Database Info

AUDIOVOX PPC4100

COULD ANYONE TELL ME HOW TO USE OR IF THERE IS A BOOTLOADER FUNCTION ON THE PPC4100 LIKE THE SX 56 SO I CAN DOWNLOAD AL YOUR PROGRAMS LIKE I USED TO DO WITH THE SIEMENS THANKS CESARE

PPC4100
Please, my cellphone no connect bluetooth. Can you help me? The problem is... when click for to connect, answer that no have the hardware.
Thank's

Imate 8502 GPS Problem?

Hi guys,
Recently I bought Imate 8502. Everything works fine. I have installed tomtom 6.01 for wm6 (which works fine on my other htc p3600i)
Now problem in in Imate 8502 when i go in to the settings>External GPS>Hardware... it shows me "gps Hardware port "(none)". If I select any port and press ok and open it again, again it shows "(none)" in gps hardware port. So whts wrong with that.
Also tomtom is not working in Imate 8502. in tomtom software setting doesn't show gps port.(like in htc p3600i gps settings shows that gps in com9). I tried too much to solve this problem but got failure and failure. So I am asking help from any expert here.
Please help me.. I want to run GPS software in Imate 8502
Thanks in advance

1. u need to turn on gps manually
2. u need GPSgate

Thanks
Thanks netnerd,
well i turned it on manually as well but same things happens ?
by the way how does gpsgate will help in this problem? I have no idea of this software.. Though i have downloaded demo but I am not getting this software
thanks bro !!
waiting for your reply

tomtom cant see your build-in gps port
GPSgate will make a virtual gps comm port that gps programs able to see

Need Some knowledge
Dear Chintak i also have an 8502 but still serching for upgrade as u said u upgraded it with tomtom it realy works and how is the procedure to upgrade
will appriciate help .

hi ayesha,
I didn't upgraded anything in imate, I just installed tomtom for ppc.
but tomtom can't read gps port so m looking for another option

OK - hope this helps some....
I have the I-mate 8502, and TomTom 6 running fine.
Things I did:
- Installed TomTom...
- Went to Wireless Manager and enabled GPS. These are my GPS settings by tab (can get to them via Wireless Manager):
>Programs: GPS program port - COM9 (default setting
>Hardware: No GPS port specifed (not needed) and baud rate 4800 (again not needed) - these are default settings
>Access: Manage GPS automatically is checked (again default)
The only setup in TomTom was to set the GPS device to the IMEA option.
TomTom should see the device, but display a message that no gps satellites found or it searching. It usually takes a couple of minutes for the GPS to pass through satellite information to TomTom first time but it then works great.
Running the Telstra WM6 Rom

I followed Rathalian's instructions and it worked perfectly for me too.
I did have to select COM9 as the COM Port of the GPS device in Tom Tom Configuration.
I am also using a Telstra WM6 ROM.

Thanks everybody its working now thank you very much everyone

i-mate 8502: Anybody sells display or phone? /alguién vende pantalla o teléfono?
Good afternoon, folks
I was relatively happy with my i-mate ultimate 8502 till I dropped it and the display broke.
As I'm against buying new stuff if you can at a reasonable price fix something, I'm asking:
is anybody willing to sell almost altrusistically a display or even the whole phone? We could do it through the normal channels (paypal, google, ebay,whatever). Or in person, I'me based in Spain.
Warm regards,
Manuel

TMC usage with iGO8

Has anyone have any successful experiance with iGO8 using TMC on a PDA?
In short- I have a GNS trafficbox TMC reciever. I have iGO8 R3 and I ahve a P3600 (trinity) phone. The phone has WM6.1 operating system..
Trying to config it to be able to identify the hardware (it is physically connected to the mini USB on the phone there are 3 variables. TMC protocol (I assume GNS) , COM port, and baud rate.
I have tried any combination possible (including all auto) and get one result- 'NO TMC hardware found'
Does anyone knows how it can be configured? Another 'rumor' I read on the forum is iGO8 8.3.x does not have a working TMC at all, and that 8.0.x recognize the hardware but nothing further.
I know it is more an 'iGO' question than XDA, but it is related, and this forum is the only forum I know with responsive people and knowledge.
Thanks in advance
BigE

I've emailed NavNGO Israel about this as i wanted to use a special positioning system for a friend who's in the military.. unfortunatly, I would have to tell you that unless someone found an unformal solution which I don't know about, you will have to give it up.
you can use a TMC with bluetooth tho... http://www.gns-gmbh.com/index.php?id=72&L=1

Asus P320 - Disable static navigation

Hello,
Does anyone has already disabled static navigation on this device (Asus P320)?
I already used a lot of GPS tools to work with the Sirf III hardware. It seems the hardware is locked or something, preventing changes to it.
AplSirf and TechSirf don't seem to work...
Any idea please?
Thanks in advance

Try upgrading firmware.
I also used several navigation softwares in some countries never had any problem. & I think P320 have SiRF II chip not III .
Regards,
Amey.

Problem with Bluetooth SPP...

Hello,
I'm a last year student engineering, working on my thesis. I wrote an application for my phone (Rhodium, but doesn't really matter) that can connect my phone to the hardware I designed, using an Serial Port Profile (Bluetooth). This works, but the problem is that any baudrate higher than 57600 crashes the application... The Bluetooth module I used on my hardware can be configured for 921K, and I really need that speed! The connection is just toooo slow right now. Does anyone know what the problem might be? Is SPP limited to 115200 baud? This seems unlikely, because I can configure the module with speeds that are much higher...
I would really appreciate it if someone can help me!
grtz,
Bert

Nobody who can tell me something about it, or know where I can find more about this?
Grtz,
Bert