So I'm wanting an application that makes the screen the most reflective it can be (be it turning off the display or displaying a black screen). All I was able to find was Kai's Make-up/Shaving Mirror, which you have to pay for. Is there any free application out there? Seems easy enough, I can't imagine there's no free version.
I have an AT&T Fuze.
Thanks!
press once on the power button? then your phone display should turn off^^
haha, true. Is this really the most reflective state of the screen, though? I would think so, but I have my doubts.
Good call on the button, I still can't figure out how I missed that.
well the more backlight you turn on the less your phone display will reflect. (at least on my htc touch)
Related
Hello,
Yes, I searched everywhere but didn't find any answer.
Is it possible to disable the backlight when notifications comes ? For example, when a SMS or an e-mail arrives, the screen powers up and my pocket presses the screen and do bad things on the screen. This would be a cleaner idea than locking the screen!
I know that phoneAlarm have an option for this but I'm using PhoneWeaver for this profiling job (which is smaller than it). I think it must be a reg key somewhere for this :/
Thanks in advance for your precious help!
To be honest, I do not understand you question but I think you are searching for the sound and alert settings?
Go to start > settings > sound and alerts (and then the 2nd tab)
If this is not what you are looking for, could you be more specific?
he want it to when it turns on because of an alarm or sms or the likes that it
dont have backlight on the lcd
personaly i doubt it's possible i believe that when notifications turn the device on it's 100% the same thing that is sendt to the os as when one press the on button if that is the case that the os cant tell the diff
i doubt it could have different backlight settings depending one
what turns it on
holding the button down for a bit turn off the backlight on many devices
untill the button is pressed for a bit again
also when it's turned off so when the notification turns it on the backlight will be off
but ofcause so will it when power button turns it on
I would like my device (TyTN/Hermes) under windows mobile 6 not to "turn on" when a message arrives because my phone case press on the screen while on my pocket and some strange things arrives (delete messages, surf on the Internet, ...) as random parts and buttons are pressed...
I was hoping this simple thing could have been done easily
slide2unlock
I was wanting the same thing also since I carry my phone in my pocket(htc mogul). As I would reach into my pocket to pull out the phone I would end up pressing button to where programs would open and what not. I tried slide2unlock and I think that has solved my problem pretty good. The only time the phone get unlocked is with an incoming call. Other than that the screen just turns on with an incoming text. Good thing about this program is that if you turn on your screen, the buttons won't do anything without sliding the slider to unlock.
if a password is set it dont go to the today screen and random screen pokes will not result in wild pr0n surfing
or getting a case with s screen in front like the silicon ones or the
full plastic ones will safe the screen from clicks and damage too
I am also looking for a solution. I am currently using slide2unlock, but I would prefer the behavior mentioned above. Specifically, I would like the phone to stay in standby mode (screen off, not responding to button presses or screen taps) when an incoming SMS arrives or phone acquires or loses signal. Currently these behaviors will turn on the phone by itself.
I recently updated to Shamanix 1.3 (aka Schap's 4.01 customized) which has this behaviour
The phone don't turn on when an e-mail/sms/mms arrives (only when a phone call arrives)
Anyone has found the solution for this?
Thanks!
GM.
I would like to know how much larger the cruise against the touch. does anyone have both that can post a side by side shot
I'm in the same boat. It's 10mm longer and 1.5 mm thicker according to specs. Really wish I could experience one before buying!
I was concerned about this as well, but its not bad. Its not too thick for me.
I am very glad I bought it. Its a great device... everything worked perfectly out of the box.
From the specs it's almost identical in size and weight to the Artemis so if you could find a store with an Artemis (or re-brand like O2 XDA Orbit) then that would give you a really good idea of how the TC will feel in the hand and/or pocket. In fact the TC is about a mm thinner than the Artemis so if anything the TC will be slightly more pocketable.
I'm in the UK and when I bought my first device (an Artemis) I went into an O2 shop and played for a long time with the Touch and the Artemis (O2 XDA Orbit). I ended up buying the Artemis, even though it is bigger and I really do care a lot about size and weight, and I didn't regret it. I find it completely unobtrusive in my pockets.
- Julian
Here you go (halfway down the page)
http://www.howardforums.com/showthread.php?t=1303843
JNGold said:
Here you go (halfway down the page)
http://www.howardforums.com/showthread.php?t=1303843
Click to expand...
Click to collapse
Geez, the Polaris IS thick.
