Related
does anyone know a good working program that shows ur txt msgs like if they were instant messages??
the palm sms threader hacked from the trio....i couldnt live without it...pure awesomeness
do u know where i could find it?? dying to try it out..
umm here ya go
o and i got the oem for it if u wanna put it in ur own rom...OEM thanks to mfrazzz
sorry toke so long problems uploading :S
edit by faria- attachement removed because of legal reasons, requested by palm....sorry guys.
your gonna need to delete all ur txt messege b4 installing....this will compleatly take over ur txt messeging app the one on ur phone will be deleted if u install this so b aware of this....read around about this program
make sure u no what ur doing b4 installing this cab
is there any going back if i do install it??
umm from my experinces no...hte only way to go back is to reinstall the rom...if u install it u will defently loose all ur old txts if thats a problem...if i were u would do a PIM backup over all ur stuf incase it doesnt go well......it defently works for me...there isnt a rom i install that i dont install this cab or edit to put in the oem for it.....i could not live without it....but i would make sure i knew how to reinstall roms and have done so(install roms b4 hand so u no how to do it readly) b4 i installed this cab
not to scare u off but u can mess up stuff with this cab...i have b4...and toke me a while b4 i made it seamless
Try PocketCM that has sms threading included.
http://forum.xda-developers.com/showthread.php?t=320544
Thats right, PocketCM SMS looks like IM.
Anyone tried both PocketCM and this one? Which ones better?
well the txt is built into the pocketcm app, which makes it suck. It's a great tool, but there is no quick way to text. You have to manually open up the contact, select sms, then wait for it to load up. If you close pocketcm, and receive a message, it doesnt open in pocket cm unless u manually open it.
I had a problem with the palm threader, where my gf kept getting double text from me. I just uninstalled it and it removed itself and went back to normal arcsoft mms manager thing.
well i'm using palm app for 7 months and i think its far better than pocketcm (in this stage..)
palm app is quick and you NEVER lose any sms on reset. backup is simply - just copy one fil from windows to storage card...
pocketcm currently dont mark messages as "read" so you must read them twice.. and doesnt take sms itself so if you receive sms you back to outlook..
did any one see palm threaded od wm6 update of treo? any changes?
bowlopho said:
well the txt is built into the pocketcm app, which makes it suck. It's a great tool, but there is no quick way to text. You have to manually open up the contact, select sms, then wait for it to load up. If you close pocketcm, and receive a message, it doesnt open in pocket cm unless u manually open it.
I had a problem with the palm threader, where my gf kept getting double text from me. I just uninstalled it and it removed itself and went back to normal arcsoft mms manager thing.
Click to expand...
Click to collapse
i also have been using palm threader for...at least 5 months...i had your problem one time to...from my experince i found (at least for me) that this problem was caused by programs like the htc x button..that i would send a sms it would get sent and like always i would close the app...well the app not knowing if it was sent or no bc it got closed would send it again....the way i easlly solved this was by using the new version of htc x button and making the palm threader an exclusive app. this would make it where it would never close, from this it ran faster and i never had that issue again
double post...
well maybe someone will try this? http://www.mykesoft.com/textr/details.php (im currently trying to try ) and this looks like be better than palms app but ive got problems that may be caused by my config. i'll try to do hardreset later..
slimag said:
well maybe someone will try this? http://www.mykesoft.com/textr/details.php (im currently trying to try ) and this looks like be better than palms app but ive got problems that may be caused by my config. i'll try to do hardreset later..
Click to expand...
Click to collapse
I have tried textr and have found that the functionality is great but the program has a large memory footprint and takes a while to load. It also does not take the place of the default sms application from what I understand but then again, I am also using sms threader and not the default sms app.
Here is a direct download for the the texr application with all required files for the program to work properly and MY PERSONAL registration key that I am sharing with the community because the trial period expires as soon as it is installed, not 21 days later like it says on their official site.
If anyone can find a way to decrease the memory footprint and also make it the default sms app and load more quickly, please let me know because I like the program, I'm just a speed freak and the app just runs too slowly...
