Related
I asked this question yesterday in the middle of other ones, and perhaps because of that, I didn't get any answer to it, however, people helped me with the other ones.
What I want to know is how I can extract my actual ROM and Radio in order to came back to it if I have any issues flashing a new ROM. My actual ROM is 1.82.707.0 WWE (11/03/07) and my Radio is 1.27.15.32. The problem is that nowhere is a place where I can download it beacuse it doesn't exist in the page where all the ROM are. So, I think the only way to get it is extracting it from the phone.
So, 2 ways: The first is if someone can help me in the steps I have to follow to extract them from the phone (ROM and Radio) and the other way is if someone can give a link or a place where I can download it. Any of them would permit me to have something that make me sure I can go back to this state. I'm afraid that if I change the ROM and Radio I won't be able to use my phone again with my company, and because I'm in Argentina there in no service for HTC phones here.
Thank you a lot.
Guido.
guido_7701 said:
I asked this question yesterday in the middle of other ones, and perhaps because of that, I didn't get any answer to it, however, people helped me with the other ones.
What I want to know is how I can extract my actual ROM and Radio in order to came back to it if I have any issues flashing a new ROM. My actual ROM is 1.82.707.0 WWE (11/03/07) and my Radio is 1.27.15.32. The problem is that nowhere is a place where I can download it beacuse it doesn't exist in the page where all the ROM are. So, I think the only way to get it is extracting it from the phone.
So, 2 ways: The first is if someone can help me in the steps I have to follow to extract them from the phone (ROM and Radio) and the other way is if someone can give a link or a place where I can download it. Any of them would permit me to have something that make me sure I can go back to this state. I'm afraid that if I change the ROM and Radio I won't be able to use my phone again with my company, and because I'm in Argentina there in no service for HTC phones here.
Thank you a lot.
Guido.
Click to expand...
Click to collapse
Here's what you're looking for:
http://forum.xda-developers.com/showthread.php?t=334680
And Radio: http://forum.xda-developers.com/showthread.php?t=359015 (should work, or try QMAT by ViperBJK)
Ta
Dave
will any of this work with the myTouch? im in the US and have one, but havend done anything to it yet. I have a rooted G1, would i be able to use the same JF software? if these are all dumb questions, dont tell me. lol
I was just going to post about this. I cannot seem to get any of the rooting methods to work with this phone. Here is the info:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.19.261
May 27 2009, 19:06:41
Any help would be appreciated.
You can't root the MyTouch 3G due to what haykuro described as a "perfect" SPL.
That's true. Haykuro is saying that it is the perfected SPL on his blog. Don't fret everyone as this just makes dedicated hackers like Haykuro more interested in being the ones to root it.
Go Haykuro Go!!!! I know you've put in hours upon hours of hard work rooting our beloved devices and moving us forward in the field.
Thanks.
That doesn't mean I forgot others who have put hard work in. I just wanted to let Haykuro know as he has been missing from our scene because of the poor treatment or lack of credit when due.
I'm not sure you comprehend what the SPL is since its not as clear for Android as it is for WinMo. The SPL allows you to overwrite the entire system and the modified SPL's allow you to flash unsigned. Now the SPL resides in a part of the device that stores other vital low level software like the radio and such.
In order to flash the SPL, the new SPL has to take the same exact place as the old one using the same exact memory addresses or else it will overwrite the other vital low level like the radio and one incorrect byte in the wrong place could cause you to be unable to make calls, etc.
This is where it gets to be a pain in the ass because the SPL is what allows you to write to low level parts of the phone and more importanly use the USB port as a serial port. If the SPL is flashed badly and you can't communicate via USB anymore you now have brick unless you know JTAG. Another problem is if the radio or anything else overwrites part of the SPL causing a brick.
In other words you will probably be able to achieve root via a software exploit but if the SPL cannot be replaced then you will never be able to flash a new ROM.
