hi,
newbie in this forum and newbie in using a phone running an operating system. please help.
bought the phone in late June 2008, received it before the month ended, installed TomTom Navigator 6 on it and tested the various hotspot around my place, happy with it and stashed the phone on a safe place in the closet as T-Mobile don't have 3G service. then last week I decided to get an ATT plan (can't stand the iPhone 3G ad) so I can tasted the blazing HSDPA speed.
last week on Wednesday I use the phone as a GPS to get me to a hotel I'm staying near the White House. it got me there no problem. then the next day, the horror started. I was trying to plot a walking course to many of the nearby "stuff to see" and the phone just sits there saying that it can't get a valid GPS signal. then I tried to go to Google Maps using IE. the screen started scrolling, literally scrolling, then when it stopped, whatever usually on the top ended up in the middle of the screen, the bottom ended up on the top, and the screen was "split" in 2 with the edges staying dead center. so I thought, ah, this phone is just too tired, it ran out of memory (as all windows always does ignoring how much ram you put, at least in my experience), so I press the power button to let it do the light sleep. when I turned it back on, the phone seems to work the problem out and I tested it by going online.... guess what, the screen started scrolling again and even adding "I can play dead". the screen is not responding to anything (touch, tap, swipe, rotating the scroll wheel, pressing the buttons) beside the power button that seemed to turn the display off. when I turned it back on, the screen just gives off some light on the sides, but that's it, the screen is blank. taking out the battery doesn't even fix the "blank" screen thing. the device seemed to work out the problem after I left it unused for about 2-4 hours, but then it started again when I tried to do anything (all I ever do with my Touch Cruise is going online via wifi and/or att data plan, plus using the phone as GPS).
even after resetting the phone to a factory default doesn't help (did it this morning via a representative guidance). so I'm stumped. within a week, the phone basically broke, then how about another year? will it become bits and dust?
anyone can give me advise? one representative I talked to said that I can get a replacement for the phone but the last one I talked to said that HTC only have an option of repairing the phone but not replacing one.
thank you to all who reads.
Really weird.
Try to get replacement, if not possible, get it repaired.
If hard reset / factory default did not help... It does sound to me like malfunctioning device.
On the other hand... is it provider locked device or unlocked one?
I guess it's unlocked, but I'm bit confused since you mention both T-Mo and AT&T...
I do hope that there's original ROM on it...
For what it's worth, my XDA Orbit II has just developed the exact same fault. I tries soft and hard resets, re-flashed with 6.5 rom and then a 6.1 version, all to no avail. It goes through the boot sequence and asks for a screen calibration - if you ignore the scrolling screen and tap in the right places, the calibration is accepted (which makes me think it's not the digitizer. The screen itself seems to be fine - no missing pixels, cracks, - it displays everything it should only with a constant vertical scroll. If it had a vertical hold knob, I could fix the problem.
Really weird, it was working fine this morning and after sitting in its cradle for a couple of hours it is now like this.
Any ideas as to how I might cure the problem would be gratefully received.
Hi Guys,
I just recently had a problem with the screen of my 750. The screen stops responding after the first touch.
I would like to know if theres is a way to skip this alignment screen process. Right now i´m stuck at this screen.
Thanks for your help
http://forums.palm.com/palm/board/message?board.id=hardware&thread.id=16220
I think this will help u.
jesusodin said:
Hi Guys,
I just recently had a problem with the screen of my 750. The screen stops responding after the first touch.
I would like to know if theres is a way to skip this alignment screen process. Right now i´m stuck at this screen.
Thanks for your help
Click to expand...
Click to collapse
After using my used Treo 750, WM 6, AT&T for about two months, it started experiencing the screen problem. Upon hard reset, the screen would respond to the first tap, and be almost unresponsive to the calibration. I had to press repeatedly very firmly. Went through a couple of hard resets and it didn't get better.
The screen would respond find for a while and then start working. I thought that I had it all taken care of and was working well yesterday until the afternoon rolled around. It started being unresponsive again. After a hard reset, it would respond to the first touch and then calibration barely worked.
Finally, I was able to get into it and installed Palm's Device Reset and ran it. It has since then been calibrating fine. I'm only using it bare bones right now and won't be able to test it more in depth until this weekend to see if the problem is resolved.
I did notice using SKTooks that the gwes.exe process was running at a high percentage while this was occurring, near 40-50 % when it is running at 0% now.
Any thoughts? ANyone tried the device reset at:
http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,kb=PalmSupportKB,t=ooccase,case=obj(9260)
Treo 750 touch problem
Hi , I'm having the same problem wit my Treo . Did you solve your problem?
