Related
Hello,
I was wondering if there is a possibility to know when a call is forwarded to me. For example on Nokia phones there is a sign ">" before the number of caller, and by that I always knew when a call was forwarded to me. Is it possible to do something like this on WM5 ?? I think it would be universal to all WM5 equipped pocketPCs with phone, but if not I'm using TyTN.
Thanks in advance for any suggestions
As my subject says, does anyone know where in the registry I should look to fix this? I have been uninstalling and reinstalling S2U2 since about version 0.72 or so and been using it's callerID function as well. So maybe between all the reinstalls somehow my registry has been corrupted? I noticed recently my call pickup and ignore wasn't working in S2U2 caller ID and thought it might be an S2U2 problem. But I uninstalled S2U2 and when I click Answer or Ignore from the WM6 default callerID, it does nothing! It highlights the button as if I were pressing it, but doesn't do anything. Can anyone help guide me for where I should look in the registry? Or any other advice? I have an HTC P4000 (Canadian CDMA Titan) with the carrier (Telus) default ROM of WM6 that it came with.
brockmo said:
As my subject says, does anyone know where in the registry I should look to fix this? I have been uninstalling and reinstalling S2U2 since about version 0.72 or so and been using it's callerID function as well. So maybe between all the reinstalls somehow my registry has been corrupted? I noticed recently my call pickup and ignore wasn't working in S2U2 caller ID and thought it might be an S2U2 problem. But I uninstalled S2U2 and when I click Answer or Ignore from the WM6 default callerID, it does nothing! It highlights the button as if I were pressing it, but doesn't do anything. Can anyone help guide me for where I should look in the registry? Or any other advice? I have an HTC P4000 (Canadian CDMA Titan) with the carrier (Telus) default ROM of WM6 that it came with.
Click to expand...
Click to collapse
Brockmo,
When this happens do you have a current connection via EvDO active or dormant? Are you in EvDO coverage or 1X. I have similar problems too with and without S2U2. I have had better luck with 2.17 OS and 1.47.01 radio, if I press the hard talk key several times it will pickup, I found disabling constant evdo connection definately helps. Blackberry is still the ultimate push solution, WM6 is ok, but there is definate issues with prioritizing Voice over Data. Voice should be the #1 priority over any thing else.
Is there any possibility to get MSVC working on Diamond 2? I used it on my old O2 XDA Orbit 2 with Bepes Rom. Now I'm interested in to use it on my Diamond 2, or should I wait for official Update on Windows Mobile 6.5 with "TellMe" ?
I managed it, but it does not work and caused a problems (i.e. once connected to BT, it always stays connected).
Working fine on mine through bluetooth, I'm using V1.6.19214 found in a link here on XDA. I don't bother with the call button activation, which can be problematic to get working, as I only need it for voice dialling through my BT headset.
hmm, okay... thanks for the reply...
i just wanted to use it for incoming calls, so that the callers name is outspoken and for simplyfying writing sms...
I think i will wait for "tellme" in wm6.5
THX guys
eatmyshorts said:
hmm, okay... thanks for the reply...
i just wanted to use it for incoming calls, so that the callers name is outspoken and for simplyfying writing sms...
I think i will wait for "tellme" in wm6.5
THX guys
Click to expand...
Click to collapse
Hi,
I've voice command 1.6 in french, and it works nearly amazing fine. I'm not using bluetooth with it, and the only problem is that, sometimes, when I ask 'CALL ... AT HOME', it asks for confirmation, and it does not understand the 'YES' answer. This problem did not happen with version 1.5.
I also disables incoming caller names, because it has a conflict with the ring, and both are not audible (ring distorded, and voice not understandable).
But it tells you the meetings, mails, battery status, next appointements, etc...
Really amazing on a small device. I don't use contacts mamangers anymore for calling : just using voice command. I even work in the car, with the ambiant sound engine, and radio on (not too loud!). Worth the price for 19.95$ (as far as I remember).
regards,
Olivier.