Hope that helps. sry for being so long winded
how about after achieving root (via software exploit), we replace the recovery.img with a modified one via adb shell? Is that possible?
(n00b here)
The SPL will not allow it to be written although there may be a solution like fakesigning ROMs using some sort of security hole.
like previously mentioned the SPL will not allow it. So until a great mind like Haykuro finds away of replacing the SPL with a modified one not in an update.zip or a fastboot flash it will not be posible till then. Maybe a nbh file might be possible but currently there is not one that is available for this device yet.
nope cuz .nbh = updates.zip for winmo and works almost the same way
mytouch
rogers started a fund raiser i think we need to start another one?
Has anyone tried using a Goldcard to flash Dreaimg.nbh or another system image? It's been done on the Dream, I don't see why it would be any different on the MyTouch.
Someone needs to figure this out. This is the only thing keeping me from buying a MyTouch. Someone help free me from my loose hinges and inexcusable lack of system memory on my dream...
I'm not sure where to post this thread, I'm picking here because I believe if I can be helped, it'll be by the people here. This morning I followed the guide posted by Haykuro to get "real" root on the Rogers. However, I made the most basic mistake of noobdom and didn't bother to check that this was for my phone. It's not, it's for the Dream. I can still boot into fastboot, but through the guide I flashed the new radio which I think is completely incompatable with the Magic, so to start, could someone post the original Rogers radio? Please don't clutter up the thread with "ur an idiot" type posts, trust me, you can't possibly call me anything I haven't called myself for the past half hour. I want to punch myself in the face, but I'm a bleeder.
Here is the post http://forum.xda-developers.com/showpost.php?p=4271500&postcount=1
Here are the SPLs. But I'm not sure that will help you out, I think you may have to send it in.
Clinton
Thanks, I don't think those contain radio.img though, unless I'm wrong?
If you can still get into fastboot your best bet is probably to restore a nandroid backup from someone's untouched rogers handset.
that should fix everything and reset your phone to how it was.
I have the wiped nandroid backup posted by Skittleguy on my computer, so I'll try that in a few and post my results shortly.
Restoring the Wiped Nandroid Backup didn't work, I don't think that it's updating the radio, which is why I think that if I flash the original radio back first and then do the tutorial again using a Magic recovery, that I might be okay. I'm just thinking out loud here though.
So wait, do you own a Rogers Magic (32A)? If you do, then it should work (using it right now as a matter of fact). Just make sure that you use a 32B compatible recovery.
What should work? The wiped nandroid backup?
Reflashing the radio. From what I understand, this root method essentially turns the Rogers phone into a "32B" Magic. You still have all the memory and goodies, but you should now be able to flash any 32B rom onto your phone. And for that reason, you need to use the 32B compatible recovery and then you can flash any 32B rom.
And for future reference, Nandroid does not back up your radio. To the best of my knowledge, there is no way of getting the Rogers radio unless you probably do some hardware modding.
Edit: Post 100!
Alright, I'm flashing a 32B Rom as we speak.
Okay, my phone flashed, and it's working just fine with a 32B Rom. Although now, I wonder what I did, because it wouldn't boot before. In the mad dash that has been the last hour, I'm sure (obviously) that I did something wrong, but I don't know what. Thanks everyone for your replies, and Skittleguy especially thank you for verbally slapping me back into reality! Mod, you can lock this thread down.
Hi,
Rogers released new dream rom with a radio update.
We have 62.50S.20.17H_2.22.19.26I now
This new is:
62.52S.20.18U_3.22.20.17.
Anyone able to get it out so we can flash it on cyan latest mod rom?
Dont know exact radio version but go here for rom:
http://www.htc.com/ca/SupportDownload.aspx?p_id=269&cat=2&dl_id=654
Thanks again.
the whole dump is an nbh file that has to be flashed from the sd. Anybody know how to crack it open?
I bet it contains other fixes as well! The message on Twitter said that they fixed some bugs!
jubeh said:
the whole dump is an nbh file that has to be flashed from the sd. Anybody know how to crack it open?
