HI,
I am new to this forum amd hope u people can help me with my problem.
I have a new HTC touch and i am new to this smart phones.
My problem is whenever i connect my head phone with my phone it automatically dials the last missed call.I will not be knowing it at all.
And it keeps on dialing in loop if the other person doesn't picks up.
Is there any way to diasable this option?
FYI. I am also using SPB shell
Regards,
Shin
Related
Hi there, I am using VJgrace latest 3.4 ROM, I realized that nowadays, sometimes I would not be able to receive incoming calls, my friends and relatives have complained that I do not pick up their calls, they even showed me the proof of their call logs. They said there were dialing tone. So one day, I tried for myself and true enough, at times, the phone will just light up from idle, but it will not say that there is an incoming calls. When this happen, I cannot make outgoing calls as well, when I try to dial someone, it just hang there.
Any solution? Is this a radio or ROM problem?
I have run the GSM update
I faced the same problem too. I thought my friends were joking. just called myself to confirm. true enough the phone lights up for a second or two then it goes back to sleep.
this is serious. am thinking of going back to WM 5
Really? Wow. That's a new one. I guess I haven't seen this. illi - would you really go *all* the way back to WM5? Are you saying this is a problem in every WM6 ROM you have installed? I'm surprised... I've never seen it on my phone. But I don't get too many calls during the day. And I reboot my phone every 2 or 3 days just for good measure.
bipinsen said:
Really? Wow. That's a new one. I guess I haven't seen this. illi - would you really go *all* the way back to WM5? Are you saying this is a problem in every WM6 ROM you have installed? I'm surprised... I've never seen it on my phone. But I don't get too many calls during the day. And I reboot my phone every 2 or 3 days just for good measure.
Click to expand...
Click to collapse
i cant afford to loose calls. some friends had complained since a few months back. so i suspect its all WM6 ROMs not just vj's.
i think it happened when the device is syncing because i receive lots of emails. so at that time the gprs/edge is being use. THIS IS MY WILD GUESS ONLY!! I noticed it (the device awakes then back to sleep) once while on active sync and at that moment emails were being downloaded from my email server.
How can yew trouble shoot this problem?
illi said:
i cant afford to loose calls. some friends had complained since a few months back. so i suspect its all WM6 ROMs not just vj's.
i think it happened when the device is syncing because i receive lots of emails. so at that time the gprs/edge is being use. THIS IS MY WILD GUESS ONLY!! I noticed it (the device awakes then back to sleep) once while on active sync and at that moment emails were being downloaded from my email server.
How can yew trouble shoot this problem?
Click to expand...
Click to collapse
Do you have this checkbox selected? I'm not sure if it makes a difference, but it's one thing I saw.
bipinsen said:
Do you have this checkbox selected? I'm not sure if it makes a difference, but it's one thing I saw.
Click to expand...
Click to collapse
not too sure but will check next time i active sync. anyway i rarely sync with my pc so i doubt thats the problem - i noticed once while hooked to pc the phone awakens and then sleep. i use mail2web.com's microsoft exchange to sync my emails. i active sync only to do spring cleaning on my device and SD.
if karhoe subscribe to the same telco as me than i suspect its the operator. (hello karhoe you there;-))
I have this problem even when the phone is not connected to Active Sync, when i'm outside. The phone just light up, and then poof, gone. Well, I am using DiGi telco. But I don't have this problem when using Andot's PEE, don't have it when using 3.0 ROM, only recently when I started using 3.1, had this problem, after so long, then use 3.4, still have it
I had this issue with WM5.. now with WM6 I didn't found (yet) this issue. (using EA ROM)
This is a quote of one of my posts (Oct 7 2006, 18:43, modaco):
i think this is a software issue..
i have a spv c600 and have problem with the telephony part (and many other spv c600 users)
1. some times when somebody is calling me the phone does not announce in any way that i have a call.
2. other times when somebody is calling me the phone send automatically a busy tone to the caller and again does not announce me that somebody has called me.
