Related
Upgraded to Dop ROM form original Imate ROM. Now I can't get back. Upgrade is stuck at 95%..or I get Error [296] "Upgrade only This NBF cannot be used on your PDA Phone.. Please get newrer NBF file" . If flash Dop again it works, but refuses to flash any Imate. I guess I'm not the only one here having this problem...many have posetd this problem in different ways but now one gave a concrete answer.
Please let try to solve this.
Thanks
whehe, i'll ask someone who flashed mine back to a JAMin (thought he did it with a-wizard, hope he can help you out).
only the OS itself can be flashed back, you manually have to replace the extended ROM with the JAmin one (total commander, delete existing extended ROM, transfer files through IR to exdended ROM, hard reset to install the extended ROM, bla).
the GSM ROM and the bootloaded itself cannot be flashed to an older version.
yeah, i know, it sucks
Thanks tCC for replying with this goosd news. As for the extended ROM replacment, that's OK and can be easely done.
I realy appreciate your assistance in this and awaiting your next post.
Hi,
i'm the one who flashed the JAMin of tCC. In fact, it's not that difficult. Just follow these steps:
- execute enablerapi.cab on your device (search on the forum for this cab file)
- download awizard, extract
- copy the jamin os rom to awizard\rom\Jamin\
- start awizard.cmd, make sure your device is connected through activesync
- select option 'w' to write the os rom. just follow the instructions.
- the flashing can take up to 30 minutes so be patient
-if the flashing has finished hard reset your device
I've uploaded the jamin os and ext rom to
ftp.xda-developers.com/Uploads/Prophet/JaminAwizard/
tya
swartb said:
Hi,
i'm the one who flashed the JAMin of tCC. In fact, it's not that difficult. Just follow these steps:
- execute enablerapi.cab on your device (search on the forum for this cab file)
- download awizard, extract
- copy the jamin os rom to awizard\rom\Jamin\
- start awizard.cmd, make sure your device is connected through activesync
- select option 'w' to write the os rom. just follow the instructions.
- the flashing can take up to 30 minutes so be patient
-if the flashing has finished hard reset your device
I've uploaded the jamin os and ext rom to
ftp.xda-developers.com/Uploads/Prophet/JaminAwizard/
Click to expand...
Click to collapse
First let me thank you swartb for replying and trying to help by posting and uploading. And of course tCC who offerd to help in the first place.
Second, the link for the file you uploaded is not correct, and if you allow me i think this is the right one:
ftp://ftp.xda-developers.com/Uploads/Prophet/JaminAwizard/
And as far as enablerapi.cab here is the thread for it:
http://forum.xda-developers.com/viewtopic.php?t=50768&highlight=enablerapi+cab
Currently I'm downloading them and will let you know the result.
Thank you both again
swartb said:
Hi,
i'm the one who flashed the JAMin of tCC. In fact, it's not that difficult. Just follow these steps:
- execute enablerapi.cab on your device (search on the forum for this cab file)
- download awizard, extract
- copy the jamin os rom to awizard\rom\Jamin\
- start awizard.cmd, make sure your device is connected through activesync
- select option 'w' to write the os rom. just follow the instructions.
- the flashing can take up to 30 minutes so be patient
-if the flashing has finished hard reset your device
I've uploaded the jamin os and ext rom to
ftp.xda-developers.com/Uploads/Prophet/JaminAwizard/
Click to expand...
Click to collapse
can you cid unlock after installing an older rom?
still it's not working...
Dear swartb,
I tried it many times over and over and I still get this error after waiting of 14-15 min. every time.
CopyFileToTFFS(acidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occured.
Please see the attached images.
Any solution? Thanks
Hi,
I don't remember if I did see that error message. But if do a hard reset after this error the os rom is not updated?
And be sure just to update the OS rom and not the other roms (radio, spl & extended) because that doesn;t work.
I have just completed this aWizard process and now need to hard reset, but the program "clear storage"is not there anymore.
How can I hard reset the prophet without the software?
I will post the steps here when it is done :wink:
Could ran the aWizard with the OS rom in the aWizard folder (not \aWizard\rom\jamin\ ) but could not find way to hard reset the prophet, so reflased back to Dopod.
