Database Info

[NIGHTLY][ROM][FRG83] CyanogenMod 6 for vendor Bravo (HTC Desire GSM)

This thread is reserve for nightly build of CyanogenMod Rom for HTC Desire GSM (cdma version here)
CyanogenMod is a free, community built distribution of Android 2.2 (Froyo) which greatly extends the capabilities of your phone.
Code:
** These CyanogenMod builds are highly experimental and unsupported.
**
** Please refrain from submitting bug reports for any issues
** you may encounter while running one of these builds.
**
** Submitting bug reports on nightly builds is the leading
** cause of male impotence.
What are Nightly build? Auto compiled build of the latest CyanogenMod source from github. This version change each night and aren't officialy supported.
If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
Warning : Not for new user, flash this build only if you know what you are doing !!!
INSTRUCTIONS:
- First time flashing CM 6 to your Desire (or coming from another ROM)?
1. Root your device and install Clockwork Recovery (Unrevoked method is recommended).
2. Do a Nandroid backup!
3. Update your radio if needed (720p require 5.x radio)
4. WIPE (wipe data/factory reset + wipe cache partition)
5. Install the ROM
6. Optionally install the Google Addon
- Upgrading from earlier CM6?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
There are no Google Apps bundled with CM ROMs, because Google asked Cyanogen to remove copyrighted apps, after flashing rom don't forget to flash Google Addon package if you want it.
Latest version: http://mirror.teamdouche.net/?device=bravo
before flash is recommended to check the md5sum
CyanogenMod Enhancement:
ChangeLog / Twitter
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
thank's to gatsu_1981 and imfloflo for inspiration

Rooting Guide
http://forum.xda-developers.com/showthread.php?t=788044
Google Addon: latest HDPI-20101114
Other release http://goo-inside.me/google-apps/
Radio Firmware: 5.x radio required (GSM ONLY)
Desire GSM radio thread
Read/Write Access System Partition (S-OFF)?
Thank's to AlphaRev [site] [xda]
Low storage for apps?
Flash the AlphaRev HBOOT Bravo N1Table (Require S-OFF)
Follow this instrunction for update without data lost (aka no data wipe)
Still low storage for apps?
Install an A2SD solution: Firerat or Darktremor
i recommend the Firerat solution: CM specific, less space usage 25kb vs 6mb, bind mount, no boot loop, auto restore after cm rom update (from 1.35b)

Fantastic, thanks Kali!

bemymonkey said:
Fantastic, thanks Kali!
Click to expand...
Click to collapse
+1
And don't post questions before reading the 300+ pages of this thread: http://forum.xda-developers.com/showthread.php?t=719544
Just kidding. But I thought a reference to the old thread could be useful.

yuo should add a link to alpharevs s-off and modified partition table

deleted .

the developt is in 6.1 cyanomod nightly updated right?

Latest nigthlies have been rock solid for me. My only complaint is the annoying credential storage password, which I must enter every time I reboot the phone if I want to connect to 802.1x wifi networks. Other than that, 16x have been flawless.

*cheers kali on*
Finally an up to date thread. Reading your post I learned something. I didn't know firerat a2sd now works with cyanogen.
Anyone got experience migrating from dta2sd to firerat?
Swyped with my S-OFF'd brain using teh internetz

Is there a patched Amon Ra recovery image that allows you to use the N1 partition table ?

why woud you patch it?? just use n1 table and default amon ra

madman_cro said:
why woud you patch it?? just use n1 table and default amon ra
Click to expand...
Click to collapse
So would I be correct in saying that all I have to do is "fastboot flash hboot bravo_alphaspl-n1table.img" followed by a full wipe.

ganjamu said:
So would I be correct in saying that all I have to do is "fastboot flash hboot bravo_alphaspl-n1table.img" followed by a full wipe.
Click to expand...
Click to collapse
what i did was
fastboot erase cache
fastboot flash hboot bravo_alphaspl-n1table.img
fastboot erase cache
fastboot erase system
fastboot erase userdata
fastboot flash recovery blablabla
wiped all from recovery and installed rom

madman_cro said:
what i did was
fastboot erase cache
fastboot flash hboot bravo_alphaspl-n1table.img
fastboot erase cache
fastboot erase system
fastboot erase userdata
fastboot flash recovery blablabla
wiped all from recovery and installed rom
Click to expand...
Click to collapse
Thanks! I will give it a shot tonight and let you know how it goes.

