Reverse Tethering, G1 use the PC ADSL Connection - G1 Android Development

I am using now the G1 connected wifi to the PC Network Card (without a Wireless router)
It is simple if you have a network card that support AP Mode, I am using on the PC a PCI Card Kraun 300N that support AP mode.
After installing the driver and the utility, I have an icon in the tray Ralink Wireless Card, and with the right click I can choose AP Mode and setup the Adapter as Access Point with the security too.
Don't forget to share the connection:
Right-Click the connection you are currently using to access the internet. Click Properties. Go to the Advanced tab and check “Allow other network users to connect through this computer’s Internet connection”.
This is simple if you have an adapter that support AP Mode, but before the Kraun Card I was using an usb wifi adapter that there wasn't the AP Mode, and with the Ad Hoc connection that normally you use for PC to PC, there was no way to recognize the PC Wifi on the G1.
I hope someone find a way to use a reverse tethering with a simple ad hoc connection.

i'm trying to find out a way to connect to a computer with ad hoc and share the internet on my G1. i'll let you know what i find

IsmailBhai said:
i'm trying to find out a way to connect to a computer with ad hoc and share the internet on my G1. i'll let you know what i find
Click to expand...
Click to collapse
OK, so the OP is saying that he's sharing his PC's internet connection via wifi with his G1.
You're talking about the opposite, correct? Using the data connection from the phone to get a PC on the internet?
There are a couple of apps that do this, but I think they require the phone to be rooted. There's a wifi tether program (for rooted phones) where the G1 becomes a 3G WAP and PCs can connect to the phone and through the phone access the internet. There's also an app or two to do it via the USB connection (I'm not sure if those require root or not)
Here's one app. I know I've seen it recommended, but I don't personally know anything about it.
http://www.junefabrics.com/android/index.php

nope, we are both talking about
PC has internet.
G1 has no inet
set up ad hoc on computer
connect G1 (figure out a way to connect to an adhoc network)
share PC's inet through windows ICS.

PC internet to G1 through USB
Okay, I know how to use an AD-HOC connection using the wireless, but how about using the USB connection to get internet to the G1 using the PC's internet connection...I have searched and have not found anything on this Unless I am blind does anyone know how this can be done?