EDIT:: Attachments removed for legal reasons. Just shoot me an e-mail if you are interested(just click my username and click send email)
as the original guy to post this thread..
i have to say even tho the PocketCM looks very nice.. it more of a pain to actually use it for txting and that whenever u get a new txt it wont show up. u have to close the program down and start it up to see ur txt.
and i am currently using palm sms threader and i love it's awesome.. so easy to txt. one slight problem that i am having with it is that i cant recieve or send picture messages but i can still open up the old messages program for that. it could be just me tho..
and this textr.. even tho i havent used it looks very similar to palm sms threader but a little newer. but the memory thing.. isnt for me. if that's the case..
for now im sticking to palm sms threader.. very easy to use program..
yeap i know now why you all say that (oh my english is even worser when i'm tired)
after try - loading time of textr and the memory... i think nobody can say this is better than palm app.. however looks very nice and im disipointed
smileyaj2005 said:
as the original guy to post this thread..
i have to say even tho the PocketCM looks very nice.. it more of a pain to actually use it for txting and that whenever u get a new txt it wont show up. u have to close the program down and start it up to see ur txt.
and i am currently using palm sms threader and i love it's awesome.. so easy to txt. one slight problem that i am having with it is that i cant recieve or send picture messages but i can still open up the old messages program for that. it could be just me tho..
and this textr.. even tho i havent used it looks very similar to palm sms threader but a little newer. but the memory thing.. isnt for me. if that's the case..
for now im sticking to palm sms threader.. very easy to use program..
Click to expand...
Click to collapse
your problem is universal...no has ever been able to use the MMS feature of the Palm Threader. when i cook my own roms or use thoughs of the chefs i use the new version of Arcsoft sms which has the sms and mms separate...so after u install that and the palm threader u have 2 separate program one for sms and one for sms works awesome.....sorry i do not have the cab for arcsoft mms...tho i do have the OEM if want it.
the reason i put palm threader into my own rom instead of just installing the cab is if find it makes the program ALOT faster...with the cab version the program would seem to slow down after a while...cheers to all
jug6ernaut said:
the reason i put palm threader into my own rom instead of just installing the cab is if find it makes the program ALOT faster...with the cab version the program would seem to slow down after a while...cheers to all
Click to expand...
Click to collapse
hmm is that rom public? i currently doesnt have time to cook my own and nobody else using palm app..
Probably will work for you as well,
(Using MW6.1 19174 build DarkForce (Thank you mwang for posting this ROM))
If you still remember, the first time we used WM 6.0, the old PIM (from WM 5) cannot be used in the new version, we have to sync the contacts (not thru back-up) to be able to use our UNI. Same thing in this new version (I supposed), you have to manually enter the appointments in the calendar on-by-one.
This is what I did...
1st: From my Back-up (I used PIMBackup (thanks to the creator)) I restore only the contacts.
Check if the SnapVue problem is there (lucky for me SnapVue is still working properly).
2nd: I restore my Task, Hmmmm, SnapVue is hannging Hmmmm... I then checked my tasks, a lot of duplicates is there. Every time I remove the duplicates (one-by-one) the performance is getting better and better until it returns to normal performance.
3rd: I didn't restore my appointment (Calendar Entry), I enter my appointments one-by-one to avoid duplicates (B-Day, Aniv, Holidays etc.).
4th: Restore messages, Speed Dial, Call Logs
For 2 days of observation, no SoftReset, no hannging, Phone Functionality is perfect, all HWButtons are working...
Though no Video Call as expected, this ROM is perfect....
P.S. The Wi-Fi toggle (On/Off) beside the signal is now working.
Next action will be to Backup everything then Restore after HardReset... (maybe later)
WiFi ON/OFF
Excellent Rom
I love the speed and the stability, but i have not been able to use the wifi on off, I click it but nothing happens, any sugestions, I have reinstalled the rom if that would have been an sugestion, so any help would be kool.
OS: ROM: WM 6.1
O2 XDA EXEC
Storage: 4GB
Where can I get the cab or instalation of snapvue???
rilazi said:
Where can I get the cab or instalation of snapvue???
Click to expand...
Click to collapse
Not cab exactly.....but here you go!
http://rapidshare.com/files/90044713/SnapVUE.rar.html
rmercado said:
.......... 3rd: I didn't restore my appointment (Calendar Entry), I enter my appointments one-by-one to avoid duplicates (B-Day, Aniv, Holidays etc.)