Would this also work?:
nandroid backuo
fastboot erase cache
fastboot flash hboot bravo_alphaspl-n1table.img
fastboot erase cache
fastboot erase system
fastboot erase userdata
fastboot flash recovery blablabla
nandroid restore

stingerpl said:
Would this also work?:
nandroid backuo
fastboot erase cache
fastboot flash hboot bravo_alphaspl-n1table.img
fastboot erase cache
fastboot erase system
fastboot erase userdata
fastboot flash recovery blablabla
nandroid restore
Click to expand...
Click to collapse
Yes! Absolutely no problem... (but if you already have recovery, then there is no need to flash a new one)

Am I the only one having problem with build163? The zip won't install from my recovery, just stating it's 'bad'. I already redownloaded it. It unzip's fine on my linux box. I even rezipped it but my recovery keeps refusing to start the install process.
I'm a bit stumped here.

dipje said:
Am I the only one having problem with build163? The zip won't install from my recovery, just stating it's 'bad'. I already redownloaded it. It unzip's fine on my linux box. I even rezipped it but my recovery keeps refusing to start the install process.
I'm a bit stumped here.
Click to expand...
Click to collapse
Have you tried diasabling signature verification?

vnvman said:
Have you tried diasabling signature verification?
Click to expand...
Click to collapse
It's disabled by default. It just says it can't read the .zip file. If I _enable_ verification it says it can't read the footer from the .zip. If I disable verification again it just says "can't open /sdcard/cm_bravo_full-163.zip (bad)".
I also have the same with build 162. I flashed pretty much every cm-nightly in the last few months and now all of a sudden this? What am I doing wrong .
I just installed the miui-desire.zip file again that was on my sdcard and it installed without a hitch. This is getting annoying .
EDIT: Solved it. Apparently there is a bug in my recovery. If I use the recovery the mount my sdcard over USB, afterwards /sdcard can get unmounted. So it couldn't find the .zip file I was choosing because /sdcard was not mounted. Why it was still possible to list the contents on the sdcard is a mystery to me. That must mean the recovery mounts /sdcard, lists the contents and then unmounts it again, and _then_ tries to start the update?!?
Anyway, going into the 'mounts and storage' menu and choosing 'mount /sdcard' suddenly made sure things worked again.
Really stumped how this happened.

dipje said:
It's disabled by default. It just says it can't read the .zip file. If I _enable_ verification it says it can't read the footer from the .zip. If I disable verification again it just says "can't open /sdcard/cm_bravo_full-163.zip (bad)".
I also have the same with build 162. I flashed pretty much every cm-nightly in the last few months and now all of a sudden this? What am I doing wrong .
I just installed the miui-desire.zip file again that was on my sdcard and it installed without a hitch. This is getting annoying .
Click to expand...
Click to collapse
What recovery image are you using? If you have amonRA you might try to fix this launching clockworkmod via fake flash and using that one to install the update. Otherwise if you already have clockwork you might try flashing amonRA via hboot and use that one...at times i can't perform something with one of the two recoveries, and using the other one often solves every issue for me

[NEW][Huawei IDEOS U8150][RECOVERY] UltraJack-Recovery v6.2.2 (06/03/2011)

Hi guys!!
NEW UltraJack-Recovery 6.2.2!!​Codename:Cappuccino​
NO MORE BLUE SCREEN!!!!​
Changelog:
FIX: Backup/restore of /cust partition (Bug present in all releases of Ultrajack -up 5.2.2 too- and Clockworkmod too!! )
Added:
mount and umount /cust partition
WIPE /cust
Amend support to CUST partition (Edify is supporting CUST alredy)
Amend/Edify are both supported! (the oldest and newest and future roms can be flashed )
New Base (RA_Recovery 2.2.2!)
FULL EXT4 support (read-write and formatting partition!)
Backup/restore menu (and scripts) updated
Backup/restore google apps
New menù colors
ADB Updated
Kernel sources Modded and compiled to solve an issue on toggle USB function
Download it now!! (6.2.2)(IMG only)
guide and zip file with fastboot binary and scripts here:
http://forum.xda-developers.com/showpost.php?p=11771509&postcount=39
If some1 liked my work and want donate me a beer (or a new micro-SD), there is the link link, or just say tnx
Thanks to:
Me, Myself and I!
Udk ( my best compiler-friend )
Maja (beta tester, and many great ideas! )
Amon_RA(this recovery was based on him RA_Recovery 2.2.1 sources, and many thx about compiling tips!)
JackTheVendicator (without his modded tools the boot.img and recovery wouldn't be possible)

