just wanna check, to do a hard reset, up rom for my stealth its to press the power button, OK button and the Windows button all together at the same time right?
Then on e screen it shows
-IMAGE UTILITY-
Battery power is under 50%
although my pin is change 100%
help me
Related
I ve a SP5M which Cant Go out of FLIGHT MODE.Itried eeverything but still cant enter the Reset menu...
The Device shows Flight mode and On down left side shows Unlock.
It s an I-MATE SP5M.
I need a New rom for it if available.Link please.May be by flashing it i can get it in normal mode.
Thanks.
Try to Hard Reset first (Backup important stuffs!)
Power Off Phone then Press the 2 softkeys and Hold then press the Power Button, release right away the Power Button while the backlight is not lit yet, then just continue holding the 2 softkeys and it will ask you the hard reset confirmation..if it still continued to boot, you might had a bad timing.
Have you tried a quick push on the power button, this will give you the Quick List options of fight mode, key lock etc.
My vox keeps on restarting when the microsd card is inside, and when it's outside its just doesn't getting to the home screen. It's getting stuck on the second HTC logo.
It is after I did soft reset to my device after I used the SDA_ApplicationUnlock and the new comm manager style (list):
http://forum.xda-developers.com/showthread.php?t=355490
I've tried hard reset:
http://www.modaco.com/index.php?showtopic=255861&mode=threaded
And it doesn't seam to work... ):
When I push all the 3 keys altogether when the VOX is off the phone doesn't even turn on, just pushing only the power button turning the VOX on.
So, how can I rescue my VOX?
By the way, I soft reset my VOX by pulling outside the SIM slot and then pushing it back inside.
to hardreset you have to :
1. turn off the phone
2. press and keep pressed the 2 softkeys
3. press power button for about 2 sec
4. release the power button, but keep the other 2 keys pressed about one more sec
5. a black screen will aprear with some white text asking for hardreset confirmation.
good luck
Nothing happens… only when I press just the power button the phone turning on.
Maybe I don't know what are the two softkeys?
Help!
the sokt keys are the 2 keys between the home and back keys and the d-pad, ie the keys above "1" n "3"
hth
Well, I was wrong about the two softkeys. But its still doesn't seem to work.
When I follow the instruction above the phone is turning on, as usual, but nothing else happens (the phone still gets stuck at the second HTC logo).
when you press the power button even if the screen lights up keep the pw button pressed for 2 sec then release it but keep the other 2 but. pressed
Still doesn't work, its continuing to the screen with the "windows mobile" logo.
I had the same promblem, fixing by removing SIM and go ahead
1. turn off the phone
2. press and keep pressed the 2 softkeys
3. press power button for about 2 sec
4. release the power button, but keep the other 2 keys pressed untill...
5. a black screen will aprear with some white text asking for hardreset confirmation.
Greetz BAUr SImon
Hi It still doesnt seem to work with me.
Because i have the same problem and i tried to do all the things from above.
This is bad. man my phone doesnt work.
That's strange, if the phone can go as far as the second htc screen I thought it should be able to hard reset.
Also make sure usb cable is not plugged in while you try to hard reset. I just tried it and I don't get the white text on black screen when I have the cable in.
ן succeeded in doing a HR a couple of days ago, but I forget to write it down here.
The instructions are:
1. Take out the battery of 5 sec.
2. Put in the battery.
3. Press the two soft keys (above 1 and 3), and don't stop pressing.
4. Press the power button. The sec the green light blink, next to the HTC logo, you remove your finger from the power button (this is what no one told me).
5. You are asked to press the SEND button to confirm the HR.
lastOne said:
to hardreset you have to :
1. turn off the phone
2. press and keep pressed the 2 softkeys
3. press power button for about 2 sec
4. release the power button, but keep the other 2 keys pressed about one more sec
5. a black screen will aprear with some white text asking for hardreset confirmation.
Click to expand...
Click to collapse
lastOne said:
when you press the power button even if the screen lights up keep the pw button pressed for 2 sec then release it but keep the other 2 but. pressed
Click to expand...
Click to collapse
are you sure nobody told you that ?
