Hi to all. First of all, I've tried to search but I got to ask since I can't find this topic anywhere.
Ok. Does anybody know how I can open a file with the extension *.txt with my preferred program? When I click directly on the filename, the text is opened in Word Mobile. I would like to just click the filename and don't open my application before I can edit my file. I'm using another application that I prefer for editing my txt files. All suggestions are welcome
use total commander to associate file extensions with programs if your pref
or do it manually using a reg-editor
Thanks for the reply. But if I associate from TC, it still open with MW when I start any txt file from todayscreen, (from within PocketPlus). I suppose that using the TC only work when you open from TC? So I'll try to use a reg.edit. and see what happens. Thanks again.
you can use Schap's Advanced Configuation and change file associations..
I've tried Adv Conf 3.3, but still the Mobile Word opens my txt files
what do you use to open them? you might have specific file associations in your file browser.
what about resco explorer? it works to fix this problem in my device
I prefer the NeboPad, and the registry sais that my txt files should be opened with NeboPad. It seems that MS override this, during the copyright
this is impossible. assiciations are set via OS.. if you set a specific association in Adv Config.. it'll work for the OS unless you're using a file manager that opens using its own preferences. try another file explorer like Resco
I'm running it from Spb Pocket Plus and not from any file explorer. In the Advanced Configuration 3.3 it's stated that file with the extension of *.txt, should be opened with \Program Files\NeboPad\NeboPad.exe. But still it's opened with Mobile Word. I think I'll have to go back to Notes with the *.pwi extension. Anyway, thank's for trying.
Regards
if you use notes and it works thru Spb Pocket Plus it means that this NeboPad is the problem, not your association.
nir36 said:
if you use notes and it works thru Spb Pocket Plus it means that this NeboPad is the problem, not your association.
Click to expand...
Click to collapse
Well. I've tried a lot of editors and pad programs by this time, but every time I try to open a TXT file, it comes up in PWORD. This must be something in the OS itself I belive. Or has anyone managed it to work?
At last!
Finally I've found a program that's works. It's MobilePad (nice too).
EOT
Related
Hi everyone...
Can anyone please tell me where Opera Mobile stores your favourite URL's on the device? I've been using Internet Explorer and have all my mobile favourites synced with my desktop. However, I've just purchased an HTC Touch Diamond and have started using Opera which is pre-installed. I can't find an option to import my favourites though.
I was going to move them manually, but I can't find where Opera stores them. Any help would be much appreciated, Thanks.
http://forum.xda-developers.com/showthread.php?t=417251&highlight=Opera
File can't be found?
it's an xml file and is called
opera*.adr
... unfortunately, I have no such file anywhere. I'm using Resco Explorer set to show all files. I have found an Opera9 folder in the Windows root folder, but I cannot see anything in here either.
Any further help would me much appreciated. Thank you.
... have I got you all stumped on this one?
grahamkdt said:
it's an xml file and is called
opera*.adr
... unfortunately, I have no such file anywhere. I'm using Resco Explorer set to show all files. I have found an Opera9 folder in the Windows root folder, but I cannot see anything in here either.
Any further help would me much appreciated. Thank you.
Click to expand...
Click to collapse
Go to \windows\Opera9\
Look for OPERA6.adr and edit it with pword or other editor as you want. If your are using the newest version of Resco Explorer, you can view the content of each file with the context menu
... thanks my friend. I have True Text installed, so I've edited the file with that application. I'm surprised Opera hasn't got an "Import Favourites" option. Seems very strange to me?
Thanks again
I have an edited htchomesettings.xml that i want to put on my jade.
Everytime i try to drag 'n drop this file into my windows folder, i get the 'acced denied, be sure the file isn't read-only, in use or that you have enough space left'-error.
When looking at the file's properties (with Resco or total commander) it seems to be fixed in the Rom and i think that's the reason i can't overwrite it.
I already googled it and found some topics concerning this problem, and generally they all give the same advice:
http://forum.xda-developers.com/showpost.php?p=2736263&postcount=500
the problem is, i already used both programs, and apparently it does not seem to work, or i'm doing it wrong or i'm overlooking something...
So, can anyony tell me how to overwrite this file with total commander or resco, if this is possible.
Many thanks, and sorry if this is a stupid question, i searched the web for about 3 hours before asking you guys .
It's a little easier than that. The only thing you need to do is make sure that the plugin is not running. In other words, deactivate the plugin in the Settings menu. Then, do a soft reset, just to make sure that the system has stopped using it. Then you can copy and paste with any program that you like. I have found that using a PC (via ActiveSync) works best. Good luck!!
