Is it possible to dynamically reference a specific resource in the R.raw.-folder?
For instance, if I have an mp3 in the raw-foler named "hello.mp3" I can reference it in the code with:
Code:
mp = MediaPlayer.create(getBaseContext(), R.raw.hello);
But how do I replace the last "hello" with the content of a variable, so that I can load different mp3's from R.raw with the same code?
Code:
// CODE NOT WORKING
String soundFile = "helloagain";
String mpPath = "R.raw." + soundFile;
mp = MediaPlayer.create(getBaseContext(), mpPath);
hello,
I'm writing a Android App (java) - but I guess this question is pretty general, and isn't java-specific:
so I have an Array of Elements
and I let a random-number-generator pick one array-element randomly and hand it to me.
now I've also built in a "score"-field into each array Element
so what I want to do now, is that the random-number-generator takes the array's "score" in consideration, and gives me the array-elements with the higher/lower scores with a higher/lower probability
I dont want it to ALWAYS/NEVER give me the elements with the highest/lowest score - just with a higher/lower probability
I hope I could describe my problem in a proper way....
does anybody know how to achieve this?
(as I said, i use java, but i guess code in any language - or even pseudo-code would help me out)
*bump*
anybody?
Try this, it's in C# but it's pretty close to Java.
You cannot directly weight the random function so you have to use a different method.
By applying a weight to each item in the array, then using a random function to select using the weighting values, the results of the selection can be swayed.
The weighting values are relative to each other.
Using the values in the code, 'B' should turn up about three times more often than 'A'
The only object that may need some explanation is Random:
http://msdn.microsoft.com/en-us/library/system.random(v=VS.80).aspx
Code:
using System;
namespace RandomWeighting
{
class Program
{
static void Main(string[] args)
{
char[] Select = new char[10] {'A','B','C','D','E','F','G','H','I','J'};
int[] Weight = new int[10] {10,30,25,60,20,70,10,80,20,30};
int[] WeightSum = new int[10];
int i,j,k;
Random Rnd = new Random();
WeightSum[0]=Weight[0];
for (i = 1; i < 10; i++)
WeightSum[i] = WeightSum[i - 1] + Weight[i];
for (j = 0; j < 70; j++)
{
k = Rnd.Next(WeightSum[9]);
for (i = 0; k > WeightSum[i]; i++) ;
Console.Write(Select[i]);
}
Console.WriteLine();
}
}
}
Output:
Code:
HEFIBHHCCFBCAEFFDHACHBEJHHFDFIDFEDFFCHHDJBIDJEHHFHCJJJBHJGBDDGFDDFHHHB
Note the low density of A and G as opposed to H
It is just a sample at random, but 2 'A's and 7 'B's roughly matches the conjecture above, but over a million selections, the distribution is as follows:
Code:
A 30664
B 84187
C 70648
D 168481
E 56529
F 197311
G 28145
H 225764
I 56613
J 81658
If your code changes values in the Weight array then the WeightSum array must be recalculated.
wow, thats a lot!
The only thing I dont understand about the code is this line:
k = Rnd.Next(WeightSum[9]);
for (i = 0; k > WeightSum; i++) ;
what exactly happens here?
what kind of a for-loop is this?
why is there no body?
and strangely, while debugging this line, i noticed that the value of i jumps to some random number in this line - and I have no idea why and how
------
by the way: I've already tried it out, it works pretty good.
although I noticed that the first element always gets picked ALOT, no matter how low the weight.
I think thats a flaw in the algorithm
After the following code:
Code:
for (i = 1; i < 10; i++)
WeightSum[i] = WeightSum[i - 1] + Weight[i];
The WeightSum array contains the following values:
Code:
[0] 10
[1] 40
[2] 65
[3] 125
[4] 145
[5] 215
[6] 225
[7] 305
[8] 325
[9] 355
The Random.Next() function that takes a single integer as an argument is defined as:
-------- Courtesy of MS VS .NET Help ------
public virtual int Next(int maxValue)
Parameters maxValue Type: System.Int32
The exclusive upper bound of the random number to be generated. maxValue must be greater than or equal to zero.