Old versions:
Hi guys there was a problem on some devices with amonra 1.6.2 for the pulse mini.
The BSOD!!!! (windows like)
But now this issue has been SOLVED!!!!
NEW VERSION!!​
NO MORE BLUE SCREEN!!!!​
Download it now!! (4.6.2)
Changelog:
Fixed SD-MassStorage function
Fixed all Wipes!
Ext2/3/4 support
if some1 liked my work and want donate me a beer (or a new micro-SD), there is the link link
Thanks to:
Me, Myself and I!
Udk ( my best compiler-friend )
Maja (beta tester, and many great ideas! )
Amon_RA(this recovery was based on Amonra pulse mini v1.6.2, and many thx about compiling tips!)
JackTheVendicator (without his modded tools the boot.img and recovery wouldn't be possible)
UltraJack-Recovery_v2.6.1

you are f***ing great!!!

Now is the time for the dedicated section

NVM fastboot install. Nice.

I hope you don't mind but I linked this to the IDEOS group over at www.simply-android.com
THANKS!

What i should do with this .img file?

This recovery won't allow you to do a boot or system wipe. just data/cache and dalvik. If you do the wipes included you can still boot the phone afterwards...that's not a full wipe.
Just FYI.

nobreak1970 said:
This recovery won't allow you to do a boot or system wipe. just data/cache and dalvik. If you do the wipes included you can still boot the phone afterwards...that's not a full wipe.
Just FYI.
Click to expand...
Click to collapse
So are you saying this is just like Googles own recovery?
It wont actually allow you to wipe the phone like AmonRA does?
Then thats useless wouldn't you agree?

@ Ultrakiller
plz plz plzzz somebody teach me how to Flash a custom recovery like the one above for my Ideos U8150-B......
I've been all around the forums and internet ....but nothings working for me ..... im using Windows7 x86 Ult Ed .....
i've even tried 1.6.2-pulsemini-amonrarecovery Instructions for windows ......but still no luck !!!
i Even tried to Flash Image through Terminal .... but for some reason it said " Flash_image not found" .....even though the filename was accurate !!! ........
Kindly Kindly Kindly guide me through the process ..... im so frustrated now .... and im dying to try new ROMS on my Ideos .....
(Also wat ROM u think is better DjDroid's or Sudomod ??????)
Plz Help ASAP !!!!

How To: Flash UltraJack Recovery to your Phone (Windows/Mac/Linux)
How To: Flash UltraJack Recovery to your Phone (Windows/Mac/Linux)
NOTE: This is a modified version of the AmonRA recovery flashing package.
The only thing I really did was modify the .sh/.bat files and include the UltraJack Recovery.​
@devilzeye793 and whoever else may be wondering: Here you go!
1. Download the attached ZIP and extract
2. Make sure you have the necessary drivers installed for bootloader mode (installing PDAnet seems to do the trick on Windows: http://forum.xda-developers.com/showthread.php?p=9861928#post9861928)
3. Boot your phone into bootloader mode (Google it, I can't list all the ways here).
4. Plug your phone into your computer and let Windows install the drivers automatically (if you're on Windows, unfortunately I'm not really sure how this happens on Mac/Linux). NOTE: On some phones (i.e. the U8150), the phone will stay on the carrier logo screen. THIS IS NORMAL!
5. Run the installer for your OS from the extracted folder (.bat file on Windows, .sh file on Mac/Linux) and let it work its magic
6. After the script has flashed the recovery image (should take ~1-5 seconds), unplug your phone and remove/re-insert the battery to get out of bootloader mode
7. Enjoy your new recovery image!
Hope this helped some people out there!

stevenmirabito said:
How To: Flash UltraJack Recovery to your Phone (Windows/Mac/Linux)
NOTE: This is a modified version of the AmonRA recovery flashing package.
The only thing I really did was modify the .sh/.bat files and include the UltraJack Recovery.​
@devilzeye793 and whoever else may be wondering: Here you go!
1. Download the attached ZIP and extract
2. Make sure you have the necessary drivers installed for bootloader mode (installing PDAnet seems to do the trick on Windows: http://forum.xda-developers.com/showthread.php?p=9861928#post9861928)
3. Boot your phone into bootloader mode (Google it, I can't list all the ways here).
4. Plug your phone into your computer and let Windows install the drivers automatically (if you're on Windows, unfortunately I'm not really sure how this happens on Mac/Linux). NOTE: On some phones (i.e. the U8150), the phone will stay on the carrier logo screen. THIS IS NORMAL!
5. Run the installer for your OS from the extracted folder (.bat file on Windows, .sh file on Mac/Linux) and let it work its magic
6. After the script has flashed the recovery image (should take ~1-5 seconds), unplug your phone and remove/re-insert the battery to get out of bootloader mode
7. Enjoy your new recovery image!
Hope this helped some people out there!
Click to expand...
Click to collapse
well awesome man ....it worked this time .....u ppl are awesome !!!
GOD BLESS !!!
btw what Ideos ROM is Best in your opinion !! ????

