Related
When I first attempted to install the SDK, I found tutorials that only had bits and pieces about the whole procedure. A lot of Google searches and hours of eye strain. I wanted to write a solid tutorial, but instead of publishing it in a personal blog, I chose to publish it here on xda-developers. This is the definite forum to come to if you are interested in Android/G1/HTC Dream development or costumization. I wrote this to make the enlarge the knowledge of this community.
!! THIS TUTORIAL IS FOR THE LATEST UBUNTU RELEASE: JAUNTY JACKALOPE 9.04 !!
!!START -------------------------------------- Optional Preparation --------------------------------------
This applies if you -
Are interested in installing Ubuntu for the first time.
Are/will be reinstalling Ubuntu from scratch.
Want to keep your SDK installation easy to reach.
Want to keep things nice and clean.
And your machine -
Has a second hard drive.
Has free space for another small partition.
This procedure will make things easier during installation of the SDK and in the long run. Hopefully you've read about partitions. If you are dualbooting, please read this first to get an idea of what you're doing.
While installing Ubuntu and on the Prepare Disk Space screen (partition editor), select "Specify partitions manually (Advanced)"
On the Create Partition dialog, select the following options:
Type for the new partition: Primaryor Logical if you're dualbooting and know what you are doing.
New partition size in megabytes: 5120MB (5GB) might work. BUT:
ccyrowski said:
It should be noted that if you ever plan on compiling kernels and/or cupcake ROM's you will NEED ubuntu8.04. You'll also need at least 10GB.
Click to expand...
Click to collapse
Location for the new partition: Beginning
Use as: Ext4 or Ext3Filesystem doesn't matter. (?)
Mount point: /AndroidSDKEnter this manually
Complete Ubuntu installation as usual.
-------------------------------------- Optional Preparation -------------------------------------- END!!
You will now install the SDK.
!!START -------------------------------------- Installing Android SDK --------------------------------------
Installing the SDK is the easiest of all.
Download the SDK.169.9 MB [http://developer.android.com/sdk/download.html?v=android-sdk-linux_x86-1.5_r3.zip]
Right-click and select Extract Here.
Move the contents of the android-sdk-linux_x86-1.5_r3 directory to your desired location.If you followed Optional Installation, move the contents to your /AndroidSDK directory in the root of your filesystem.
Close directory window.
-------------------------------------- Installing Android SDK -------------------------------------- END!!
You will now set up your bashrc file and UDEV to recognize your HTC Device.
!!START -------------------------------------- ADB + FASTBOOT --------------------------------------
The Android Debug Bridge (adb) is one of the tools that will help you the most when you run into flashing problems or running shell commands directly from your machine. UDEV will not recognize your G1 out of the box, but we will configure it with some rules so it can connect.
We will work with /AndroidSDK as the location of your sdk. If this is not your setup, I think you're smart enough to figure it out.
Editing .bashrc file to use tools from /AndroidSDK/tools/ directory -
Go to your home folder.Example: /home/wddglr/
Press Control + H to view hidden files.
Look for your .bashrc file and double click to open it with gedit.
Add the following lines to the top of the file:
Code:
#AndroidDev PATH
export PATH=${PATH}:/AndroidSDK/tools
IMPORTANT NOTE
savethechicken said:
This is the way that I have my .bashrc file setup. For those having problems with it not recognizing the adb as a command try this...
Code:
export PATH=$PATH:/AndroidSDK/tools
I removed the {} around ${PATH} and it is working if I had them on it would say that it didn't recognize the command. Removed them and all works well.
Click to expand...
Click to collapse
Setting up UDEV to recognize HTC Device -
Type the following into a terminal (Applications > Accessories > Terminal):
Code:
gksudo gedit /etc/udev/rules.d/51-android.rules
Now add the following line to the blank file:
Code:
SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666"
Click save and close.
To restart udev, open up a terminal and enter:
Code:
sudo /etc/init.d/udev restart
Setting up fastboot -
Download this fastboot binary from http://android-dls.com.130.4 KB [http://android-dls.com/files/linux/fastboot]
Once downloaded to your desktop, right click and select Properties.
Navigate to the Permissions tab and configure the following option:Execute: [√] Allow executing file as program
Click Close.
Move the fastboot bianary to your /AndroidSDK/tools/ directory.
Reboot.
-------------------------------------- ADB + FASTBOOT -------------------------------------- END!!Now you can use adb and fastboot directly from any terminal. If you chose to do the Optional Preparation, you can now save your Eclipse Workspace and your downloaded/custom ROMs/Themes in this new /AndroidSDK directory keeping things easier to reach and safe from evil disk errors or other mishaps!!! :OIf you are having problems, send me a PM. I will be happy to help.
*applaudes* awesome. Should be added to helpful threads.
very nice! perhaps add a "(How-To)" prefix to thread??
