Related
Hey guys i have been trying to update to RC30 and keep root access i am at the step where you need to install the test keys and im trying to boot into recovery mode and my phone just keeps flashing the G1 logo over and over and over again and it wont go into recovery mode. Any ideas ????
Are you pressing the 3 keys all at once?
Fully power your phone off. Turn it on by holding down Home and pressing Power. Continue holding Home until the recovery screen is displayed.
lmao....i meant to say 2 buttons
im having the same problem with my phone and pressing the power button and the home key doesn't work, i'm sure the first guy on this thread tried that too
If you followed those directions and it didn't work then possibly the recovery partition is damaged. For dreams without root, try applying the RC29 NBH file again.
i do have root i know this because i am able to use the droid sans app to enable auto rotate i think i may have screwed something up while gaining root access my question is now how do i go about fixing the recovery portion of the phone thanks guys
anybody have any ideas
Teidullie said:
anybody have any ideas
Click to expand...
Click to collapse
Yeah. I'd start over with this.
jashsu said:
try applying the RC29 NBH file again.
Click to expand...
Click to collapse
hay i have the same problem will try to redo the nbh
i have been able to successfully help a few others get recovery back by flashing the recovery.img again and then re-flashing the JF build they were on. try that again(the telnet step from when you rooted the phone)
My phone never updated to the 2.2.1 I am still stuck on the 2.2. I called t mobile, but they didn't do much to help. Anyone know how to help?
Sent from my HTC Glacier using XDA App
Did you try *#*#checkin#*#* ?
Sent from my HTC Glacier using XDA App
joeman55 said:
My phone never updated to the 2.2.1 I am still stuck on the 2.2. I called t mobile, but they didn't do much to help. Anyone know how to help?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Method 1 - Update.zip
http://www.filedropper.com/update2
1. Put the file on the root of your sdcard and rename it to update.zip.
2. Turn off your phone.
3. Remove the battery.
4. Reinstall the battery.
5. Hold volume down + power until you get to a white screen.
6. Use the volume rocker to highlight FASTBOOT and press power to select.
7. Use the volume rocker highlight RECOVERY and press power to select. If you see an exclamation point instead of the blue menu, you might have to press volume up or down to get into the blue recovery menu.
8. Use the volume rocker to highlight and press power to select APPLY SDCARD UPDATE.ZIP.
9. DON'T TOUCH IT UNTIL IT'S DONE AND REBOOTS ON ITS OWN.
10. You should now be in 2.2.1 with all of your data preserved.
Method 2 - pd15img.zip
This procedure will completely erase ALL of your data but it is guaranteed to work.
http://www.filedropper.com/pd15imgglaciertmous1175312radio1228b60140e26030226mrelease155771signed
1. Put the file on the root of your sdcard and rename it to pd15img.zip.
2. Turn off your phone.
3. Remove the battery.
4. Reinstall the battery.
5. Hold volume down + power until you get to a white screen.
6. Let the phone "detect" the update. You might have to use the volume rocker to highlight the option and press the power button to select.
7. When the phone is ready, use the volume rocker to highlight and power button to select BEGIN UPDATE.
8. DON'T TOUCH IT UNTIL IT'S DONE AND REBOOTS ON ITS OWN. THIS MIGHT TAKE A WHILE.
9. You will now be on a clean install of Android 2.2.1. Enjoy.
Thank you Phateless!
I've just bricked my phone this afternoon, and been looking for some noob way for recovering it.
It is all because I rooted this phone and might delete some critical apks that caused my phone lost its desktop/main screen.
Doesn't PD15img kill WiFi?
If you read the How To Root. . . thread carefully you will see that PD15img is only partially 2.2.1 and more has to be added to get a full install of 2.2.1 with working WiFi.
After waiting more than a week for an automatic update after I got my phone, I tried the PD15img thing without reading all of the posts and only too late discovered that my WiFi didn't work and a lot more had to be done to get it back. And it appears that PD15img can't be undone. I had decided to take the phone back for an exchange but. . .
That very night TMo did an automatic update from my incomplete 2.2.1 to real 2.2.1, which fixed the problem.