Click to expand...
Click to collapse
Hi 'kabayan',
I'm curious if the 4-5 sec system pauses is really gone after the manual entry of appointments. In my case, after 10 manual appointment/recurring event entries the device starts pausing for 4 to 5 secs once again. Pls. see my post here. I'm currently running with SnapVUE active but with less than 10 appointment entries only! Please confirm that the pause/delay is really gone after manual entry.
I would agree that the ROM is rock solid - stable although some minor problem with activating WiFi & connecting to WPA-PSK setup. Mail setup via SnapVUE is also working alright here contrary to what others are experiencing!
Hi Kabayan...
Ganon....
My appointments are more than that cause I am using CallCalendar. All call transactions are recorded in my calendar. My friends, relative's (even biyanan's) birthday are recorded in my Calendar.
I restored all my important messages since last year.
Try mo to...
restore only Contacts, Messages call logs (if any), speed dials (if any). You can restore tasks as well but make sure you don't have duplicate entry. (i am using pim backup)
Try to enter the appointments one-by-one.
I assume that the old appointment's structure is slightly different in the new version which is causing hang-ups.
all the above assumptions are based on what I did in my device.
I assure you as well that the wi-fi toggle (on/off) is working in my device but i'm no wi-fi expert I dont know if I am using WPA-PSK or whatever.
I tick my Turn on Wi-Fi toggle to ON then device will scan, then ask me if I want to connect, if I click connect then WEP Key will be asked. Paste it then connect.
If i want to close, tick the toggle, click Turn off Wi-Fi... thats it..
I didn't install any tweaks, I only installed psShutXP, TCPMP & TCPMP Plugins
rmercado said:
Probably will work for you as well,
(Using MW6.1 19174 build DarkForce (Thank you mwang for posting this ROM))
If you still remember, the first time we used WM 6.0, the old PIM (from WM 5) cannot be used in the new version, we have to sync the contacts (not thru back-up) to be able to use our UNI. Same thing in this new version (I supposed), you have to manually enter the appointments in the calendar on-by-one.
This is what I did...
1st: From my Back-up (I used PIMBackup (thanks to the creator)) I restore only the contacts.
Check if the SnapVue problem is there (lucky for me SnapVue is still working properly).
2nd: I restore my Task, Hmmmm, SnapVue is hannging Hmmmm... I then checked my tasks, a lot of duplicates is there. Every time I remove the duplicates (one-by-one) the performance is getting better and better until it returns to normal performance.
3rd: I didn't restore my appointment (Calendar Entry), I enter my appointments one-by-one to avoid duplicates (B-Day, Aniv, Holidays etc.).
4th: Restore messages, Speed Dial, Call Logs
For 2 days of observation, no SoftReset, no hannging, Phone Functionality is perfect, all HWButtons are working...
Though no Video Call as expected, this ROM is perfect....
P.S. The Wi-Fi toggle (On/Off) beside the signal is now working.
Next action will be to Backup everything then Restore after HardReset... (maybe later)
Click to expand...
Click to collapse
Thanks rmercado your trip , I am working with new version which will be new OEM and without SnapVue , as I said before SnapVue just beta and very buggy,but someone said like it in here that's why we made it,
mwang said:
Thanks rmercado your trip , I am working with new version which will be new OEM and without SnapVue , as I said before SnapVue just beta and very buggy,but someone said like it in here that's why we made it,
Click to expand...
Click to collapse
Hi mwang,
Thanks for the latest & wonderful WM6.1 ROM!
SnapVUE is alright for some of us like rmercado & dreamtheater39. We have gotten away with the pause by our own means. I hope you can provide a separate build for us, SnapVUE lovers! A flash disk would be great too!
catch-22 said:
Hi mwang,
Thanks for the latest & wonderful WM6.1 ROM!
SnapVUE is alright for some of us like rmercado & dreamtheater39. We have gotten away with the pause by our own means. I hope you can provide a separate build for us, SnapVUE lovers! A flash disk would be great too!
Click to expand...
Click to collapse
YOU GOT THAT BUT IF YOU SEE NEW ROM THAN YOU WILL FORGET SNAPVUE
mwang said:
YOU GOT THAT BUT IF YOU SEE NEW ROM THAN YOU WILL FORGET SNAPVUE
Click to expand...
