Hello,
I installed the WM6.1 rom Herald V6.1.405.16.fix, but the process was a success, but he is starting a screen of red and WM touchflo is restarting all the time.
Can you help me?
Thank you already!
This forum is for Rom Development not Questions.
Wrong forum.
Software on your SDmicro card is the problem.
Remove it before soft reset and it will solve it on the short term.
josuka said:
Hello,
I installed the WM6.1 rom Herald V6.1.405.16.fix, but the process was a success, but he is starting a screen of red and WM touchflo is restarting all the time.
Can you help me?
Thank you already!
Click to expand...
Click to collapse
Related
i'm a noob in every since of the phrase... i have a g4 wizard running faria crossbow wm6, i wanna go to a stock tmobile rom... then up to tnt 5 wm6 touchflo... i searched all over the site and none of the tutorials were clear enough... so could someone PLEASE... give me an extremely detailed tutorial on how to do all of this, and point me to all the software needed... any and all help will be greatly appreciated.
http://forum.xda-developers.com/forumdisplay.php?f=343
systematic said:
i'm a noob in every since of the phrase... i have a g4 wizard running faria crossbow wm6, i wanna go to a stock tmobile rom... then up to tnt 5 wm6 touchflo... i searched all over the site and none of the tutorials were clear enough... so could someone PLEASE... give me an extremely detailed tutorial on how to do all of this, and point me to all the software needed... any and all help will be greatly appreciated.
Click to expand...
Click to collapse
Here is everything you need:
http://forum.xda-developers.com/showthread.php?t=298613
http://forum.xda-developers.com/showthread.php?t=328917
-McMex
how to flash
ok... i know i sound "rrreeeaaalll sssllloooowwww" asking this question... but just exactly how do i "flash"? also what programs are needed for this procedure?
systematic said:
ok... i know i sound "rrreeeaaalll sssllloooowwww" asking this question... but just exactly how do i "flash"? also what programs are needed for this procedure?
Click to expand...
Click to collapse
C'mon man, this is not a "feed me for free" community. It's a developers forum. It really doesn't sound to me that you are here to develop something.
Start reading and stop asking silly questions or i will have to take charges.
Just so that you don't think I am truly a bad person :
Connect the PDA to the PC using the USB cable
On your PC start the Rom Update Utility(aka. RUU)
Read and follow stepps and try not to start any programs while the RUU is updating your rom and you'll be fine.
learning?
ok so bear with me... i thoroughly read equinoxe's tut, and was wondering; do flash the t-mo oem rom, than follow the tutorial to step up to tnt 5 pro?
systematic said:
i'm a noob in every since of the phrase... i have a g4 wizard running faria crossbow wm6, i wanna go to a stock tmobile rom... then up to tnt 5 wm6 touchflo... i searched all over the site and none of the tutorials were clear enough... so could someone PLEASE... give me an extremely detailed tutorial on how to do all of this, and point me to all the software needed... any and all help will be greatly appreciated.
Click to expand...
Click to collapse
here u said, ur a complete noob and u dont know how to flash,
Than how come u already got faria crossbow on ur wizard ?
well, either ur kidding or u bought it just now with faria crossbow already installed ???
i bought it like that
OK , if u r on a CID LOCKED G4 u need to reinstall the OEM rom then install shell tool or SoftSPL and install the TNT rom using shell tool / SoftSPL
shell tool
http://forum.xda-developers.com/showthread.php?t=293480
SoftSPL
http://forum.xda-developers.com/showthread.php?t=329147
READ ALL THE POSTS IN THIS THREADS BEFORE TAKING ANY ACTION
B,R
i'm learning
i have gotten as far as wizard love rom, and i've hard spl'd but shelltool doesn't seem to like my device... sometimes it freezes completely, and if it doesn't freeze it wont boot past the ffx looking screen. i've also tried the custom ruu i found in one of the tutorials.
flash back
at first you must flash back to an original rom. you can download it from the site from your provider. than you can start the shelltool.
remember that the screen from your wizard must be completly white bevor you can continue.
good luck
i've successfullly flashed tnt 5 pro... thanx to all who pointed me in the right direction...
systematic said:
I've successfully flashed tnt 5 pro... thanx to all who pointed me in the right direction...
Click to expand...