I didn't get the phone from TMo directly and I never gave them my IMEI. I wonder if the automatic update was just luck or PD15img had something to do with it.
Thank you.. My phone hasn't been rooted yet, but I'll give that a try. I hope it's a full update.. That'd suck if my wifi didn't work...
Sent from my HTC Glacier using XDA App
raphael888 said:
Thank you Phateless!
I've just bricked my phone this afternoon, and been looking for some noob way for recovering it.
It is all because I rooted this phone and might delete some critical apks that caused my phone lost its desktop/main screen.
Click to expand...
Click to collapse
Glad I could help!
ecdy said:
If you read the How To Root. . . thread carefully you will see that PD15img is only partially 2.2.1 and more has to be added to get a full install of 2.2.1 with working WiFi.
After waiting more than a week for an automatic update after I got my phone, I tried the PD15img thing without reading all of the posts and only too late discovered that my WiFi didn't work and a lot more had to be done to get it back. And it appears that PD15img can't be undone. I had decided to take the phone back for an exchange but. . .
That very night TMo did an automatic update from my incomplete 2.2.1 to real 2.2.1, which fixed the problem.
I didn't get the phone from TMo directly and I never gave them my IMEI. I wonder if the automatic update was just luck or PD15img had something to do with it.
Click to expand...
Click to collapse
You're thinking of the OLD pd15img.zip that was part of the procedure to undo the OTA update. The one I linked to is the NEW one posted by Football that completely restores to 2.2.1 without issue. NEW radio, NEW SPL, NEW software.
I tested it on two different phones and everything worked perfectly.
You were thinking of this method.
http://forum.xda-developers.com/showthread.php?t=832642
I posted the file from this one. Ignore the part about gfree.
http://forum.xda-developers.com/showthread.php?t=863899
raphael888 said:
Thank you Phateless!
I've just bricked my phone this afternoon, and been looking for some noob way for recovering it.
It is all because I rooted this phone and might delete some critical apks that caused my phone lost its desktop/main screen.
Click to expand...
Click to collapse
If all you did was delete the wrong APK and it can be restored by flashing a stock image, it certainly is not bricked by any means.
TeeJay3800 said:
If all you did was delete the wrong APK and it can be restored by flashing a stock image, it certainly is not bricked by any means.
Click to expand...
Click to collapse
People definitely use that term way too loosely on xda... lol
NRGZ28 said:
People definitely use that term way too loosely on xda... lol
Click to expand...
Click to collapse
Most people don't know what brick even is they do something wrong and think they bricked it lol I remember in HD2 forum someone did BINFS format and didn't flash rom manually thought he bricked it cause he had no rom installed and only stuck on bootloader. So told him to just flash using LeoCustomRRU as he could do task29 and flash.
BTW NRGZ28 thanks for cooking NRG roms bro loved your 6.5.X work specially the whole 29XXX base as it was most stable and fast to bad HD2 is stolen.
ForceUpdate
I would check out these instructions
----> http://forum.xda-developers.com/showthread.php?t=843428
Hmmmm, NRG creeping around in a android thread....
Phateless said:
Method 1 - Update.zip
http://db.tt/oDkWb2k
1. Put the file on the root of your sdcard and rename it to update.zip.
2. Turn off your phone.
3. Remove the battery.
4. Reinstall the battery.
5. Hold volume down + power until you get to a white screen.
6. Use the volume rocker to highlight FASTBOOT and press power to select.
7. Use the volume rocker highlight RECOVERY and press power to select. If you see an exclamation point instead of the blue menu, you might have to press volume up or down to get into the blue recovery menu.
8. Use the volume rocker to highlight and press power to select APPLY SDCARD UPDATE.ZIP.
9. DON'T TOUCH IT UNTIL IT'S DONE AND REBOOTS ON ITS OWN.
10. You should now be in 2.2.1 with all of your data preserved.
Method 2 - pd15img.zip
This procedure will completely erase ALL of your data but it is guaranteed to work.
http://db.tt/peYZBi5
1. Put the file on the root of your sdcard and rename it to pd15img.zip.
2. Turn off your phone.
3. Remove the battery.
4. Reinstall the battery.
5. Hold volume down + power until you get to a white screen.
6. Let the phone "detect" the update. You might have to use the volume rocker to highlight the option and press the power button to select.