Click to collapse
Come on, a new WM6.1 ROM with a better today plugin than SnapVue?
SnapVue is good already & you have something better? Great!
Well, I always have high regards for DFT ROM's specially the last WM6.1 build. If you are releasing something that soon, I guess you really have something GREAT!
Looking forward to that, at the moment enjoying SnapVue & this crash-less WM6.1 build of yours!!!
I trust you...
Hmmmm...
Knowing MWANG... ' always have something new...
Surprise us.... Hehehehehe.
Thanks...
I hope mwang will post a screenshot
DFT New ROM
mwang said:
Thanks rmercado your trip , I am working with new version which will be new OEM and without SnapVue , as I said before SnapVue just beta and very buggy,but someone said like it in here that's why we made it,
Click to expand...
Click to collapse
Hi Mwang,
Any news on your new upcoming release??
mwang said:
YOU GOT THAT BUT IF YOU SEE NEW ROM THAN YOU WILL FORGET SNAPVUE
Click to expand...
Click to collapse
How is the new ROM coming along?
mwang said:
YOU GOT THAT BUT IF YOU SEE NEW ROM THAN YOU WILL FORGET SNAPVUE
Click to expand...
Click to collapse
Still no new ROM?
best way to fix SnapVue ..... delete it ..... from rom ..... from life ..... etc .. exremely huge and buggy app ... with crappy functionality ... best place in trash can
toch flo - funny app ... they cant be compare with iphones interface .... just a huge and buggy app with low functionalyty and huge memory consuption ... really dunno why all wanna ave this .. maybe becose people have huge amount of free ram ... and they wanna some bugs on his ass
what do i do with files
Hi,
I've downloaded the SnapVue files from rapidshare as per directed- however what do i do with the files once on extracted on my pc????
thanks in advance.
Guys,
I need your help. My HTC Touch HD cannot initiate the TouchFlo (3D), and I cannot view it the way it should be at all. I don't know what happened but it just doe sthe following when you restart it:
It will go to the TouchFlo (3D) Page and the message saying "Tap Here to Launch TouchFlo (3D)
I tap and it keeps saying Launching TouchFlo (3D) but it never does that
I can access the mobile from the Start Menu but I want my Touch HD Back to the way it was before.
Anybody has any suggestions please post them or email me at: [email protected]
thank you guys
Yaser
Save PIM data (ex with PimBackUp or similar) then make an HardReset: HD off, Hold VolUp+VolDown then one click on PowerOn Botton.
D'rath
PS: The process erases all your data but solve the SW problems
Wait, hard reset is the last solution!
Have you installed an application or any graphics drivers? New rom?
If so then you could try to uninstall it and see if the problem is solved!
Sometimes I had this when installing bad drivers.
You could try to install these drivers. (at least before doing a hard reset)
helio is correct,
HR is the last resort (although it will of course fix the problem) as you wont understand what has caused the underlying problem, you will then install the same software/apps and end up with the same issue.
Look at what you have have installed recently, or changed manila files. An incorrect change if playing with a manila file will cause touchflo not to start.
Thanks Guys for your Comments and Recommendations, I really appreciate that,
I need to know how to Backup the PIM Data. I found a file with pim next to it and I already saved it on the Storage Card. Is there any other PIM File(s)? I also listened to you onnot doing the Hard Reset, and removed every software I have doubt about or had installed recently. But the problem still presists, TouchFlo (3D) Cannot launch. Help and thanks again.
Use this app, zip below, to back up your data (emails, contacts etc). The app is simple to use. Word of warning if you use Exchange to sync email and contacts, be CAREFUL....restoring your contacts and then syncing will duplicate all your contact entries (i know because i did it and ended up with 2000 contacts!!!)
You dont say what you had installed, just that you had removed them. Purely unistalling may not fix the issue if a registry change has not reversed.
Have you been playing with any manila files, or deleting anything you shouldnt be? Have you been playing with the registry?
If you really cant analize what you have done and without much more info, you have to decide if the HR is the only available option to you (ie you want the quick fix).
