanks for checking out the thread. If you want to just test out R48 mksh, just copy(from zip root directory) the lib*.so from /data/media/shell to /system/lib and then copy /data/media/shell/mksh to /system/bin (and chmod 0555 /system/bin/mksh; chmod 0444 /system/lib/*.so). Then you'll have your whole system running full mksh R48.
As far as the ssh problem with android, this definitely becomes grey-zone material to my knowledge, which is limited in this area. I'm pretty sure android has udev amputated so it lacks a fully working /dev/tty. This could probably be patched over though with some terminal work, mknod action. I've gotten ssh working under "terminal ide", but haven't used the stock ssh stuff in /system/bin. Now that you mention this though, I will try and get stock ssh going as well as openssh which had a similar problem last time I tried (thx for mentioning your support thread, I'll be checking that out).
Here's what I searched to shed a little light on that ssh /dev/tty issue: duckduckgo.com/html5/?q=ssh+%27dev%2Ftty%27+error.
It looks like you've done a ton of searching though.
For su commands, I would try using, e.g.,
Code:
su exec [i]command[/i]
...opposed to "su -c", or better e.g.,
Code:
su -c exec /system/bin/sh -c '[i]command[/i]'
...and see if that gives any different results.
I just know from experience "su -c" hasn't always cut it.
*edit: Couple other things worth trying:
1) preappend command with environment variable: global TTY=/dev/pts/0 ...
2) use the -T option when calling mksh, i,e. ssh ... -e mksh -T /dev/pts/0 ...
@7175 : Hey thanks for looking into this. I will definitely try your suggestions.
However, I've already tried the -T flag to ssh, but never by specifying the pts to use, as it should be dynamically allocated by the ptmx. (As it could be already in use, by something else, like ATE.) Also, what does "global" do?
You also mentioned "stock ssh" in /system/bin. I've never seen that. Perhaps that could be a better solution, unless its' even more crippled. Does it also support sshd (i.e. ssh -D)?
In the mean time, is there any particular reason why you decided to dynamically link mksh? (I assumed it would have been more portable with static linking?)
I see that you did a huge amount of work on that mkshrc script. Looks crazy (in a good way)!
Finally, and aside, I also noticed that when I start mksh from ssh session, there are some aliases in there, that is not specified in the mkshrc, nor the .profile of my SSH server, so where the heck do they come from?
Code:
[SIZE=2][email protected]:home # alias
autoload='typeset -fu'
functions='typeset -f'
hash='alias -t'
history='fc -l'
integer='typeset -i'
local=typeset
login='exec login'
nameref='typeset -n'
nohup='nohup '
r='fc -e -'
source='PATH=$PATH:. command .'
type='whence -v'[/SIZE]
Perhaps they're hardcoded or sourced from somewhere? Have you seen this?
E:V:A said:
@7175 : Hey thanks for looking into this. I will definitely try your suggestions.
However, I've already tried the -T flag to ssh, but never by specifying the pts to use, as it should be dynamically allocated by the ptmx. (As it could be already in use, by something else, like ATE.) Also, what does "global" do?
You also mentioned "stock ssh" in /system/bin. I've never seen that. Perhaps that could be a better solution, unless its' even more crippled. Does it also support sshd (i.e. ssh -D)?
In the mean time, is there any particular reason why you decided to dynamically link mksh? (I assumed it would have been more portable with static linking?)
I see that you did a huge amount of work on that mkshrc script. Looks crazy (in a good way)!
Finally, and aside, I also noticed that when I start mksh from ssh session, there are some aliases in there, that is not specified in the mkshrc, nor the .profile of my SSH server, so where the heck do they come from?
Code:
[SIZE=2][email protected]:home # alias
autoload='typeset -fu'
functions='typeset -f'
hash='alias -t'
history='fc -l'
integer='typeset -i'
local=typeset
login='exec login'
nameref='typeset -n'
nohup='nohup '
r='fc -e -'
source='PATH=$PATH:. command .'
type='whence -v'[/SIZE]
Perhaps they're hardcoded or sourced from somewhere? Have you seen this?
