Ive tried searchig for a solution maybe i just over looked it but while i was trying to change my splash image i notcied i couldnt fastboot cus i was running the stock g1 bootloader. i just recently rooted my phone with jf adp1.5. anyways i tried flashing with the new bootloader it said it was a succesfrul flash, but i was still stuck with the original bootloader. Can anyone please help me with this issue? thanks
Related
Hi, I tried updating my rom using faria-htc wizard...WWE WM6 ROM and after it was complete, it said there was some error during the setup. So after doing the other steps to start the install over again, now it's telling me that I have a old updater version, and now my phone is stuck on the boot loader screen and I have no idea what to do?
If someone can please help me install the oem version or get the WM6 version that would be great!
Thanks
http://forum.xda-developers.com/showthread.php?t=298613
ok I went and downloaded the Wizard love rom but it still will not work. I can't read it but Im sure it said that it could not connect, because I am stuck in boot loader mode.
Any other advice please?
I've tried a few other roms also and all of them do the same thing
dpgmeister said:
ok I went and downloaded the Wizard love rom but it still will not work. I can't read it but Im sure it said that it could not connect, because I am stuck in boot loader mode.
Any other advice please?
I've tried a few other roms also and all of them do the same thing
Click to expand...
Click to collapse
Do you have a G3 or G4 Wizard? What is your IPL / SPL currently? If you are on the Bootloader screen (rainbow screen) then all you have to do is hook up your USB cable and flash your carrier's official rom. Activesync will NOT connect to bootloader, but it will work.
I have a G3. My IPL and SPL are both 2.25. Where can I download Cingulars ROM file from? I tried finding it but having no luck.
Thanks
Cool thanks man, I got it working again. The download section at the HTC website was finally back up
I am a little confused. I have been trying to get WM6 on my T-mobile Wizard and actually got TNT 1.1 loaded and was working fine. I found that I could no longer view my contacts. The page would appear and then as quickly as it appeared it disappeared.
So I figured, I at least got it this far. I will just reload this rom and see if perhaps something did load right. Well after the reload. The phone boots up to the splash screen with IPL\SPL numbers and just sits. NOTHING.
I left it there for like 2 hours and still nothing. But I can still get into the BootLoader.
My questions to you gurus is:
Is the phone fubared?
Can I do some kind of master reset?
Why would it tell me "Invalid Vendor ID" when trying to flash the orginal T-mobile rom?
Are there any tools that can help me out? Paid\free?
Please help!!! Seriously! Please HELP!!!
Very much appreciated.
Thanks
Drunknasty said:
I am a little confused. I have been trying to get WM6 on my T-mobile Wizard and actually got TNT 1.1 loaded and was working fine. I found that I could no longer view my contacts. The page would appear and then as quickly as it appeared it disappeared.
So I figured, I at least got it this far. I will just reload this rom and see if perhaps something did load right. Well after the reload. The phone boots up to the splash screen with IPL\SPL numbers and just sits. NOTHING.
I left it there for like 2 hours and still nothing. But I can still get into the BootLoader.
My questions to you gurus is:
Is the phone fubared?
Can I do some kind of master reset?
Why would it tell me "Invalid Vendor ID" when trying to flash the orginal T-mobile rom?
Are there any tools that can help me out? Paid\free?
Please help!!! Seriously! Please HELP!!!
Very much appreciated.
Thanks
Click to expand...
Click to collapse
if your device is G3, unlocking is required to flash any rom, before upgrade your device, it is recommended to flash an official WM5.0 rom (in your case T-Mobile rom) with IPL and SPL 2.xx then flash again.
in general there are many probabilities for your issue.
((Where is TNT1.1?? did you mean 1.0?? ))
My Bad meant 1.0
So to get it straight.... I will need to unlock my phone each time?
Oh and to correct myself again, when flashing with the T-mobile ROM it says UPGRADE ONLY. And the read me file says its the wrong RUU. But it is the same file from Tmobile I used when I first got the phone. But I will try again.
Are there any other suggestions?
You need to read the "how to flash" sticky.
I did. I am not any expert or anything but I believe the phone is unlocked already since I once had WM6 on my phone. The real issue I am having is that it wont boot past the splash screen after flashing.
And that is true when re following the steps in guide. After flashing to the button rom it will not boot past the splash screen.
Try another ROM.
Sounds like you need the "Wizard Love" rom. I dont have the link handy but I am sure someone else does.
Drunknasty said:
I did. I am not any expert or anything but I believe the phone is unlocked already since I once had WM6 on my phone. The real issue I am having is that it wont boot past the splash screen after flashing.
And that is true when re following the steps in guide. After flashing to the button rom it will not boot past the splash screen.
Click to expand...
Click to collapse
Already got it. Thanks I am trying to load it now. But the only thing is that the last time it failed and I can understand what the error says. I know the number is 300 but can read the language.
But I will let you guys know when this load completes.
Thanks again for all the assistance.
No worky worky. The load completed and then boots the splash screen shows and then stays there.
Any ideas?
Try to remove the battery and let it out for at least half an hour. Then put it back in and see what it does then.
I thought the same thing too. So when it got done last night, out of frustration, I removed the battery and left it there to wait on when I get off work today. I will report back on what happens.
Again I would like to thank you guys for helping me. I really do appreciate it!
STEP 1 install the original manufacturer ROM
T-mobile UK
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
T-mobile US
http://www.t-mobile.com/wmupgrade/
Search for the original rom for any other
instructions on how to use the original rom can be found here
http://support.t-mobile.com/knowbase/root/public/tm23294.htm?&A2L.SERVICE=AboutUpgrading
Put it in the bootloader mode.. ( three color screens )
hope this helps..
cheers
Praneet
Ok I did that and it gave me ERROR 296: UPGRADE ONLY
Then it tells me that the NBF file cannot be used for my PDA Phone. Please get newer NBF file.