Dear Timmymarsh,
thank you for all you've done for me, I really appreciate that. I am sorry I did not mention what I did. What I have done is try a new ROM, I think it Was WWE but which one I don't remember. I downloaded a bunch of files from this site, thinking they would work without testing them first. But they did not turn out to be what I was looking for. I downloaded the Choco Clock, Sygic GPS, and others from the Manila....and other developers but when I unzipped and installed them they did not work for some reason. So I just deleted them, the thing is I know I should have uninstalled them first. But for some reason I just can't even find the files created by these add-ons or applications. No, I did not touch the registry at all. I am not a Software Man, obviously you guys are amazing in this stuff, I am more into infrastructure if you have any uestions about Wireless Network or Physical Security let me know. I am trying to learn more about this Mobile and want to be able to utilize it to the fullest. Thank you again. For this time I think I am going with the HR so I can erase everything that I downloaded and did not setup Properly, then I am going to install only trusted add-ons and softwares. thanks.
No probs my friend, its what we are here for yes
As for what you have done, its always best to uninstall first, just deleting causing reg problems hence the issues you are now facing. I would say on this occasion HR is your best bet. Best bit of advise i can give you is, install one app/software, test and if there are no compatability issues then add another, if there is then at least you know to safely remove by unistalling that app.
Have fun, the HD is a brilliant bit of kit and can be expanded/modded vastly
flashing error
hey guys i just every time i have tried to update my rom (cooked) it has always given me the error 240 FILE OPEN- this is really annoying and have tried alot to fix it, any ideas?
I followed this guy known as widget kid on youtube who did a run through and it still doesnt work, i just updated to 1.56 olinex Hspl which fixed my grpahical problems but still doesnt support me flashing other roms such as miri or energy pheonix!
HELP!
regards JP
Jpradella said:
hey guys i just every time i have tried to update my rom (cooked) it has always given me the error 240 FILE OPEN- this is really annoying and have tried alot to fix it, any ideas?
I followed this guy known as widget kid on youtube who did a run through and it still doesnt work, i just updated to 1.56 olinex Hspl which fixed my grpahical problems but still doesnt support me flashing other roms such as miri or energy pheonix!
HELP!
regards JP
Click to expand...
Click to collapse
JP this is a little off topic, but have you followed the many good guides in the blackstone forum and where are you running the ruu from, make sure its on the root drive not in many folders. You using XP?
PM me please once you have read this and i will delete this post to keep thread clean.
HI can anyone tell me where to get new skype from 2.07 rom ???
thanks in advance.
You won't find anyone with it here. The best solution is to simply flash to a ROM that has it.
I have so much data on phone can't backup all of it so dont wana change rom for time being........
Im not sure where to grab the version of swype that has been extracted from the 2.07 rom... i am trying to find it myself!
The swype cab created from the version ripped from the Samsung Omnia 2 is all over the web though... google should bring up a couple of places to download it from.
Does anyone know of any differences between the two versions?
Audio Oblivion said:
Im not sure where to grab the version of swype that has been extracted from the 2.07 rom... i am trying to find it myself!
The swype cab created from the version ripped from the Samsung Omnia 2 is all over the web though... google should bring up a couple of places to download it from.
Does anyone know of any differences between the two versions?
Click to expand...
Click to collapse
You will have to search in the underground... Extracting the software and offering it as a cab is clearly not wanted by the creators and owners of the software. Offering links to warez is completely against xda rules.
The difference between the 2 might be some more language support, and that the HD2 version was made for HD2, as simple as that. I think it still might be an option to flash a ROM which carries it on board - or, at least, as long as this is tolerated.
Maybe in the close future, HTC will bring another ROM update which offers this great piece of software. Or, as stated otherwise, Swype might decide to make a retail offer at some time. If they do at a decent price, I believe they could do great business - as seen with other products, at unreasonably high prices, you won´t sell big, but at fair pricing, you can succeed.
I cannot find the new version anywhere!
If anyone has a link or would like to email it to me that would be very much appreciated!!
Karlos G said:
I cannot find the new version anywhere!
If anyone has a link or would like to email it to me that would be very much appreciated!!
Click to expand...
Click to collapse
pocketnow.com has written a nice article about it. Read it
i downloaded new version from pockernow article. noted some minor improvements.....