Return Value Type: System.Int32
A 32-bit signed integer greater than or equal to zero, and less than maxValue; that is, the range of return values ordinarily includes zero but not maxValue. However, if maxValue equals zero, maxValue is returned.
-------------- End of Help ----------------
So, we are asking for a random value between 0 and 354,(element WeightSum[9] above). The following code then finds which is the lowest element of WeightSum which holds a value greater than the one we have been given. When this happens 'i' contains the index to use for the selection.
Code:
for (i = 0; k > WeightSum[i]; i++);
The standard construction of a for loop in C is
for(One or more initialisation statements; Do_While_True Condition; One or more iteration statements)
{
loop processing code;
}
If there is nothing to do in the loop body, you don't need it, and you can replace it with the ';' at the end of the for statement. In effect, it is identical to the following code:-
Code:
i=0;
while(k > WeightSum[i])
{
i++;
}
As regards the first element being picked more than the others, have a look at the distribution table in post #3. It is what you would expect for the values given. I assume the difference is either the Random function in Java or some different implementation between C# and Java.
You may have to change some of the code slightly, i.e. change the for() loop to the while() loop above and step though it in the Java debugger to get to the root of the problem.
You can't debug a for loop followed by an immediate ';' The entire for loop is executed to completion when you use debug and try and step through it. To debug it place a dummy statement in the for loop. A breakpoint may now be set on this line.
Code:
int i,z;
for (i = 0; k > WeightSum[i]; i++)
{
z=0;
}
ActionScript and Javascript versions ...
Thanks for the great write-up! In case anyone is interested, I've adapted this into a javascript and ActionScript class. If anyone is interested, I've attached the code. For a more in-depth post, check out blog.teamthinklabs.com.
Cheers!
Kipp Ashford
Art Director
Seven2 Interactive
I'm pretty new to java and somewhat new to android and I've been looking everywhere for the past 3 or 4 days but cant seem to find the answer to my question. I'm making an app that is pretty simple and has only one real main function and that is to pull movie names, release dates, and the movie's format (dvd, blu-ray etc) into the app automatically from a very simple file that I will host on my server.
Now I I'm currently able to input the needed information manually via a base-adapter and a strings file within each months activity but I want to have the ability to push the information remotely which will then give my app (and myself) the ability to update the information as well as to place it into the 3 line listview format that I've already established.
Now I've been reading about Simple:XML, gson, SAX, etc but seeing as the information is just 3 small lines of text (again just the movie name, date and format which doesn't use much space and will be using the same string format for all 12 months) my question is what would be the best route as to the format of the file (i.e. xml, json, plain text, etc) and how would I go about getting this information into my app on the fly? I've included some code snippets below in the hopes they will make my question a little more clear.
I've posted this on several other forums and android dev sites and nobody seems to be able to give me some guidance or simply will not reply at all. I cannot continue on my app until I'm able to figure this out and seeing as it is completed aside from this problem it is becoming a very frustrating experience. I'm hopeful that someone here will be able to give my some help out. Thank you in advance.
The string for each result
Code:
public class SearchResults {
private String Name = "";
private String Date = "";
private String Format = "";
public String getName() {
return Name;
}
public void setName(String Name) {
this.Name = Name;
}
public String getDate() {
return Date;
}
public void setDate(String Date) {
this.Date = Date;
}
public String getFormat() {
return Format;
}
public void setFormat(String Format) {
this.Format = Format;
}
This below is where the actual list-view is populated and shown. Each new search result creates a three line text-view.
Code:
private ArrayList<SearchResults> GetSearchResults(){
ArrayList<SearchResults> results = new ArrayList<SearchResults>();
SearchResults sr1 = new SearchResults();
sr1.setName("Movie #1");
sr1.setDate("July 24th");
sr1.setFormat("DVD, Blu-Ray");
results.add(sr1);
sr1 = new SearchResults();
sr1.setName("Movie #2");
sr1.seDate("July 19th");
sr1.setFormat("DVD, Blu-Ray, Digital");
results.add(sr1);
return results;
}
Can anybody help me with this please?