Hey Davidoff,
For quite a while, mine acted up, so much that I bought a used Wizard to replace it. Even after performing the device reset as I noted above, it would still be unresponsive at times, with the GWES.exe process (as shown by SKTools) running much higher.
For a while, I let it set without it's battery (perhaps a week) and then reinserted, fully charged it and immediately disabled ALL today plugins. So far, it has been running great but I'm very tentative to switch back to it as my primary phone, even though I love it.
I'm wondering if you can try disabling your today screen plug-ins, set the screen backlight to dim at one minute and the device to auto-off at one minute and see if this helps to resolve the issue. I'm curious as to whether any of those three combinations made a difference in mine, or have just bought time until it acts up again.
Anyways, I'd be interested to learn your results.
Brian
I have a HTC Tytn II and for the past month and a half I have been using the Android OS (Haret) on it. Just a couple days ago it somehow went to the Tricolor screen. I can always boot up Windows Mobile by plugging in the usb charger and then soft resetting it but it I think there is something wrong with my phone. Sometimes my keyboard doesn't work when I'm running Windows and sometimes I cant hear calls. When I boot up Android sometimes the buttons on the front wont work with the exception of the directional buttons. Every time I reset it, it goes to the Tri Color screen. I need to fix this.. can anyone help me?
Hoz said:
I have a HTC Tytn II and for the past month and a half I have been using the Android OS (Haret) on it. Just a couple days ago it somehow went to the Tricolor screen. I can always boot up Windows Mobile by plugging in the usb charger and then soft resetting it but it I think there is something wrong with my phone. Sometimes my keyboard doesn't work when I'm running Windows and sometimes I cant hear calls. When I boot up Android sometimes the buttons on the front wont work with the exception of the directional buttons. Every time I reset it, it goes to the Tri Color screen. I need to fix this.. can anyone help me?
Click to expand...
Click to collapse
Android on Kaiser is as beta as it gets, if I were you, I would flash back to a stock rom and start testing to see if you have software, rom or hardware problems
I did a hard reset and I still have the same problem. It continuously goes back to the Tri Color screen and sometimes my keyboard doesnt work when I am typing texts. But the Android was running very smoothly. I used it for over a month. Could dropping my phone have caused this?
Hoz said:
I did a hard reset and I still have the same problem. It continuously goes back to the Tri Color screen and sometimes my keyboard doesnt work when I am typing texts. But the Android was running very smoothly. I used it for over a month. Could dropping my phone have caused this?
Click to expand...
Click to collapse
That would do it ! Like I said, try flashing back to the stock rom amd see if that solves any issues.
Hoz said:
Could dropping my phone have caused this?
Click to expand...
Click to collapse
Lol thanks for that I needed a good laugh. Next you'll say things rattle inside it when you shake it. Or it's no longer waterproof after you went for a swim.
As previously stated, reflash and check that way. If no joy you might wanna open her up and check the guts for any loose connections.
Within the last hour my touch screen will not work or respond to anything. I have done a soft reset, removed the battery and nothing. The buttons on the phone work (send, back, home etc.) but the screen wont respond. I noticed a little oil spot in the last few days but it was working fine. I need some help here
I too..
am having the same problem as of this morning....
I got this problem 2 days ago. If someone changed the screen and it started working please reply it.
Same here.I used to flash NRG's Roms and i had always the same issue.The screen was tapping by her self at the down left side.Only by soft reseting the device it was stopping.Now i tried 2 flash another rom but unfortunately, i'm stuck in the beggining.And 2 be more precise at the screen alignment procedure.Nothing works except the buttons but in this moment are useless
Check this out.It might help
http://forum.xda-developers.com/showthread.php?t=355010
Same problem! I also have the little blue oil spot. Not sure how it happened -- could've sworn it was safe in my pocket since the last time it was working. Did it get wet or something?
http://www.fixya.com/support/t1823859-htc_touch_pro_touch_screen_stopped
Hi everyone, this is my first post here. Thanks in advance for any help that you folks can provide.
I've had the TF101 for about six months now, and it's been fine. I was using it yesterday on the train and all was good, but when I got home and took it out of my bag it didn't seem to start up. I thought it might have been a battery issue, so I let it charge overnight. Tried starting it up this morning and I got the same results. So I started looking in to other issues.
The tablet is definitely starting, adb will recognize it in its list of devices, and if I plug it in to my tv or desktop monitor w/ HDMI, I can see and interact w/ the Transformer UI (of course this is kind of painful since I have to do some guessing about where to put my fingers).
I had rooted it using rebound821's scripts and directions here, so tried an unroot to see if that was the problem. I ended up with the same results.