Click to expand...
Click to collapse
I remember back when I had my Wizard, there was a tool to pick apart nbh images and reassemble them. But this was for Windows Mobile, a completely different platform. Perhaps the basic file formats are similar?
Use qmat. It can unpack nbhs.
Mmmm, new radio.......yummy.....I like new stuff.....wait if it is a new radio, will this be able to work for us, how to we know that this won't jeprodize us with the danger spl. I know I ain't gonna be the first to try this
gridlock32404 said:
Mmmm, new radio.......yummy.....I like new stuff.....wait if it is a new radio, will this be able to work for us, how to we know that this won't jeprodize us with the danger spl. I know I ain't gonna be the first to try this
Click to expand...
Click to collapse
my thoughts exactly...took enough balls to go for the danger SPL in the first place.
my current radio works fine, so I am not going to mess.
then again...never say never. thats what XDA is all about
Well we know the radio calls the spl and that the old radio was not able to call the hayruko spl which cause way too many paperweights so how will we know if this radio will also call it, we can assume that since it is an update would but the word assume means to make an ass out of you and me, so is there any way that this can be checked or tested numerous times before we possibly get another wave of bricks and without a cupcake over the air excuse to fall back on. Just my thoughts.
Never change a running system my father tells. Me all the time.. ;-)
Yeah but I like new stuff, I got so used to it feeling like christmas around with new stuff all the time that I got spoiled. I have had this radio and spl for 3 months now and I am bored off it. I demand something new that could cause some new widespread havoc, can't we get something that causes a self destruct if installed incorrectly, kinda jealous of those iphone 3gs users and their exploding batteries, I want something that explodes and catches fire. I demand a refund what am I paying you dev for, wait I don't pay you, nevermind forget this whole post
P.s. I am just playing
rogers is DREA210
we have mostly DREA100/110
i dont think we r able to flash it...
Hardware is identical.
So it should work OK.
Just give me radio Rom only and i will flash it asap.
drea110 here.
You can go back to default by flashing DREAIMG.nbh and then re-flash with this Rom and all will be OK.BUT YOU WILL LOOSE ROOT!
And that is why i didn't flash it yet
Am waiting for someone to give a proper radio Rom to flash.
There will always be a question about whether any new radio image (IPL) that ships will be compatible with a hacked SPL or other SPL not intended for the specific device. This new IPL could very well brick every device it is installed on when mixed with the deathSPL. I very strongly suggest that nobody tries this IPL unless they switch back to their STOCK SPL. Now that HTC has so kindly provided the kernel source needed to build custom kernels that will boot on a stock dream as provided to rogers, there is absolutely NO NEED to continue using the deathSPL phone killer.
Hey, does this nbh file carry the SPL? (it must, doesn't it?)
If it does, then you could maybe just install this and reroot.
Yes it contains spl and radio rom and os rom on it so it will put back everything on stock.
But you will loose root and as of now there is no way to root on 1.5 version.. yet.
if there is i would flash it.
Re-root leave radio and check spl version.
if newer than deathspl would leave it and flash cyanogen 4.0.4.
If not reflash haykuro new hacked spl back and then wipe and flash cyanogen 4.0.4.
And am back in bussiness with new radio and/or spl.
But rooting on 1.5 cupcake needed to do that so...
demetris_I said:
Yes it contains spl and radio rom and os rom on it so it will put back everything on stock.
But you will loose root and as of now there is no way to root on 1.5 version.. yet.
if there is i would flash it.
Re-root leave radio and check spl version.
if newer than deathspl would leave it and flash cyanogen 4.0.4.
If not reflash haykuro new hacked spl back and then wipe and flash cyanogen 4.0.4.
And am back in bussiness with new radio and/or spl.
But rooting on 1.5 cupcake needed to do that so...
Click to expand...
Click to collapse
Really REALLY WRONG!