I have been looking into the C-Sharp__DLLImport project here:
http://forum.xda-developers.com/showthread.php?t=1006331&highlight=dllimport
I am trying to modify the FileSystem project to be able to get a list of the modules that are loaded for each process.
Code:
STDMETHODIMP CFileSystemIO::GetModulesForProcess(DWORD dwPID, BSTR* result)
{
// Get the process snapshot
HANDLE hModuleSnapshot = CreateToolhelp32Snapshot( TH32CS_SNAPMODULE, dwPID );
// Initialize the module entry structure
MODULEENTRY32 moduleEntry = { 0 };
moduleEntry.dwSize = sizeof( moduleEntry );
// Get the first module info
BOOL Return = FALSE;
Return = Module32First( hModuleSnapshot, &moduleEntry);
// Getting process info failed.
if( !Return )
{
CloseHandle( hModuleSnapshot );
return S_FALSE;
}
int x = 1;
CString modList(TEXT(""));
do
{
modList.AppendFormat(TEXT("%d-%d-%d-%d-%d-%d-%s-%s\n"),
moduleEntry.dwSize,
moduleEntry.th32ProcessID,
moduleEntry.GlblcntUsage,
moduleEntry.ProccntUsage,
moduleEntry.modBaseAddr,
moduleEntry.modBaseSize,
moduleEntry.szModule,
moduleEntry.szExePath);
}
while( Module32Next( hModuleSnapshot, &moduleEntry ));
// Close the handle
CloseHandle( hModuleSnapshot );
// set the result
*result = (modList.AllocSysString());
return S_OK;
}
The code is based off a similar function that is already in the project (the CFileSystemIO::MessageBoxRunningProc function which works fine).
By putting some MessageBoxes in there for debugging, I can confirm that the Module32First and Module32Next methods are working correctly. When it gets to the line:
*result = (modList.AllocSysString());
The application crashes. I put a try/catch around there and it didn't trigger a CMemoryException or any other exception.
Any idea why this method would be causing the app to crash?
As an update to this, I was able to figure out the problem. I was unaware of this, but closing the handle generated in the method to get the process messes up the generation of the modules. I didn't think this would be the case since when you generate the handle it also takes a pid. I ended up combining the 2 methods.
The final project uses com interop to call the native methods and it builds a tasklist with all the corresponding modules as subclasses. You can find out which libraries and interfaces are in use by which applications, and where those dll files are located on your phone. If anyone wants to see it, I can post it at some point. It's not a very elegant looking interface, but it gets the job done.
So I wanted to implement something like TeslaMate for my UIS7862. The idea being to be able to visualize trips, and various vehicle stats from Grafana (and maybe a live location tracker).
My original plan was to use TorquePro to log vehicle stats + GPS location, and then to send those logs to a listening webserver for storage in Prometheus and display via Grafana. I found an Automate script to hook this into HomeAssistant here: here. However, I wanted a few additional items:
I don't have a SIM card in my radio and do not normally have it connected to my phone as a hotspot, so internet connection is intermittent and I didn't want to lose data
I wanted to be able to upload to different IP addresses depending on whether I'm connected to the home network (i.e. at home) or otspot (i.e I'm driving)
I wanted to be able to store stats from the media canbus (like fuel level) that don't seem to be available on OBD-II (at least I haven't found them for my GTI)
I wanted to learn Kotlin and write a 'real' Android app
I was successful in writing an app that would send all unsent Torque data to my home server once it connects via wifi (basically reproducing Rob's Automate script), but getting the canbus data out of the radio required more work.
I decompiled 190000000_com.syu.canbus.apk and set about learning how it worked, and trying to connect my own app.
What I found so far:
Unlike the MKC/D units which appear to communicate with the canbus module via a serial port, the FYT radios seem to use I2C
The com.syu.ms.apk is responsible for the hardware communication
the com.syu.canbus.apk connects to the com.syu.ms.toolkit Intent to access hardware data.
This Service provides a getRemoteModule() procedure which seems to provide 4 different interfaces:
0: the 'Main' interface
4: the Sound interface
7: the Canbus interface
14: the 'CanUp' interface (no idea what this is)
each interface (IRemoteModule) provides 4 commands: cmd, get, register, unregister
The 'register' command registers a callback to a specific ID. That callback will be called when the value at the ID changes.