Karlos G said:
I cannot find the new version anywhere!
If anyone has a link or would like to email it to me that would be very much appreciated!!
Click to expand...
Click to collapse
Are u refering to version 3.9?. I installed that and it reset my email pwds
Cheers!
It's also here http://forum.xda-developers.com/showthread.php?p=5679513
Hmm I get an error saying "Cannot Open English File" when Swype starts up anyone else having this?
kivine said:
Are u refering to version 3.9?. I installed that and it reset my email pwds
Click to expand...
Click to collapse
I had the same thing, only installed yesterday so didn't do much checking of the phone. Quite a few problem were caused by the T-Mobile version . Data connection is screwed and all email passwords needed to be reset and my Wifi password are also gone lol. Did some reading online as well and quite a few other people have experienced the same problems, some have even had to HARD RESET to get their phones working correctly, fortunetly for me just uninstalling the CAB and giving the phone a few minutes resolved my Data connection issues , will put back on the Omnia version and leave it at that for the time being.
So I advice using the newest version of Swype with EXTREME caution!!!!
I tried it after much hesitation... Had to do a new setup for all email accounts, data connection and wifi connection. But it seems to be fine now, I'll see in a few days if it stays like that.
I'm using SWYPE WVGA 3.9.10.10.5032 on my HD2 without any problems.
xavierdemon said:
I had the same thing, only installed yesterday so didn't do much checking of the phone. Quite a few problem were caused by the T-Mobile version . Data connection is screwed and all email passwords needed to be reset and my Wifi password are also gone lol. Did some reading online as well and quite a few other people have experienced the same problems, some have even had to HARD RESET to get their phones working correctly, fortunetly for me just uninstalling the CAB and giving the phone a few minutes resolved my Data connection issues , will put back on the Omnia version and leave it at that for the time being.
So I advice using the newest version of Swype with EXTREME caution!!!!
Click to expand...
Click to collapse
Had the same, but all I had to do was re-enter the passwords (and mail servers for gmail) and re-run the connection setup wizard. Now I'm fine and dandy and the software is nothing short of awesome... Supports Italian, German, French, English and Spanish; I tested all languages and it works fine
I'd say it is a crucial addition to the HD2, as I use it every day, and it makes my text input much less of a chore. It is particularly useful because of its multi-language support. I've never had any problems like those described, thankfully.
have you guys done any soft resets since the initial reset after installation? I also found the keyboard became slow to start after I played with the setting. the omnia 2 version is working better for me and with the htc skin looks awesome.
READ THIS BEFORE INSTALING THE NEW SWYPE! (v3.9)
Original Post
http://forum.ppcgeeks.com/showpost.php?p=1578221&postcount=50
PPCGeeks User said:
I can't believe no one else posted this...
If you overwrite the ModelID with the file provided, you are effectively telling your phone that you are now....a...tmobile hd2.
The swype keyboard has protection in it...only a tmobile hd2 will work with it.
hence why you need the modelid
now here is the kicker...
Say sprint - you run sprint tv. get an error. wanna know why? sprint asks "what phone" and your phone replies "tmobilehd2.
Same thing with prl updates...
I think you get the point...
when you overwrite the modelid, all exchange accounts - gone (sorta). Your 4 digit pin become a lockout - no pin will unlock it.
in short, bad things happen.
And this is why you always provision your phone before you set it up. part of provisioning is setting the modelid...
which is why people on mighty that forgot to provision before seting up exchange need that fix e-mails cab...
any questions?
Click to expand...
Click to collapse
@leepriestenator, if I don't use any provider software, I can install swype without any problem right ?
leepriestenator is correct. Thanks. As our phones are all unlock where we are, the problem is just resetting the mobile provider. It is working fine on my phone, though the phone identity is now T-mobile_Leo.
Having said that, it is a much improved version over the one in Samsung.
Can someone try this windowsmobile7series theme. want to know if it works oh and when you are downloading make sure to save it the files that have a c in the beginning of it to your main memory The file you should have on there first is chomeconfiguration and mortscript4.2 on your phone that you will install the titanuimpanel that you would stat installing the files that have a c in the beginning of it.