I almost pulled the trigger on a Polaris this week but now I'm really torn. I dusted off my old Eten and Trinity and looked at some friends devices this weekend. One thing the Touch has going for is the very few small hard to press buttons. Add to that the screen that some claim is not sensitive enough and you have a device that is ideal to store in your pocket. With my Trinity in my pocket, if I got a text or a call, buttons were always pressed and several apps opened. Even with the flush screen, the Touch never accidentally calls people, etc.
Hard to tell from the pics - does the Polaris have a large button pad like the trinity? I mean, are all the buttons one large piece?
My problem isn't the lack of features with the Touch. I can't get more than 1 bar in my office with AT&T GSM and miss calls but with 3G, I get 3. I've tried this with my trinity and 8525. I've Asked my AT&T rep and he can't explain it. Thought the size of the Touch would offset the reception issue. After 6 mo, I am looking for a small device with 3G. Considering a Polaris or LG MS25. Odd thing is that Sprint and Verizon don't get a signal either but T-mobile does. I'm gonna pop a T-Mobile SIM in my Touch and see. I'd hate to switch carriers but HTC has let us down by not putting 3G in the "enhanced" Touch.
Baxter said:
(..) With my Trinity in my pocket, if I got a text or a call, buttons were always pressed and several apps opened. Even with the flush screen, the Touch never accidentally calls people, etc.(..)
Click to expand...
Click to collapse
If you're seriously in doubt between these two devices you really need to take a look at S2U2 to lock your device (automatically on screen off).
Incidentally: I used to have S2U2 installed on my Artemis, but on the Polaris the ON/OFF button is situated on top of the device, which means that it is very unlikely going to be pushed inside my pocket. By default all buttons except ON/OFF are switched off on screen off. So far I haven't felt the need to install S2U2 on my Polaris, however happy I was with its performance on my previous device.
Seriously, the Touch is no competition for the Polaris, performancewise.
I've been looking for a long time for an app that would prevent all buttons & screen from waking on incoming sms/call but still allow audible alert or vibrate. Pressing on/off would wake much like opening a flip phone. I'd prefer that it run in the background and not require a slide or button combination to "unlock". Just simply have to press power to wake. Does it do that? I'll give it a try if you say it does.
Baxter said:
I've been looking for a long time for an app that would prevent all buttons & screen from waking on incoming sms/call but still allow audible alert or vibrate. Pressing on/off would wake much like opening a flip phone. I'd prefer that it run in the background and not require a slide or button combination to "unlock". Just simply have to press power to wake. Does it do that? I'll give it a try if you say it does.
Click to expand...
Click to collapse
What you're describing is the default functionality of the Polaris. After 3 minutes inactivity it falls asleep on screen off (you can use power button to force sleep) and locks screen and buttons except power button.
Calls, notifications etc. still work, (bluetooth) audio will also keep running.
To awake, press power button.
So you are saying that the polaris doesn't wake when you have an incoming call or sms? Maybe there is a misunderstanding. I want to have to press power before being able to answer.
Sorry if this has been covered already; I searched but didn't find anything, but then I may not know the right terms.
My question is: is there a hack or app to adjust when the hard buttons illuminate? I always forget they're there, and when I do remember I still have to look at the buttons. What I'd really like is to make them light up whenever the dial pad comes up or maybe even when the screen is fully illuminated (not staying on when the screen goes a little dim when you don't touch it for a while). I'd also like to be able to change the hardware Windows button to go back to the Sense home screen, rather than the Start menu.
i use KeypadLedControl, it enables the hardware buttons to light up whenever the screen is on
Excellent, thank you!
Greetings all.
Does anyone know of a good way of locking the screen while making a phone call? I've tried proximity sensor, which does not work on my phone. I currently have my time out setting at 15 seconds, but that does not work either. Any help would be greatly appreciated, I'm sick of face dialing/hanging up.
Proximity sensor does not work at all for me, either. I have been begging and begging people on the forum to help come up with a way to remove or disable the huge "End call" button, as I am constantly hanging up on people with my face.
It is the number one suckiest thing about my Hero right now.
oh, i am looking for this kind of software but found nothing
Probably one of the best "answer/hang up" functions I saw was with SIPdroid. Slide up to answer, slide down to hang up. Of course, the data service is not good enough to always use that though.....
I put the notification bar down down, but it seems almost buggy, sometimes the notification bar stays down and sometimes it just moves up by itself again.
Hit the home button to get out of the dialer window...
Nanan00 said:
Hit the home button to get out of the dialer window...
Click to expand...
Click to collapse
And, then, enjoy the vibrations as you move your homescreen icons around with your face.
Why is there so much resistance to figuring out how to either lock the screen during a call or just disable or remove the stupid soft "End call" button?