Hope another person continues from here :wink:
Re: still it's not working...
ahegazi said:
Dear swartb,
I tried it many times over and over and I still get this error after waiting of 14-15 min. every time.
CopyFileToTFFS(acidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occured.
Please see the attached images.
Any solution? Thanks
Click to expand...
Click to collapse
Its because the CID of your device is still locked. And certainly you have IPL/SPL 2.00. or higher. Swart did it with no problem because he has an unlocked CID.
You have to downgrade your IPL/SPL to 1.xx (I still dont know the correct method) and then unlock CID and then you can flash any ROM you want
Re: still it's not working...
ahegazi said:
Dear swartb,
I tried it many times over and over and I still get this error after waiting of 14-15 min. every time.
CopyFileToTFFS(acidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occured.
Please see the attached images.
Any solution? Thanks
Click to expand...
Click to collapse
Its because the CID of your device is still locked. And certainly you have IPL/SPL 2.00. or higher. Swart did it with no problem because he has an unlocked CID.
You have to downgrade your IPL/SPL to 1.xx (I still dont know the correct method) and then unlock CID and then you can flash any ROM you want
Thanks. Guess I can live with it for now. The Dpod rom is quite stable. No soft reset for 2 days and response looks like quicker than after soft-reset 8)
Re: still it's not working...
Tamagochi said:
ahegazi said:
Dear swartb,
I tried it many times over and over and I still get this error after waiting of 14-15 min. every time.
CopyFileToTFFS(acidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occured.
Please see the attached images.
Any solution? Thanks
Click to expand...
Click to collapse
Its because the CID of your device is still locked. And certainly you have IPL/SPL 2.00. or higher. Swart did it with no problem because he has an unlocked CID.
You have to downgrade your IPL/SPL to 1.xx (I still dont know the correct method) and then unlock CID and then you can flash any ROM you want
Click to expand...
Click to collapse
Thanks Tamagochi, Yes you are right, I have I IPL 1.00 and SPL 2.15.0000
The problem now is how to dowgrade form 2.xx to 1.xx. What are those methods that would help? I can try all of them and see if it works.
Finally it's resolved
I'm back to my imate ROM. Detailes in here:
http://forum.xda-developers.com/viewtopic.php?t=52244&start=25
hi guys!!! is there any way to run the OS from the memory card????
maybe that way I can recover my elf from the freeze first screen????
please somebody a little help!!!!
thanks
best regards
linterna
Did you flash USPL? If you did, you can get into bootloader and flash another rom.
thanks for the answer!!! what I did was that I flashed the phone with a rom from another model!!!
so the phone power up and stays in the first screen HTC and the legend OS 4.0.0.0 and I try to use the uspl again and the computer cannot see the phone in freeze state but when the phone is in boot mode the computer can see it but in boot mode I cannot run the uspl but I can run the rom updater but I get an error all the time !!!
is there any way to re isntall the OS again from the memory card????
thanks again best regards
linterna
anybody please!!!!
thanks
linterna
linterna said:
but I get an error all the time !!!
Click to expand...
Click to collapse
What error? Did you flash USPL before you flashed the wrong rom? If so and if the rom doesn't contain IPL or SPL you should be able to just flash from bootloader (try big storage and pdaviet). USPL can't be flashed from bootloader.
vippie said:
What error? Did you flash USPL before you flashed the wrong rom? If so and if the rom doesn't contain IPL or SPL you should be able to just flash from bootloader (try big storage and pdaviet). USPL can't be flashed from bootloader.
Click to expand...
Click to collapse
I think that's the solution "try to storage and pdaviet" but I don't know what is this
can you please help
best regards
linterna
linterna said:
I think that's the solution "try to storage and pdaviet" but I don't know what is this
can you please help
best regards
linterna
Click to expand...
Click to collapse
Those are elf roms.