As I rank your knowledge about SPLs,Radios and android itself with this post, you shouldn't flash this, except if you wouldn't cry and open up a thread "My G1 is dead" ;-)
maxisma said:
Really REALLY WRONG!
As I rank your knowledge about SPLs,Radios and android itself with this post, you shouldn't flash this, except if you wouldn't cry and open up a thread "My G1 is dead" ;-)
Click to expand...
Click to collapse
And you base that on what?
1.5 is rootable - look for "goldcard"
Second: This update has a different SPL - It's not an Engineering SPL.
It replaces your recovery.
And I think these Recovery and ROM wouldn't boot on a regular T-Mobile G1, because it has a different radio chip.
It's very risky to flash this, because it's from a different phone.
It's NOT the same hardware!
maxisma said:
1.5 is rootable - look for "goldcard"
Click to expand...
Click to collapse
I hope this is not a very stupid question, but why would you need a goldcard. Can't you just revert to RC29 and root you device the old and easy way?
maxisma said:
1.5 is rootable - look for "goldcard"
Second: This update has a different SPL - It's not an Engineering SPL.
It replaces your recovery.
And I think these Recovery and ROM wouldn't boot on a regular T-Mobile G1, because it has a different radio chip.
It's very risky to flash this, because it's from a different phone.
It's NOT the same hardware!
Click to expand...
Click to collapse
Of course i didn't expect it to be engineering spl, this rom are made of normal ppl to use not experiment so normal spl would be on it but maybe the same as g1 or newer.
rogers only modification was on UMTS 850 / 1900 bands the normal g1 only supports UMTS 1700 / 2100 but rogers g1 users did flash radio rom from g1 vanilla see hardspl or even haykuro's hacked spl and they work fine so why not the contrary?
After all they keep the same base versions:
We have 62.50S.20.17H_2.22.19.26I
They have 62.52S.20.18U_3.22.20.17.
If they had: 3.0008 i wouldn't bother smells from miles is not same radio hardware
But as you can see the code is identical to each other, only newer!
The hardware IS the same my friend only they dont have dvt only pvt motherboards and they all be flashed with latest haykuro's spl and radio!
If am wrong the os will load but i wont have cell reception but that is as far as it goes for a brick.
Am 99% this rom will do just fine on any pvt g1 phone out there.
As for goldcard, didnt know there is a way to root on 1.5 please enlighten me.
Is there anything to download to make this happen? ->link
if it is am more than 101% that this rom will go on my phone sweet.
After that i dont know what happens will i be able to flash haykuro spl back or i will have a brick? will it let me flash custom rom?
Over and out.
Hi folks.
I am desperate to get Cyanogens mod on my phone but I can't downgrade to 1.5 because i'm on 1.6 with a UK vodafone Magic (32B).
Any chance a serious andoid expert could step in and tell me:
Will there be a new image made to fix this issue?
is there a method I will understand? It says on the Cyanogen Wiki that there has been "some success" with my version but I can't find where it says how to downgrade for my version
I keep hearing about gold card or summink but i'm a noob and I don't have the foggiest idea where to start.
Please help!! and try to make your responses understandable
Dont worry...
Hi there
I think is possible what you're trying to do, but in order to change your rom you don't need downgrading nowadays (HTC are not PSPs, hehe).
I have a magic from Vodafone ES, and what you have to do first is check your model, can be 32A (HTC) or 32B (Vodafone, less ram in cell phone), so you'll probably have 32B like me.
After this, you need Android SDK and drivers to connect your device usb, load a modified SPL via ADB/fastboot (there's a thread in the forum with the HBOOT collection, you need one of those in your cell in order to change the rom).
Summarizing:
1. check if 32B
2. get Android SDK to use the commands fastboot/ADB
3. replace SPL
4. continue with the cyano's wiki
I followed this: http://www.htcmania.com/showthread.php?t=74683 (sorry is in spanish and a bit outdated, but the apps you need like the SDK are in there, and you have some screenshots, you can skip the root part since cyano's mod is rooted already).