Is there any way I can get the Tmobile splash and IPL\SPL number back to original, it doesnt need to boot all the way into WCE but atleast show the same numbers and splash during boot up?
Or any other way to get this thing to work?
Thanks guys
BTW it is a HTC Wizard from T-mobile.
If you are getting an error 300 you need a newer rom update utility, and regardless if your phone is a G3 or G4 it needs to be unlocked before you flash any rom.. LOAD a OFFICIAL cingular ROM onto your device before going any further, then unlock your phone either via www.imei-check.com or through some of the tools offered here...
Which one should I down load from Cingular? Even though I have a Tmobile phone?
what ipl and spl are you using and what radio are you using. Just post all the numbers from the bootloader
As soon as I get home, I will post them.
Thanks
Ipl 1.01
Spl 3.08
Thanks
Drunknasty said:
Ipl 1.01
Spl 3.08
Thanks
Click to expand...
Click to collapse
uh oh. someone tell me if I'm wrong, but I think this is bad. it's the result of flashing a g4 with g3 or the other way around... keep searching, and good luck.
flash the original t-mobile rom. your phone doesn't appear to be unlocked. good luck
first of all sorry for y English...
Ive been read the threads about that, but ive this problem:
i ve a hardspl 3.29 and trying to downgrade to original rom the flashing process stops at 15%.
i can install only custom rom and so i cant reverting back to original rom and spl.
ive been tried to flash first the spl but not working...
someone can help me please?
thx!!
wow, I don't think I've ever haleard it this way before. Usually you can't upgrade to a cooked ROM, not the other way around.
So, you get no errors while installing a cooked ROM, but it stops at 15% when trying to downgrade...
I know that some shipped ROMs flash the SPL at 15%, so this must be the problem.
Undortunately, I am a lucky one who has never had anything bad happen to me while flashing (besides my laptop running out of battery), so I don't really have much advice to give you, but I'm sure somebody else will.
Sorry, hope it all goes well for you
HardSPL prevents itself from being replaced. You need to run JumpSPL or SSPL-KAIS on the phone when it is running WM as normal, which will switch you to triciolor screen, where you can flash the original SPL.
This should be detailed in the "How to revert to factory state" page in the wiki.
thx but ive been done all and now my kaiser it's brick on bootloader:
dont allow to flash hard spl
dont allow to flash custom rom
dont allow to flsh original rom
Help PLease!!!!!!!
tried with mtty but nothing...USB PORT CAN NOT OPEN
Try that sticky thread? http://forum.xda-developers.com/showthread.php?t=423486
kilrah said:
Try that sticky thread? http://forum.xda-developers.com/showthread.php?t=423486
Click to expand...
Click to collapse
tried but no chance...
my suggestion is to search this forum for "stuck in bootloader"
you're sure to find something there
mbarvian said:
my suggestion is to search this forum for "stuck in bootloader"
you're sure to find something there
Click to expand...
Click to collapse
now...
solved the stuck problem on bootloaderwith mtty for Vista, but with hardspl it's impossible to flash an original rom on the device (flsh stops at 15% error 226-flash error- wath is?)
so...i want to flash an original rom: waht can i do? help needed please...thx!!!
always prpblem in falshing original update...flashing process stops at 15%. ive downgraded at wm6 with spl 3.07.
ERROR 226
Hi guys,
*Information contained in screenshots*
Posted a topic about a non-rooted G1 with only access to fastboot and hboot.
I was told that I would have to flash a signed ROM to solve my problem but unfortunately, after proceeding through the full ROGERS G1 downgrade guide by Haykuro, the problem still persists.
The only thing that could have gone wrong during the rooting process is the installation of the wrong recovery through flashrec (it only allowed for remote install for a 32a install).
Here is a screenshot of the phone in hboot for you to get all the info (spl, radio etc.) and a pic of the phone's screen past the splashscreen.
Anybody know how screwed I am?
adramelch said:
Hi guys,
*Information contained in screenshots*
Posted a topic about a non-rooted G1 with only access to fastboot and hboot.
I was told that I would have to flash a signed ROM to solve my problem but unfortunately, after proceeding through the full ROGERS G1 downgrade guide by Haykuro, the problem still persists.
The only thing that could have gone wrong during the rooting process is the installation of the wrong recovery through flashrec (it only allowed for remote install for a 32a install).
Here is a screenshot of the phone in hboot for you to get all the info (spl, radio etc.) and a pic of the phone's screen past the splashscreen.
Anybody know how screwed I am?
Click to expand...
Click to collapse
you're not screwed at all if you can fastboot. esp. on an unrooted g1.
do me a favor, on the screen with the exclamation point, open your keyboard and push ALT+L.
That'll get u a menu, do a data wipe.
Thank you! That solved it but now everytime the phone is turned off and is turned back on. I get to that famous screenshot of death.
Any clue?
Thank you for your reply! Much appreciated.
I recently rooted my 3vo with the HTC method so I could flash an ICS rom. For some reason I can't get it to boot into ICS though. When I power on the device after flashing, I get the first android splash screen but I can't get it to load any further than that. I couldn't find any clear answers as to why. As far as I can tell, twrp loaded the rom without any issues. I noticed that I still have S-ON but as I understand it, that doesn't matter. I have HBOOT 1.5
Anyone else having this problem? Any suggestions/fixes?
Thanks in advance.
U need s-off else you cant flash anything to your system partition =]
Ah, thank you; I guess my information was wrong.
Does anyone have a good way to get S-OFF with the 3D?
Thanks again.