Hi!
i connected my phone to my car speakers via a mini-usb to 3.5mm adapter and i was wondering if i could use the microphone of the phone because this registers it as a headset and is expecting a mic from it.
it would be great to take phone calls through the external speakers.
never heard of it being possible
but then also didn't believe it was possible
to use the normal speaker when a headset
was connected but thats possible on some
phones where the headset is antenna for the fm radio
I use the factory HTC Fuze 3.5mm audio jack dongle that came with the phone, and I am able to use the phone's mic by default while audio-out is interfaced with my car stereo. The audio comes through the car speakers. I have been told by the caller on the other end that it sounds no different than me using a bluetooth headset.
Related
I'm on my second Audio adapter from Pocket PC Techs: http://www.pocketpctechs.com/detail.asp?Product_ID=PPCPADPT01. The first one would sometimes only play the left or right speaker and I'd have to jiggle the wire on the adapter for it to play properly. I returned this for a second one which worked fine up until last week when it started to pop the speakers in the car when the slightest jostling of the wire occured (hitting bumps). I've got it connected to the XDA 2 and then to a cassette adapter with 3.5mm jack in the car. The cassette adapter works fine on the iPAQ H3970 and the XDA 2 works perfectly with the included stereo headset. Another problem with the PPCTechs audio adapter is that the microphone doesn't work in the 2.5mm headset jack part.
I know there are people out there who have canibalized their included stereo headsets to make audio adapters and also people who have made their own USB adapters with audio out capabilities. Is anyone interested in making one for me?! I can send a canibalize-able stereo headset with the proper audio jack if needed.
I would like either:
- A modified stereo headset cable with microphone that connects to a female 3.5mm stereo headset jack.. or directly to a car cassette adapter.
...or...
- A serial port connection that can output stereo audio to a 3.5mm female audio jack, includes a microphone or 2.5mm mono headset jack, and provides charging capabilities.
I imagine the former choice would be easier, but none of my local electronics repair shops want to do it and I don't have the tools or experience to do it right. The latter would be nicer. I'd buy a car kit, but I havn't seen any that work with the XDA2 and provide audio out that can connect to the car stereo. I want both stereo music/movies to be played in the car stereo speakers as well as GPS navigation commands and (sometimes) phone calls... and I want Voice Command to work (hence the need for a microphone)!
Please PM me with costs if some one can do this for me.
Adamz- Did you push in the connector from the Audio all the way in? I used the handsfree set ( supplier with MMDA II) and it was not working properly and was also loose until I found that you have to really push it firmly.
I am suprised if you did do that and it still does not work as you said it has all the connectors
I am also looking for a similar solution using the same principle. The other sync input I use for mt GPS connector/ charger . was going to try the Audio adaptor that you are using with a mute box through to a speaker .
Can any one help?
Adamz:-
Did you read this topic?
Maybe this might work for us.
http://forum.xda-developers.com/viewtopic.php?t=5061
http://www.mobiles.co.uk/images/accs/safetalk.jpg44
:lol:
Nah, I want stereo quality music to be played in the existing speakers in my car. I also want GPS navigator instructions to be played in the car stereo as well as phone calls. I've got a Bluetooth GPS reciever, so I don't really need a serial connection.
The PPCTechs adapter is fully inserted into the audio jack, although sometimes pushing it too far makes it stop working as well! But if I jiggle the wire, sometimes it does work... then if I hit a bump, maybe it will stop working.
I'm thinking the USB Cradle with Audio might be good. If that's got a 3.5mm female stereo jack in the back, I can plug the casette adapter into that. Plug the USB into a cigarette lighter adapter... and that should be all set sinc the Audio USB cradle supposedly has a microphone in it.
Those don't seem to be available yet though.
Found this on the net
http://www.boostaroo.com/products.html
If you plug in a headset in the PDA, the microphone underneath the PDA is automaticly turned off (because it assumes you have a microphone on the headset).
Is it possible to prevent this?
If i use my own head-phones without mic, i have to unplug it if the phone rings, else i can talk!
Does anyone know?
GeeZuZz,
I use an fm radio cigarette adapter to play my music through my car stereo and when my phone rings I only have to answer it and my mike does not cut out, the caller can hear me fine and I hear them through the car speakers so I know this doesnt totally answer your question but using the headphone out on mine does not cut out the mike.
GeeZuZz,
I use an fm radio cigarette adapter to play my music through my car stereo and when my phone rings I only have to answer it and my mike does not cut out, the caller can hear me fine and I hear them through the car speakers so I know this doesnt totally answer your question but using the headphone out on mine does not cut out the mike.
Hmm... if i answere the phone with the headset plugged in, they can't hear me. But if i disconnect it, and put it slowly in, they can hear me... in other words, theres a software restriction.
Any way to override this? I'll probably never use a headset anyway (the bundled one was crap).
GeeZuZz,
It is a hardware issue. If you look at your headset's plug, you will notice that it is divided into 4 bands.