Does anyone here have any insights as to what the problem may be? I'm hoping to avoid sending it back to ASUS, so I'm fine w/ opening it up to look for loose cables.
So I thought that brightness might be the problem. Maybe it was set to 0 and I just wasn't seeing anything on my screen. Sadly, that doesn't seem to be the case.
I tried setting brightness at the path below to to 0, 50, 100.
/sys/devices/platform/pwm-backlight/backlight/pwm-backlight/brightness
Still no luck.
Has anyone encountered anything remotely similar to this (even if similar is just a dead screen)?
There have been others with dead screens reporting what you are, at least I have read a few reports, I think they just had to get them RMA'd, I don't recall anyone 'fixing' a dead screen, especially if you still have adb and touch working then the screen itself and backlight seem to have broken completely- some have reported the backlight dying and thinking the screen was broken, but it was just the backlight (I guess in bright light they could see pixels working, but couldn't make out what was on the screen without the backlight). I still think they had to get it repaired either by Asus or by someone who was capable of doing internal repairs with replacement parts..sorry for your luck
Looks like I'll have to send it back. I took it into the brightest light I could find and couldn't see anything at all. Guess it's the screen and maybe the backlight too. I'm pretty disappointed this happened, the only thing I can think of is that the bag I had it in was hanging from the chair in front of me on the train and it was swaying a little, and that shouldn't be enough to dislodge a connection. Either that or just some freak hardware failure. Still, I guess it's not that common of an occurrence. Thanks for the reply, I'll slink off and try to get in touch w/ Asus now.
I have experience same
My TF101 broke in the same way, screen blank. Conected to tv I`ve got image digital touch work. I shut down my TF101 normaly and screen never go back to live again. Tablet was in a protective bag (when I trave by car), just no reason for not working ( no problem at screen, previously, screen perfect - no dead pixels)
Did you guys get this resolved? I had the EXACT same thing happen yesterday. Was working just fine. Put it in its sleeve, into a protective case, into a briefcase, got home and dead.
HDMI works. I tried to call Asus but they say i'm out of warranty.
Thanks in advance.
Must be something wrong with the connections that it decays over time. I've had mine since October last year and its been fine except for today when I brought it home it wouldn't work.
I was able to fix it though. I held it vertically with the bottom edge down and tapped it firmly on my desk a couple of times. The screen came back on. There is a strong possibility that this will happen again and my tap fix won't work, but it's working at the moment
Asus Transformer screen
elementalfire23 said:
Must be something wrong with the connections that it decays over time. I've had mine since October last year and its been fine except for today when I brought it home it wouldn't work.
I was able to fix it though. I held it vertically with the bottom edge down and tapped it firmly on my desk a couple of times. The screen came back on. There is a strong possibility that this will happen again and my tap fix won't work, but it's working at the moment
Click to expand...
Click to collapse
I had exactly the same problem discussed in this thread. I was also able to bring the screen of my TF101G to life by tapping it firmly on my desk with the bottom edge. It works for now. But it is certainly disconcerting to know that some connection in this rather expensive gadget are loose and all this can happen again. I guess I will not carry my transformer around any more - just leave it at home...
spokey said:
My TF101 broke in the same way, screen blank. Conected to tv I`ve got image digital touch work. I shut down my TF101 normaly and screen never go back to live again. Tablet was in a protective bag (when I trave by car), just no reason for not working ( no problem at screen, previously, screen perfect - no dead pixels)
Click to expand...
Click to collapse
Same problem here had my unlocked bootloader tf101 for awhile now, one of the first ones out... had a great life gave it to my girl when i got the transformer prime and the screen just went out yesterday, still goes in apx mode and still recognized by computer, screen just straight up died, think it's too late for a manufacture warranty, maybe ill look but think it's gonna be no dice... sucks obviously something in the design to make this happen to so many of them...
My TF101 appears to have a dead screen. I am rooted and running Revolver Custom Rom. When connected to my pc, I am able to recognize my device. My screen will not turn on so I cannot use recovery to go back to stock. I am set up to use ADB, however, I am not very knowledgable with ADB. I am convinced I have a bad screen and I am still under warranty. Is there a way to return the TF101 back to stock using ADB? If anyone can point me in the right direction, I can probably figure it out. Otherwise, I may just try and replace my screen and see how that works out. Thanks for the help.
My backlight died on Tuesday. Similar situation of working in the morning, headed into work with it in my bag, no brutal knocks or anything but one jolt just must of finished it off after a year and 2 weeks abuse (yes 2 weeks out of warrenty).
Going to attempt to take it apart this afternoon and play with the ribbon cable as reseating it has solved quite a few peoples problems.
Woo! It worked! Very happy chappy.
