I'm still looking for a good dual SIM solution to use with 3+Vodafone in Italy
3 is an only digital (3G/UMTS) provider and my personal carrier (I use it for internet and data transfer) while Vodafone is my company provider and don't need to use any digital content
anybody has any advice/news ?
Thanks
Hi carlo626,
I know, old thread, but: do you have found a working DualSIM Card? I tried three several cards (1 analog card, 1 digital card, old version, 1 digital card newer version) and no one of them work in my trinity. By all I get the error "no SIMcard inserted". I am looking for an working DualSIM too. Any advice?
Related
Since my SEARCH did not yield any result, here is a description of the problem my TC exhibits:
I use "Alice Hansenet" as a mobile provider (it actually uses the O2 network in Germany). When I install the SIM-card in another phone (Nokia 6210), it shows the network name as "Alice". But on the TC is hows the name as "AvzÖù".
I tried another card (E-Plus) and it shows up correctly on the TC. When I tried the SIMcard in my old TyTN, it worked fine.
The TC is fully functional with the SIMcard, only the displayed Network ID is screwed up.
I have spoken with Hansenet, O2 and HTC and everyone tells me that it's not their fault (HTC says they've tried a variety of cards and only display the network ID off the SIMcard, O2 says I need to talk to Hansenet, Hansenet says that they are not aware of any issue and that the card seems to work fine).
Since this TC works fine (it's a replacement because the first one had lousy reception), and because I have activated TomTom & maps, I do not want to install any cooked ROMs (quite yet ), just to see if that helps.
Has anyone else seen this type of issue ?
Are there any tips on what to try next ?
Regards,
Andreas
I think its TC ROM error - database of mobile providers is corrupted....
Phone reads from SIM network code - e.g. 23001 and from database reads 23001=T-mobile and write this value on display....
Petulinek said:
Phone reads from SIM network code - e.g. 23001 and from database reads 23001=T-mobile and write this value on display....
Click to expand...
Click to collapse
Thanks for the reply ...
Is there any way (for a mortal such as myself) to check this ?
Cheers,
AC
I just got a response back from HTC and they told me that they see this with ALICE cards in different units (MDAs, Cruise, TyTN2, Advantage). According to them it is "only a registry issue", but can't be changed unless you go back to WM5
Not sure I understand why this should be, but there you go ....
They also said that they would escalate this to Microsoft and Alice Hansenet if "more and more keep turning up" ... so basically, if a large enough group of users complain ...
I don't understand why the only solution is supposed to go back to WM5 ... this seems a ridiculous answer.
Cheers,
Andreas
I know it's an old thread, but maybe this will help some others (which used Google to come here):
Try this tiny app to change your network operator name manually:
http://www.freewarepocketpc.net/ppc-download-opmon.html
Works fine for me.
It seems that even single SIM XT1650-03 comes with a double SIM tray if I don't go wrong...
(even if I don't know if with "hybrid" double sim/single sim+microSD or a full double sim+microSD tray...)
Anyway I guessed that in some way they could probably be enabled to full double sim by software since of a great software compatibilty between models showed by first tests...
Then I found this Moto X thread: http://forum.xda-developers.com/moto-x-play/help/enabling-dual-sim-single-sim-devices-t3225546 which seems to confirm my idea...
I don't see any good reason this shouldn't work for Moto Z too... :fingers-crossed:
It must only have to be tested/confirmed...
Only problem is that second SIM would work without a valid IMEI and this could block network access on some carriers... BUT on Play Store there are various IMEI changer apps which could be usefull to fix this issue (to be tested too...).
Any contribute to these tests will be welcome...
take a look at this: https://forum.xda-developers.com/moto-z/how-to/guide-to-enable-dualsim-singlesim-t3594529
works fine on my German XT1650-03
Hello everybody!
I'm a user of Lenovo A536, and soon i decided to customize it. So i wanted firstly to install fresh version of stock. My phone is single SIM version, and after few hours of googling it looks like there is not singe SIM version firmware available for download. I tried about 5 different versions(last digits of releases):
*910
*725
*141115
*813
and maybe one more... And all is Dual-SIM.
After installing DS Stock ROM, everything seems OK, but, there is network issue. I'm available to use just GSM(2G) networks. My default SIM is SIM 2, not SIM 1 where WCDMA(3G) is setted by default. (Why is this really important to me: most of a day, i'm not at home, so slow network is like i don't have it. ) In SIM Managment there is no another SIM. Just SIM 2, and when i click on it, there is two options, SIM 2 and "off".
What have i tried more:
CODES
I have tried to dial *#*#4636#*#* but, i got two phone infos(Phone info 1 and Phone info 2) and "radio off" is not working as changing mode, on both of it.
Build.prop
I have looked what is seeking there... I saw option something like "...active.sim..." and it has value of 2, and i set that to 1, but that caused bootloop after rebooting....
APPS
I have downloaded some SIM Managers and try to enable/disable SIM 1, and to set 3G to SIM 2, but that was unsuccessful also.
Is there any way to change some system file which contains these settings, to disable one SIM, or just to change SIM 2 to SIM 1?
Or can you find correct singe SIM ROM?
I'm currently on MIUI 8.
Thanks to everyone for attention.
(I'm sorry to MODS if i have posted this thread on wrong place, or named it incorrectly)
Currently on Oreo...
I recall reading somewhere a change has been implemented in Pie with respect to Travel Sim use; it is now necessary to re-flash a new rom before new travel sim card can be used in a different country, is that correct?
Anyone know what the process is with respect to getting a pie flashed phone working with a new destination country sim card?
Hello,
So trying to continue to troubleshoot my original ticket "Unable to Make Calls", I decided to browse through the hidden menu via ShorcutMaster to see if I can make changes to the network and hope for a resolution.
Anyways, I ran into the Qualcomm QMMI Diagnostics App which checks the sensors, network capabilities, Backlight and such. One interesting thing I noticed when playing with the menu was the option to check for Sim Card 1 \ Sim card 2. On a hardware level, they both check out. But in the settings to test "Tel SimCard1 \ Tel SimCard2", I was able to get the Tel Sim 1 working by dialing out (hardware confirm) and when selecting TelSim2, the message "Sim Card is Disabled". (Just for note, the Humidity Sensor Check came back as "Not Supported").
Also note, when looking for Network changes to be made, the menu option for "DualSim" is available but hidden as well.
So is it possible later on when we get the Cross flash thing working, is it possible to cross flash the Dual Sim Firmware and hopes to have both enabled?
Please poke around to see what else there is.
Cant get the pics to uploads, so check it out here:
https://ibb.co/rZCM1rJ
https://ibb.co/bF62Tpr
https://ibb.co/173Sq79
Have you tried loading 2 SIMs and seeing what happens?
No because it shows disabled via hardware. But really, it's because I don't think people sell the dual SIM slot part for V50.
joeminati said:
No because it shows disabled via hardware. But really, it's because I don't think people sell the dual SIM slot part for V50.
Click to expand...
Click to collapse
Maybe this will fit. It's from the V40
Replacement SIM Card Tray Slot Holder for LG V40 ThinQ / V40 V405UA Black https://www.amazon.com/dp/B07WRQJT5V/ref=cm_sw_r_cp_apa_i_eGgXDbJANV5N5