About the goldcard method, I dont know because mine hadn't had perfect SPL, I only had trouble with the usb driver, and downloaded HTC sync (look for it on google if you need) and adb/fastboot detected my device.
A good idea is to install a recovery image once you change your SPL, I personally recommend Amon_RA's recovery 1.5.2.
Last but not least, these explanations are the basics, I know it sounds like chinese to you but read more posts in the forum, there's a cyanogen flashing guide as well, with all the information and these steps you'll do fine.
Hope you'll succeed, let me know your issues
I do understand reasonably well but you cannot use the guide on here with a UK magic as the SAPPH.img file or whatever has an incorrect ID. it's at this point the process cannot be completed.
Thanks so much for your lengthy reply but in this case I believe my phone is unique and the problem cannot be be as easily resolved as you suggest. I must downgrade to 1.5.
Are any of the extreme android geeks able to shed light on this?
I can shed light on you as I have a Vodafone HTC Magic 32B. I used the instructions at the link below and got my phone back to Cupcake, but oddly enough I used the MyTouch instructions and searched online for a suitable sappimg.nbh file as the one they provided didn't work for me. Now I am running Qteknology MagicSense Hero ROM with working LEDs. Forget about ADB, SDK and the Goldcard method... I am sure you want the simplest way to unroot so you can get back to 1.5 and the reroot to whatever you like. Here it is: http://theunlockr.com/2009/10/15/how-to-root-a-donut-phone-android-1-6/
This is great news but I have tried that method with the sappimg.nbh and it says incorrect ID every time.
Are you using a UK vodafone magic then? If so, where did you find a SAPPIMG that worked?
Please try and remember!
It doesn't matter that your phone is a UK Vodafone Magic.. if you google sappimg.nbh and download a few until you get the one you need you will have your phone reverted back to it original state... ready to root. If you stop your search after one attempt you will not have done all you needed to do. You don't have to know any codes or get another SD card.. just put some effort into it from your computer. Google is your friend.
but being a bit of a noob to all this, surely trying sappimg files at random might risk bricking my phone? I heard there was a good sappimg for all but my version of the phone which is why I mentioned it.
Maybe someone on here has a sappimg known to work with my phone?
But yes, i'm off to do some intense googling.
Thanks
Hi
I have a UK Voda Magic and I followed this http://forum.xda-developers.com/showthread.php?t=579328 and worked perfectly for me
It truly is lovely of you all to try and help and I appreciate it but I suspect you have not read my comments properly.
Those of you that have commented here were only able to get it to work because you were flashing from/rooting from a 1.5 cupcake build. Once the OTA 1.6 donut update is on a UK magic it cannot be downgraded and so all comments thus far are superfluous. contrary to other comments it is necessary to flash SAPPIMG.nbh first and this does not work on my phone - incorrect CID.
Is there anyone on here that can help with MY issue?
Thanks.
Strange, because I have no issues flashing UK Voda 1.6 phones, just fastboot and use ADB to load recovery image, then flash whatever 32B ROM I like (Dwangs 1.17.1 is great). I did a work collegues before Christmas and his phone had never been modified, only received the OTA update from 1.5 to 1.6 around October time.
I'm on it. That's the way I used to flash roms back when i first got my magic. Now i've been thrown by all the simple guides to put cyanogen and I thought the sappimg method was the only way. I'll just download the sdk and get on my merry way
I don't understand what the issue is? I have a UK vodafone 32B and have been flitting between CM's mods, Hero mods backwards and forwards with no issues whatsoever?
I'm on CM's latest right now (well, a few back now 4.2.11 latest), just followed the instructions and it worked....?
I certainly did read your OP correctly and I also was on 1.6 when I followed the link I posted. In that link it has instructions on how to do it if you are on 1.5 OR 1.6
Started out with 1.5 Vodafone UK Magic which i've flashed many times using the fastboot boot cm-recovery-1.4.img method.