Click to expand...
Click to collapse
Thanks man lol it's a big rc. It was 50KB before I converted a bunch of the functions to fpath functions in /etc/fpath and stripped most of the comments. It should give a pretty quick shell in terminal though with the ulimit and renicing tweaks. The PS1 prompt is pretty awesome, probably the best thing in the mkshrc I included.
"global" is a function just like "typeset" or "declare" in bash. The difference is that global prevents an accessed variable from being localized/ different than the global value in a function. This is a mksh function, bash will use "declare -g". There are a couple of example usage in the mkshrc, like with the set -x spam fix for the command prompt.
I checked and stock ssh in /system/bin has the "-D" flag. I would also check rolo's zshaolin zsh project which comes with some afterstock ssh stuff, ssh keygen, ssh keysearch, different ssh etc.
Yeah I just symlinked sh to save space really and for portability to try out other shells like bash and zsh(this works!) to run the system. Recently I switched to using a copy of mksh as sh since "chattr +i" wasn't protecting the symlink from being over-linked.
The aliases you posted are in fact hard-coded. If you do "strings /system/bin/mksh | grep -C7 autoload" or something similar, you'll see them in the binary. I always wondered where those came from too until I read through the mksh manual over a couple months, that's some pretty dense reading lol. mksh is a superb shell though, so it's definitely well worth it.
Sorry I can't be of more help with the ssh /dev/tty problem. I will keep my eyes open though, and try not to be so lazy using telnet for all my remote connections. I mean that's basically using the internet without a condom lol.
(*Also, just something I should mention about the install zip contents: not all the /etc/fpath functions are finished yet. I still gotta tweak the ssh ports from /etc/ssh and finish my xargs. Most should work though and are safe and won't interfer with shell usage, even if autoloaded.)
@mirabilos :
Hi, why did you choose to hardcode the aliases (shown in post#6) into the mksh binary?
Also, do you have a later version than the R48 Android binary above?
The "r" alias is particularly disturbing as it is masking the native toolbox use of "r" to read a memory location.
7175 said:
with the ulimit and renicing tweaks.
Click to expand...
Click to collapse
Why do they need to be tweaked?
I checked and stock ssh in /system/bin has the "-D" flag. I would also check rolo's zshaolin zsh project which comes with some afterstock ssh stuff, ssh keygen, ssh keysearch, different ssh etc.
Click to expand...
Click to collapse
Sorry my bad, I was sleepy and mistakenly understood "-D" as running SSH in daemon mode, when in fact it does the opposite and prevents it. Seem like his links are dead or I'm just looking in the wrong place.
Recently I switched to using a copy of mksh as sh since "chattr +i" wasn't protecting the symlink from being over-linked.
Click to expand...
Click to collapse
Not sure what you're saying here...
Sorry I can't be of more help with the ssh /dev/tty problem. I will keep my eyes open though, and try not to be so lazy using telnet for all my remote connections. .
Click to expand...
Click to collapse
Thanks, but if telnet works with tty/pts jobcontrol and vi etc, then I'm fine with that for now. I tried your command variations above and got this:
Code:
[SIZE=2]#ssh -2 [email protected] -p 2222 -T su -c exec /system/bin/sh -i # This worked!
#ssh -2 [email protected] -p 2222 -T su -c exec /tmp-mksh/tmp-mksh -T /dev/pts/0
/tmp-mksh/tmp-mksh: chvt: can't find tty /dev/pts/0
#ssh -2 [email protected] -p 2222 -T su -c exec /tmp-mksh/tmp-mksh -T /dev/ptmx
/tmp-mksh/tmp-mksh: chvt: new shell is potentially insecure, can't revoke /dev/ptmx
[/SIZE]
The fist one is good to get direct root prompt, the second fails, since pts/0 has not been created yet, and if it has, it fails with permission issue, since another process is trying to steal the pts. The reason why the third one fails, is very cryptic and I don't understand the error message and neither the code generating it.