Great, I'm glad it worked out for you!
I am currently using the stock ROM, simply because I currently see no reason to install any of the currently available custom ROMs for the Comet. As soon as someone has created a stable port of Cyanogen however, you better believe I'm going to be one of the first people on board!
Sent from my Comet using XDA App

fvckyougooglescammer said:
So are you saying this is just like Googles own recovery?
It wont actually allow you to wipe the phone like AmonRA does?
Then thats useless wouldn't you agree?
Click to expand...
Click to collapse
It has a Wipe option but it only wipes the caches it seems and not the boot and system areas.

stevenmirabito said:
Great, I'm glad it worked out for you!
I am currently using the stock ROM, simply because I currently see no reason to install any of the currently available custom ROMs for the Comet. As soon as someone has created a stable port of Cyanogen however, you better believe I'm going to be one of the first people on board!
Sent from my Comet using XDA App
Click to expand...
Click to collapse
+1
Sent from my Comet using XDA App

Nand + Ext backup doesn't work properly, an error messages with regards to :adb something .

New version done!
First post updated.

Well done!

stevenmirabito said:
How To: Flash UltraJack Recovery to your Phone (Windows/Mac/Linux)
NOTE: This is a modified version of the AmonRA recovery flashing package.
The only thing I really did was modify the .sh/.bat files and include the UltraJack Recovery.​
@devilzeye793 and whoever else may be wondering: Here you go!
1. Download the attached ZIP and extract
2. Make sure you have the necessary drivers installed for bootloader mode (installing PDAnet seems to do the trick on Windows: http://forum.xda-developers.com/showthread.php?p=9861928#post9861928)
3. Boot your phone into bootloader mode (Google it, I can't list all the ways here).
4. Plug your phone into your computer and let Windows install the drivers automatically (if you're on Windows, unfortunately I'm not really sure how this happens on Mac/Linux). NOTE: On some phones (i.e. the U8150), the phone will stay on the carrier logo screen. THIS IS NORMAL!
5. Run the installer for your OS from the extracted folder (.bat file on Windows, .sh file on Mac/Linux) and let it work its magic
6. After the script has flashed the recovery image (should take ~1-5 seconds), unplug your phone and remove/re-insert the battery to get out of bootloader mode
7. Enjoy your new recovery image!
Hope this helped some people out there!
Click to expand...
Click to collapse
Can this be uninstalled? I need to send mine back so I need to get the phone back to it's original state...

I'm not an expert, but you probably need to find an IMG of the original recovery image and flash it to the phone.
Anyone have it?
Sent from my Comet using XDA App

[KERNEL]Htc Pico/Explorer : OVERCLOCK kernel 2.6.38.6,ext2,3,4 support !!

Hi , I'm french well excuse my langage .
I am pleased to announce the porting kernel 2.6.38 .6 with ext2, ext3 and ext4 filesystem support and OVERCLOCK
I recreated the boot.img based on the European release version 1.17.406.2
I also change the recovery.img to include the kernel, allowing to make a backup of all the partion and sd-ext .
Still in testing (for overclocking) but 100% functional I will post the results within a few days.
BIG NEWS OVERCLOKED KERNEL NOW AVALABLE
REVERT BACK TO STOCK ROM
Info and download in post 4

Reserved
Changelog :
-Version 0.1(beta):
Kernel 2.6.38.6 with ext2,3,4 support , it allow you to move all your applications (data) on a ext partition on sd .
Add wifi module compiled with the kernel
-Version 0.2(beta):
Overclock kernel :
-Screen on : 320 -> 800 MHz
-Screen off : 122 -> 480
Perflock enable
The cpu is managed by the kernel , onderman is the default mode .
Kernel 2.6.38.6 with ext2,3,4 support , it allow you to move all your applications (data) on a ext partition on sd .
You msut have an ext partition on your sdcard
-Version 0.3(beta):
Perflock disable
The cpu can be manage by the user .
Overclock kernel : 122MHz -> 800MHz
Kernel 2.6.38.6 with ext2,3,4 support , it allow you to move all your applications (data) on a ext partition on sd .
You msut have an ext partition on your sdcard
Add all module compiled with the kernel
Update.zip avalable for CWM recovery , copy it to your sdcard reboot in recovery and intall it !
This is the last beta , all module are include , the final release will be more small and fast , thank you !
All work fine , no bug found .