For instance, on my GTI, ID '6' of the canbus module is the fuel-level. I can register a callback at ID=6, and that callback will be called whenever the value changes
I haven't spent time to look at the other modules, nor what the 'get' or 'cmd' functions do
With the above, I now have a rudimentay application that will fetch the Fuel level from the radio (via the Canbox). My plan is to incorporate this with the OBDII capture to create a composte data-set to upload to my prometheus database. Interestingly, the com.syu.ms.toolbox only responds back to me if I use the 'com.syu.ipc.[IModuleCallback|IRemoteModule|IRemoteToolkit' descriptor.
I will make everything above available on GitHub once I've cleaned it up a bit. It should be possible to extract any canbus data the radio has (along with other internal state depending on what the other modules expose). However, what I've learned is that every CanBox has a different interface and presents diferent data, so the effort to make a generic interface would be very high and beyond the scope of what I plan to do. There are about 2500 unique CanBoxes listed in FinalCanbus. I see about 600 unique classes implementing these modules, each of which implements a different set of registerable IDs.
I plan to add an interface to register any ID if you know what you are looking for to my app. I think @surfer63 could do the same to FytHwOneKey if they were so inclined, but without a table of which features are available it would only likely benefit programmers.
I'll update this post with a GitHub link once available, but I thought there might be some interest in the canbus analysis stuff.
Here is the GitHub repository for the Canbus access library: https://github.com/AxesOfEvil/FYTCanbusMonitor
The CanBox ID is specified by ID=1000.
The low 16 bits appear to specify the canbox type, and the upper 16bits seem to represent the car make/model. This mapping happens in syu.ms.module.canbus.HandlerCanbus with the name mapping in module.canbus.FinalCanbus
Here is an example of the IDs for (some) Reise RZS CanBox to give an idea of what type of data is available:
Code:
U_CUR_OIL_EXPEND 0
U_MISC_BEGIN 0
U_LOW_OIL_WARN 1
U_LOW_BATTERY_WARN 2
U_LIFE_BELT_WARN 3
U_CLEAN_FLUIT_WARN 4
U_HANDLE_BRAKE_WARN 5
U_RESIDUAL_OIL 6
U_BATTERY_VOLTAGE 7
U_DRIVE_MILE 8
U_PARK 9
U_RADAR_MUTE 10
U_CUR_SPEED 11
U_ENGINE_SPEED 12
U_OUT_TEMP 13
U_AIR_BEGIN 14
U_AIR_POWER 14
U_MISC_END 14
U_AIR_BIG_WIND_LIGHT 15
U_AIR_LITTLE_WIND_LIGHT 16
U_AIR_AC 17
U_AIR_MAX 18
U_AIR_CYCLE 19
U_AIR_DUAL 20
U_AIR_REAR 21
U_AIR_BLOW_UP 22
U_AIR_BLOW_BODY 23
U_AIR_SHOW 24
U_AIR_BLOW_FOOT 25
U_AIR_WIND_LEVEL 26
U_AIR_TEMP_LEFT 27
U_AIR_TEMP_RIGHT 28
U_AIR_AQS 29
U_AIR_SEAT_HEAT_LEFT 30
U_AIR_REAR_LOCK 31
U_AIR_AC_MAX 32
U_AIR_SEAT_HEAT_RIGHT 33
U_AIR_TEMP_OUT 34
U_AIR_AUTO 35
U_AIR_END 36
U_DOOR_BEGIN 37
U_DOOR_ENGINE 37
U_DOOR_FL 38
U_DOOR_FR 39
U_DOOR_RL 40
U_DOOR_RR 41
U_DOOR_BACK 42
U_DOOR_END 43
U_AIR_FRONT 44
U_AIR_BLOW_MODE 45
U_CNT_MAX 46
AxesofEvil said:
I plan to add an interface to register any ID if you know what you are looking for to my app. I think @surfer63 could do the same to FytHwOneKey if they were so inclined, but without a table of which features are available it would only likely benefit programmers.