Do you think one could use the ATE app to get a working root shell by the use of a more complex ssh command? Any suggestions how that would look?
Finally, I'm a bit worried about replacing the libc.so dependency, since the whole system depend upon it, and would probably not boot if an incompatible libc.so is used. This is why I asked about a static binary. I'd much rather have a bloated mksh than having to add library files. (We have plenty of memory and space these days.)
Regarding compiling, I would recommend using Linaro a build, rather than the crappy and often broken/outdated Code Sourcery junk.
Check this thread:
[LINARO GCC] Cross Compiler Toolchains [Linaro GCC 4.9 2014.07, 4.8 and 4.7 2014.04][19/07/2014]
Cheers!
7175 said:
--Better tab completion: unjams clustered words:
--Added "control + u" to "cut-to-beginning of line" like bash.
Click to expand...
Click to collapse
Hi! As the author of mksh, I am hereby explicitly requesting you to add a suffix to the shell version, similar to what the PLD Linux guys do here, because this changes the behaviour of the shell in an incompatible way. (Just add your own string there after a space, the @distro@ is just a placeholder that gets replaced with the PLD Linux package version.)
Do note that ^U in Korn Shell (and others) is “delete entire line”.
7175 said:
--Very complicated-programmed and colorful PS1 prompt, it looks good and I thought it through. Programming shows mksh potential for rich shell programming. It auto-turns off xtrace within itself so that 50 lines don't get printed each return with set -x. mksh small will be autodetected and give a different white and black classic ksh prompt.
Click to expand...
Click to collapse
Interesting idea, I think I will pick up the “set +x” thing.
Do you mind sharing a patchset of all your changes, so I can incorporate those I feel would be good to have in general?
7175 said:
EDIT: It appears the libc required for full mksh isnt always friendly
Click to expand...
Click to collapse
Just link the shell statically, then.
E:V:A said:
1. Would you have any clue to what's going on HERE?
Click to expand...
Click to collapse
You are annoying me. I've told you times and times again to disable SEAndroid, or to fix its SELinux policies.
E:V:A said:
2. Would you know if I can just install over my old mksh binary to get this working, or do I need "everything"?
Click to expand...
Click to collapse
Define “everything”. mksh in AOSP is /system/bin/mksh plus mkshrc.
E:V:A said:
3. And since I've heard that /system/bin/mksh will soon be permanently only /system/bin/sh perhaps this need to be changed?
Click to expand...
Click to collapse
I'm working with enh of Google on that. I would like for mksh to be installed as /system/bin/mksh and /system/bin/sh to be a link/copy of it, always. He said he'd agree I could change that back.
E:V:A said:
Hi, why did you choose to hardcode the aliases (shown in post#6) into the mksh binary?
Click to expand...
Click to collapse
These are part of the shell, and have always been, even in pdksh times.
E:V:A said:
Also, do you have a later version than the R48 Android binary above?
Click to expand...
Click to collapse
I do not deal in binaries normally. I'm somewhat working on updating AOSP to mksh CVS HEAD, in tandem with enh from Google, but when I had the time for that, it appears they changed the build system requirements. But it will be there.
It's not as if a newer mksh version would fix your SELinux problem, though…
E:V:A said:
The "r" alias is particularly disturbing as it is masking the native toolbox use of "r" to read a memory location.
Click to expand...
Click to collapse
The “r” alias is especially required for the Emacs command line editing mode. Interesting that toolbox uses it too. Thanks for bringing this to my attention, I will ask enh to change “r” in toolbox.
@E:V:A : Glad the first execution you mentioned worked. I would try messing with quotes/double quotes around the shell command, i.e. ssh ... -T su -c 'exec ...' or try ssh ... -T su -c exec "...", as something to test out further. This can make a lot of difference.
The ulimit shell function can control all sorts of performance related stuff, priority, max niceness, etc. You can see all values with "ulimit -a".
I understand your hesitance about the libc.so replacement. I would keep a copy of the old one and twrp backup before trying out a new one. I get what you're saying about statically linked binaries. I just fixed my i7 desktop that had a blown power supply, so I'll be looking into this. Thanks for the linaro link!
