Hey everyone, I was rooting lately and everything was going fine until just now. I recently downgraded to rc33 lite to get themes to work just to try out. Upon my surprise edge/3g network went out on me and no calls would go through. So I booted up the recovery manager did a wipe and tried to flash back jf rc33 1.42 now I'm stuck at the sign in/registration screen because there's no internet connection. Can anyone please try to help me??
xxoneromey said:
Hey everyone, I was rooting lately and everything was going fine until just now. I recently downgraded to rc33 lite to get themes to work just to try out. Upon my surprise edge/3g network went out on me and no calls would go through. So I booted up the recovery manager did a wipe and tried to flash back jf rc33 1.42 now I'm stuck at the sign in/registration screen because there's no internet connection. Can anyone please try to help me??
Click to expand...
Click to collapse
Have you tried reflashing the RC33 radio?
It would seem that T-Mobile might be having some issues with their data.
There are a couple of threads already about people not having data connections. I would hang tight for a few hours to see if it clears up.
Related
Just updated JF1.41. Everything seemed perfect, but I found I couldn't download anything from Market, and couldn't see any clips from your tube either. I am able to see the previews in both...it's odd. If I changed wifi to GPRS, everything went back to good..I really did some modificaitons on IM. But even I copied back the original files, the problem still existed..I don't know if I can flash the official build back to fix this??
for me it works with jf 1.4.1. the only issue I have so far is that snapphoto does not recognize my sd anymore (see my other thread).
Before going crazy and flashing back to RC29, try doing a full wipe and see if that fixes the problem.
nickwinn said:
Before going crazy and flashing back to RC29, try doing a full wipe and see if that fixes the problem.
Click to expand...
Click to collapse
Agreed. flashing the nbh is a bit.. extreme . Additionally, flashing the nbh is riskier than wiping or re-applying the JFv1.41 update. Flashing the nbh could potentially brick your phone, doing a wipe or re-applying the JFv1.41 update doesn't touch the bootloader, so it is much much safer.
I had to reboot my phone before downloading anything from the market but I think it was because of bad reception. I say first reboot it, if it doesn't help -wipe it.
I found that I had to log into Gmail to setup the phone and log into the market via GPRS and download one program before I could download reliably via WiFi.
JesusFreke said:
Agreed. flashing the nbh is a bit.. extreme . Additionally, flashing the nbh is riskier than wiping or re-applying the JFv1.41 update. Flashing the nbh could potentially brick your phone, doing a wipe or re-applying the JFv1.41 update doesn't touch the bootloader, so it is much much safer.
Click to expand...
Click to collapse
Actually, I had done the wipe and re-applied the JFv1.41 update many times, but that didn't work for me. I knew I did something wrong, but I just didn't know how to undo what I had done...What I had done is that I deleted [email protected]@[email protected], and applied another version of this file in order to make my MSN work with others carriers except Tmobile in GRPS mode.
Anyone else with this problem on ADP1.1? I cannot even access the internet with WIFI any longer. I have deleted NOTHING, done a wipe, and prior to installing anything, tested it again. No dice
maybe a silly question, but those help me too, sometimes...
did you re-enter your wifi settings? they are wiped, too.
sputnik99 said:
maybe a silly question, but those help me too, sometimes...
did you re-enter your wifi settings? they are wiped, too.
Click to expand...
Click to collapse
I was about to smack you upside the head (interwebz style) but I have done stupid stuff before like that and realized it would be unjustified. Yes, my settings are all good. I am connecting with WPA-PSK
I don't think it has a lot to do with the 1.41 biuld. I'm still using 1.31 and just recently I've started having this same issue. I have no clue why this is happening, all used to work fine about 1 1/2 weeks ago????
Well, I tried to root it using the latest rc33 one... but now I have no service, so I can't even get passed the google register screen...
what do I do?
what version are you running now?
rc33, the update went fine. But now I'm stuck at google registration
Did you update the radio as well? I would also try pulling the sim card and then put it back in. Sounds stupid but has worked for me on other phones.
is there any way i can unroot it? maybe that would work?
sorry but im not very savvy when it comes to all these things.
no service? or no edge connection? Maybe you can try by editing the APN.
On the google registration screen, press "menu" on your phone and then tap "APN Settings". You can modify an existing one or you can add a custom APN.
try reflashing the RC30 firmware and see if that fixes it. if it does, then try for the RC33 one again. Mine messed up first time and a simple wipe and reflash seemed to sort it out.
As you were asked before you need to install the radio as well.