Click to expand...
Click to collapse
Nice work you are doing here.
But I do not know what you mean with above statement.
For further reading: lbdroid did some reverse engineering in 2006.
You might take a look at some of his repos: https://github.com/lbdroid/MCUd
In that github/readme are 5 other repos. They are outdated, but might still give you some clues.
surfer63 said:
Nice work you are doing here.
But I do not know what you mean with above statement.
For further reading: lbdroid did some reverse engineering in 2006.
You might take a look at some of his repos: https://github.com/lbdroid/MCUd
In that github/readme are 5 other repos. They are outdated, but might still give you some clues.
Click to expand...
Click to collapse
Sorry, maybe that was inappropriate. I guess I was thinking about ways to give users access to the canbox data since Tasker doesn't seem able to hook into services this way. One use case would be direct access to steering wheel buttons from the canbox (my understanding is that in some cases FwHwOneKey can't handle canbus related buttons...maybe I'm wrong). Or, perhaps there isn't really any use at all for this info to trigger user applications.
I know there was a request to access Canbox data for widgets (for instance to be able to display the outside temperature on a custom screen). This method should be able to support something like that, but I have no idea if there is an existing app that could make use of it. Maybe I could write a proxy that would turn service updates into system broadcast events? Just spitballing here.
Wow, it’s really communicate with canbus from user apps?
May be there is way to read can data, like we can see in develop mode
Sdese2000 said:
Wow, it’s really communicate with canbus from user apps?
May be there is way to read can data, like we can see in develop mode
Click to expand...
Click to collapse
To be clear, I only have access to whatever the canbox has already decoded (and the radio has accepted), at least on my vehicle, thee is a lot more CAN traffic that is ignored. What CAN data do you see in develop mode? I am not aware of this.
AxesofEvil said:
Sorry, maybe that was inappropriate. I guess I was thinking about ways to give users access to the canbox data since Tasker doesn't seem able to hook into services this way. One use case would be direct access to steering wheel buttons from the canbox (my understanding is that in some cases FwHwOneKey can't handle canbus related buttons...maybe I'm wrong). Or, perhaps there isn't really any use at all for this info to trigger user applications.
Click to expand...
Click to collapse
Not inappropiate at all. I just didn't get what you meant.
And yes: The BT like commands are still a big misunderstanding (for me that is). I think that could very well be a combi of activity, canbus and "something else"
But as my unit doesn't have buttons anymore, and neither my previous one, I don't spend time on my own app anymore.
AxesofEvil said:
To be clear, I only have access to whatever the canbox has already decoded (and the radio has accepted), at least on my vehicle, thee is a lot more CAN traffic that is ignored. What CAN data do you see in develop mode? I am not aware of this.
Click to expand...
Click to collapse
In Head Unit settings there is trigger, if turn on it, can logs will appear on the screen.
If found some code in com/syu/util/DebugViev.jave that provide it
Spoiler
package com.syu.util;
import android.content.Context;
import android.graphics.Canvas;
import android.graphics.Paint;
import android.support.p000v4.internal.view.SupportMenu;
import android.view.View;
import android.view.WindowManager;
import java.util.Locale;
public class DebugView extends View {
private int CELL_HEIGHT = 35;
int[] COLOR = {SupportMenu.CATEGORY_MASK, -1, -16711936, -256, -16776961};
private final int MAX = 16;
private final int TEXT_SIZE = 23;
/* access modifiers changed from: private */
public int[] mColors = new int[16];
/* access modifiers changed from: private */