7. When the phone is ready, use the volume rocker to highlight and power button to select BEGIN UPDATE.
8. DON'T TOUCH IT UNTIL IT'S DONE AND REBOOTS ON ITS OWN. THIS MIGHT TAKE A WHILE.
9. You will now be on a clean install of Android 2.2.1. Enjoy.
Click to expand...
Click to collapse
I followed the guide you gave me since i was using an obsolete one and it worked perfectly. My phone says its on 2.2.1 but it doesnt feel like i am.... i remember after my update the market app was completely different, it has this half circle kind of look to it where it featured some popular apps. this version of 2.2.1 doesnt have that. is there any specific reason for that or am i missing something?
thanks again for your help!
The market update itself was a separate update "just to the market app" than 2.2.1. I had to force 2.2.1 on my phone early on; market came later. You should be able to find it in the apps/themes section, or just give it time and it should update itself.
Great post but I really need help.
I guess my phone is from some other batch or ... who know these chinese these days.
Anyways my menu is just different from described.
as folllows:
HBOOT screen
FASTBOOT (gets me to FASTBOOT screen)
RECOVERY (just give triangle makeing out with exclamation point)
FACTORY RESET
SIMLOCK
IMAGE CRC
FASTBOOT sreen
BOOTLOADER (gets me back to HBOOT screen)
REBOOT
REBOOT BOOTLOADER
POWER DOWN
Don't really want to go with pd15img.zip route to preserve data. (So far)
Thanks
btw - I'm on Simple Mobile so no OTA for me
kb-evo said:
Great post but I really need help.
I guess my phone is from some other batch or ... who know these chinese these days.
Anyways my menu is just different from described.
as folllows:
HBOOT screen
FASTBOOT (gets me to FASTBOOT screen)
RECOVERY (just give triangle makeing out with exclamation point)
FACTORY RESET
SIMLOCK
IMAGE CRC
FASTBOOT sreen
BOOTLOADER (gets me back to HBOOT screen)
REBOOT
REBOOT BOOTLOADER
POWER DOWN
Don't really want to go with pd15img.zip route to preserve data. (So far)
Thanks
btw - I'm on Simple Mobile so no OTA for me
Click to expand...
Click to collapse
I don't quite understand your issue here? Is it that you get stuck at the recovery screen with a triangle? Did you read step 7 of the previous posts clearly?
7. Use the volume rocker highlight RECOVERY and press power to select. If you see an exclamation point instead of the blue menu, you might have to press volume up or down to get into the blue recovery menu.
Ok, maybe this time it will post.
Thanks for your answer Genocaust
I'm noob so I'm trying everything that comes to my mind several times before bugging good people.
Somehow my menus seems to be different than expected. Anyways, right after hboot my first screen has following options:
* FASTBOOT
* RECOVERY
* FACTORY RESET
* SIMLOCK
* IMAGE CRC
Clicking on recovery gets me triangle/exclamation screen after several tries i managed to get blue menu by pressing VolumeUP and POWER simultaneously (just up or down does nothing at all).
there is apply update.zip but when clicked returns yellow message:
E:Can't open /cache/recovery/command
Invalid operation
and goes black and not responsive.
After waiting for say 20 min decided to pull battery. (phone works, still 2.2)
Tried above few times. Downloaded update file yet another time, even changed file name using file manager on the phone (i know).
I will appreciate any suggestions. I guess next step is pd15img.zip which I wanted to avoid or stay on 2.2
Phone is few days old and all stock
Thanks again
Hey Guys
i need your help
I tryed to flash a SbF on my phone, but at 100% my phone did an reboot an now it loops at the Bootlogo.
I can´t access the bootloader again
what should i do now?
ps: sorry for my bad english
Hi mate, can you give us a bit more details.