Everything was going great in setting this up until I got to this part "gedit /etc/udev/rules.d/51-android.rules"
I cannot find "51-android.rules" inside of "rules.d"
Any thoughts>?
nicholasbithell said:
Everything was going great in setting this up until I got to this part "gedit /etc/udev/rules.d/51-android.rules"
I cannot find "51-android.rules" inside of "rules.d"
Any thoughts>?
Click to expand...
Click to collapse
it does not exist, you will make it.
do the command as stated above.
Code:
gksu gedit /etc/udev/rules.d/51-android.rules
Damn you beat me to it!
I was just thinking earlier about doing this same "How-To" guide, I was surprise to see it posted just now.
Anyways, great job!
Can someone sticky this thread. Now I have ADB & fastboot on my Win7, Ubuntu, and OS X Partition. Thank you wddglr.
bravo...linux rocks even better now!...
Awesome tutorial for setting this up. Have been using adb/sdk on ubuntu since oct. but this would have saved me some headaches back in the first couple of weeks.
The onlything that is not clear and/or confuses me is
Setting up the udev to recognize the device.
SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666"
Have never used this (will now to see if it will do anything) and the only problem i have is that sometimes i have to kill-server to get it to connect correctly but i have seen this happen to almost everyone on many forums since the 9.04 came out. And even after putting this file on the computer i have had the problem.
savethechicken said:
Awesome tutorial for setting this up. Have been using adb/sdk on ubuntu since oct. but this would have saved me some headaches back in the first couple of weeks.
The onlything that is not clear and/or confuses me is
Setting up the udev to recognize the device.
SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666"
Have never used this (will now to see if it will do anything) and the only problem i have is that sometimes i have to kill-server to get it to connect correctly but i have seen this happen to almost everyone on many forums since the 9.04 came out. And even after putting this file on the computer i have had the problem.
Click to expand...
Click to collapse
It happens to me also from time to time. especially when i reboot and want to go into adb while the device is rebooting. although that file, 51-adndroid.rules, is what helped me get adb to recognize the device. the guide on developer.android.com talked about 50-android.rules but after a few deep searches i found this: http://groups.google.com/group/android-developers/browse_thread/thread/1d3488c601243686
Okay A few questions for you....
First I fixed the whole "couldnt find the (51-android.rules) file now I am having issues with executing ADB!
When in terminal this is what I get...
"[email protected]:/home/nick# /AndroidSDK/tools/adb
bash: /AndroidSDK/tools/adb: cannot execute binary file
[email protected]:/home/nick#"
and I also noticed something different from when I start terminal the first lines now state
"bash: : command not found
[email protected]:~$"
I dont remember the first line ever being there, but I could be mistaken!
Any help would be greatly appreciated!
Edit: You state creating "Mount point: /AndroidSDK" During Installation, and what I did was Just place my AndroidSDK at root so it is at "/AndroidSDK". I dont know if this makes a difference.
I am actually running ubuntu 8.10 ha! I just tried to update But I keep getting errors! is there anything I can change to get this to work on ubuntu 8.10?
nicholasbithell said:
First I fixed the whole "couldnt find the (51-android.rules) file now I am having issues with executing ADB!
When in terminal this is what I get...
"[email protected]:/home/nick# /AndroidSDK/tools/adb
bash: /AndroidSDK/tools/adb: cannot execute binary file
[email protected]:/home/nick#"
and I also noticed something different from when I start terminal the first lines now state
"bash: : command not found
[email protected]:~$"
Edit: You state creating "Mount point: /AndroidSDK" During Installation, and what I did was Just place my AndroidSDK at root so it is at "/AndroidSDK". I dont know if this makes a difference.
I am actually running ubuntu 8.10 ha! I just tried to update But I keep getting errors! is there anything I can change to get this to work on ubuntu 8.10?
Click to expand...
Click to collapse
okay, a few things -
seems like your .bashrc file isn't setup right (?)
make sure that the two lines you inserted into it are on separate line
Code:
#AndroidDev PATH
export PATH=${PATH}:/AndroidSDK/tools
because maybe export PATH=${PATH}:/AndroidSDK/tools got commented on accident if you copy pasted.
When copying your SDK to the root of your filesystem, did you copy it as your own user or as root? you can use:
Code:
gksu nautilus
to copy system files with complete root privileges.
What exactly are you trying to update, Ubuntu or ... ? There shouldn't be a difference to get this working on 8.10, the only thing that seemed to change was the 51-android.rules file. Maybe this can help -
renaming it to 50-android.rules with
Code:
gksu nautilus
and deleting any backups (use CTRL+H to view hidden files).
restarting udev using:
Code:
sudo /etc/init.d/udev restart
Remember this is for 9.04, not 8.10. I hope this helps.
wddglr said:
okay, a few things -
seems like your .bashrc file isn't setup right (?)
make sure that the two lines you inserted into it are on separate line
Code:
#AndroidDev PATH
export PATH=${PATH}:/AndroidSDK/tools
because maybe export PATH=${PATH}:/AndroidSDK/tools got commented on accident if you copy pasted.