Related

using HTC touch cruise as a Wifi adapter for pc via usb

hi, first post here.
i have an HTC Touch Cruise with the default factory rom and it has an internal wifi antenna... I'm trying to setup a wireless network with my neighbour but my PC doesn't have a wifi adapter (and i don't have the money for one right now), so i was wondering if it is possible to make the pda some sort of adapter for the pc to use via usb/bluetooth?
One of the first thing we'll do if it's possible is to crack the wep key cause he can't rembemer the password and a hard reset to the router doesn't erase it
can also anyone suggest some tools to do that job?
I was thinking of running these tools on the pc since the pda will only serve as some kind of NIC...
hope someone can help...
Edit: Forgot to mention that i also have a bluetooh adapter on the pc if that comes of any use
P.S: Great Forum btw
There's an internet sharing option in Windows Mobile 6. Connect to the wifi network using the cruise and configure the internet sharing options. Then connect the cruise to the PC via USB and the PC should be able to access the net via the cruise's wifi connection.
MeeMk said:
There's an internet sharing option in Windows Mobile 6. Connect to the wifi network using the cruise and configure the internet sharing options. Then connect the cruise to the PC via USB and the PC should be able to access the net via the cruise's wifi connection.
Click to expand...
Click to collapse
LOL Windows makes it easy for us!
MeeMk said:
There's an internet sharing option in Windows Mobile 6. Connect to the wifi network using the cruise and configure the internet sharing options. Then connect the cruise to the PC via USB and the PC should be able to access the net via the cruise's wifi connection.
Click to expand...
Click to collapse
i've been snoping around that part, but it asks me for a conection name in which is on <none> cause i don't have a connection configured... if i go to the connections part, i don't know what kind of connection to create as it asks me to create a VPN or an ISP connection...
how can i configure internet sharing propperly?
would i be able to crack the wep key on the pc that way? (cracking it on the pc via the pda)
1. The program you'ew looking for is WmWifiRouter 1.20, it enables you to use your phone as a WiFi -> USB adapter...
2. Ask your neigbour to use Cain on his pc... it can reveal what's written in the password boxes (if it's XP or older), reveal it in the WiFi connection settings on the pc... Whith this you won't need any WEP cracking... also he should be able to change the WEP key without the original... if he doesn't know the access code to the router that's THE problem, check the manual for default values, and try those first before attempting anything else...
3. For configuring a 3G/HSDPA/GPRS/EDGE connection you'll need a data plan from you mobile carrier... after that you can configure the connection on your PDA.
VPN stands for Virtual Private Networking (read Wiki for more info)
ISP stand for Internet Service Provider (this'll be the one you'll need)​
gnick666 said:
1. The program you'ew looking for is WmWifiRouter 1.20, it enables you to use your phone as a WiFi -> USB adapter...
2. Ask your neigbour to use Cain on his pc... it can reveal what's written in the password boxes (if it's XP or older), reveal it in the WiFi connection settings on the pc... Whith this you won't need any WEP cracking... also he should be able to change the WEP key without the original... if he doesn't know the access code to the router that's THE problem, check the manual for default values, and try those first before attempting anything else...
3. For configuring a 3G/HSDPA/GPRS/EDGE connection you'll need a data plan from you mobile carrier... after that you can configure the connection on your PDA.
VPN stands for Virtual Private Networking (read Wiki for more info)
ISP stand for Internet Service Provider (this'll be the one you'll need)​
Click to expand...
Click to collapse
From what i've read on this forums, WmWifiRouter is for routing my 3G/HSDPA/GPRS/EDGE to other phones via wifi, but correct me if i'm wrong lol.
what i want to do is basiclly have wifi on the pc using the pda's built in antenna...
Thanks for the tips on the router, we'll try that
i know what those acronyms mean i just don't know how to configure them for the internet sharing program...
The ICS only shares your mobile internet with one computer be it on USB or BT, it can't act as a wifi adapter... The WMWifiRouter uses the ICS, but with different settings, that can't be utilized manualy... you can create an Ad-Hoc network with some registry tuning, but that's about it.. no DHCP, no NAT, no WEP, nothing that makes it easy, and secure...
Also I mentioned a version number for WmWifiRouter... the leatest (1.20) supports the Wifi -> USB mode, so with this your PDA can act as a WiFi adapter.
Also these PDAs weren't ment to be used this way, so expect high-level battery drainage, you'll need atleast 2 USB ports to charge it while using WMWiFiRouter.
But you can download the trial from the site, and see for your self... you won't loose anything with trying...
gnick666 said:
The ICS only shares your mobile internet with one computer be it on USB or BT, it can't act as a wifi adapter... The WMWifiRouter uses the ICS, but with different settings, that can't be utilized manualy... you can create an Ad-Hoc network with some registry tuning, but that's about it.. no DHCP, no NAT, no WEP, nothing that makes it easy, and secure...
Also I mentioned a version number for WmWifiRouter... the leatest (1.20) supports the Wifi -> USB mode, so with this your PDA can act as a WiFi adapter.
Also these PDAs weren't ment to be used this way, so expect high-level battery drainage, you'll need atleast 2 USB ports to charge it while using WMWiFiRouter.
But you can download the trial from the site, and see for your self... you won't loose anything with trying...
Click to expand...
Click to collapse
Ok, i got the 1.20 trial on the pda and got it working in Wifi -> usb mode, but now how do i search wireless networks on the pc? i noticed it is detected as wired connection, not a wireless one...
You don't need to quote the previous reply...
The PC sees a wired connection... so? You thought that, you can use the windows Wireless Zero Config for searching? I guess you just found out that you can't...
The wireless connection is managed by your PDA, connect to a wireless network with you PDA after you set up the WiFi -> USB...
gnick is correct, I am actually using my phone at home as a Wifi Adapter with WMWifiRouter 1.25 and it works very well. And YES, you have to connect your Wifi on phone first, then connect phone to computer via USB and (in my case) Windows 7 does the rest... I believe Vista also. Not sure about XP, don't have an XP machine, well I do, but it's off sitting in the closet (in timeout for not behaving good.. hehe)

Proxy on two computers ?