@mirabilos : Thanks for taking a look at this and providing us with mksh! I updated my OP with the specifics about the rebinds for "control I" and "control U" that you mentioned, and I added a suffix to the beginning comments of the file. Something like:
Code:
# $MirOS: src/bin/mksh/dot.mkshrc,v 1.88 2014/01/11 18:09:39 tg Exp $Android_mod by [email protected] 2014/08/04$
Not sure if that's what you wanted me to add in. I included an extra zip to download in the 2nd post that contains the official mkshrc 2014/01/11, my personal mkshrc, and a "diff -ur" patch (also attached to this post).
I will look into getting a statically linked mksh compiled, that sounds like something really handy to keep around.
edit: Here's basically what I added to the beginning and end of PS1 to trim down its "set -x" verbosity to 3 lines. I'd like to get it down more but haven't figured it out.
Code:
PS1=$'\001\r'; PS1+='${|
local e=$?
[[ -o -x ]] && set +x && global -x XTR_DBG=1 || global -x XTR_DBG=0
...
...
...
(( XTR_DBG )) && set -x
return ${e}
} '
7175 said:
@mirabilos : Thanks for taking a look at this and providing us with mksh!
Click to expand...
Click to collapse
You’re welcome!
7175 said:
Not sure if that's what you wanted me to add in.
Click to expand...
Click to collapse
Ah, so you did not patch the mksh binary, only the mkshrc file?
But then, that’s okay as you wrote, sure.
7175 said:
I included an extra zip to download in the 2nd post that contains the official mkshrc 2014/01/11, my personal mkshrc, and a "diff -ur" patch (also attached to this post).
Click to expand...
Click to collapse
OK, thanks. Will have a look at it within the next weeks (August is going to be a busy month for me).
I’m assuming you are okay with me adding some of your changes back to main mksh?
7175 said:
I will look into getting a statically linked mksh compiled, that sounds like something really handy to keep around.
Click to expand...
Click to collapse
Indeed, it is.
The first mksh run on Android actually was statically compiled against µClibc, though that’s cheating. (Also, dietlibc and klibc are better than µClibc). I think it should work against Bionic, too.
7175 said:
edit: Here's basically what I added to the beginning and end of PS1 to trim down its "set -x" verbosity to 3 lines. I'd like to get it down more but haven't figured it out.
Click to expand...
Click to collapse
I don’t think it works in less, considering you have to save the previous $?. There are a few handy tricks around. I tried these four:
#1 is:
Code:
local e=$?
[[ -o -x ]]; local x=$?; set +x
(( e )) && REPLY+="$e|"
[…]
(( x )) || set -x
return $e
This is about what you did. #2 is:
Code:
local e=$? x=$([[ -o -x ]]; echo $?); set +x
(( e )) && REPLY+="$e|"
[…]
(( x )) || set -x
return $e
This only looks different (I’d prefer #1 over this.) #3 is:
Code:
set +x $? $([[ -o -x ]]; echo $?)
(( $1 )) && REPLY+="$1|"
[…]
(( $2 )) || set -x
return $1
This reduces visual clutter. #4 is:
Code:
set +x $? $([[ -o -x ]]; echo $?)
(( $1 )) && REPLY+="$1|"
[…]
(( $2 )) && return $1
(( $1 )) && set -x && return $1
set -x
This reduces visual clutter even more, in that, when $? is 0, one line less is shown. But it makes the number of lines shown be not always the same. YMMV on whether to use this, #3 or #1.
This could be made even nicer *iff* mksh had the EXIT trap when leaving a function. The manpage says it’s TODO. This part of the manpage is from 1999 or older. (I started mksh in late 2002, early 2003.) Go figure… But now I have a reason to add it ☺
Another thing you could do is “set +o inherit-xtrace”, which makes functions not run with “set -x” when the main body runs with it. But wait, I see now that it does not affect ${|…;} blocks. This is a bug, which I’ll fix ☻
@mirabilos:
You Wrote:
1. Would you have any clue to what's going on HERE?
Click to expand...