Click to collapse
Glade u have got it up and running,enjoy the new lunacy of Rom Flashing
This is an excellent Forum with wonderful and helping Moderators and senior members always there to help u out.We all have come here as newbies,but have gained alot,good luck
After upgrading tot WM6.1 i got the 86000107-problem when syncing with 2 computers. I threw my TyTN II away
This weekend I installed the PDAcorner V17-rom and noticed that this problem still exist
My questions:
1. Does anybody know a rom that has fixed this problem (maybe WM6.5 ??)
If not
2. Advice which WM6.0 to take (because i think it's a WM6.0 question)
3. Other advice is welcome too
Tia
Robert
RoCoJo said:
After upgrading tot WM6.1 i got the 86000107-problem when syncing with 2 computers. I threw my TyTN II away
This weekend I installed the PDAcorner V17-rom and noticed that this problem still exist
My questions:
1. Does anybody know a rom that has fixed this problem (maybe WM6.5 ??)
If not
2. Advice which WM6.0 to take (because i think it's a WM6.0 question)
3. Other advice is welcome too
Tia
Robert
Click to expand...
Click to collapse
It's not the ROM has something to do with active sync, please use the search with the error you have provided as some people have managed to solve this issue.
My first step would be uninstall active sync remove anything to do with active sync install then install again but: Here is a link to start you off http://www.google.com/custom?hl=en&...sult&cd=1&q=Activesync+error+86000107&spell=1
Here is another more to the point http://forum.xda-developers.com/showthread.php?t=371519 "not sure it will solve issue as have not got the problem"
Also in future please post in the correct section as really has nothing to do with ROM or ROM development.........
Thread closed.
There are already many existing discussions on this error code on this forum.
Thanks
Dave
Howsit peeps!
I wanna ask someone to guide me trough to upgrade my Samsung i600 to WM 6.1. (I sooo badly wanna do it!)
I upgraded a few ROM of different devices without any problems.
When i tried Nokser's first i600 release, i bricked my phone. I dunno what happened, but there was no radio. I gave it into a repair centre, and they had to replace PCB......... thats why im sceptical.
This is what i have:
Samsung i600 Stock WM6.0 ROM
PDA version:
i600UJCGJ3
Phone version
i600UJCGJ3
Eboot:
i600UJCGJ3
Windows Mobile 6 Standard:
CE OS 5.2.1437 (Build 17944.0.3.1)
Can someone please guide me here, if all this makes sence?
Thank you and its appreciated :-D
First:
Update I600 to WM6 and next update to my WM6.1
nokser said:
First:
Update I600 to WM6 and next update to my WM6.1
Click to expand...
Click to collapse
Hi there Nokser, my phone has WM6 on it already?
The last time i tried to flash your ROM, it would not boot past the "Ultra messaging" screen, and was stuck there.....
I tried the other way mentioned in that thread where i had to add the XXGG2 phone and boot thing, thats where my radio died.......
Can anyone comment on this?
(Heheheh, i dont wanna brick my device again..............lol)
just keep the stock 6.0. I upgraded a few times to 6.1 but it was too buggy and I really liked the card wheel.
phonexpert_alex said:
just keep the stock 6.0. I upgraded a few times to 6.1 but it was too buggy and I really liked the card wheel.
Click to expand...
Click to collapse
Heheheh!
I only use this as a secondary phone, i want the Sliding panel features......
I just dont want to brick my device again....
I wonder why the first upgrade did not work properly.....i did everything as said, and the phone then didt want to pass the "Ultra messaging" screen......
But if so, i will rather keep stock WM6.0, i hoe someone can point me into the right direction....
phonexpert_alex said:
just keep the stock 6.0. I upgraded a few times to 6.1 but it was too buggy and I really liked the card wheel.
Click to expand...
Click to collapse
Ooooooh, btw! I have the Card Wheel as a .cab file works on WM 6.1 Aswell ive heared. I dont take credit for this, i only found it with some hard Googling:
http://forum.xda-developers.com/showthread.php?t=410370&highlight=samsung+cardwheel
Yay!
I took a chance, and tried it again....
It worked
Thanks for all your help guys! I really wanted to do this, now im running Wm6.1!!!!
May I know how you solved the problem? mine is bricked at that screen also!
Hi to everybody
i'm new of this forum and a noob too .
I've gotten a HTC Universal G3 version.