What was the sbf file you flashed? What was the name and version? Also make sure you got the correct file for droid global 2 and not for droid 2
Normal if fails, its best getting the old sbf file (303) and starting again.
i used the 2.2.2 Service Version (DE,ATCH)
and-developers[dot]com/sbf:milestone2
The Problem is can´t access to my bootloader or to the Clockworkrecovery
no idea what i can do???
please!!!
or do you know what would happen, if i would use my Guarantee?
you cant use your warranty if you've played with.
If you are very sure you are using a droid 2 global and you've flashed a milestone 2 sbf file then this is your problem, these phones are not the same build and you cant use the roms and sbf files, you will need to file sbf file for droid 2 global, follow this link and download the rar file (http://modmymobile.com/forums/649-m...re-vrz_a956_2-4-33_1ff_01-droid-2-golbal.html), flash this file (using rdslite 4.9) and then if you want to use a new rom you can, if you want to flash a ginger bread rom (http://www.mydroidworld.com/forums/...veryone-4-5-606-rooted-unrooted-versions.html)
, then follow this guide first (i did) and all works fine, im now using the venus rom (http://forum.xda-developers.com/showthread.php?t=1259807) after i did the gingerbread up date. If you need anymore help, either pm me and post another reply.
kurpter said:
you cant use your warranty if you've played with.
If you are very sure you are using a droid 2 global and you've flashed a milestone 2 sbf file then this is your problem, these phones are not the same build and you cant use the roms and sbf files, you will need to file sbf file for droid 2 global, follow this link and download the rar file (http://modmymobile.com/forums/649-m...re-vrz_a956_2-4-33_1ff_01-droid-2-golbal.html), flash this file (using rdslite 4.9) and then if you want to use a new rom you can, if you want to flash a ginger bread rom (http://www.mydroidworld.com/forums/...veryone-4-5-606-rooted-unrooted-versions.html)
, then follow this guide first (i did) and all works fine, im now using the venus rom (http://forum.xda-developers.com/showthread.php?t=1259807) after i did the gingerbread up date. If you need anymore help, either pm me and post another reply.
Click to expand...
Click to collapse
thank you for your answer
My Problem is that rdslite or adb devices can´t see my phone, because i stuck in the bootlogo screen.
I can not enter my bootloader or clockwork recovery.
hi mate,
to put your phone in boot loader mode.
turn off the phone, press and hold the up and down volume buttons together (make sure you are pressing and holding them down together keep them hold down and dont let go) press the power button while still holding the volume buttons and wait till bootloader comes and then let go
you are in bootloader mode
now Launch RSDLite
Select SBF
Start
oh thanks this button combination works!
Is it normal that rsdlite runs for 1 hour?
Once it gets to 100% , pull it out and restart the phone (it should reboot it normally but I find it doesn't always do it) so either unplug and let it reboot or pull the battery out and reboot, fingers crossed it will boot in to stock and then you can upgrade from there.
Did you get it working mate?
nope dude
i tryed many different SBF files, but not a single one worked?!
Is there an alternative?
Is there an option to get from my bootloader to my recoverymode?
because i want to try adb recovery?
thanks for your help bro!
Ok, here's 2 things you can try, the 2nd option will work though.
To put your phone in recovery mode = turn off the phone, press and hold the 'x' and keep it hold in and then press the power button and keep them hold down untill you see the yellow '!' And then let go of them and press up and down volume buttons together together, now your in recovery mode.
If you can't get any thing to load, do this one, but this will put you on stock gingerbread.
Take your sd card out of the phone and download the Full Stock Version (Signed) file from here = http://www.mydroidworld.com/forums/...veryone-4-5-606-rooted-unrooted-versions.html
Make sure you download the signed version.
Then copy the update.zip file and place on root of sdcard. (Rename anyother file called update.zip before this or back it up)
reboot phone into recovery (X + power key, like we did before)
Then select install update.zip this will install, will take about 10mins to install but then another 15mins on first boot.
Let me know how you get on
kurpter said:
Ok, here's 2 things you can try, the 2nd option will work though.
To put your phone in recovery mode = turn off the phone, press and hold the 'x' and keep it hold in and then press the power button and keep them hold down untill you see the yellow '!' And then let go of them and press up and down volume buttons together together, now your in recovery mode....