Thanks for the quick reply thunder.
Unfortunately, it did not work out. I deactivated TouchFlo already (and did the reset). And still it gives me the same error.
"Cannot copy HtcHomeSettings. Make sure your device has sufficient memory, that the file is not set as read-only, and that you have permission to copy this file type"
This time I simply used Active sync as you told me.
Again, does it have something to do with the fact that this file is hardcoded on the rom?
rubain013 said:
Thanks for the quick reply thunder.
Unfortunately, it did not work out. I deactivated TouchFlo already (and did the reset). And still it gives me the same error.
"Cannot copy HtcHomeSettings. Make sure your device has sufficient memory, that the file is not set as read-only, and that you have permission to copy this file type"
This time I simply used Active sync as you told me.
Again, does it have something to do with the fact that this file is hardcoded on the rom?
Click to expand...
Click to collapse
Unfortunately, if it is built into the rom, you will probably have a hard time copying over it. Have you tried to edit the file directly on the phone? I believe that there are a few xml editors for ppc floating out there, you could try that. Also, is there anything in particular that you want to do that requires you to modify the xml? Reason I am asking is because you could use M2D Customizer if you are only looking into modifying some settings. Hope this helps...
Allright, found out how to overwrite it!
Made a .m2dct file containing my preferred theme and settings, then i edited the included HtcHomeSettings.xml file.
Then i used the M2D customizer to load the .2mdct file, and that worked perfectly.
Thanks for the hint, Thunder!
Guys,
I have a load of internet shortcuts (bookmarks) on my PPC under Windows\Favorites which are read by PIE and are displayed on QuickMenu however!...
When I try and run one of these files and choose either PIE or Opera, I get in the address bar (url) the location of the file and not the website it supposedly points to.
If I choose the favorite from within PIE then all is well. Strange!!!
I've been looking for an answer for a while now and am drawing a blank.
Please someone help. I'm starting to get a headache
Oh, I should probably tell you I have WM6.1 Pro (HTC Touch HD).
Thanks
Wayne
Windows Mobile doesn't read ".url" file naively. The files you are messing with are resourse files for the browsers (the browsers pull information from the file, you can't push the information by clicking them) There are programs that open your 'internet favorites" (m2d, ultimate launch, and "Interent link launcher")
Thanks for the reply joel2009!
Is there an app that I can install that can handle the .url file type and run the browser with the url from the file?
Anyone able to answer this?...
quickmenu loads as favorites, the contents of the favorites folder inside the windows directory. Now if I delete this favorites folder from the windows directory, on Quickmenu, all I'm left with under favorites is a few Opera shortcuts that load Opera and do work.
Any ideas where these Opera favorites are found so I can manually add to this list?
Thanks for your help!
Wayne
interent link launcher uses mortsript to open internet link files (i'm not sure of the extension, i haven't had time to try it yet)
On the opera favorites, opera asks you where you want to save the bookmark file too when you create one.
Come on guys.....
I've found this and if you go down the list and find \urlfile\Shell\Open\Command : REG_SZ it shows the necessary registry entry that is needed to run a url file from explorer and when run this file opens within IE correctly.
There must be a command switch that follows OPERA9.EXE or OPERAL.EXE that interprets the file correctly and opens the web page.
For now I've got it set to open files in to IE. Not great but nearly what I want.
(I posted about this last night, but it got lost -- apologies if the old one comes back and I look like I've posted twice.)
I worked out a solution to this problem, and posted it up at ppcgeeks. You have to install mortscript, but otherwise it's not too bad, and has been working flawlessly for me.
http://forum.ppcgeeks.com/showthread.php?t=62816
Hope it helps.
I have SKTools, Total Commander, and Registry Key Editors.
I tried setting up file associations to open URL files, but it doesn't work. Only PIE opens the URL files by default.
Can I get the instructions to open URL files with Opera Browser?
Bump, please help me.
This is my 1st bump.
Bump, please help me.
This is my 2nd bump.
As far as I know you can set up thatparameters typing opera:config on your device
Hope it helped,
So do you mean the file associations parameters should be "opera:config"?
URL associations are set up by the app you're using.
if opera is defined as your default browser any url you'll open will automatically pop opera up.
Okay, I am using File Explorer and Total Commander. I want to Open .url files with Opera, it opens with PIE instead.
How do I open it?
What is a "default calendar"?