Click to collapse
You are annoying me. I've told you times and times again to disable SEAndroid, or to fix its SELinux policies.
Click to expand...
Click to collapse
Well, you can be as annoyed as you like. First of all, that question was not aimed at you, and second, as I have also said repeatedly, I have already tried using SELinux in Permissive mode and it doesn't work either. In addition, your suggestion to "fix its SELinux policies" is rather ridiculous as there are no tools available to do so. At least nothing out of the box and no available binaries anywhere, and surely no instructions how to do so. So if you know how to do it, why don't you just explain for us how to do so. (My policies are updated to latest according Androids policy update tools.)
In addition there is no such thing as "disable SEAndroid". It's either in Permissive or Enforced mode. That is, unless you flash a new custom FW, which is out of the question. In addition, ATE works just fine, in Enforcing mode.
So believe me, I am far more annoyed by Googles lack of SELinux/SEAndroid developer support, than you will ever be from me asking these questions.
Thanks for explaining and helping with everything else above.
@7175:
The ulimit shell function can control all sorts of performance related stuff, priority, max niceness, etc. You can see all values with "ulimit -a".
Click to expand...
Click to collapse
Yes, I know about all those things, but I was asking why you think they need to be tweaked? The defaults, seem to work just fine.
@mirabilos : Thank you for your detailed replies, and I would be more than happy to contribute if you see anything from the content I posted.
It is interesting to see the other possibilities for turning off xtrace within the PS1. I didn't even realize you could set positional parameters after the set -x... I think I like that one the most. It just seems more array-like and streamlined, although I guess the same number of variables is still used. I look forward to seeing what updates you'll have on the exit trap and localization. This is something I'd like to toy around with.
I took your advice and set out to get a mksh static built. I ended up compiling with GCC, running "LDSTATIC=-static ./Build.sh" in the mksh source directory. I'm pretty new to cross compiling, so I didn't really get that far or try that hard before chrooting to a fresh Ubuntu terminal on my Nexus, installing GCC, and compiling there. The only thing I changed in the source code was ${ENV:-~/.mkshrc} to ${ENV:-/system/etc/mkshrc} in the "main.c" source file. I can include this in the OP though as you mentioned before. (edit: just saw this as a compiler option with Build.sh)
Edit: I see the option now in the Build.sh for changing the mkshrc path. Also, got R50 rebuilt static with klibc. Damn that got the size way down from using glibc, 684K to 204K.
R50e is released
R50e is released -- see https://www.mirbsd.org/mksh.htm#clog
Hi @7175, good stuffs here man :good:
I've been using your modded mkshrc, and I can see a hell of a lot of work you put into it. Looks really cool. Plus it's really a good place to learn for someone like me, I definitely had learnt a lot for the past few days. Tons of aliases too, and I'm getting used to using it now. I really appreciate your stuffs here, hope to see more of it
alanthehat said:
R50e is released -- see https://www.mirbsd.org/mksh.htm#clog
Click to expand...
Click to collapse
Thanks for the heads up. Updated the binaries posted in the 2nd OP to mksh R50e.
Reinkaos said:
Hi @7175, good stuffs here man :good:
I've been using your modded mkshrc, and I can see a hell of a lot of work you put into it. Looks really cool. Plus it's really a good place to learn for someone like me, I definitely had learnt a lot for the past few days. Tons of aliases too, and I'm getting used to using it now. I really appreciate your stuffs here, hope to see more of it
Click to expand...
Click to collapse
Thanks for the feedback man! Glad it's been a good learning experience like it has been for me.
7175 said:
Thanks for the feedback man! Glad it's been a good learning experience like it has been for me.
Click to expand...
Click to collapse
Well, thanks for the updated binary! Anyway, anything you can recommend me to read other than the man page in OP? And I have one more question, what's the difference between the busybox (I got one from your other thread) and yours busybox.ndk?
While I’m the upstream developer of mksh, hacking it has also been a good learning experience for me.