1. earth(common)
2. Right earpiece
3. left earpiece
4. mic
When inserted into the socket, the bands actually physically cut signals to the speakers and mic in the device (more like a switch).
Because your headphones stll have the same 3.5mm shape, it will also cut signal to the devices on your pda and transfers the signals to your headphones that has only 3 bands (none for mic obviously).
from my experience, i think its up to the jack that you plugged in to the device, if the jack is a stereo (has 3 black rings), the device will think that a mic is present, thus automatically disabling it. but if the jack is mono (2 ring) the mic will still be enable.
Three black rings(4 bands) mean stereo phones + mono mic. Two Black rings( 3 bands) mean stereo phones only.
Hmm... are there any way i can modify the jack, so that it will not disconnect the mic? Like putting some plastic on the piece of the jack where the mic is supposed to make the connection?
Hello!
When I plug my Touch Pro into an active Adapt carholder the sound output of my touch is forced to the charger (no sound output anymore on my mobile).
Is there any way around this? Any registry setting?
Or maybe remove some of the pins from the mini-usb connector on the charger?
Try getting HTC's official dongle which plugs into the USB port and gives you several connectors;
USB for charging
3.5mm headphone socket
2.5mm mini-headphone socket
USB for HTC's original supplied headphones
If you use this, you can plug in headphones at the same time as charging. I use it to route sound through to my car stereo so I can use the phone as an MP3 player and Sat-Nav.
If you don't use the headphone sockets, sound still comes out through the main speaker on the phone.
Hmm I have one of those, but the car charger I use is a slide-in holder, so there won't be much room for the dongle
Microphone unuseable when plugged into stereo
I use the usb dongle adaptor in my car to push sound through the stereo, however this disables the HTC Touch Pro microphone so although I can hear people calling in (through the car speakers) they cannot hear me.
I think it is because the phone thinks the headphones are plugged in and that I'd use the headphone microphone.
Does anyone have a tweak which would allow the phones microphone to remain in action when using the dongle?
Many thanks
rjbarrington said:
I use the usb dongle adaptor in my car to push sound through the stereo, however this disables the HTC Touch Pro microphone so although I can hear people calling in (through the car speakers) they cannot hear me.
I think it is because the phone thinks the headphones are plugged in and that I'd use the headphone microphone.
Does anyone have a tweak which would allow the phones microphone to remain in action when using the dongle?
Many thanks
Click to expand...
Click to collapse
+1 to that... i would like to know a fix for that
I have a Brodit holder for my car (http://www.brodit.com/images/234542.pdf)
And i have the same problem, is ther any solution for this?
rjbarrington said:
I use the usb dongle adaptor in my car to push sound through the stereo, however this disables the HTC Touch Pro microphone so although I can hear people calling in (through the car speakers) they cannot hear me.
Click to expand...
Click to collapse
I don't have that problem at all, my phone's microphone works fine while using the USB dongle with a 3.5mm jack plugged into it, connected to my car stereo.
Are you using HTC's official dongle, the one with the 3.5mm, 2.5mm USB power and USB headphone sockets?
It works fine for me!
Hi, I recently purchased a converter for my diamond, it's a USB to 3.5mm Headphone jack which I then convert to RCA and use it as in Auxilary in my car and listen to songs through my car speakers. As soon as I start calling I hear the person I am calling through the car speakers but they cannot hear me since the Diamond thinks it is a wired headset hooked up with a microphone. So I wanted to know if it is possible to enable the Phone microphone while hooked up to the headset?
Buy the YC A300 adapter
Buy the Diamond YC A300 accessory. It works. When you plug it in, it mutes nothing. The audio comes from the Diamond speaker and the mic is operational. As soon as you attach your earphones it mutes the built-in speaker, but not the mic. So, it only mutes what is necessary. Just what you need.
the diamond, at least the cdma sprint touch diamond, has a built-in microphone in the same space as the earpiece. i use it all the time when i make calls using my 3.5mm earbuds
Is there a application around which will un-mute the mic though, im guessing its only software mute, not a hardware mute on it.
Maybe it is software but I haven't seen any app that solved this issue
The headphone jack on the G Tablet works with a typical headphone or speakers, as long as you connect it with the right plug.
If you connect a headset with a microphone, to this jack - will that work too?
Will the audio out come into the headset?
Will the audio in go in via the headset microphone?
employee said:
If you connect a headset with a microphone, to this jack - will that work too?
Click to expand...
Click to collapse
Wondering the same thing myself but have nothing to test it with.
Nope. I tested with my hands free set in my car and no go. I put my hand over the mic (which is way sensitive BTW) and could only record from internal mic.
Headset/mic combos with one plug are meant for phones. Their input jacks are wired to spk and mic channels.
Headset/mic combos with two plugs are for computers and each plug must go in the right input on the PC.
The GTablet is much more computer than phone, although many of us are using sip apps to MAKE it a phone too.
Our headphone jack is just that, a headphone jack.