I had the X7501 analyzed ages ago by a company that specializes in USB development, and it seemed it had a hardware problem with powered devices that prevented it from working with my USB drivers. Does anyone know if this been fixed with with the X7510? If anyone has a X7510, the USB host cable, and a Canon or Nikon DSLR, and would be interested in seeing if my driver works, please let me know.
Related
Hi, what can i plug on the USB 1.1 connector? Hard drive, card reader, printer,...?
Thank you very much.
You can only use whatever the OS and the hardware supports.
So, a USB pen drive will work fine, as will a hard drive with its own power supply. USB powered hard drives won't work as they draw more current than the device can supply.
You can also connect USB keyboards and mice- even wireless ones work OK.
Printers probably won't work as the OS simply doesn't have the drivers installed, though a printer may work in basic emulation mode (Epson, Deskjet etc).
Cameras may connect OK- depends on the camera. My Nikon connects as it reports itself as an external drive, but my Lumix doesn't, as it needs a special driver.
Thank you very much.
Does anyone know if drivers can be added to the WM6.1 ROM for specific devices? e.g. webcams, digital cameras and digital video cameras?
Thanks.
In general the answer is no
Most developers wouldn't see the expense involved as worthwhile considering the extremely limited market. There are only a handful of WinMo devices that have USB Host capability, and of those, most users would probably not bother with anything more than USB Disk Drives.
I think most digital still cameras would be able to connect as disk drives, but video cameras would probably need a device with a much faster I/O subsystem to be able to accept the video stream.
...and I thought I could get all 'James Bond' by adding a mini web-cam to look under doors and round corners...oh well, back to using a mirror on a stick then.
thintin said:
...oh well, back to using a mirror on a stick then.
Click to expand...
Click to collapse
Probably cheaper and more reliable
Not if it's anything like my last mirror, it was made by microsoft, it kept saying it wasn't compatible with the stick and then going blue!
Hello,
I have found that most bluetooth stuff works ok as well. Bluetooth mouse, keyboards,ect. I bought a great bluetooth mini keyboard with built in mouse pad like on a laptop and its first rate. I plug my athena into the telly, crash on the sofa with a beer and the keyboard. Much better than a laptop
a good rule of thumb is if it needs drivers installing it wont work on the athena. there is a thread somewhere on the Athena site listing everything that people have got to work, well worth a look.
regards
jay
That would be a good list to have. Can you tell me which Athena site it was on please? Also, which BT keyboard are you using?
Thanks, Phil.
thintin said:
That would be a good list to have. Can you tell me which Athena site it was on please? Also, which BT keyboard are you using?
Thanks, Phil.
Click to expand...
Click to collapse
The keyboard is an keysonic ACK340BT, got it off ebay, and I cant remember what part the thread was, but try Athena accessories. Try searching peripherals or something like that.
Jay
Just wondering if this is possible, and if so, which phones and OS's will support this. More specifically, will the Samsung Nexus S be able to browse filles off of my WD USB3.0 My Passport Essential SE 1TB?
i have seen something done in this regard where that guy used a "fake" microSD to act as one end of a USB cable. the other end was a regular usb port where he hooked a usb thumb drive. you might try to find it and see if it applies on your case.
only o2 flame can do usb otg
but slow in transfer rate as usb 1.1
I have a similar question.Can i somehow send pictures from a USB device to my iPhone? I really need to get those pictures on my phone. Is there a way other than using my pc?
If anyone is having trouble getting the XOOM to connect to their Windows PC, I just discovered that the problem is underpowered USB ports.
The software you need is here:
http://www.motorola.com/Support/US-...tware_and_Drivers/USB-and-PC-Charging-Drivers
After hours of messing around, I disconnected my XOOM from the front panel USB port and connected it to one of th USB 3.0 ports that my case has a passthrough to the front.
The solution isn't necessarily that USB 3.0 port solved it, but it does work fine in the 3.0 port. I think the solution is more the fact that the port is passthrough and really it's actually a higher powered case-rear port.