On every haykuro build that I install, no matter what, it will either get stuck on the G1 screen or android/htc screen during boot after a restart.
I have reflashed my phone to RC29, re rooted, re installed JFRC33, and then tried updating from there 3 times and still I get the same problem.
It is really pissing me off now because it makes no sense that it won't work for me but it does for everyone else.
here is a log of the phone during the hanging G1 screen
http://pastebin.com/f58ba7818
haykuro said it is the new build.prop that is causing my problems but why would it only affect me and no one else?
If anyone has any idea of what is wrong, please suggest what to do.
JUST FYI
Yes, I did wipe before installs
Yes, I have completely reflashed my phone to RC29 and then re-rooted
Yes, I have checked the MD5 sums of all the files I use
It's unbelievable annoying.
Thanks in advance to anyone that can help.
Wait a little linger!
k when flashing to the haykuro builds the first couple time it takes a little to boot. your not waiting long enough. I almost took my battery out to start over again when bam the htc boot screen appeared. Trust me re root your phone from RC29 and add the 5.02h build and you will be all set I promise. you don't have to add Jf 1.42 RC33 build first. Once you get all set then update the radio. Hope I helped!
Well I waited well over 3 hours before and it was still hanging. and the output from the log looks like the build.prop is causing it to crash.. but I don't know why. I have flashed the recovery.img and I know that I am using test keys.
Payne IV said:
On every haykuro build that I install, no matter what, it will either get stuck on the G1 screen or android/htc screen during boot after a restart.
I have reflashed my phone to RC29, re rooted, re installed JFRC33, and then tried updating from there 3 times and still I get the same problem.
It is really pissing me off now because it makes no sense that it won't work for me but it does for everyone else.
here is a log of the phone during the hanging G1 screen
http://pastebin.com/f58ba7818
haykuro said it is the new build.prop that is causing my problems but why would it only affect me and no one else?
If anyone has any idea of what is wrong, please suggest what to do.
JUST FYI
Yes, I did wipe before installs
Yes, I have completely reflashed my phone to RC29 and then re-rooted
Yes, I have checked the MD5 sums of all the files I use
It's unbelievable annoying.
Thanks in advance to anyone that can help.
Click to expand...
Click to collapse
Don't know if this will help but, have you tried completely reformatting your sdcard and trying again, or preferably trying a different card? I have problems flashing when using my 8gb card, yet the 1gb card that came with the phone works fine..
Payne IV said:
On every haykuro build that I install, no matter what, it will either get stuck on the G1 screen or android/htc screen during boot after a restart.
I have reflashed my phone to RC29, re rooted, re installed JFRC33, and then tried updating from there 3 times and still I get the same problem.
It is really pissing me off now because it makes no sense that it won't work for me but it does for everyone else.
here is a log of the phone during the hanging G1 screen
http://pastebin.com/f58ba7818
haykuro said it is the new build.prop that is causing my problems but why would it only affect me and no one else?
If anyone has any idea of what is wrong, please suggest what to do.
JUST FYI
Yes, I did wipe before installs
Yes, I have completely reflashed my phone to RC29 and then re-rooted
Yes, I have checked the MD5 sums of all the files I use
It's unbelievable annoying.
Thanks in advance to anyone that can help.
Click to expand...
Click to collapse
you probly have a low class memory card and they are slow So it may take a while.....like the post above says swich cards and yull be alrite
Well I'm not using apps-to-sd.. would the sd card still affect it? I'm able to install the port fine and set it up, but after it reboots is when it gets stuck on the G1 screen.
yess it would because it is updating the system from the card
I tried again with my freshley formatted 1 GB card that came with the phone and still I get the hanging G1 screen.
I really don't think it has to do with the SD card, I think that it's something else.
bump.. anyonee?
have u updated to the new SPL and radio images that are on his site?
My devphone hangs for me on the Android startup. Now I can't do anything other than fastboot.
Bootloader: 0.95.3000
Baseband: 2.22.19.23
I can't even recover to any of my previously working firmwares because my baseband version isn't 1.22.14.11. I'm stuck!
Fixed the problem with an Alt-W wipe at the recovery console.
Yes I have updated the radio and the SPL but still the problem persists. I did a complete re isntallation of DREAIMG.nbh with the 1 GB card that came with the phone (after I formatted the card) and then rooted, isntalled the modified recovery.img, then I installed 5.0.2 again, and I still got the same result.
I really don't understand.
I really wish someone knew how to fix this I miss those soft keyboards.