public int mCount;
private boolean mDbg = false;
/* access modifiers changed from: private */
public int mLastIndex;
private WindowManager.LayoutParams mLp = ToolkitApp.buildOverlayLayoutParams(-1, -1);
/* access modifiers changed from: private */
public int mMsgCnt;
/* access modifiers changed from: private */
public String[] mMsgs = new String[16];
private Paint mPaint = new Paint();
public DebugView(Context context) {
super(context);
init();
}
private void init() {
this.mPaint.setAntiAlias(true);
this.mPaint.setTextSize(23.0f);
this.mPaint.setColor(-1);
}
public void setDbg(boolean flag) {
this.mDbg = flag;
}
public boolean isDbg() {
return this.mDbg;
}
public WindowManager.LayoutParams getWindowLayoutParams() {
return this.mLp;
}
public void msg(String msg) {
if (this.mDbg && msg != null) {
HandlerUI.getInstance().post(new MessageHelper(msg));
}
}
public void msg2(String msg) {
if (this.mDbg && msg != null) {
HandlerUI.getInstance().post(new MessageHelper(msg));
}
}
public void msgHex(String str, byte[] data, int start, int length) {
if (this.mDbg && data != null) {
if (data.length - start < length) {
length = data.length - start;
}
String msg = String.valueOf(str) + " * ";
for (int i = 0; i < length; i++) {
String c = Integer.toHexString(data[start + i] & 255).toUpperCase(Locale.CHINA);
if (c.length() < 2) {
c = "0" + c;
}
msg = String.valueOf(msg) + c + " ";
}
HandlerUI.getInstance().post(new MessageHelper(msg));
}
}
public void msgHex(String str, int[] data, int start, int length) {
if (this.mDbg && data != null) {
if (data.length - start < length) {
length = data.length - start;
}
String msg = String.valueOf(str) + " * ";
for (int i = 0; i < length; i++) {
String c = Integer.toHexString(data[start + i] & 255).toUpperCase(Locale.CHINA);
if (c.length() < 2) {
c = "0" + c;
}
msg = String.valueOf(msg) + c + " ";
}
HandlerUI.getInstance().post(new MessageHelper(msg));
}
}
private class MessageHelper implements Runnable {
private String mMessage;
public MessageHelper(String msg) {
this.mMessage = msg;
}
public void run() {
DebugView debugView = DebugView.this;
debugView.mLastIndex = debugView.mLastIndex + 1;
DebugView debugView2 = DebugView.this;
debugView2.mCount = debugView2.mCount + 1;
if (DebugView.this.mLastIndex > 15) {
DebugView.this.mLastIndex = 0;
}
if (DebugView.this.mCount > 16) {
DebugView.this.mCount = 16;
}
DebugView debugView3 = DebugView.this;
debugView3.mMsgCnt = debugView3.mMsgCnt + 1;
DebugView.this.mMsgs[DebugView.this.mLastIndex] = String.format("%06d @ %s", new Object[]{Integer.valueOf(DebugView.this.mMsgCnt), this.mMessage});
DebugView.this.mColors[DebugView.this.mLastIndex] = DebugView.this.COLOR[DebugView.this.mLastIndex % DebugView.this.COLOR.length];
DebugView.this.invalidate();
}
}
/* access modifiers changed from: protected */
public void onDraw(Canvas canvas) {
if (this.mCount != 0) {
int count = this.mCount;
int firstIndex = (this.mLastIndex - count) + 1;
if (firstIndex < 0) {
firstIndex += 16;
}
if (firstIndex + count > 16) {
int rightCount = 16 - firstIndex;
int leftCount = count - rightCount;
for (int i = 0; i < rightCount; i++) {
int index = firstIndex + i;
this.mPaint.setColor(this.mColors[index]);
canvas.drawText(this.mMsgs[index], (float) 5, (float) ((i + 1) * this.CELL_HEIGHT), this.mPaint);
}
for (int i2 = 0; i2 < leftCount; i2++) {
this.mPaint.setColor(this.mColors[i2]);
canvas.drawText(this.mMsgs[i2], (float) 5, (float) ((rightCount + i2 + 1) * this.CELL_HEIGHT), this.mPaint);
}
return;
}
for (int i3 = 0; i3 < count; i3++) {
int index2 = firstIndex + i3;
this.mPaint.setColor(this.mColors[index2]);
canvas.drawText(this.mMsgs[index2], (float) 5, (float) ((i3 + 1) * this.CELL_HEIGHT), this.mPaint);
}
}
}
}
I have updated the OP with a link to the GitHub library (here). The library is not really meant to be used standalone, but instead to be incorporated into other projects. I haven't posted the code for the logger as there is still quite a bit more to do on that side.