Big Storage: http://forum.xda-developers.com/showthread.php?t=320407
PDAVIET: http://forum.xda-developers.com/showthread.php?t=323378
If it doesn't help. Can you still answer the questions (error message and did you flash USPL already)?
the thin is in boot mode I can run the ROM updater but I have the error .....and then I put it in boot mode again but the USPL doesn't recognize the phone ?????so there is no way to unlock the cid to run the ROM because the phone only stays in boot mode
so my question is is possible maybe to run the OS from the memory card???
thanks
best regards
linterna
If you don't answer my questions I have no idea sorry! You tried flashing those two roms from bootloader? Didn't work? Well then I think it's bricked!
ok I already tryed those ROM's from boot mode ( because is the only mode that the PC recognize the phone) and I have the error (207)all the time and the USPL DOS program cannot see the phone in boot mode ....
nothing I can do with this ???? that's it????
come on!!!
thanks
best regards
linterna
Never heard of error 207, but did hear of "270 Update Error". Remove micro SD card and SIM and try again! Does it start flashing at all and then gives an error or is it at 0%? What's the error message? Be specific!
linterna said:
and the USPL DOS program cannot see the phone in boot mode
Click to expand...
Click to collapse
True, you can't flash USPL anymore (like said before), that's why I ask if you succesfully flashed in the past.... still waiting for an answer tho
sorry my mistake the error is 270 update error
and the process started untill 3% and it goes off and start in the main screen and freeze ...........and once again in boot mode the USPL canoot see the phone and when it freezes there is nothing in the usb!!!
thanks
best regards
linterna
vippie said:
Remove micro SD card and SIM and try again!
Click to expand...
Click to collapse
This is reported to solve the error 270 problem for other people.
linterna, Have you tried to flash one of these ROM's but first remove you micro SD card? It is hard to follow what you said you did to get into this problem. Perhaps you could repost with specifics of every step you made starting with the OEM ROM.
(sorry vippie, looks like we posted the same advice at nearly the same time!)
thank you guy for your answers
ok let's start from the beginning
I flashed the phone with the wrong ROM so the phone now is freezes in the first screen with OS 4.0.0.0 and then I have this problems the phone power up and freezes in the first screen and it doesn't connect thru usb .but when I put it in boot mode the usb can detect it ( there is no sim or memory card on the phone) and I can run the ROM updater but I have the 270 error all the time and then I try to run the USPL but I cannot do it because the usb doesn't detect the phone!!!!!
so it's like I'm stack!!!!!
what should I do??
any help will be appreciated
thanks
linterna
vippie said:
Never heard of error 207, but did hear of "270 Update Error". Remove micro SD card and SIM and try again! Does it start flashing at all and then gives an error or is it at 0%? What's the error message? Be specific!
True, you can't flash USPL anymore (like said before), that's why I ask if you succesfully flashed in the past.... still waiting for an answer tho
Click to expand...
Click to collapse
well I could flash the first time running the USPL but now is not detecting the phone
thanks
linterna
I'm out of options sorry.... removing cards is to me the only known solution for error 270.
literna,
Did you run the CID unlock patch prior to flashing the wrong ROM? What ROM did you try to flash and why? What were you trying to accomplish? Have you tried to hard reset you phone? If so what happened? If you did not CID patch your phone, then it may not be over written and a hard reset may recover it.
General advice: In your last post, you only stated the same things from your earlier posts which were somewhat lacking. If you are newer to this forum or to this type of phone, it will help you greatly to read everything two or three times before flashing, write or print out a step by step script of what you need to do to flash it, then re-read and compare your script against the posted instructions to make sure they agree. Then think about flashing your phone.
p.s. - The very fist post by the moderator on the Elf Upgrading page is a step by step script for flashing any (ELF) ROM to the ELF. Compare what it says and report what your did relative to that post so we can fully understand how to help you further. You may need to run the enable RAPI script to re-establsih communication, but this depends on what you may have already done.
raskell said:
literna,
Did you run the CID unlock patch prior to flashing the wrong ROM?well I didn't flash it with the wrong ROM but I flashed a couple of times before the wrong one!! What ROM did you try to flash and why?I tryed to put spanish on my ELF and I don't know what ROM I flashed it aparently a bad one!!! What were you trying to accomplish? spanish Have you tried to hard reset you phone?yes I already try (if you talking about the reset boton near to the mic on the bottom of my device) If so what happened? If you did not CID patch your phone, then it may not be over written and a hard reset may recover it.