Good work!!!

[KERNEL]Htc-Pico kernel 2.6.38.6 with ext2,3,4 support
PLEASE MAKE A FULL NANDROID BACKUP BEFORE I CAN'T ASSUME A BRICK
Well , I post here my work :
-clean-update.zip :
This is an official update , I just remove some command in the update.script because I cannot install it : I use a custom boot and recovery !!
Well , I modify the update.script and apply it : It work !!
Made some test : it patch some official apk and files , and upgrade boot + recovery + hboot +radio
You don't lose data , you have a new official rom : stock boot , recovery + new hboot +new radio
You lose custom boot , recovery and ext partition .
Your ext partition is on your sdcard but the stock kernel have no ext support
If you have unlocked your pico it's great you don't lose it and you can flash a custom boot or recovery
WARNIG : IF YOU USE AN EXT PARTITION YOU LOSE YOUR DATA BECAUSE YOU LOSE CUSTOM BOOT
MAKE A FULL BACKUP WITH NANDROID OR OTHER TITANIUM ...
IF YOU USE THIS UPDATE :
1) full backup with titanium or other and recovery mode -> nandroid backup
2) apply update
3) reboot the phone : it will reboot in 3 time
4) reboot in fastboot mode
5) Now we apply a fake flash to boot with over-recovery.img :
Code:
fastboot boot /full/path/to/over-recovery.img
The phone reboot in recovery
6) nandroid backup
Like this you have a stock rom with update
7) That's all
You can now flash boot system recovery , install rom , make what you want you can back to official rom (not system !!)
Revert back to stock rom with latest update :
-new boot.img with wifi modules
-new recovery
-new radio.img
-new hboot.img , always unlocked
-patch system update
Find it here
With this package you have a full clean rom
- zImage.7z :
The last kernel compiled on the source code by Htc-dev (2.6.38.6)and mod by me :
-Ext2,3,4 filesystem support , if your sdcard have an ext* partition , you cane move your data partion on it , like this you can install more applications .
You can use app2sd,link2sd ,etc,...
-Overclocked kernel , you can now manage your gouvernor , the cpu is boosted : 600MHz -> 800MHz .
- modules.7z :
All modules compiled with the last kernel .
- overboot.7z :
The last boot.img overclocked and ext support .
You can test it with :
Code:
fastboot boot /full/path/to/overboot.img
You can install it with:
Code:
fastboot flash boot /full/path/to/overboot.img
If you install it you must add all module or only bcm4330.ko and kineto_gan.ko in the /system/lib/modules directory
- over-recovery.7z :
The chinesse clockword recovery , mod by me with my kernel you can now more quickly make your backup and make a full nandroid backup with ext partition support !
You can test it with :
Code:
fastboot boot /full/path/to/over-recovery.img
You can install it with:
Code:
fastboot flash recovery /full/path/to/over-recovery.img
For a full nandroid backup you must install it
- install-over-boot.zip :
The all in one package , copy it on sdcard , reboot in recovery and install the boot.img with all the module , that's all

Youtube link
http://www.youtube.com/watch?v=paYDxatNKk8

Not able to download the files from the link. the files dont open (it says currrupted)
can you please please please upload it somewher else.pls

Hi jitin02
It's strange I have no problem ?!
I must find a repository for my files , I have a account on github but it's not a solution to share file .
I m sorry but I cannot direct link
I re-upload it now and give you some new link

Yannou90 said:
Hi jitin02
It's strange I have no problem ?!
I must find a repository for my files , I have a account on github but it's not a solution to share file .
I m sorry but I cannot direct link
I re-upload it now and give you some new link
Click to expand...
Click to collapse
I can give u my 4shared.com
loginid and password. you can upload there???