When I set URL file association for Total Commander, the link does not go online, instead it brings me to an error page. Under the URL box in Opera Browser, it would not show www.google.com, instead it would show something like: storage card/%mystuff/%20favorite links
So if I copied a google.com url into my phone storage card, I want to open it and GO ONLINE with Opera Browser NOT PIE. How do i do this?
PLEASE DOWNLOAD THE ATTACHMENT, SO YOU GUYS KNOW WHAT KIND OF FILE I AM TALKING ABOUT.
meant browser.. not calendar.
when you setup a default browser it will open up all urls in it... automatically
nir36 said:
meant browser.. not calendar.
when you setup a default browser it will open up all urls in it... automatically
Click to expand...
Click to collapse
I used Xperia Tweak to setup Opera Browser as my default browser, I still open google.url and it opens with PIE.
My basic file program is Total Commander.
BTW I am not talking about Microsoft Windows. I am talkin about Windows Mobile, and the phone I use is the Xperia X1.
Why is everyone giving me confusing answers. I'm getting more and more confused.
I have looked extremely hard for file associations for opera browser, and this is what i got:
http://forum.xda-developers.com/showthread.php?p=1714441
I do not use morthscript though, and I'm afraid digging into will cause me to factory reset my phone again, and I have rest my phone 10 times already.
Please, tell me if there is any other way to Open URLs via Opera Browser.
I have this program which i downloaded ages ago. I cant remember where i got it from, so im just uploading it myself. Just to clarify, this is NOT my program.
You know how on a pc, you can right click and select "Open with"?
Well, this cab brings that to pocket pc's
Hope it helps
Yeah this is exactly what I was looking for. The thread link from one of my posts also talks about "open with" method. But I don't want to use mortscript.
If your cab is not going to work, I guess I will give up searching for a solution.
Anyways thanks, you are my miracle!.
Here is an update:
Nope... it opens Opera Browser but than it doesn't go to the website (the same exact thing happens if I set file associations for Opera, and the same exact thing still happens if I use the registry editor to change association values, xperia tweak doesn't work, total commander built in file associations doesn't work, sk tools file associations doesn't work either).
I GIVE UP
Registry settings
Hi
Registry settings where file defaults are is:
Hot Key Classes Root.
In this directory there are hundreds (or more) keys relating to all the different file extensions that are associated with programmes, etc. You need to look for:
.htm
.html
htmfile
htmlfile
There may be others. Basically if these keys exist the values you're looking for are the ones with the browser executable listed in them, for example opera9.exe/operaL.exe, iexplore.exe.
I hope that helps
andrew-in-woking
poetryrocksalot said:
I have SKTools, Total Commander, and Registry Key Editors.
I tried setting up file associations to open URL files, but it doesn't work. Only PIE opens the URL files by default.
Can I get the instructions to open URL files with Opera Browser?
Click to expand...
Click to collapse
as i see it you ar not talking of .htm or .html files.
You are talking off .url File's
normaly (xp) they are handled by the protocol handler
in wm6.1 there is no such thing and it is directly handeled by iexplore
opera wil not handle these i gues
you need to find a app that reads the urlfile an launh the app with the correct parrameters
you also need this
\hkcr\http,URL Protocol,
\hkcr\http\shell\open\command, ,"\windows\operaL.exe" %1
\hkcr\https,URL Protocol,
\hkcr\https\shell\open\command, ,"\windows\operaL.exe" %1
or you can try http://sourceforge.net/projects/jzsmartmort
(I posted about this last night, but the message got lost in some backup snafu. So I'll post it again. Apologies if they both end up here.)
I hacked together a solution to this problem, and posted it at ppcgeeks.
http://forum.ppcgeeks.com/showthread.php?t=62816
It involves installing Mortscript, and having it handle passing the links to Opera. Seems to be working perfectly for me so far. Hopefully my instructions are not too convoluted. Enjoy.
I've associated the program with my files (pics/.mp4) but when I click on them to open from TC they don't open they go to album view then I have to navigate back to them. Is there a fix?
you mean thru M2D?
no in Total Commander or File Explorer, also I wanted to create a shortcut to automatically open a file when I click it, but instead it open album in libary/album mode
get SKTools and got to file associations menu. SKTools is not FREE. Buy It! I am not promoting you to get warez!
Well, all associations can be performed thru Adv. Config. (or as mohamed offered, SKTools, tho it'll expire at some point).
I know some people had problems with associations using TotalCommander
try resco explorer AFTER associating using one of the above applications.