The library repo does include an example application which will simply log every message received to the screen/logfile (in /Downloads). It is very inefficient since it just blindly asks for every possible ID regardless of whether it is actually available for a given CanBox or not, but is meant to give a quick idea of what data is available and a short example of how to use the library. The latest compiled APK can be found here: https://github.com/AxesOfEvil/FYTCanbusMonitor/releases
I found this interesting tidbit today:
It seems to be that arbitrary commands can be sent to the canbus through the radio via sys.ms by calling ToolkitDev.writeMcu(0xE3, PID, data-len, data0, data1, ...) (where data can be 1-8 bytes).
Edit: ToolkitDev.writeMcu(0xE3, ...) seems to write commands to the canbox module. As I don't have the source for teh module, I'm not sure how it handles these commands, but they don't g out verbatim on the canbus itself.
There is also ToolkitDev.writeCanbusDirect, but this may send commands via an OBDII dongle...Edit: this seems to just directly send raw commands to the CanBox. It is similar to the above but requires manually calculating the entire packet (including checksum)
I have not found a way to pass arbitrary data from an external app through an intent to allow other apps to send arbitrary canbus commands, but with a hacked syu.ms, it probably means I can eliminate the DynAudio AMP control box I had to make to get my audio working. And that with more hacking, it may be possible to send GPS directions and music info to the HUD.
AxesofEvil said:
The CanBox ID is specified by ID=1000.
The low 16 bits appear to specify the canbox type, and the upper 16bits seem to represent the car make/model. This mapping happens in syu.ms.module.canbus.HandlerCanbus with the name mapping in module.canbus.FinalCanbus
Here is an example of the IDs for (some) Reise RZS CanBox to give an idea of what type of data is available:
Code:
U_CUR_OIL_EXPEND 0
U_MISC_BEGIN 0
U_LOW_OIL_WARN 1
U_LOW_BATTERY_WARN 2
U_LIFE_BELT_WARN 3
U_CLEAN_FLUIT_WARN 4
U_HANDLE_BRAKE_WARN 5
U_RESIDUAL_OIL 6
U_BATTERY_VOLTAGE 7
U_DRIVE_MILE 8
U_PARK 9
U_RADAR_MUTE 10
U_CUR_SPEED 11
U_ENGINE_SPEED 12
U_OUT_TEMP 13
U_AIR_BEGIN 14
U_AIR_POWER 14
U_MISC_END 14
U_AIR_BIG_WIND_LIGHT 15
U_AIR_LITTLE_WIND_LIGHT 16
U_AIR_AC 17
U_AIR_MAX 18
U_AIR_CYCLE 19
U_AIR_DUAL 20
U_AIR_REAR 21
U_AIR_BLOW_UP 22
U_AIR_BLOW_BODY 23
U_AIR_SHOW 24
U_AIR_BLOW_FOOT 25
U_AIR_WIND_LEVEL 26
U_AIR_TEMP_LEFT 27
U_AIR_TEMP_RIGHT 28
U_AIR_AQS 29
U_AIR_SEAT_HEAT_LEFT 30
U_AIR_REAR_LOCK 31
U_AIR_AC_MAX 32
U_AIR_SEAT_HEAT_RIGHT 33
U_AIR_TEMP_OUT 34
U_AIR_AUTO 35
U_AIR_END 36
U_DOOR_BEGIN 37
U_DOOR_ENGINE 37
U_DOOR_FL 38
U_DOOR_FR 39
U_DOOR_RL 40
U_DOOR_RR 41
U_DOOR_BACK 42
U_DOOR_END 43
U_AIR_FRONT 44
U_AIR_BLOW_MODE 45
U_CNT_MAX 46
Click to expand...
Click to collapse
Where did these IDs come from? Did you find one for Illumination/Headlights?
The IDs came out of the source code for 190000000_com.syu.canbus.apk
The IDs are canbox and probably vehicle specific, so such info may be available, but you need to identify exactly what you are looking for.
Use JadX or BytecodeViewer or a similar application to analyze the apk file above, and look in app/src/main/java/module/canbus for the appropriate Canbox for your vehicle