When copying your SDK to the root of your filesystem, did you copy it as your own user or as root? you can use:
Code:
gksu nautilus
to copy system files with complete root privileges.
What exactly are you trying to update, Ubuntu or ... ? There shouldn't be a difference to get this working on 8.10, the only thing that seemed to change was the 51-android.rules file. Maybe this can help -
renaming it to 50-android.rules with
Code:
gksu nautilus
and deleting any backups (use CTRL+H to view hidden files).
restarting udev using:
Code:
sudo /etc/init.d/udev restart
Remember this is for 8.10, not 9.04. I hope this helps.
Click to expand...
Click to collapse
Okay this is how I moved my "AndroidSDK" Folder to root....
[email protected]:~$ su
Password:
[email protected]:/home/nick# mv /home/nick/Desktop/AndroidSDK /
[email protected]:/home/nick#"
And I went to the bashrc file and it is entered in there correctly.
This is still what I get even after restarting Udev...
" bash: : command not found
[email protected]:~$ adb
bash: /AndroidSDK/tools/adb: cannot execute binary file
[email protected]:~$ su
Password:
[email protected]:/home/nick# adb
bash: adb: command not found"
Edit: This is what my .bashrc file looks like, well the top part of it anyways....
#AndroidDev PATH
export PATH=${PATH}:/AndroidSDK/tools
# ~/.bashrc: executed by bash(1) for non-login shells.
# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
# for examples
Okay your .bashrc is setup right and it's recognizing adb and its directory.
I would say it's something to do with permissions. since you moved it under su, you are not the owner so i would say that you'd have to change the permissions of /AndroidSDK
you can do that with -
Code:
gksu nautilus
Navigate to /
Right click on /AndroidSDK and select Properties
Click on Permissions tab
Select your user account as the owner
hopefully now it will function correctly
wddglr said:
Okay your .bashrc is setup right and it's recognizing adb and its directory.
I would say it's something to do with permissions. since you moved it under su, you are not the owner so i would say that you'd have to change the permissions of /AndroidSDK
you can do that with -
Code:
gksu nautilus
Navigate to /
Right click on /AndroidSDK and select Properties
Click on Permissions tab
Select your user account as the owner
hopefully now it will function correctly
Click to expand...
Click to collapse
I dont understand what this line does...
"gksu nautilus"
when i type it in it asks me for my administrative password and then after i put it in it hangs for a sec and then back to...
bash: : command not found
[email protected]:~$ gksu nautilus
[email protected]:~$
nautilus is the file browser, while using gksu nautilus you can use the file browser under root privileges
wddglr said:
nautilus is the file browser, while using gksu nautilus you can use the file browser under root privileges
Click to expand...
Click to collapse
I dont have Nautilus as a file browser I have Thunar I believe.
Then gksu thunar
wddglr said:
nautilus is the file browser, while using gksu nautilus you can use the file browser under root privileges
Click to expand...
Click to collapse
For permissions it says that I am the owner and the group (I=Nick) for Others it says Read and Write, Access says Read and write. So it seems it has all the right permissions. Any other Ideas?
Partitioning HD
First off, thank you for this thread, it's most excellent. I have a question that is slightly off topic, but not so much. I have Ubuntu 9.04 installed on my recovery partition. This partition is only 10 GB, while I have Vista on my main. I have almost 100 GB free on my main drive, and what I want to know is, if I resized my partitions to give more space to Ubuntu, how would it affect my comp? (if at all). And which OS should I be on while resizing, Ubuntu or Vista?
Ok, I have fedora 11 installed on most of my computers, since i love this distro to death. My big thing was trying to get adb to work. This is my guide to get it to work, for now.
First things first. Navigate to /etc/udev/rules.d as root. Create a rules file called 50-android.rules (touch 50-android.rules). NOTE: You are better off looking at the contents and picking a rules number set other than what is listed. Sometimes udev is picky. For the newbies, so if any rules start with '50', then change the number by one or two, like 51 or 52. Paste this into the file:
Code:
SUBSYSTEM=="usb",ATTRS{idVendor}=="0bb4",SYMLINK+="android_adb",MODE="0666"
Make sure you use ATTRS, not ATTR or SYSFS, since this is a newer updated udev system.
After that, run udevadm control --reload-rules to reload your rules files. Now just run ./adb devices as root to make sure it recognized your HTC dream. I am working on this fix right now so you don't need to be root, keep patient. Now you can adb shell into your device either as root OR normal user, just as long as you start the server as root. This is a permissions problem, and hopefully I can fix this and/or find a fix soon.