3. and other times when somebody is calling me, the caller is announced by the robot that 'the user is in an uncovered area or has the phone turned off' or it divert it to voice mail (if the WM user has voice mail active. i have it off)
however, point 1 and 2 can be 'detected' by eye on call (phonesharpen). only detected (no answer, no nothing).
- in the first case, a window with caller information is displayed as long as the caller is calling you.
- in the second case, a window appears and disparears extremly fast
to bad that the phonesharpen does not log the detected calls . i have mailed them about this, but on answer..
i gues the problem is the native telephone application
so .. in conclusion WM smartphones are not recommended for people who want to use them as a phone.. who knows what important calls you miss.. i hope this will be fixed someday
Click to expand...
Click to collapse
@karhoe you should tell this to NiTroGeN and to VJgrace
Gentlemen, I suspect this issue is somehow connected to currently selected homescreen. I had this issue on WM6 build 18120 homescreen with VOIP plugin, but when I chose another one not containing VOIP info, this issue has gone
ega2oo2 said:
Gentlemen, I suspect this issue is somehow connected to currently selected homescreen. I had this issue on WM6 build 18120 homescreen with VOIP plugin, but when I chose another one not containing VOIP info, this issue has gone
Click to expand...
Click to collapse
I tend to believe that it is caused by either of these problems:
1 - the telco (I'm subscribing to the same telco as karhoe)
2 - the voip plugin on the Homescreen
This is what I'll do: I shall deactivate the voip plugin. But I cant afford to unsubscribe from my current telco; it offers the cheapest unlimited data plan. LOL!!
I have a feeling that it is related to VOIP, I did configure my VoIP using the xml method, and then I also installed the VoIP fix button for communication manager. Now im using HTC Home screen and so far, so good
Every now and then, probably after using it for a couple of days, my TC gets problems with the phone function. First, it will not notify me of incoming calls, these get diverted to the voice mail. Second, when I try to make a call, it starts to dial, but the dialing never succeeds. After a minute or so of dialing it just ends the call.
I found out the following funny thing: when it is dialing, if I push the off-button at that time, the screen goes off and the sound comes on. I'm even properly connected to the person I'm trying to call!! So the connection was already there, I just can't hear anything, neither can the other person, until I push the off-button.
This behaviour doesn't happen all the time, just after a day or so of use. The solution is to soft-reset the device, not really a solution though in my opinion. Switching the phone off and on in the comm.manager doesn't help. Is there any bettter solution? I'm using the standard dutch ROM.
Thanks! Wouter
deechte said:
Every now and then, probably after using it for a couple of days, my TC gets problems with the phone function. First, it will not notify me of incoming calls, these get diverted to the voice mail. Second, when I try to make a call, it starts to dial, but the dialing never succeeds. After a minute or so of dialing it just ends the call.
I found out the following funny thing: when it is dialing, if I push the off-button at that time, the screen goes off and the sound comes on. I'm even properly connected to the person I'm trying to call!! So the connection was already there, I just can't hear anything, neither can the other person, until I push the off-button.
This behaviour doesn't happen all the time, just after a day or so of use. The solution is to soft-reset the device, not really a solution though in my opinion. Switching the phone off and on in the comm.manager doesn't help. Is there any bettter solution? I'm using the standard dutch ROM.
Thanks! Wouter
Click to expand...
Click to collapse
Does a different radio ROM help?
I'm a bit scared for doing that... It hasn't always been like this, so I'd rather send it back I think.
deechte said:
I'm a bit scared for doing that... It hasn't always been like this, so I'd rather send it back I think.
Click to expand...
Click to collapse
If it's under warranty, do that!
deechte said:
Every now and then, probably after using it for a couple of days, my TC gets problems with the phone function. First, it will not notify me of incoming calls, these get diverted to the voice mail. Second, when I try to make a call, it starts to dial, but the dialing never succeeds. After a minute or so of dialing it just ends the call.