At one time i went back to stock 1.5 but let it update itself (OTA) to 1.6. Since then i've continued to flash new ROMs without problem.
Alfieg said:
but being a bit of a noob to all this, surely trying sappimg files at random might risk bricking my phone? I heard there was a good sappimg for all but my version of the phone which is why I mentioned it.
Maybe someone on here has a sappimg known to work with my phone?
But yes, i'm off to do some intense googling.
Thanks
Click to expand...
Click to collapse
hi alfieg
ive vodafone magic 32B with donut and perfect SPL, in present day, I tried all the guides and methods in many forums, without success, for example, if you follow the guide in wiki cyano, already the first step there are problems, how I try to update with sappimg. (cupcake 1.5) as the ends' update writes "main version is older," "update failed "... if you do not then a way to get cupcake is impossible to have root on magic 32b with donut and Perfect spl ....
Indeed in the wiki says, if you have donut Downgrading to 1.5 FAILED: HTC Magic Vodafone ES (Spain) (32B) Official 1.6 updated OTA "
wait a few geek we solve the problem ...
I don't see what the problem is. You should have been reverted back to 1.5 and flashing new ROMs. The instructions are simple.. someone else has done all the hard work.. all you have to do is download a file and hold your phone.
blackvyper said:
I don't see what the problem is. You should have been reverted back to 1.5 and flashing new ROMs. The instructions are simple.. someone else has done all the hard work.. all you have to do is download a file and hold your phone.
Click to expand...
Click to collapse
download a file, to make what? If you can not root for real?
Will you lot please listen to me!
There are two methods reccommended:
1) Flash the SAPPIMG.nbh to downgrade back to 1.5 - this does not work on a UK magic on vodafone 32B at all! It reports Invalid CID, update failed!
2) use the fastboot boot cm-recovery-1.4.img via the SDK - This does not work on my phone! - I have the device listed when I use "adb devices" so the drivers are ok but it hangs at <Waiting for device> when i try to fastboot boot cm-recovery-1.4.img!!!!!! No ammount of killing the server and remounting as per the cyano instructions works!!!!! in fact, it wont let me remount (Operation not permitted)!!!
If you don't understand please don't post. People who have not updated to 1.6 OTA and people who don't have a UK voda 32B - stop posting here.
Grrrr
No need to downgrade
Alfieg said:
Hi folks.
I am desperate to get Cyanogens mod on my phone but I can't downgrade to 1.5 because i'm on 1.6 with a UK vodafone Magic (32B).
Any chance a serious andoid expert could step in and tell me:
Will there be a new image made to fix this issue?
is there a method I will understand? It says on the Cyanogen Wiki that there has been "some success" with my version but I can't find where it says how to downgrade for my version
I keep hearing about gold card or summink but i'm a noob and I don't have the foggiest idea where to start.
Please help!! and try to make your responses understandable
Click to expand...
Click to collapse
I have a New Zealand Vodafone Magic 32B and they share the same Hboot 1.33.0004 (SAPP10000) SPL with the UK (and NL and AU) vodafone phones. That means they are VERY easy to load alternate ROMs onto. The horrible stuff many Americans and others have to go through to root their phones isn't required for us.
You do need to get the Android SDK installed and talking properly to your phone.
Assuming you have the SDK set up and you can see your USB-connected phone listed when you enter the "adb devices" command, then the rest should be easy. See the Cyanogen Mod wiki for the details. You want the section on "non-Tmobile 32B magics" on this page:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
It starts with:
"Non-TMobile 32B Magics
If the above doesn't work for you, don't despair. Some non-US Magics are shipped with a fastboot compatible SPL installed. If you see 3 skateboarding androids when you boot to fastboot, you should be able to do the following:"
..............
This is the part you want to pay attention to, assuming you have the SDK installed properly. Our phones are actually MUCH easier to load others ROM on because we have those fastboot-enabled SPLs already in place and this is the first, BEST way for us to do it.