I've read a lot of threads about flashing Htc Universal but the most of them are refering to Htc Wizard.
I have a laptop with Windows Vista OS, and i would like to flash my Universal G3 version with an updated ROM, possibly a stable version of WM6.5 (or 6.1, it's the same)
Could you show me le last, simple and secure way to do this ?
I'm very confusing, so anyone can help me, do it !!!
Many thks
johnjohnmel
P.S. Does it exist an hacking hardware guide to change Wifi module from 802.11b to 802.11g ?
johnjohnmel said:
Hi to everybody
i'm new of this forum and a noob too .
I've gotten a HTC Universal G3 version.
I've read a lot of threads about flashing Htc Universal but the most of them are refering to Htc Wizard.
I have a laptop with Windows Vista OS, and i would like to flash my Universal G3 version with an updated ROM, possibly a stable version of WM6.5 (or 6.1, it's the same)
Could you show me le last, simple and secure way to do this ?
I'm very confusing, so anyone can help me, do it !!!
Many thks
johnjohnmel
P.S. Does it exist an hacking hardware guide to change Wifi module from 802.11b to 802.11g ?
Click to expand...
Click to collapse
Welcome to the forum
By now not any wm6.5 is STABLE, and if it´s your first time flashing I would strongly recommend to install a 6.1 stable ROM, for that I can recommend Tomal 8.5 or 8.81 ROM´s, they are just great!!
Also if you can flash in XP is easier than in Vista. anyway here instructions for flashing with vista http://forum.xda-developers.com/showthread.php?t=313001
For learning how to, please reade the Wiki here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck and please dont forget to vote!
Hello,
Welcome to the forum,
I would strongly stick with what Orb says here and stick to 6.1. as well as 6.5 being very new, it also uses a lot of ram to run. you find yourself having to reset to reclaim used ram. To start using 6.5 you need a 128mb upgrade.
TAKE YOUR TIME, do nothing until you are SURE you know what to do!
Have fun
Jay
orb3000 said:
Welcome to the forum
By now not any wm6.5 is STABLE, and if it´s your first time flashing I would strongly recommend to install a 6.1 stable ROM, for that I can recommend Tomal 8.5 or 8.81 ROM´s, they are just great!!
Also if you can flash in XP is easier than in Vista. anyway here instructions for flashing with vista http://forum.xda-developers.com/showthread.php?t=313001
For learning how to, please reade the Wiki here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck and please dont forget to vote!
Click to expand...
Click to collapse
Just by reading these guides have become confused.
The first thing i woud like to understand is what you can see in bootloader mode:
when i put my PDA in bootloader mode i can see only a dark monitor with this 2 writtens :
upward : "serial"
bottom : "v1.00"
This is my IPL/SPL version ? So if i've understood well my PDA it's a G3 model, is it right ?
Looking at this guide
http://forum.xda-developers.com/showthread.php?t=285435
i've understood i need to downgrade my PDA to 1.05 ROM, but mine have 1.00 ROM (look upward, refering to booloader mode), so this step will be not a downgrade for me, is it right ?
Could you help to understand this first things ?
Bye
johnjohnmel
HI
You're doing OK! it is indeed a G3 and when you plug it in to the pc's usb it will say USB instead of serial. now follow THIS to upgrade your bootloader. its off the WIKI HERE. read it, it will tell you loads. The biggest problem you will have is running Vista, I only use XP so I cant help you there.
Jay
EDIT...............just spotted THIS about Vista, hope it helps.
johnjohnmel said:
Hi to everybody
i'm new of this forum and a noob too .
I've gotten a HTC Universal G3 version.
I've read a lot of threads about flashing Htc Universal but the most of them are refering to Htc Wizard.
I have a laptop with Windows Vista OS, and i would like to flash my Universal G3 version with an updated ROM, possibly a stable version of WM6.5 (or 6.1, it's the same)
Could you show me le last, simple and secure way to do this ?
I'm very confusing, so anyone can help me, do it !!!
Many thks
johnjohnmel
P.S. Does it exist an hacking hardware guide to change Wifi module from 802.11b to 802.11g ?
Click to expand...
Click to collapse
Untill now i have done only what "Duanes" has suggested (http://forum.xda-developers.com/showthread.php?t=313001) and you also suggested (upgrading bootlader).