Thanks but I activate a ftp account to free.fr , when this is done I'll post the link to it.
But my link work well , I try it again and all is good , I'm on ubuntu lucid , maybe your antivirus don't like *.7z or install it but my archives don't be corrupted !
Thanks for your proposition but I must manage my work the most easly possible for me , I've made a lot of zImage and more (bash scripts , tools , and binaries ...) and share it with some friend
Really thanks , are you tried to re-download my archive ?
Here the md5sum :
b83128032241eaebd62cb2d33bc17fba BootExt-RecoveryExt.7z
41c7ea4bfd96505f66bc3b008d9265ff zImage.7z
Tell me your please
Thanks

AAAAAAAAAAAAA I bypass the limitation , I can now post direct link , great !!!!
You can test it now
Great !

Ahh, Thanks downloaded successfully.
Now trying your instructions in the first post to flash.....................
Another proposal, as i have my main device as Dell Streak5, so htc explorer is not much important to me even if it bricks. so here is propose is , If beta tester needed i can be the first one u can remember
I will post back as i successfully flash

Please TRY THIS BEFORE FLASH IT !!
fastboot boot /full.path/to/boot.img
or
fastboot boot /full.path/to/recovery.img
I don't want someone tell me it brick the pico , it's not the goal
I love gnu/linux , I love to dev a lot of application , I love to help everyone I can , I'm a "cool" man
Don't tell me you want to destroy your phone just to test , it's not something to do
Try it and tell me
I've made my own rom too , some update.zip to flash boot + recovery and install app2sd
I must have some fellback to know if I can post all my work .
Well be patient

Yannou90 said:
Please TRY THIS BEFORE FLASH IT !!
fastboot boot /full.path/to/boot.img
or
fastboot boot /full.path/to/recovery.img
I don't want someone tell me it brick the pico , it's not the goal
I love gnu/linux , I love to dev a lot of application , I love to help everyone I can , I'm a "cool" man
Don't tell me you want to destroy your phone just to test , it's not something to do
Try it and tell me
I've made my own rom too , some update.zip to flash boot + recovery and install app2sd
I must have some fellback to know if I can post all my work .
Well be patient
Click to expand...
Click to collapse
Tryd flashing before u posted this (sorry to me). with the help of this guide http://forum.xda-developers.com/showthread.php?t=735660
and below is the error i am getting to flash zImage
HTML:
HT1A1VN09469 fastboot
C:\android-sdk-windows\tools>fastboot boot zImage
creating boot image...
creating boot image - 2897920 bytes
downloading 'boot.img'...
OKAY [ 0.717s]
booting...
FAILED (remote: reproduce boot image with on-flash ramdisk error)
finished. total time: 0.735s
C:\android-sdk-windows\tools>

You don't do what I tell to you :
Your command rebuilt the boot.img with the zImage :
C:\android-sdk-windows\tools>fastboot boot zImage creating boot image... creating boot image - 2897920 bytes downloading 'boot.img'... OKAY [ 0.717s] booting... FAILED (remote: reproduce boot image with on-flash ramdisk error) finished. total time: 0.735s
It's not the good way , you must test the boot.img , and not recreate it :
fastboot boot /full/path/to/boot.img
To do what you try the zImage and the boot.img use by the pico must have be build in the same way

are these all commands i have to run/flash. or is there any other i have to do.
-boot.img :
adb reboot bootloader
fastboot boot /full/path/to/boot.img
fastboot flash boot /full/path/to/boot.img
adb shell mv /system/lib/modules/bcm4330.ko /system/lib/modules/bcm4330.bak
adb push /full/path/to/bcm4330.ko /system/lib/modules/bcm4330.ko
-recovery.img :
adb reboot bootloader
fastboot boot /full/path/to/recovery.img
fastboot flash recovery recovery.img
adb reboot bootloader
fastboot flash boot boot.img
but i didnt understand what i should do with zImage??

In a word : NOTHING
To use zImage you must dump boot.img or/and recovery.img , extract it , remove the old zImage and rebuild the boot.img/recovery.img .
When this is done you try it with :
fastboot boot /full/path/to/boot.img
or
fastboot boot /full/path/to/recovery.img
And if you like this you can flash :
fastboot flash boot /full/path/to/boot.img
or
fastboot flash recovery /full/path/to/recovery.img
If you do what you says you have my kernel :
kernel version :
2.6.38.6 [email protected]

To just try my kernel on boot :
fastboot boot /full/path/to/boot.img
To just try my kernel on recovery :
fastboot boot /full/path/to/recovery.img