So it is for a friend of mine, who has taken some fundamental script frameworks I wrote, and extended it to an impressive management system, learning to code good shell while doing so.
I’m always happy when my stuff helps other people, and they share their joy! ☺
By the way: new mksh release announcements are sent over the miros-mksh mailing list (send an eMail to postmaster at mirbsd dot either org or de to subscribe).
---------- Post added at 08:40 PM ---------- Previous post was at 08:34 PM ----------
Well, we have https://www.mirbsd.org/ksh-chan.htm which collects lots of Korn Shell-related resources, although most of it is for AT&T ksh93 (the “original” Korn Shell), much also applies to mksh, though the Android OS has some special handling (especially caused by the different user-space tooling) obviously.
The shell itself behaves exactly the same across *all* supported platforms though, so (once you have set $TMPDIR to something writable for your current user) you can write Pure mksh code exactly like on Unix or Cygwin or the Macintosh or even Haiku.
mirabilos said:
While I’m the upstream developer of mksh, hacking it has also been a good learning experience for me.
So it is for a friend of mine, who has taken some fundamental script frameworks I wrote, and extended it to an impressive management system, learning to code good shell while doing so.
I’m always happy when my stuff helps other people, and they share their joy!
By the way: new mksh release announcements are sent over the miros-mksh mailing list (send an eMail to postmaster at mirbsd dot either org or de to subscribe).
---------- Post added at 08:40 PM ---------- Previous post was at 08:34 PM ----------
Well, we have https://www.mirbsd.org/ksh-chan.htm which collects lots of Korn Shell-related resources, although most of it is for AT&T ksh93 (the “original” Korn Shell), much also applies to mksh, though the Android OS has some special handling (especially caused by the different user-space tooling) obviously.
The shell itself behaves exactly the same across *all* supported platforms though, so (once you have set $TMPDIR to something writable for your current user) you can write Pure mksh code exactly like on Unix or Cygwin or the Macintosh or even Haiku.
Click to expand...
Click to collapse
Thanks for the link, and for your works on mksh too! I'm really new to shell, I'm not even that familiar with unix/linux either. But I always have been interested in shell scripting, so I'm glad that I stumbled upon this thread
Whew, that's a lot of stuff in that link you gave, definitely gonna make use of it, thanks again!
Flashize: Turn Shell Scripts Into Flashable Recovery Zips
Highlights
Automatically convert shell scripts to flashable zips with a single command.
Don't mess with 'ui_print' crap: standard output and error streams will work just fine.
Can be configured to create a logfile of the execution of the script.
Free software: uses GPL and LGPL version 3 and later licenses.
This is a discussion thread. New versions will not be announced here.
Please 'watch' the Github project to receive notifications. Thank you!
More Info -> HERE
Downloads -> HERE
XDA:DevDB Information
flashize, Tool/Utility for all devices (see above for details)
Contributors
Lanchon
Version Information
Status: Testing
Created 2016-02-12
Last Updated 2016-03-19
Flashize
Downloads -> HERE
Reserved
Wow this is awesome Lanchon!
Sent from my Nexus 6P using Tapatalk
This is so awesome! Thank you!
Lanchon said:
Flashize: Turn Shell Scripts Into Flashable Recovery Zips
Features
Automatically convert shell scripts to flashable zips with a single command.
Don't mess with 'ui_print' crap: standard output and error streams will work just fine.
Displays the script exit code and reports it back to recovery.
The script receives the full path of the zip being flashed as its first parameter.
(Other parameters reserved for future use.)
Free software: uses GPL and LGPL version 3 and later licenses.
For Linux and Un*x-like systems only: requires 'Bash' shell.
(It would be very easy to port to Windoze proprietary crapware, but I won't do it.)
Usage
flashize <input-script> [<output-zip>]
XDA:DevDB Information
flashize, Tool/Utility for all devices (see above for details)
Contributors
Lanchon
Version Information
Status: Testing
Created 2016-02-12
Last Updated 2016-02-12
Click to expand...