You will need WM6.5 on your phone for this to work.
w
plz leave feedback
pic of it
here are pics of it
Not work in b7320
Not work in b7320
instruction
pleas can you give us instruction to install steb by steb
thank you
why are you calling this a theme? you've just grabbed a bunch of other peoples work (.cabs) and installed them on you phone...
and you need Window Mobile 6.5 for almost all of these to work.
hh
what im tired this all im trying to do is make somthing for us that uses wm7 but its a titanuim plus the orignal one doest have that much on it .thats why i descided to put all these plugins into one file so you dont have to go download one by one and other noncence
wm
plus is intructions but you will have find my other threads by going to my profile and searching them plus i making this thing that changes your startmenu and making the xboxlive plugin for it to just for this theme so far i just add cool stuff to it to make it better like this other guy who made this nice plugin cant remember his name oh ya im making this thing that make your pic work like work in the background or like to call it shuffle it but its on the homescreen like the windowsmobile7 model thats coming out
need 6.5 and mortscript
dermann said:
why are you calling this a theme? you've just grabbed a bunch of other peoples work (.cabs) and installed them on you phone...
and you need Window Mobile 6.5 for almost all of these to work.
Click to expand...
Click to collapse
of course it needs the 6.5 stuff to work right on your phone .just use those cook roms u all be using
julian2596 said:
can someone try this windowsmobile7series theme i made. want to know if it works oh and when you are downloading make sure to save it the files that have a c in the beginning of it to your main memory The file you should have on there first is chomeconfiguration and mortscript4.2 on your phone that you will install the titanuimpanel that you would stat installing the files that have a c in the beginning of it.
Click to expand...
Click to collapse
julian2596 said:
what im tired this all im trying to do is make somthing for us that uses wm7 but its a titanuim plus the orignal one doest have that much on it .thats why i descided to put all these plugins into one file so you dont have to go download one by one and other noncence
Click to expand...
Click to collapse
if you want to find things that work on 6.5 and put them here for new members (noobs) so they don't have to look, then that's fine. but don't claim that you made them. all you can claim is that your using them on your phone and using some of their components for your upcoming windows phone 7 theme. give more information so that people know what version of windows mobile they need, what they're installing (the more info you write, the less questions people have and less upset people will get). keep in mind that a lot of people are still using windows mobile 6.1, the titanium cabs won't work on wm6.1, so if people install them they'll have to hard reset after words to get their phones back to the way it was, i know this from first hand experience and give some credit to the people that did make the .cabs your putting here.
dfd
ok i would next time
sh
some these works for standard phones and professional phones to the plugins
wierd but cool
the weird things is that mostly all those plug ins are for windowsmobile professional devices but my phone can run all types of touch screen apps or themes to it. Thats weird.that could be another reason the files are not working properly for other phones including not have the 6.5rom on it.The thing i manage to get on my device that i think was a windowstouch theme was that titanium wm7 theme that i found for touchscreen devices .for right now im really trying to get raxbot creation or lessco creation of the windowsmobile7 series app to work on my phone .the good thing it lets me in the app but the functions of the arrows dont work properly.But i had found this app that gives your phone a mouse cursor pointer just like your computer haves to navigate around the screen and this was another touchscreen app that manage to work on my phone i only have 1 problem with it that im try to figure out im using it for Jaxbot wm7 app and maybe going to use it on lessco to.that is all for now
oh and ya im going to fix it the other theme so it will work properly and just work for other devices and ya xboxlive would be coming and some other neat features would be coming that windowsmobile7series going to have to. I would be having people work on this with me to make it happen and to see would it be possible to work on standard devices if you want to get on this project just replied to this or just message me and the people that will help would get credit for making this. and name will be on my youtube account for hundreds of people to see who creates apps and themes for windowsmobile and people who just like it
Thanks, worked great on my Moto Q9h
cool
it works on your phone now
fv
what are you doing to make it work because dont know why its not working for others. wait are you usin the individual files or u using the one that have everything built in one file
new update coming next month and the whole interface is totally been change with better graphics
julian2596 said:
new update coming next month and the whole interface is totally been change with better graphics
Click to expand...
Click to collapse
Hi Julian this is excelent Thanks
i have a i637 Jack....
Do you have more things for this phone?
Thanks thanks thanks