Thanks sir for so much help.
Heres what i did
flashed recovery in ur 3rd post
flashed boot.img in 3rd post
push ***.ko file in post.
so i guess now i have ur's evrything (completed job?)
yes i checked my device "about"
i have ur kernel . same as ur pictures .
when u will be releasing ur custom rom??
---------- Post added at 08:29 PM ---------- Previous post was at 08:22 PM ----------
After every flashing, i.e. getting ur kernel on board. when i try to mount ext3 partition in link 2 sd . it looks like it will take years to mount.
stuck on please wait Ok figured out , ext3/4 partitions nt able to mount.

i already have an a fat32 partition and moved apps using links to sd...(so i dont need the custom kernel as of now) i came across this post looking for overclocking ready kernels.. so let us know when u manage to successfully overclock the device.. and post screenshots of ur custom rom if possible..

deepaktom said:
i already have an a fat32 partition and moved apps using links to sd...(so i dont need the custom kernel as of now) i came across this post looking for overclocking ready kernels.. so let us know when u manage to successfully overclock the device.. and post screenshots of ur custom rom if possible..
Click to expand...
Click to collapse
First of overclocking this small device like whose max freq. Is 600 . Where u want to take it 1000. ? Ur dEvice will be fired,
Sent from my Dell Streak using XDA App

Clean Cricket Htc One SV Nandroid (2.04.1050.3)

idk if anyone would want this but here is a clean jellybean nandroid backup of a cricket wireless Htc One SV with newest update already applied. http://www.filefactory.com/file/5u395y1qavzr/Clean_JB_Crkt_2.04.1050.3.rar

Ok, i've downloaded this backup and made a zip file for flashing in recovery from it.
Credits:
- ironhide602 for the backup
- dsixda for his kitchen
Download:
JB_Crkt 2.04.1050.3_stock_odexed.zip
Notice:
As i don't have a cricket phone i could not test but one tester reported it's working.
Anyway, flash this on your own risk. Don't do this, if you are not experienced enough!
This files are for flashing in recovery.
I will not work on bugs, if you find some (as i could not test myself)!
Kernel source code can be found at htcdev.com.
How to install:
First of all: make a nand backup in recovery, so you can easily go back if you don't like it!!!
Download the zip file that match to your device and copy to sd card.
Wipe/format data/system/cache/dalvik cache, factory reset.
Flash the zip through recovery.
Htcdev.com unlocked users who are not S-Off have to extract boot.img from the zip file and flash it afterwards over fastboot with the command:
Code:
fastboot flash boot boot.img
Then reboot.
- There is no superuser/su inside, if you wanna root, flash superuser from here.

old.splatterhand said:
Ok, i've downloaded this backup and made a zip file for flashing in recovery from it.
Credits:
- ironhide602 for the backup
- dsixda for his kitchen
Download:
JB_Crkt 2.04.1050.3_stock_odexed.zip
Notice:
As i don't have a cricket phone i could not test but one tester reported it's working.
Anyway, flash this on your own risk. Don't do this, if you are not experienced enough!
This files are for flashing in recovery.
I will not work on bugs, if you find some (as i could not test myself)!
Kernel source code can be found at htcdev.com.
How to install:
First of all: make a nand backup in recovery, so you can easily go back if you don't like it!!!
Download the zip file that match to your device and copy to sd card.
Wipe/format data/system/cache/dalvik cache, factory reset.
Flash the zip through recovery.
Htcdev.com unlocked users who are not S-Off have to extract boot.img from the zip file and flash it afterwards over fastboot with the command:
Code:
fastboot flash boot boot.img
Then reboot.
- There is no superuser/su inside, if you wanna root, flash superuser from here.
Click to expand...
Click to collapse
Hellow , Please can u Upload this file in other server ill try multiple times
& stuck in the final byte .
Regards

I have no fast internet and i'm trying since days to upload a big file, so not before the other one is finished.

old.splatterhand said:
I have no fast internet and i'm trying since days to upload a big file, so not before the other one is finished.
Click to expand...
Click to collapse
sorry sorry ... not server ,,its my own pc,, ill try in other & everythin ok
thanks
Regards