About this last thing, i don't understand very well if i've upgraded or downgraded th bootloader, look this
Now what i have to do ?
Please help me, because i'm making meself confused.
Bye
johnjohnmel
P.S. Sorry for my bad english
johnjohnmel said:
Untill now i have done only what "Duanes" has suggested (http://forum.xda-developers.com/showthread.php?t=313001) and you also suggested (upgrading bootlader).
About this last thing, i don't understand very well if i've upgraded or downgraded th bootloader, look this
Now what i have to do ?
Please help me, because i'm making meself confused.
Bye
johnjohnmel
P.S. Sorry for my bad english
Click to expand...
Click to collapse
Hello,
I would now suggest you download a good stable rom, such as TOMALS 8.5 STANDARD build rom onto your today screen connect your pda into the USB port and then follow the instructions for flashing in vista it will then load onto your pda. Now hard reset.
thats it! You can try others later on but its best to try a good solid stable rom first. Like I said use the standard build first.
Jay
responderman said:
Hello,
I would now suggest you download a good stable rom, such as TOMALS 8.5 STANDARD build rom onto your today screen connect your pda into the USB port and then follow the instructions for flashing in vista it will then load onto your pda. Now hard reset.
thats it! You can try others later on but its best to try a good solid stable rom first. Like I said use the standard build first.
Jay
Click to expand...
Click to collapse
Hi, thanks a lot. Finally i solved.
It's MORE SIMPLE that it could seem.
So it's not more necessary to CID-unlock and to download UniversalRUU, becuase in the last ROM there is just inside program to upload new ROMs.
Maybe it's necessary to change WIKI instrunctions.
What do you think ?
Bye and thanks a lot again.
johnjohnmel
responderman said:
Hello,
I would now suggest you download a good stable rom, such as TOMALS 8.5 STANDARD build rom onto your today screen connect your pda into the USB port and then follow the instructions for flashing in vista it will then load onto your pda. Now hard reset.
thats it! You can try others later on but its best to try a good solid stable rom first. Like I said use the standard build first.
Jay
Click to expand...
Click to collapse
Only 2 things go wrong.
Indeed it seems it doesn't function at all GPRS with my Tim italian Network. I've to try UMTS with 3 italian network.
Maybe it's a RADIO Rom version problem.
What can i do to solve this issue ?
Also i can i see in my Home the tipical screens with shortcuts to applications, contacts etc.
Bye
johnjohnmel
johnjohnmel said:
Also i can i see in my Home the tipical screens with shortcuts to applications, contacts etc.
Bye
johnjohnmel
Click to expand...
Click to collapse
System tray is one way to add icons to the home screen, however they only appear in a row at the bottom and it is a bit of a fiddle. you might be better off adding a third party software like mobile shell 3.0 to your rom so you can customise your PDA.
Jay
Hi,
i hope somebody can help me. I looked yesterday the whole day in your forum for a solution, but i didn´t find something.
I have a G3 Wizard, and tried to update to WM 6.5 with the
[ROM][WM6.5][Build 23064][GER|NL] v0.9.8.5 by cYBERdEL [07.10.2009]
rom. I think I forgot, to downgrade to WM 5, and now after every boot the wizard hangs in boot screen.
I tried to change to different roms, ( the 1.05 button rom, the wm6.1 xion rom, which i had installed before, the original vodafone rom )
I don´t know any other solution :-(
Maybe someone can help me.
My current SPL / IPL is 1.01.
Thanks
calli
Here are some pictures of my problem.
image_1
Thats the screen where the wizard hangs during boot.
It is the same position with every rom I tried.
image_2 and image_3
If I try to update to a new rom I don´t get listed the rom informations in the RUU.
Dear callicalli,
You can find the solution to your problem in the following link in post #6 and post #8:
http://forum.xda-developers.com/showthread.php?t=442126
And please first search before you post and also please post in the right place.
Thanks.
Best Regards.
Hmm I thought, that the wizard love rom is only for g4 wizards, but I have a G3 wizard.
I already tried the button rom, but this doesn`t help...
Can I use the wizard love rom with a G3 wizard?
For everyone with the same problem take a look at this post
http://forum.xda-developers.com/showthread.php?t=276963&page=4
Post #1
After that I flashed the wizard with the original vodafone rom, and the problem was solved.
Thx to all