Hope this helps someone who might be getting frustrated as I did.
Just for the sake of completeness I'm running Windows 7 Professional x64.
http://support.google.com/ics/nexus/bin/answer.py?hl=en&answer=2386439&topic=2375623&ctx=topic
According to the official Google Help Page, it should support USB Host. However searching online have returned a lot of out-dated threads about how the USB chip works when it was still running Gingerbread.
I have purchased a USB adapter, tried to connect any USB device to my Nexus S, and nothing happens. The USB port will not be powered. However quoting Google's official help text :
You may need an adapter to connect the keyboard or other device to your phone's USB port. To connect more than one USB device at a time, use a powered USB hub to reduce the drain on your phone’s battery.
This implies that connecting devices to your Nexus S will drain your battery?
I am very confused. I have no powered USB hubs so I cannot try to see if the USB host function is purely limited by the lack of power or the USB chip.
I am sure I am not the only person who would love this to work. Is there anyone who knows what does it take to get USB Host to work on Nexus S upgraded to ICS? (Despite Google's help site indicating that it should just works out of the box)
Thanks a lot.
So, I spent some money and bought a powered USB hub.
No it didn't work.
I think the reason is that the power is not being transferred UPSTREAM. For example, I have connected the USB hub to my Nexus S, and a Logitech wireless mouse receiver to the powered USB hub.
Although I am sure that the Logitech wireless mouse receiver has power (from the USB hub), the Nexus S does not recognize the existence of the USB hub, since the power is not transmitted from the USB hub back INTO the Nexus S.
Feeling disappointed, I repacked everything nicely and exchanged my purchase for a slightly more useful 16GB SD Card.
Does anyone has any information to how is this supposed to work?
Or should we assume Google has made a stupid typo in their help articles, and that the Nexus S will not actually work in USB Host Mode ??
anyone please?
I too am looking for answers. Anyone?
Sent from my Nexus S using Tapatalk
Hi All,
I'm trying to get a USB device connected to my phone (specifically an OBDII reader with Torque Pro). No matter what I do, I can't get it to recognize on my Nexus S 4g. When I run USB Host Diagnostics, it basically says it can't find anything.
I'm running a flavor of Cyanogen 10 with its stock kernal.
My questions are:
Do I need to go through a powered USB hub to get the proper power?
Do I need a specific kernel with the correct host modules enabled? (if so, can someone point me to one)
Thanks,
Torque Pro worked fine with my NS4G with a cheap ebay bluetooth adapter with no hassle. That adapter had no batteries at all, it was powered through the ALDL port on the car. I couldn't imagine needing power since no scanner I know of needs power at the ALDL port, it pulls it from the port itself. I would bet it is USB driver problems, or problems reading the USB adapter through Jellybean because of this new MTP protocol that sucks
Good to know.
Should I try a HoneyComb ROM? I guess it COULD be the OTG cable I got from amazon. Maybe it's not plugging in all the way.
thx
DizturbedOne said:
Torque Pro worked fine with my NS4G with a cheap ebay bluetooth adapter with no hassle. That adapter had no batteries at all, it was powered through the ALDL port on the car. I couldn't imagine needing power since no scanner I know of needs power at the ALDL port, it pulls it from the port itself. I would bet it is USB driver problems, or problems reading the USB adapter through Jellybean because of this new MTP protocol that sucks
Click to expand...
Click to collapse
shelbydz said:
Good to know.
Should I try a HoneyComb ROM? I guess it COULD be the OTG cable I got from amazon. Maybe it's not plugging in all the way.
thx
Click to expand...
Click to collapse
No Honeycomb roms for Nexus S...
I highly suggest a OBDII bluetooth adapter. They're 15$ on the net and will spare you the trouble. Make sure you find one that has good reviews, some cheap ones have problem connecting to some cars because of broken J1850 PWM (i think it's PWM, might be VPW) protocol.