Click to collapse
thanks bro brilliant idea works perfect going to share on my Google +
I'd love for a way to use this script without having to use my computer and use my phone instead. I already placed the flashize script file into /data/local/Flashize and set it to 0755 perms. I noticed, though, that in order to execute the script, that the syntax of
Code:
./data/local/Flashize/flashize test.sh testing.zip
doesn't work. Also, just doing
Code:
flashize test.sh testing.zip
doesn't work either while I'm already in the directory. Now, I noticed that if I rename the file to flashize.sh and run the command
Code:
sh flashize.sh
it says this as the output:
Code:
Flashize (2016-02-12)
Usage: <input-script> [<output-zip>]
That means that it should work when I do
Code:
sh flashize.sh test.sh testing.zip
but it does not work. Instead I get this error:
Code:
mkdir: '/tmp' : Read-only file system
Any idea how I can make this script work on my phone? Is there a different location where I should put this script where this will work?
misterpyrrhuloxia said:
I'd love for a way to use this script without having to use my computer and use my phone instead. I already placed the flashize script file into /data/local/Flashize and set it to 0755 perms. I noticed, though, that in order to execute the script, that the syntax of
Code:
./data/local/Flashize/flashize test.sh testing.zip
doesn't work. Also, just doing
Code:
flashize test.sh testing.zip
doesn't work either while I'm already in the directory. Now, I noticed that if I rename the file to flashize.sh and run the command
Code:
sh flashize.sh
it says this as the output:
Code:
Flashize (2016-02-12)
Usage: <input-script> [<output-zip>]
That means that it should work when I do
Code:
sh flashize.sh test.sh testing.zip
but it does not work. Instead I get this error:
Code:
mkdir: '/tmp' : Read-only file system
Any idea how I can make this script work on my phone? Is there a different location where I should put this script where this will work?
Click to expand...
Click to collapse
you could remount rootfs rw, it's a ramdrive anyway
mount -o remount,rw / /
then the script could create /tmp like it wants to.
you might have to run it in a chroot though, cm and busybox only fill so many of the gaps between android and Linux.
bigsupersquid said:
you could remount rootfs rw, it's a ramdrive anyway
mount -o remount,rw / /
then the script could create /tmp like it wants to.
you might have to run it in a chroot though, cm and busybox only fill so many of the gaps between android and Linux.
Click to expand...
Click to collapse
I don't know what rootfs is... And is that the exact command I should run on my phone?
misterpyrrhuloxia said:
I don't know what rootfs is... And is that the exact command I should run on my phone?
Click to expand...
Click to collapse
exact
Code:
su
mount -o remount,rw / /
Please help us Windows guys with this. I have a bricked g stylo.This sounds like it could be my salvation!! Thanks either way.
Sent from my N9521 using Tapatalk
bigsupersquid said:
exact
Code:
su
mount -o remount,rw / /
Click to expand...
Click to collapse
So that got rid of that error but now I'm getting a new error:
Code:
[email protected]:/data/local/Flashize # sh flashize test.sh testing.zip
flashize[113]: zip: not found
Not sure what that means.
misterpyrrhuloxia said:
So that got rid of that error but now I'm getting a new error:
Code:
[email protected]:/data/local/Flashize # sh flashize test.sh testing.zip
flashize[113]: zip: not found
Not sure what that means.
Click to expand...
Click to collapse
are you running stock rom? older cm?
it can't find the zip utility. there may not be one.
newer cm can unzip and zip in terminal.
regardless, the android command line environment you're working with might not be complete enough for the script to work.
misterpyrrhuloxia said:
I'd love for a way to use this script without having to use my computer and use my phone instead. I already placed the flashize script file into /data/local/Flashize and set it to 0755 perms. I noticed, though, that in order to execute the script, that the syntax of
Code:
./data/local/Flashize/flashize test.sh testing.zip
doesn't work. Also, just doing
Code:
flashize test.sh testing.zip
doesn't work either while I'm already in the directory. Now, I noticed that if I rename the file to flashize.sh and run the command
Code:
sh flashize.sh
it says this as the output:
Code:
Flashize (2016-02-12)
Usage: <input-script> [<output-zip>]
That means that it should work when I do
Code:
sh flashize.sh test.sh testing.zip
but it does not work. Instead I get this error:
Code:
mkdir: '/tmp' : Read-only file system
Any idea how I can make this script work on my phone? Is there a different location where I should put this script where this will work?