Click to expand...
Click to collapse
I see the yellow "!" but i can´t enter the recovery mode
Ah ok, Your Phone reflashed the Stock Recovery back onto your Phone! (so sorry, you dont have clockmod on anymore, so your going to have to use option 2, but to get in to the stock recovery after the yellow '!' you must hold the Volume "UP" key and hit "camera to access the ORIGINAL recovery options
YEAH this works!
thank you very much
no problem mate, im here top help.
once you've got yourself on to stock 2.3, you can install z4root and Droid 2 Recovery Bootstrap v1.0.0.3, (you can get thiese 2 things from here = http://www.mediafire.com/?t7k4nu87lpuho
these 2 will root your phone again and allow you to go in to recover mode again, make sure you install clockwork again and then you can install new roms on your phone, i recommend this rom if you dont want a motorola rom (non blur version)
http://forum.xda-developers.com/showthread.php?t=1259807
kurpter said:
Ah ok, Your Phone reflashed the Stock Recovery back onto your Phone! (so sorry, you dont have clockmod on anymore, so your going to have to use option 2, but to get in to the stock recovery after the yellow '!' you must hold the Volume "UP" key and hit "camera to access the ORIGINAL recovery options
Click to expand...
Click to collapse
I had the same problem and tried the same thing but when I get to the yellow "!", and press VOL up and the camera button nothing happens
Having problems was trying to re vert back to stock SBF failed now bootloader says code corrupt battery low cannot program. Can I just plug it in the charger for a bit then try again?
Sent from my Gummy Charged GBE 2.0 using xda premium
Did you try the other way? "To put your phone in recovery mode = turn off the phone, press and hold the 'x' and keep it hold in and then press the power button and keep them hold down untill you see the yellow '!' And then let go of them and press up and down volume buttons together together, now your in recovery mode."
kurpter said:
Did you try the other way? "To put your phone in recovery mode = turn off the phone, press and hold the 'x' and keep it hold in and then press the power button and keep them hold down untill you see the yellow '!' And then let go of them and press up and down volume buttons together together, now your in recovery mode."
Click to expand...
Click to collapse
Yes I tried that it is stuck in boot-loader mode & it wont charge at all.
hey guys, i need the update.zip that comes stock on the sd card.
if anyone needs anymore information:
my d2g freezes at the bootlogo
my bootloader never worked so it has a blank screen.
There is no stock update zip on the SD card. Make sure your phone is completely off turn on the phone by holding on the power button and up arrow at the same time. When the screen glows softly, let go of the buttons and you will be in the bootloaders sbf flash mode. If you get this far reply back
for gingerbread = http://www.multiupload.com/ZGUOERGZNT
D2GxNiNjA said:
hey guys, i need the update.zip that comes stock on the sd card.
if anyone needs anymore information:
my d2g freezes at the bootlogo
my bootloader never worked so it has a blank screen.
Click to expand...
Click to collapse
kurpter said:
for gingerbread = http://www.multiupload.com/ZGUOERGZNT
Click to expand...
Click to collapse
would this work if i had froyo when it happened?
i was installing venusX 3.2 just like your using but i got stuck at the splash and my bootloader is busted.
rootfan said:
There is no stock update zip on the SD card. Make sure your phone is completely off turn on the phone by holding on the power button and up arrow at the same time. When the screen glows softly, let go of the buttons and you will be in the bootloaders sbf flash mode. If you get this far reply back
Click to expand...
Click to collapse
theres probably something saying something about double posting but....
When i purchased my global from verizon, i immediately rooted it, but before, there was infact an update.zip included and its even on my friends global and he has never rooted his ever.
hi mate, was you on the froyo build when you upgraded to venus? if you did, this is why you are boot looping as venus needs the gingerbread build. if this is the case, you need to follow my update guide from here =
http://forum.xda-developers.com/showthread.php?t=1263722
its the last comment on the end, reflash that, then do an ota update, this will take you to the new GB version, then use oneclickroot, then you can upgrade to venus
kurpter said:
hi mate, was you on the froyo build when you upgraded to venus? if you did, this is why you are boot looping as venus needs the gingerbread build. if this is the case, you need to follow my update guide from here =
http://forum.xda-developers.com/showthread.php?t=1263722
its the last comment on the end, reflash that, then do an ota update, this will take you to the new GB version, then use oneclickroot, then you can upgrade to venus
Click to expand...