Sorry, let me rewrite myself:
I didn't fully understand this instruction, and if I didn't understand it good enough maybe other people would understand it as me. So I wrote a farther instruction.
Hello all! Sorry to be a goof, but I cannot figure out how to
hard reset/cold boot my Qtek 8310 with the soft keys (comm mgr & camera) + power on. I only manage to get to the boot loader and it gives me no options.
I know I have done it before and on other devices there was usually a menu choice that enabled you to hard reset / go to bootloader.
I would be very grateful for advice on this topic!
Thanks for a great forum!
Turn off the phone and hold left and right soft buttons (start and contacts) then swith on pushing a power button about 1sec. When you see blask screen press 0.
Understand?)
another way: Turn off the phone and hold camera button, after that insert USB cable. Wait 3 sec the bootloader will show.
you have 4 buttons on ther bottom of the screen
press the right on and left one and power in the same time
ask to factory default tape 0
then the fone hard reset
Thanks to GSM-CLINIQUE.COM
I've been trying this over and over and all I get is the initial bootup screen.
I hold down the Volume Down, Enter (center circle button) and then use the stylus to hold down the Reset button. I hold all 3 down at the same time.
Every time I do this the phone reboots as if I only pressed the reset button using the stylus.
I've tried holding all 3 down for over 5 seconds and I've also tried releasing the reset button first and continuing to hold down the Volume Down and Center/circle button (which is the way described here on xda) and all it does is do what I believe is a soft reset.
Shouldn't I be seeing a screen saying it's going to delete all data?
What am I doing wrong?
EDIT: I should mention, I just finished installing TAEL's new rom ([ROM][WWE][PRO|FUZE][WM6.5.5.5|23518][14JAN10] TAEL ROM v3.23518 • SENSE EDITION • ), which is a windows mobile 6.5 rom, but every time I try the hard reset it's showing windows mobile 6.1. Although it does show TAEL rom at the initial screen where it also shows the wrong windows mobile version.
hard reset fuze
You must keep holding the volume up and the circle button pressed AFTER you remove the stylus. this should take you to the RGB screen and then instructions on how to continue.
Good luck
Actually, that method didn;t work for me either.. but this one did...
Take out the battery... put the battery back in...
Press and hold the CENTER BUTTON and VOLUME DOWN... While still pressing them press and hold the POWER button. Then you will get a screen saying press volume up to hard reset...
I hope that works for you
That was so easy! Thanks.
Teej53214 said:
Actually, that method didn;t work for me either.. but this one did...
Take out the battery... put the battery back in...
Press and hold the CENTER BUTTON and VOLUME DOWN... While still pressing them press and hold the POWER button. Then you will get a screen saying press volume up to hard reset...
I hope that works for you
Click to expand...
Click to collapse
Xino1 said:
You must keep holding the volume up and the circle button pressed AFTER you remove the stylus. this should take you to the RGB screen and then instructions on how to continue.
Good luck
Click to expand...
Click to collapse
Many people often let go of the buttons before it turns back on.
Note: You can release the reset button but still have to hold Vol Down and Center to get to the Bootloader.
i have samsung SGH i780 windows mobile phone. it has a problem power button not working correctly. power button touch a bit mobile is switch off after difficult to switch on when i remove a battery and plug again mobile is switch on without pressing power button. have any solution to fix the problem.
thanks
sounds like you need to open the device and look inside, my guess is that the plastic power button is not inserted/aligned properly.
(which is why it turns off and on the way it does)
(probably due to a recent drop of your device)
you should view the wiki for your device on how to get inside to have a look.
im pretty sure this is whats wrong with your power button dude = sometimes this happens to me when putting my device back together.
(power button needs re-aligning)
Rn
Red Hook and press the green call key while pressing the power key, hard reboot confirmation screen appear, press the space bar to confirm, and then the phone restart. After the initial setting, the screen calibration (points 5 times the cross), the initial state of the mobile phone back to just brush up ROM. After loading the program, and personal information are lost, so hard before the restart must be careful to save personal information.
____________________________________
http://www.2deals.net/
http://www.cpu-cooling-fan.com/
http://www.canonbatterycharger.co.uk/
i do not think his device needs a hard reset.
(it is defo the alignment of the power button inside the device!)
Rn