General advice: In your last post, you only stated the same things from your earlier posts which were somewhat lacking. If you are newer to this forum or to this type of phone, it will help you greatly to read everything two or three times before flashing, write or print out a step by step script of what you need to do to flash it, then re-read and compare your script against the posted instructions to make sure they agree. Then think about flashing your phone.
Click to expand...
Click to collapse
thanks for you time to answer
linterna
alright guys... its my first time with the TILT... im comming from a Wizard ...
I downloaded the kaiser SIM unlocker and
Im not sure what the hard spl stuff is... but i tried following the instructions...
i cant get step 1 to finish..
if i click on the romupdateutility.exe icon .. i get an error saying " error [208] : file open " "the update utility cannot open the requested file please check your update utility"
IF i click on the KaisercustomRUU.exe icon in the same step 1 folder everything will work.. until i get to the progress bar , then it stays on zero... and finally tells me an error and asks me to go through recovery .. etc etc...
Im not sure one what i have to do , Im running the stock ATT hard resetted ROM windows 6.0 ,
SPL - 1.56.000
someone help me... thank you.
Edit/Delete Message
You should be familiar with the rules of XDA. Since there are threads for both HardSPL and Sim Unlocking, you should post there.
bigjoe87865 said:
alright guys... its my first time with the TILT... im comming from a Wizard ...
I downloaded the kaiser SIM unlocker and
Im not sure what the hard spl stuff is... but i tried following the instructions...
i cant get step 1 to finish..
if i click on the romupdateutility.exe icon .. i get an error saying " error [208] : file open " "the update utility cannot open the requested file please check your update utility"
IF i click on the KaisercustomRUU.exe icon in the same step 1 folder everything will work.. until i get to the progress bar , then it stays on zero... and finally tells me an error and asks me to go through recovery .. etc etc...
Im not sure one what i have to do , Im running the stock ATT hard resetted ROM windows 6.0 ,
SPL - 1.56.000
someone help me... thank you.
Edit/Delete Message
Click to expand...
Click to collapse
Try running jump spl on your phone before running hardspl, then unlock. As stated above, there are threads already set up on this topic.
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Have youtried with a previous Tomal ROM?
It worked for me in a similar problem
Good luck
kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Have you removed your SIM and SD card, before trying to re-flash?
I did
I had removed SD card and SIM card, but it stil stuck at 10%. But if I updated the radio, it will finish 100%, whwn it comes to Ext Rom and CE update, it just finished at 10%. Did I Brick my uni ? anybody can help ?
kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Pls anybody help me too! same problem stuck up and updating stops at 7%
giving ce rom update error?
Do a hard reset first and clear the phone by pressing 0 when promted
report back
kotabunga said:
I had removed SD card and SIM card, but it stil stuck at 10%. But if I updated the radio, it will finish 100%, whwn it comes to Ext Rom and CE update, it just finished at 10%. Did I Brick my uni ? anybody can help ?
Click to expand...
Click to collapse
Try to flash each part one at a time, not all of them at the same time.
Note that this ROM do not work with some extended rom and that blank page at first was the reason of that. Flash your extended rom with the tomal's own extended rom. You can find it...(oh no it has been removed, I will try to upload it for you). After flashing the extended rom try ato re-flash the rom and at last try to re-flash the radio (If you need it). Beware that flashing extended rom will erase your own extended rom so try to find one and decode its files to have your customization files back...
Hope it works
I have problem uploading file try to search for "Tomal_extrom" yourself and I will try to upload it...
Tried to flash Tomals ext ROM...but wont work too....I'm hopeless, maybe I should say goodbye to my uni,.....
same
ah i just got the tomal_extrom @ vidmes.com/xda
and now i am going to try with it will revert back
i did try the ext rom but the process failed.
can anybody help with mtty v1.16 as given in uni manual?
thnks for the help anyways buddys
digitalir said:
ah i just got the tomal_extrom @ vidmes.com/xda
and now i am going to try with it will revert back
i did try the ext rom but the process failed.
can anybody help with mtty v1.16 as given in uni manual?
thnks for the help anyways buddys
Click to expand...
Click to collapse
Seems your DOC is corrupted and unable to write.
Use mtty tool and re-format it, I'm pretty sure that everything will be OK then. But make sure that you have disabled AS before executing mtty!
pls give the action step by step, im very hopeless
tomal said:
Seems your DOC is corrupted and unable to write.