Click to collapse
your really helpful and i know for sure that works, but my "BOOTLOADER" IS BLANK.
therefore RSD isnt picking up any connection for me to SBF.
instead of saying:
Bootloader D0.11
Battery OK to program or something like that, the backlights just light up, nothing appears, and 3 seconds later it goes back to booting and staying there.
I knew about it needing gingerbread the minute i forgot to cancel the update in Rom manager. now i cant do anything but go into stock recovery.
and when i try to install a signed update from motorola it says:
--Install From SD Card...
...Finding update package...
...Opening update package...
.Verifying update package...
...Installing update package...
assert failed: file_getprop("/system/build.prop". "ro.build.fingerprint") == "verizon/droid2we_vzw/cdma_droid2we/droid2:2.2.S273/2.4.330:user/ota-rel-keys" || file_getprop(/system/build.prop", "ro.build.fingerprint") == "verizon/droid2we_vzw/cdma_droid2we:2.3.3/4.5.1_57_D2G-37/110722:user/release-keys"
E:Error in /sdcard/update.zip
(Status 7)
Installation Aborted.
AND!!! my power button is jammed so it doesnt work but whenever my battery is in the phone it turns on.
Is your power button not working at all? if you can get the device to boot up, you need to hold the up and down power volume button together, this will get you in to the boot loader mode, if not see if you can hold x and the power button this will take you in to the recover mode.
if you can get in to the boot loader, then you can sbf if not, and you get in to the recover mode, you will need to copy the zip file to the root of sd card, but dont use the ginger bread zip file as it wont work, you will need the update.zip from your friends phone if he is still on froyo and then in the menu just apply the update. let me know how you get on.
kurpter said:
Is your power button not working at all? if you can get the device to boot up, you need to hold the up and down power volume button together, this will get you in to the boot loader mode, if not see if you can hold x and the power button this will take you in to the recover mode.
if you can get in to the boot loader, then you can sbf if not, and you get in to the recover mode, you will need to copy the zip file to the root of sd card, but dont use the ginger bread zip file as it wont work, you will need the update.zip from your friends phone if he is still on froyo and then in the menu just apply the update. let me know how you get on.
Click to expand...
Click to collapse
1. No, my power button is not working at all.
2a. I pushed both rockers and the BLANK screen appeared
2b. Up on Arrow Keys shows a blank screen too.
3. i have access to stock recovery but thats the ONLY thing i can access.
4. (WTF) He upgraded via the OTA and formatted his SD Card...
5. If ANYONE CAN HELP, I NEED ALL FROYO update.zips that are SIGNED so i dont waste time. my contract ends in 10 days but i havent used the phone in 3 months. ive just been using some crappy feature phone.
Hi mate, i think i have the old zip file you need, i backed up my stuff age's ago and i think this is the one = http://www.mediafire.com/?whlxcbqvhzpnczd
(dont worry it is a D2G update, i just cant remember if this is the ginger bread on of froyo.
if it isnt let me know and then i'll take my phone back do to froyo and get the update .zip for you.
Regards
Scott
kurpter said:
Hi mate, i think i have the old zip file you need, i backed up my stuff age's ago and i think this is the one = http://www.mediafire.com/?whlxcbqvhzpnczd
(dont worry it is a D2G update, i just cant remember if this is the ginger bread on of froyo.
if it isnt let me know and then i'll take my phone back do to froyo and get the update .zip for you.
Regards
Scott
Click to expand...
Click to collapse
Nope, But like the post of the log, something was different.
it had 2.4.29 and 2.4.330 in it.
is there anyway i could get my bootloader to show up again?
its been blank ever since i had it.
make sure the phone is switched off, then press and hold in the volume up and down rocker together (make sure you dont let go until it you see the bootloader menu) and plug the phone in to usb (so it powers it up) and then you should be in bootloader mode, i dont know of anyother way of doing it. Also make sure your phone is at least 70% charged.
kurpter said:
make sure the phone is switched off, then press and hold in the volume up and down rocker together (make sure you dont let go until it you see the bootloader menu) and plug the phone in to usb (so it powers it up) and then you should be in bootloader mode, i dont know of anyother way of doing it. Also make sure your phone is at least 70% charged.