Hey everyone,
I just saw my phone said there was an update and with out thinking hit download and install. After a little while my phone turned off and rebooted but went into twrp. And when ever rebooting my phone goes straight into twrp. Im on stock and rooted with just a few things uninstalled. Can anyone help me out with what to do thanks!
magestic1995 said:
Hey everyone,
I just saw my phone said there was an update and with out thinking hit download and install. After a little while my phone turned off and rebooted but went into twrp. And when ever rebooting my phone goes straight into twrp. Im on stock and rooted with just a few things uninstalled. Can anyone help me out with what to do thanks!
Click to expand...
Click to collapse
Just had this happen to me to lol, spent the last three hours fixing everything and lost all my music because I didnt have a nandroid backup . Anyways just use this guide and revert back to stock rom http://forum.xda-developers.com/showthread.php?t=2432476. You'll lose root and I think I've also lost recovery but its better than just have a $600 brick.
Hi guys! I need some assistance with my M8. A couple of months ago, I traveled to Ontario for work. I had to get the Canada/Mexico plan added to my account for that trip. I put the phone into airplane mode during the trip there, and then when I got there, turned off airplane mode. I had no service there!
So I went into my phone settings and changed some of the network settings until I finally got it to work. But only had 3G. Did my thing for a week and then returned back to Utah. Changed my settings back and got 4G again.
A couple of weeks ago, I went to San Francisco for a vacation. Airplane mode during the flight. Landed in Cali and turned off airplane mode. No 4G service, only 3G. Didn't think much of it since I was on Vacation and didn't need the phone much. Vacation over, get back to Utah and still no 4G. I cannot get this phone to get an LTE connection no matter what I have done.
Things I've done:
Fiddled with the network settings. Nothing seems to work.
Factory Reset several times.
Changed my ROM from DigitalHigh's to Neo's Port.
Got a new SIM card.
Reflashed my firmware with the same version (Latest version) that was already on it.
So I'm out of ideas. What would cause me to lose 4G and not get it back?
What should I try to do next?
veyec said:
Hi guys! I need some assistance with my M8. A couple of months ago, I traveled to Ontario for work. I had to get the Canada/Mexico plan added to my account for that trip. I put the phone into airplane mode during the trip there, and then when I got there, turned off airplane mode. I had no service there!
So I went into my phone settings and changed some of the network settings until I finally got it to work. But only had 3G. Did my thing for a week and then returned back to Utah. Changed my settings back and got 4G again.
A couple of weeks ago, I went to San Francisco for a vacation. Airplane mode during the flight. Landed in Cali and turned off airplane mode. No 4G service, only 3G. Didn't think much of it since I was on Vacation and didn't need the phone much. Vacation over, get back to Utah and still no 4G. I cannot get this phone to get an LTE connection no matter what I have done.
Things I've done:
Fiddled with the network settings. Nothing seems to work.
Factory Reset several times.
Changed my ROM from DigitalHigh's to Neo's Port.
Got a new SIM card.
Reflashed my firmware with the same version (Latest version) that was already on it.
So I'm out of ideas. What would cause me to lose 4G and not get it back?
What should I try to do next?
Click to expand...
Click to collapse
First thing I would try is to flash the stock recovery and then perform a factory reset from the bootloader. You can take a nandroid before and restore right after to be right back where you started but hopefully with 4g.
Need some help .
My software number on verizon htc one m8 is 3.28.605.4 , i wanted to update via phone system update > check new , but its not happening .
Please let me know how i can update my software manually .
Thanks
Risay056 said:
My software number on verizon htc one m8 is 3.28.605.4 , i wanted to update via phone system update > check new , but its not happening .
Please let me know how i can update my software manually .
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/verizon-htc-one-m8/general/vzw-m8-master-ruu-firmware-collection-t2946473/page11
cntryby429 said:
First thing I would try is to flash the stock recovery and then perform a factory reset from the bootloader. You can take a nandroid before and restore right after to be right back where you started but hopefully with 4g.
Click to expand...
Click to collapse
Thanks Cntry. I was headed in that direction and had already downloaded a stock recovery. I'll work on it more this weekend.
Do I need to flash the stock Hboot.img and boot.img as well?
Never mind about the last question. I just finished working on the phone. After getting the stock recovery flashed, and doing the factory reset, i got the 4G signal back!!! Thanks for the help Cntry!!! And to Santod and everyone else that has done all of the hard work of getting all the tools and files in place so that I could do this tonight!