Whatever you do, do NOT flash the "Danger SPL". There is no need to for an HTC Magic with the Hboot 1.33.0004 (SAPP10000) SPL.
If you're hopelessly lost at this point, seek hands-on local help. You don't know enough to do this by yourself without risking screwing up. if no one can help you, then take your time. Learn the stuff you need to know....Being in a hurry is a great way to go wrong. I spent 3 months reading and thinking about it before I loaded my first ROM. Much of the advice is for the Dream / G1 or locked MyTouch3G or Magic 32B phone from telcos who lock them....and simply isn't relevant for the HTC Magic 32B from Vodafone. the single section I'm pointing you to above is all we need to get it done.
Finally, here is my own "simple guide" for getting loading alternate ROMs on a Vodafone HTC Magic 32B. This is about OUR phone...and should work if you work your way through it.
http://truthseekernz.blogspot.com/2009/11/simple-guide-to-loading-new-roms-on.html
You don't need to worry about "gold cards" and all that stuff. You'll be flashing an already rooted ROM and you will have backed up your un-rooted original load with "nandroid" before you change ANYTHING. That backup is your path back to the way your phone was before you rooted it by flashing an already rooted system ROM. in loading ROMs like Cyanogen's you're not baking a cake, you're buying one....so you don't need to know how to make one, you just need to know where to get one and how to serve it....if that analogy makes sense.
Simply, you start by: fastboot boot RA-recovery-1.5.2G.img:
Then, from the recovery menu of functions you do these steps:
1. Backup (nandroid)
2. Wipe system / data
3. Wipe cache
4. flash from any zip on sdcard (the one you want to flash today, you may have put several different ROM images in /sdcard)
5. reboot to brave new world.
6. Make a backup copy on your PC of the /sdcard/nandroid folder on your sdcard so you won't lose it accidentally if your sdcard is corrupted, lost or stolen.
Done.
To save time and let you backup / flash ROMs anywhere you happen to be standing, you can flash Amon-RA's recovery onto your phone or you can load it via fastboot every time and leave the default recovery in place. The very first nandroid backup you made will have backed up the factory recovery image as well as the factory system image as they were at the time you backed them up. So they can be restored if you want to at some point update them with an OTA update. I suspect Vodafone / HTC will be rolling out an Android 2.0 / 2.1 update to Magic phones at some point. If they don't that would be a black mark against them....something to remember when thinking about buying any future phone from anyone: "WILL THEY SUPPORT IT FOR THE SAME 2 YEARS YOU'VE SIGNED UP FOR".
If the answer isn't YES......then that's worth remembering. Vodafone / HTC's record so far is good. The last OTA update was barely 3 months ago.
Alfieg said:
Will you lot please listen to me!
There are two methods reccommended:
1) Flash the SAPPIMG.nbh to downgrade back to 1.5 - this does not work on a UK magic on vodafone 32B at all! It reports Invalid CID, update failed!
2) use the fastboot boot cm-recovery-1.4.img via the SDK - This does not work on my phone! - I have the device listed when I use "adb devices" so the drivers are ok but it hangs at <Waiting for device> when i try to fastboot boot cm-recovery-1.4.img!!!!!! No ammount of killing the server and remounting as per the cyano instructions works!!!!! in fact, it wont let me remount (Operation not permitted)!!!
If you don't understand please don't post. People who have not updated to 1.6 OTA and people who don't have a UK voda 32B - stop posting here.
Grrrr
Click to expand...
Click to collapse
Get latest version of fastboot binary. I had problems with original one and htc magic. Drop fastboot.exe into the sdk tools folder.
Reboot your phone holding back and power simultaneously.
Then plug usb cable.
in Dos prompt go to sdk tools folder and type "fastboot devices"
if your device is listed you are good to go.
then "fastboot boot cm-recovery-1.4.img"