Is it significantly more difficult than changing the button color or creating a ROM?
doojer said:
And, then, enjoy the vibrations as you move your homescreen icons around with your face.
Why is there so much resistance to figuring out how to either lock the screen during a call or just disable or remove the stupid soft "End call" button?
Is it significantly more difficult than changing the button color or creating a ROM?
Click to expand...
Click to collapse
Home button is cool if you happen to only touch the end call button and never anything else. I personally called a friend and sent 4 blank texts to someone, don't ask me how....
Home button will cause as many problems. Notification bar coming down is the best way I've found....
an even better way. hold the menu button down.
the keyboard is a great shield.
Avalaunchmods said:
an even better way. hold the menu button down.
the keyboard is a great shield.
Click to expand...
Click to collapse
I will try that one. Seems like it could work, thanks.
Well, google is my friend, i don't know why I doubted ye...
Screen Suite does it for me. The app is $1.99, but it has a setting where it automatically locks the screen on calls.
A bluetooth headset negates that problem completely......
muppetman462 said:
Well, google is my friend, i don't know why I doubted ye...
Screen Suite does it for me. The app is $1.99, but it has a setting where it automatically locks the screen on calls.
Click to expand...
Click to collapse
How do you like it? I found it and it seemed kind of bloated with a lot of features I don't need. Does it eat up memory/power?
I am interested....
I don't get why you guys are having so many issues with this, my phone screen locks at the default of 30s when in calls, it has done this as long as I have had the phone.
Nanan00 said:
I don't get why you guys are having so many issues with this, my phone screen locks at the default of 30s when in calls, it has done this as long as I have had the phone.
Click to expand...
Click to collapse
Mine usually does. Unless it thinks I'm pressing things with my face, which keeps it awake.
That is... if my face doesn't end the call by the time the 30 seconds is up. My guess? It's probably the shape of our faces?
I just try to hold the bottom part of the screen away from my face. Once the screen turns off I've never hung up on someone.
mrcharlesiv said:
I just try to hold the bottom part of the screen away from my face. Once the screen turns off I've never hung up on someone.
Click to expand...
Click to collapse
I do this too. It's very annoying.
Avalaunchmods said:
an even better way. hold the menu button down.
the keyboard is a great shield.
Click to expand...
Click to collapse
Hmm another good one! Any keyboard presses do anything nasty? I'm on swype but I wonder if hitting the mic button on the hacked keyboard would do anything annoying.
Thanks for the tip!
My main problem is when my wife calls, and wants to talk to my son. His face is a lot smaller, and well, everything get screwed up when he uses the phone. As for the program, it does have a lot of features, but all I did was have it set to auto-lock on phone calls. I still have my default vanilla lock screen.
Lack of a both a proximity sensor and dedicated screen-off button is this phone's single unforgivable flaw.
I will never again buy a touchscreen device without at least one of these.
i been having problems with screen meaning everytime i am out during the daytime i can not see my screen what so ever. i was wondering if there is anyway to fix that? is there any apps i can download?
I installed a Widget called Brightness Level (free!) and assigned it to a Jump Key (Jump-X is what i used)
When it is pressed as a widget from a home screen, a pop-up appears with 0%, 25% 50%, 75%,. 100%, & Auto along with a slider-bar to set the screen brioghtness percentage.
Pressing the Jump key brings up the same app. the widget also shows the current setting percentage.
...using the Jump screen allows you to easily access the app even when the screen is completely dark.
sexiashley90 said:
i been having problems with screen meaning everytime i am out during the daytime i can not see my screen what so ever. i was wondering if there is anyway to fix that? is there any apps i can download?
Click to expand...
Click to collapse
any screen will do this in sunlight, turn your brightness to max by swiping your finger from left to right on the status bar and there are also anti glare screen protectors that cedll phone shops sell that may help
I have heard of that tip, but it only seems to work about 1/4 of the time (unless I am really bad at the whole swiping thing) that is why I set up the keyboard shortcut instead which works 98% of the time (assmuing the active program isn't stuck/frozen)
ncmacasl said:
I have heard of that tip, but it only seems to work about 1/4 of the time (unless I am really bad at the whole swiping thing) that is why I set up the keyboard shortcut instead which works 98% of the time (assmuing the active program isn't stuck/frozen)
Click to expand...
Click to collapse
Swiping only works if "Auto" is off, you can also just long touch a spot on the notification bar ;-) ex, left, middle, right or anywhere in between. this seems to work better than swiping for me.
Hope this helps.
you can also just got to settings>display>brightness, uncheck automatic, and adjust brightness that way. you can also assign a jump key shortcut to settings>display, as i just did. that pretty much eliminates the need for a widget.