Click to expand...
Click to collapse
This DOES NOT work because my bootloader doesnt show anything, (no function whatsoever.) this is what happens.
1. I hold both volume rockers
2. Backlight activated (bootloader)
3. No Words
4. Turns back off
5. No RSD or Win7 notification sounds
6. goes back to Venus bootlogo
7. Stays there until it dies
now what confuses me:
if it boots up but theres no bootloader how does it boot?
otherwise, if it does use the bootloader, why does it show up blank?
it was blank when i first got it because i was wanting to root it then.
The bootloader is launched by powering the phone on while holding the up arrow key on the physical keyboard.
Gasai Yuno said:
The bootloader is launched by powering the phone on while holding the up arrow key on the physical keyboard.
Click to expand...
Click to collapse
i already knew that,
it does the exact same thing as when i hold both rockers.
my problem is that when the backlight comes on the screen doesnt show anything.
Soooo.... No SBF to fix/
And you're sure the battery is charged?
(It doesn't charge if it can't boot.)
Gasai Yuno said:
And you're sure the battery is charged?
(It doesn't charge if it can't boot.)
Click to expand...
Click to collapse
i got my friends og droid and the battery is 100%. its been a week and it still didnt do it. oh well.... on the 11th my contract is up and i dont want to get another phone but... sprint's iphone 4s is looking pretty good now!
Hello pals,
I haven't see this around here but here is the original PD1 tar for sprint also you can root and do the same as the previous update.
how to install.
MAKE SURE YOU HAVE PLENTY OF BATTERY TURN OFF YOUR DEVICE.
Then press the vol down + power + home button. This puts you into “Download Mode”.
NOW plug your phone in and let Odin recognize it
Let’s click on the START button at the bottom of ODIN and DO NOT TOUCH ANYTHING ELSE ON THE SCREEN.
The phone will reboot and start up Android, and this is fine for this portion of the process.
It will reboot and you ready to go.
if you want to root again Installing TWRP the same way with odin reboot to recovery and install “SuperSU-v2.71-N920p.zip”
here is the link https://onedrive.live.com/redir?resid=3E9A804ADEC55F4B!1903&authkey=!AOLSW0GHJ3kUo0c&ithint=file%2czip
Screen shots this phone was with a bad ESN and is fully working on t-mobile.
kasey348 said:
Hello pals,
I haven't see this around here but here is the original PD1 tar for sprint also you can root and do the same as the previous update.
how to install.
MAKE SURE YOU HAVE PLENTY OF BATTERY TURN OFF YOUR DEVICE.
Then press the vol down + power + home button. This puts you into “Download Mode”.
NOW plug your phone in and let Odin recognize it
Let’s click on the START button at the bottom of ODIN and DO NOT TOUCH ANYTHING ELSE ON THE SCREEN.
The phone will reboot and start up Android, and this is fine for this portion of the process.
It will reboot and you ready to go.
if you want to root again Installing TWRP the same way with odin reboot to recovery and install “SuperSU-v2.71-N920p.zip”
here is the link https://onedrive.live.com/redir?resid=3E9A804ADEC55F4B!1903&authkey=!AOLSW0GHJ3kUo0c&ithint=file%2czip
Click to expand...
Click to collapse
Thanks, btw where did you get this, is this firmware downloaded from sammobile, and pls add the md5 check, its a very big file anyway.
tks again
su660ics said:
Thanks, btw where did you get this, is this firmware downloaded from sammobile, and pls add the md5 check, its a very big file anyway.
tks again
Click to expand...
Click to collapse
Is the complete tar compressed on the new updates all the file are almost 2 gigs.
Pd2?
Sent from my SM-N920P using XDA-Developers mobile app
Link is broken. :{ Anyone have a mirror?