PS: it fails on install because it has not enough hardware button. After install, go in the settings -> buttons and assing it to the only button. Pressing Green key for two seconds, and wait the the beep and microphone icon on notify bar. If you press the button too long, it makes a loud beep to tell you it is cancelled. You can also magic button, or remap the soft keys.
I used to use Cyberon Voice Commander to make a call. I have no idea how come HTC took off this software on Diamond 2...
I have sent the email to Cyberon to ask if there is any possible way to get their Voice Commander. They responded that the software now has retail version for about 10 languages, and they offer the full function 30-day trial on their website. I am using it so far. It works well on my Diamond 2.
Vito
Vito technology has 2 voice command apps. VoiceDialer to simlpy call some1 and Voice2Go to launch apps and cpntacts and so on.
How come there is just one button to assign something to? I would like to use cyberon voice commander via the headphone mic-button.. is there a way to do this, or is it a limitation in td2?
broman.m said:
How come there is just one button to assign something to? I would like to use cyberon voice commander via the headphone mic-button.. is there a way to do this, or is it a limitation in td2?
Click to expand...
Click to collapse
Try the latest version of Cyberon Voice Commander v2.5.2r from Cyberon website http://www.cyberon.com.tw/order_Product_con.php?NO100=15 as Lacerta mentioned .
This version provides "hold Volume-up" or "hold Volume-down" to launch CVC in Setting, as well as you can start it by pressing the button on BT earset.
Per xhaavardx, I downloaded the app from Vito Technology. Works great in the office. Totally useless driving down the road. And I do mean totally. Will not successfully dial a single voice tag I recorded in the parking lot unless I pull off the road and turn off all accessories, even the heater fan.
There was a post on this site somewhere recently stating that someone had converted the app from the old HTC Wizard into a .cab that could be installed on the diamond 2. I can't seem to search that thread out, though. Can any of you guys find it? That thing worked absolutely great!
mboessen said:
Per xhaavardx, I downloaded the app from Vito Technology. Works great in the office. Totally useless driving down the road. And I do mean totally. Will not successfully dial a single voice tag I recorded in the parking lot unless I pull off the road and turn off all accessories, even the heater fan.
There was a post on this site somewhere recently stating that someone had converted the app from the old HTC Wizard into a .cab that could be installed on the diamond 2. I can't seem to search that thread out, though. Can any of you guys find it? That thing worked absolutely great!
Click to expand...
Click to collapse
This one was ripped from Samsung but haven't tested it.
Tried a text but no luck so far. Will keep trying.
Also, MSVC is working great.
Bruce Inman said:
This one was ripped from Samsung but haven't tested it.
Tried a text but no luck so far. Will keep trying.
Also, MSVC is working great.
Click to expand...
Click to collapse
Tried the Tellme file on my Pure. It works decently while I'm on my wireless network but continually tells me it can't find the network even when it's at full strength on the 3G network. Maybe it's because it was configured to search for Sprint's network, I don't know. I've seen other say they got it to work for them.
Voice Dial for Touch Diamond 2
Hello, All:
Concerning voice dial for the Touch Diamond 2, I found Cyberon Voice Dial on this bulletin board in a thread somewhere, but, regretfully, I can't find it back. IF you can find it, it is DA BOMB!! Yeah, you have to record the voice tags, but it works great in noisy environments and almost never makes a mistake. I don't use BT with the new phone, but Cyberon worked great with the BT on my old Wizard. Whatever you do, don't pay for Vito Voice Dial. It is truly unserviceable in any situation with even moderate noise.
Good Luck! Hope this helps.
GrandAdmiral said:
Tried the Tellme file on my Pure. It works decently while I'm on my wireless network but continually tells me it can't find the network even when it's at full strength on the 3G network. Maybe it's because it was configured to search for Sprint's network, I don't know. I've seen other say they got it to work for them.
Click to expand...
Click to collapse
The program won't even start for me on WiFi.
I believe the network issue is specific to AT&T from what I have read. No fix for this yet.
Pity....