I found out the following funny thing: when it is dialing, if I push the off-button at that time, the screen goes off and the sound comes on. I'm even properly connected to the person I'm trying to call!! So the connection was already there, I just can't hear anything, neither can the other person, until I push the off-button.
This behaviour doesn't happen all the time, just after a day or so of use. The solution is to soft-reset the device, not really a solution though in my opinion. Switching the phone off and on in the comm.manager doesn't help. Is there any bettter solution? I'm using the standard dutch ROM.
Thanks! Wouter
Click to expand...
Click to collapse
I'm experiencing exactly the same problem since a week with bepe 0.67 rom.
Please, anyone with the same problem?
sounds a little similar to this...
http://forum.xda-developers.com/showthread.php?p=2374406
hopefully that ^ solves the problem
Thanks for your reaction. It's not the same problem though, when my problem occurs it stays. I can never make a phone call normally again anymore, nor receive a call. I have to soft reset.
Kukatrap said:
I'm experiencing exactly the same problem since a week with bepe 0.67 rom.
Please, anyone with the same problem?
Click to expand...
Click to collapse
Do you have Webis Note2Self installed?
I cloned my device's software and settings to a new one from the shelve. After a few days the problem occured again. So it's probably not a hardware problem in my case. With the problem occuring, I changed the phone settings from Auto to GSM and the UMTS settings from Auto to GSM(900+1800)+UMTS(2100), both didn't solve the problem when it was occuring.
Then I opened Memmaid and discovered there was an instance of Note2Self (Webis) under the running processes. I closed that one down and closed Memmaid and then the problem was gone!!
On their forum, other users report about audio issues. I'm looking in to this further. I'm using N2S 2.01 build 2326.
[edit]
Yes! Upgrading to version 2.03 solved my problem! Finally!
deechte said:
Do you have Webis Note2Self installed?
Click to expand...
Click to collapse
Yes, I am!!
I'll upgrade, thanks.
I had the same issue with the standard WM6 ROM thats the whole reason I changed to Diamond R4 ROm, has not happened since then. One thing I did notice is that I had my phone in my hand and it came out of sleepmode by it's self and 3 minutes later after putting it back to sleep I receive a message to say I had voice mail. Now I am thinking that the phone knew a call was comming in but it was to lazy to ring so it just sent it to voice mail. When I tried to call voice mail the phone connected but there was no sound. I had to power cycle the phone for it to work again.
HI,
I am new to this forum amd hope u people can help me with my problem.
I have a new HTC touch and i am new to this smart phones.
My problem is whenever i connect my head phone with my phone it automatically dials the last missed call.I will not be knowing it at all.
And it keeps on dialing in loop if the other person doesn't picks up.
Is there any way to diasable this option?
FYI. I am also using SPB shell
Regards,
Shin
had the same problem here... there is a way to bypass it run the attached cab file
Thanks
Thanks a lot mohammed. I will try this and let you know.
kkshinoj said:
Thanks a lot mohammed. I will try this and let you know.
Click to expand...
Click to collapse
and go on my website of-course!
Hi all!
I have a small problem with my LG KS20. Probably caused by a beta version of a piece of software I installed. The problem persists even if I uninstall it, so I'm not sure its because of that.
Sometimes when I call somebody I hear two almost simultaneous call tones instead of one. This was happening all the time. The problem know is that one of the call tones persists even after the call is answered and even after I hang up. I have to soft-reset in order to stop it!
Any ideas?
you could try using SPB Phone Suite
im just guessing here, but you could install the trial version, assign a new ringtone and see if ur problem is fixed.
if its a hardware issue i dont think people here could help as they focus on HTC made devices.
gud luk!
Hello Guys and Girls....every so often when i'm checking out custom roms...i will come across an option that will allow me to video call someone. Everytime i tried it out...i hear the phone ringing, see myself and then it hangs up. What is this program about? And what are the proper uses for it? I'm sorry but i don't know the exact name for the program, it's pretty much the standard phone dial pad but with a video feature.