Is it possible to link two computers to my G1 to give both of them internet via the G1 proxy ?
Well if you use the wifi method you could use your phone as an access point and multiple computers could connect wirelessly.
If you don't have wifi on all computers you can use ad-hoc mode to connect to the G1 on a wifi computer and connect the rest by USB/network cable and share the net.
How can I use my phone as an access point?

CradlePoint with Sensation?

I tried to follow this tutorial to use a CradlePoint CTR350 router with the Sensation
http://www.cradlepoint.com/about/blog/an-android-powered-cradlepoint-router
I do not see the "Mobile Broadband Connect" USB connection mode. I did see a USB Tether option, which asked me Mac of PC and I figured the router would be more like a PC and I chose PC. The phone would not share its internet connection with the router.
Has anyone been able to use a Sensation with a CradlePoint router, and if so, which router and what settings did you do on the phone?
Thanks
Any comments?
Thanks in advance.
I really would like to be able to connect the Sensation to a Cradlepoint router so it can be a backup Internet source if my wireline Internet service is down. Any ideas on getting Sensation to work with CradlePoint?
tk_xda said:
I really would like to be able to connect the Sensation to a Cradlepoint router so it can be a backup Internet source if my wireline Internet service is down. Any ideas on getting Sensation to work with CradlePoint?
Click to expand...
Click to collapse
I had a quick look at the web site you gave. If I understand it, it's a USB -> WIFI router. Such that the Cradlepoint WIFI routes via USB and 3G (phone) to the Internet.
Assuming that's the case I can't see anything in particular why it shouldn't work.
Can you use USB tethering to connect a single PC to the Internet via USB/3G ? (If this works and my assumptions are correct the phone is working fine).
Do you need to configure the Cradlepoint device in any way ?
In the absence of this, the phone can act as a WiFI hotspot, does this not give you enough connectivity to the Internet?
gol_n_dal said:
I had a quick look at the web site you gave. If I understand it, it's a USB -> WIFI router. Such that the Cradlepoint WIFI routes via USB and 3G (phone) to the Internet.
Assuming that's the case I can't see anything in particular why it shouldn't work.
Can you use USB tethering to connect a single PC to the Internet via USB/3G ? (If this works and my assumptions are correct the phone is working fine).
Do you need to configure the Cradlepoint device in any way ?
In the absence of this, the phone can act as a WiFI hotspot, does this not give you enough connectivity to the Internet?
Click to expand...
Click to collapse
I actually have Mac and I often use the wifi tethering. I only tried USB tethering with the Cradlepoint. The first time the phone asked me Mac or PC and I chose PC, thinking Cradlepoint would be similar to PC. I don't know how to get it to ask PC or Mac for USB tethering again. I would like to be able to connect an Ethernet cable to Cradlepoint to get to the Internet. That would be for the scenario my home Internet is down, then I would want to connect my main router WAN to the Ethernet of the cradlepoint and get Internet through the cell phone.
Anyone have any success in using a cradlepoint?

need a way for a pc connected via android usb tethering to connect with other device

So i have a pretty complicated network setup right now due to my normal home internet dying and technicians never coming to fix it, so i'm now using my phone on 4G, use the wifi hotspot on that phone, go downstairs, use another phone to connect to that hotspot and use usb tethering to get internet on my pc.
The issue right now is that i can't seem to be able to communicate with my desktop pc (connected by usb tether) with my laptop (connected on wifi hotspot)
any idea on what software i could use to fix that?

Can't access home network when phone is usb tethered?

My android phone is usually on wifi at home. My laptop has some wifi chip/antennae issues so I have to either connect to the network via a lan port or, alternatively, use android phone usb tethering. If I am connected via the latter, on the laptop I observe that I cannot connect to the router network - I cannot even access the router login page.
I don't know a simple term for this feature. I guess it works like a network switch. But is there any app that, when enabled would help me connect my laptop (when usb-tethered) to the wifi network?

Categories

Resources