Sent from my SK17i using Tapatalk 2
Same thing happened too me, first time i sent it to service, but last time i opened it myself and pushed the connector for the screen thightly in place.. worked nicely
Sent from my Transformer TF101 using xda app-developers app
Screen goes derp
I don't know if I have the same problem or not.
Backstory: I own a Transformer TF101 that I got for my birthday from my girlfriend. It was meant for travel and bs'ing around at home. Took it into work and quickly realized that I could use this for work. That went over so well that the rest of the office became intrigued. Once these came on sale on groupon, the office manager went all in on 10. These are all refurbished transformers with docks.
They have all been handed out and I now have a transformer for home and work. Kind of nice...but I do a lot of site observation so using my personal transformer was a risk that I had to take all on my own (survived a 5' fall off of a parapet wall already).
The problem: From the first 5 minutes that I had the thing, the transformer screen went blank. I opened up google play to download a few apps that I could use for work. Scrolling down I saw some choppyness which I considered the processor/memory having issues loading everything on the screen. Before I knew it - boom blank screen. Rebooted and the loading screen stays on for 2 seconds before the screen goes blank. I can tell it's working because it plays a sound at start up. I can also tell the screen is lit up (it's like it's showing a grey screen because it can't show true black colors). If I hit the power button again it goes completely black. I hit the power button again and the screen flashes to the lock screen and immediately goes blank again. I could do this over and over and over again.
Anybody having the same problem? It's refurbished....I'm guessing apparently I got the dud.
I ran into pretty much the same problem. One morning, the tablet screen would just not turn on. Sometimes, it came on and immediately shutdown, but it is still on the "On" mode. Hit the power button again will bring it to the off mode. Toggle it one more time, sometimes, will turn on the screen a off again. I was able to get it back to work with a factory restore. However, it has the following problems.
1) As soon as I adjust the brightness, the screen will go off again. And there is nothing I can do to bring it back except another factory restore.
2) The screen will flicker (and sometimes produces some clicking sound) when charging with the screen on.
Looks like my TF101 is having same issue, screen gone off suddenly (hdmi shows up in TV fine)...I am going give a try on reseating the cable hoping it resolves the issue.
leonpr, is there some tips/things I have to make sure before attempting this. I found a guide here and another youtube video on this issue as a reference...
Thanks..
Screen won't turn on unless factory reset "fix"
My girlfriend has an ASUS TF101. If the brightness goes up to 60%, the screen is blanked (no backlight either) and the only way to get it to turn back on again is to hard reset. This coincidentally happened at the same time as an update from ASUS. After lots of Googling it does not appear to be related. I was hoping it was and installed several custom ROMS which all experienced the same issue.
As a temporary work around, until I get the guts & the money to be able to replace her tablet if I break it, I found and installed AutomateIt. I set a trigger so that when the screen is turned off, the brightness is set to 50%.
Why trigger when the screen is off instead of when the screen hits above 59%? If you have this same problem, hold the brightness and go all the way until the screen blanks and then still holding your finger on the screen, move it all the way to the left and you will notice that the screen did not come back on. Press the power button once to turn it off and then again to turn it on and you will see the screen at the lowest brightness setting.
So, with the trigger in place, if you accidentally (or one of your rotten kids intentionally:angel raises the brightness above the threshold, simply press the power once to turn off the screen and then press it again to turn the screen on.
Just a note, I ended up installing AutomateIt Pro, Available for $1.60 from the Play Market. The free version works fine, but my girlfriend has been struggling with this issue for a couple of months and after so many hard resets, the little app is more than worth the money.
Have you tried Power + Volume Down for 15 seconds, and then leaving it alone for one minute? It will cold boot. Try that and it may work. Just saying; Hope it will help
Sorry for the necro-bump but here's the actual solution.
Problem: The video cable inside the Transformer comes loose and just needs to be pushed back in.
I can't post a link since I don't have 10 posts yet so just search youtube for the following key words:
blank or no display issue on the asus transformer - fix
The user who posted the video is DoCWaSaBe
Tokyudo said:
Sorry for the necro-bump but here's the actual solution.
Problem: The video cable inside the Transformer comes loose and just needs to be pushed back in.
I can't post a link since I don't have 10 posts yet so just search youtube for the following key words:
blank or no display issue on the asus transformer - fix
The user who posted the video is DoCWaSaBe
Click to expand...
Click to collapse
Just fixed my blank display problem on a TF101 which is well out of warranty. Here is the link. I found the connector loose after dropping my TF101.
Thanks!
Fix lasted for a few days, now backlight dead, tried all cables again. No joy . I hate intermittent faults so ordered a Samsung Galaxy TabPRO 10.1.