MSVC works great through BT headset on my tilt2 (Energy ROM 21885 december 31 sense 2.5), with the exception of using it to dial. I figured out why: When I would activate MSVC and tell it to say "call home" the command is recognized, and I am askd for a confirmation. So far so good... The troube is that when i answer "yes" , MSVC brings up the MS dialer NOT the HTC dialer, so it tries to dial but never connects to the radio to dial and just goes back to the sense 2.5 home screen. Testing MSVC with other commands, such as open <program> confirms this, since they do work. This occurs whether i initiate MSVC through the headset or through the talk button on the phone
Anyone have any clue how to get MSVC to bring up the HTC dialer when using it through bluetooth headset? MSVC works fine when i am not in handsfree mode.
jgamlieli said:
MSVC works great through BT headset on my tilt2 (Energy ROM 21885 december 31 sense 2.5), with the exception of using it to dial. I figured out why: When I would activate MSVC and tell it to say "call home" the command is recognized, and I am askd for a confirmation. So far so good... The troube is that when i answer "yes" , MSVC brings up the MS dialer NOT the HTC dialer, so it tries to dial but never connects to the radio to dial and just goes back to the sense 2.5 home screen. Testing MSVC with other commands, such as open <program> confirms this, since they do work. This occurs whether i initiate MSVC through the headset or through the talk button on the phone
Anyone have any clue how to get MSVC to bring up the HTC dialer when using it through bluetooth headset? MSVC works fine when i am not in handsfree mode.
Click to expand...
Click to collapse
it seems that the solution has to do with timing. if I wait a acouple of seconds before answering the confirmation of dialing the contact, the software has enough time to open up the contact database and then when i answer in the affirmative to redirect to the dialer. So the key is to wait a couple of seconds before answering yes or not the confirmation prompt
Also, try using, "correct", instead of, "yes". My Verizon Ozone seems to recognize it much easier, especially in a high noise environment. Maybe 'cause it's a longer word?
sixbennetts said:
Also, try using, "correct", instead of, "yes". My Verizon Ozone seems to recognize it much easier, especially in a high noise environment. Maybe 'cause it's a longer word?
Click to expand...
Click to collapse
hi there. it is not an issue of the software not recognizing that i said es, or even correct, it is an aiiuse of that the software needs time to be able to pass the call to the HTC dialer, so if i just wait a couple of seconds and then say correct, it works. no lag issue with the sofwate when not using blue tooth though , so maybe there is a setting to solve that
In the WM6.5 is missing Indicator to display the incoming Call Forwareded Calls.
So, i need a program which will display an arrow (or something else) in the taskbar or pop up a indication window when a forwarded incoming call detected on Windows Phones.
yes i am also looking for that...
me too looking for that...
i have never seen this on WM... ițd like an app like that.... i just wonder why isn't it built in the OS...
This is a really embarrassing issue for me too. Anyone please help.
i guess there is no solution for this....
i want this program too!
Hi,
on google search WM Incoming Call Forwarded Indicator
yeah... i knoew about this http://www.xtkit.com/archives/51... but bsides the fact that i do not see the point of paying for such an app... is it working with manila dialer?
Its working with manilla dialer. I have it on my HTC HD2 it works great.
If you need it it´s worth the money.
/Daniel
refer to this
http://forum.xda-developers.com/showthread.php?t=357566&page=2
Don't blame me if it cannot work.
totalcmdext said:
In the WM6.5 is missing Indicator to display the incoming Call Forwareded Calls.
So, i need a program which will display an arrow (or something else) in the taskbar or pop up a indication window when a forwarded incoming call detected on Windows Phones.
Click to expand...
Click to collapse
You don't need app in phone dialer if you forwarded call in top right corner is arow that indicate
btw sry for bad lang
it doesn't!
ccezar2004 said:
it doesn't!
Click to expand...
Click to collapse
Strange in stock rom (my is 1.66) its work perfect i everyday atleast 2 hour forwarded my cals on second mobile
any fix or update for this issue? its really annoying that we cant distinguish between normal call and diverted call.
any update?
on this post :
http://forum.xda-developers.com/showpost.php?p=8547625&postcount=25
Kingzao just developed a program and share its source code. but that seems to work only on WM 6.1. please any one update this for HD2.