Use mtty tool and re-format it, I'm pretty sure that everything will be OK then. But make sure that you have disabled AS before executing mtty!
Click to expand...
Click to collapse
pls can u tell me the process to do it?
thnks
the wiki is your friend: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Do not try to use copy paste in MTTY, type every command.
Before doing this ( steps 1 to 17) beware that you must download an original rom to get the windows mobile rom, the radio rom and the extended rom ( see step 13).
Last time I took Tomal v8.2, his extended rom and radio 1.15, put all 3 in the RUU folder and runned the update utility. It will take arround 20 minutos to flash the 3 files. thx to TehPenguin you can get these files here: http://vidmes.com/xda/Uni/ROMs/Tomal/ and here: http://vidmes.com/xda/Uni/Radios/
Be advised that I've not read the other posts on the thread, so I don't know if you should try this process or not.
Cheers
ultravox said:
the wiki is your friend: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Do not try to use copy paste in MTTY, type every command.
Before doing this ( steps 1 to 17) beware that you must download an original rom to get the windows mobile rom, the radio rom and the extended rom ( see step 13).
Last time I took Tomal v8.2, his extended rom and radio 1.15, put all 3 in the RUU folder and runned the update utility. It will take arround 20 minutos to flash the 3 files. thx to TehPenguin you can get these files here: http://vidmes.com/xda/Uni/ROMs/Tomal/ and here: http://vidmes.com/xda/Uni/Radios/
Be advised that I've not read the other posts on the thread, so I don't know if you should try this process or not.
Cheers
Click to expand...
Click to collapse
mtty do not format radio rom, so you don't need to re-flash it.
No progress
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx
kotabunga said:
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx
Click to expand...
Click to collapse
AS means active synchronize. Disable USB connection in AS. It has been written there bro...
kotabunga said:
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx
Click to expand...
Click to collapse
my friend,
active sync AS
ok
well i am just back on my chair so looking forward to do it right away
will keep u posted
tried ! but in vain!
yes i have already gone through the wikipage and tried it but after typing the command it just says its invalid command.
i have tried all the ways i can with mtty given in wikipage with no results positive.
pls can anybody suggest the commands for doc format
again thnks
hey!
after much gogling i got mtty1.16 and tried but it does not show the usb port.
so again googling does it support usb 2.0
i think it doesnt.
ok i will try on my old laptop with usb 1.1 tonight at home.
Tomal 1st thnks for ur help and valuable time
can u pls give the details for properly formatting the doc [pls.
any luck ? I dont....my uni still dead...tried with usb 1...no luck...
Any body please help me i am getting error (270) after 3% update on ruu.
My vox is in dead condition and i think this error can be remove by uspl but my phone is dead how it could be please help me
if this problem occur in vox during flash first unlock ur phone by sda application unlock after that go on vox uspl cid by pass click know click on uspl_jockyw.bat after this process the screen go blank after that open vox uspl ruu folder click rom update utility exe if in this process u face problem than shut ur phone restart again click again on jockyw. bat if u screen did not go blank try again if screen go blank then do same process if u use all this process from directly zip folder they did not work first extract all files from zip folder if this process not understand i suggest u download vox orginal wm6 rom file from xda ftp site this rom are easy install and make ur phone back alive and working after that u can easly install any roms i face same problem during my first flash but know i my use wm6.5 rom in vox
for more info..
http://wiki.xda-developers.com/index.php?pagename=vox_uspl
again
personily i sugeest u install back wm6 rom first for ur phone to come back in working condition download from xda ftp site in english language
thank for reply sir. as per your sugession i have serch ftp://xda but there is no vox please help me or give me any direct link please
http://wiki.xda-developers.com/index.php?pagename=vox_roms
link
open this link i post u
ftp://xda:[email protected]_WWE_1.34.405.1_4.1.13.54_03.10.90_Ship.exe
sir i have downloaded the file and run ruu but it is also giving error after 3% please help me
okay
i think this wm6 rom file are exe so they did not need any process first download the file then click on it they install automatic in ur phone
bootloader
driect bootloader for dead htc s710 go this link http://wiki.modaco.com/index.php/HTC_Vox and read bootloader process and do that same