Redmi 9A MeYou Rom Rooted

Need unlocked bootloader
Download Rom https://gofile.io/d/44WiXf
Don't use recovery and boot img which is inside the Rom file. Here you have the updates with the corrections
Update recovery.img : https://gofile.io/d/UWjWjR
Update boot.img : https://gofile.io/d/z1ExYV
Vbmeta : https://gofile.io/d/4aIWrv
Root only mode :
If you just want root
flash only vbmeta and boot.img with fastboot
fastboot flash vbmeta vbmeta.img
fastboot flash boot boot.img
Full debloated and uncrypted rom with recovery mode :
Unzip vendor system product image file on your phone
Recovery.img boot.img vbmeta.img near your fastboot programm
Flash recovery.img boot.img and vbmeta with fastboot :
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta.img
fastboot flash vbmeta_vendor vbmeta.img
Boot on recoverymod
Install like an image
Give attention system for system vendor for vendor....
Format your data if you never installed modem rom,or just wipe if you allready got uncrypted mod
reboot
Don't try intsall magisksu new version it doesnt work, you can only install new manager
Don't forget in developer menu disable usb debuging if you don't need it
if things are missing, I will add as I go
The version for those the touchscreen does not work will come later.
If you want donate you can for my daughter

I'm sorry but there's no edit button, then i add what i forget here.
Last one thing mount cust partition under mount menu then you can enter this command under terminal recovery :
cd /cust
rm -r *

Also if you allready formated before with new vendor, you don't need format it again, just wipe crappy new forum

Don't forget you only need install MagiskManager then he ask you reboot once time
Archive.zip (MagiskManager, Youtube Vance, and...)
Gofile - Free Unlimited File Sharing and Storage
Gofile is a free, secure file sharing and storage platform. With unlimited bandwidth and storage, you can easily store and share files of any type without any limits. Our advanced features, such as CDN support and password protection, make Gofile the ideal choice for individuals and businesses...
gofile.io

Mistake rocevry.img sorry
This is the one good : https://gofile.io/d/UWjWjR

Need to flash vbmeta as well?

ahsan.ey.ca said:
Need to flash vbmeta as well?
Click to expand...
Click to collapse
You need reflash vbmeta and same vbmeta for vbmeta_system if you reinstalled full Miui rom

Recovery flashed, working fine. It stays too. Waiting for rom to download, doing it first time like this so please accommodate silly questions if any

I do my best, recovery it is very good now also you can flash super.img
If you allready formated Data whit last vendor.img for uncpryted mode, you don't need to format it again, just wipe it is oj

gsi flashing works?

I'll need help with these. My queries in brackets ( )
-Give attention system for system vendor for vendor.... (Please explain a bit)
-Format your data, do not wipe format (A bit more explanation)
-Last one thing mount cust partition under mount menu then you can enter this command under terminal recovery :
cd /cust
rm -r *
(Do I have to do this inside recovey menu?)
-Also if you allready formated before with new vendor, you don't need format it again, just wipe crappy new forum (Not formatted before)
Don't forget you only need install MagiskManager then he ask you reboot once time
Archive.zip (MagiskManager, Youtube Vance, and...) (Do i have to install magisk via zip in recovery? If so, which file? As u said latest wont work)

For me recovery no touch.Send me anethyng to test.

This is not gsi mode, it's Miui boot.img recovery.img and full rom hacked.
4 file in your phone
System.img Vendor.img Product.img and Boot.img
Recovery Menu :
Install > Install Image >> vendor.img >> Vendor Image Swipe
Same for all 4 image
Then format your data if you are on crypted Miui rom or just wipe if you got allready uncrypted data mode
Finaly Mount Menu
Check Cust to mount
Then back to Advanced menu choose Terminal :
cd /cust
rm -r *
Reboot and wait
Archive.zip it is for you make easyer to got what you need : just unzip it on your phone after reboot finish and install what you need

No don't install Magisk.zip as i say can't work, you don't need magisk.zip anymore, just install Magisk Manager under Anrdoid in the Archive.zip

vendor.img >> Vendor Image >> Swipe
system.img >> System Image >> Swipe
product.img >> Product Image >> Swipe
boot.img >> Boot >> Swipe

Then format your data if you are on crypted Miui rom or just wipe if you got allready uncrypted data mode
I'm not sur about this, I flashed Treble Rom when u shared and after that I did not change anything. So do I format now or just wipe?

Last time i share vendor uncrypted mode if you got this vendor mod then you allready formated it to got uncrypted data if not then format your data.

Format your data, do not wipe format
I've flashed vendor, system, product and boot. Now I'm on main menu. Where do I format from? Wipe I guess?

By clicking wipe, I have 2 options:
1. Advanced Wipe
2. Format Data
And then on bottom is "Swipe to factory reset"
What do i do?

"yes" >> swipe