Click to expand...
Click to collapse
the script doesnt work because its a BASH script. bash is the most common shell in linux. stupid google doesnt want GPL code in userland android so it cant be part of android, just like busybox cant.
it doesnt start because the first line "#!/bin/bash" tells the kernel that bash should be used to open it, and obviously bash is not found in /bin/bash in your phone.
you dont need to rename or chmod the script, you can just invoke it with "sh <name>". but then ASH, a different shell part of busybox, is running it. it was not designed to be run with ash, so no idea whether it should work.
DO NOT mount your system RW and run inappropriate scripts!!!! you can kill you OS!
ill take a look sometime and see if it can be hosted in android.
but first, one question: what is the use case? no use case, no code
bigsupersquid said:
you could remount rootfs rw, it's a ramdrive anyway
mount -o remount,rw / /
then the script could create /tmp like it wants to.
You might have to run it in a chroot though, cm and busybox only fill so many of the gaps between android and linux.
Click to expand...
Click to collapse
do not do this!
misterpyrrhuloxia said:
I don't know what rootfs is... And is that the exact command I should run on my phone?
Click to expand...
Click to collapse
in my script change the line:
td="/tmp/lanchon-flashize"
to some writeable folder you want to use, such as:
td="/sdcard/lanchon-flashize"
misterpyrrhuloxia said:
So that got rid of that error but now I'm getting a new error:
Code:
[email protected]:/data/local/Flashize # sh flashize test.sh testing.zip
flashize[113]: zip: not found
Not sure what that means.
Click to expand...
Click to collapse
and now you need to have the 'zip' binary installed. CM11 has it. dont ask me how to get one!
Lanchon said:
do not do this!
Click to expand...
Click to collapse
I've not had issues myself with overwriting the initrd files even since they reset to the stored boot.img versions on reboot.
but creating things in / would use ram at the least, and I imagine there's devices with overwriteable rootfs, so I definitely understand your warning.
apologies, didn't mean to hijack.
bigsupersquid said:
I've not had issues myself with overwriting the initrd files even since they reset to the stored boot.img versions on reboot.
but creating things in / would use ram at the least, and I imagine there's devices with overwriteable rootfs, so I definitely understand your warning.
apologies, didn't mean to hijack.
Click to expand...
Click to collapse
no prob, its just dangerous
Lanchon said:
in my script change the line:
td="/tmp/lanchon-flashize"
to some writeable folder you want to use, such as:
td="/sdcard/lanchon-flashize"
Click to expand...
Click to collapse
Lanchon said:
and now you need to have the 'zip' binary installed. CM11 has it. dont ask me how to get one!
Click to expand...
Click to collapse
So I got it working in Android!! First of all, I had to change in the script the line
Code:
td="/tmp/lanchon-flashize"
to
Code:
td="/sdcard/lanchon-flashize"
Then I installed a zip utility for Android that I downloaded from here. Then I decided that I wanted a flashable zip. So attached below is a flashable zip that does these things:
Places your Flashize script in /data/local/Flashize.
Installs the Android Zip utility to be able to zip files in the terminal (like unto the utility in CM that you mentioned above).
Creates a command line alias in /system/etc/mkshrc so that way all you have to do to execute the Flashize script is type the command "flashize" in the terminal. This is the same type of aliasing that's common in Linux systems with the ~/.bashrc file.
So after flashing this, all you have to do on your phone to create a flashable zip with Flashize is to navigate to the directory where your shell script is, and run the same command as what's in the OP:
Code:
su
flashize <input-script> [<output-zip>]
What do you think, @Lanchon?
If this helped you out, hit thanks!
This has only been tested on the Motorola Nexus 6 running Pure Nexus rom.