I wrote this because i searched high and low through google, and only found a few good parts as far as a fix. Hopefully this helps a few people out there.
Just wondering if this has helped anyone. If not, delete this thread or do whatever with it....
I have adb on my eeepc 900 with f11 I believe this method works too as well. although it says it has been tested with ubuntu, it works pretty well with f11.
http://www.talkandroid.com/android-sdk-install-guide/
Installing The Android SDK
First you will need to download the Android SDK pack .zip archive, once downloaded find a suitable installation location on your machine and extract the zipped files.
Please note: This installation location will be referred to as $SDK_ROOT from now on through this tutorial
Alternatively you can add /tools to your root path which will prevent the need to specify the full path to the tools directory along with enabling you to run Android Debug Bridge (adb) along with other command line tools.
To add /tools:
Linux
1. Edit the ~/.bash_profile or ~/.bashrc files looking for a line that sets the PATH variable.
2. Add the full path location to your $SDK_ROOT/tools location for the PATH variable.
3. If no PATH line exists you can add the line by typing the following:
4. export PATH=${PATH}:<path to your $SDK_ROOT/tools>
Click to expand...
Click to collapse
It helped me, since the creation of the file my OpenSuSE 11.0 recognizes the phone perfectly
Thanks a lot for your hint.
thanks it helped me. ill be looking forward to getting it to work without root
just use sudo instead
Just a heads up for user's using Ubuntu 9.10, this isn't needed. I connected my G1 to it and ran ADB with no adjustments to udev or anything else.
Pretty much it works out of the box.
Here is my version
download the .tgz file from googlecode
http://developer.android.com/sdk/index.html
sudo tar -xzvf android-sdk_r3-linux.tgz
Click to expand...
Click to collapse
Code:
sudo gedit ~/.bash_profile
heres my bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH=$PATH:/android-sdk-linux/tools
Click to expand...
Click to collapse
logout
login
connect android g1 device via usb to pc
open a terminal
Code:
adb devices
if you cant get a device try it with superuser.
Don't you think that this is all just a little bit excessive?
To make it work in F11, just do this;
Download SDK, extract.
To use, type:
/path/to/sdk/tools/adb
Another option is to edit the /etc/profile and add
PATH=$PATH:/<Path to android-sdk>/tools
This option will allow any user to use the adb tools when logged in or if you
su -
into another user
I wrote a short guide as well for Windows and Ubuntu. Might help others.
Unfortunately, as anyone with a passing acquaintence with ADB knows, the scrolling issue can be a killer. I swear the other day I pressed "up" twice and it composed "rm /sdcard/rootfs.img /sdcard/system.ext2" and executed it. We run Android on our SD's btw.. Was not cool. Instead, I use ADB via telnet and it works beautifully. Here's how:
Code:
adb shell telnetd &
adb forward tcp:9999 tcp:23
Now type this: "telnet localhost 9999"
Enter "root" and hit enter
Finally update PATH: "export PATH=/usr/bin:/usr/sbin:/bin:/sbin:/system/sbin:/system/bin:/system/xbin:/system/xbin/bb:/data/local/bin"
Okay, so 4 lines to enter and you have a "regular, sane" shell connection to the phone and you can actually scroll through history and text without it jumbling the text and executing random code. Enjoy.
lbcoder said:
Don't you think that this is all just a little bit excessive?
To make it work in F11, just do this;
Download SDK, extract.
To use, type:
/path/to/sdk/tools/adb
Click to expand...
Click to collapse
that works too as well but i would rather open up a terminal and type
sudo adb devices
sensimila said:
that works too as well but i would rather open up a terminal and type
sudo adb devices
Click to expand...
Click to collapse
WHY would you want to make it *MORE COMPLICATED*??
There is NO NEED for root.
/path/to/adb ...
THATS ALL.
This is kind of funny... i wrote this because i had trouble with it, so i am just sharing my fix...
In case this is interesting to someone:
The fix mentioned in the first post has to be applied to open SuSE x86 and x64 edition to make the G1 work. The external device works without it, but not the adb device.
Thanks again!
Just wanted to come and post that this does work with OpenSUSE 11.2 x86. Did this hoping to get adb to work with my LG Ally and it does. Thanks!
(Still) works for me on 64bit SUSE 11.4.
Before adding this file, I could not access my device with adb, received permissions errors.
Added this file, and I can shell into my device.
Permissions on adb itself was not the problem, it was access to the device when udev found it.
[edit]Actually used the lines from http://developer.android.com/guide/developing/device.html[/edit]
I have compiled this guide from the other one posted on this forum, the discussion therein, and my own knowledge. If you have any suggestions on making it better or to correct any mistakes I may have made please let me know.
This guide is intended for Windows and includes detailed instructions. It will cover the steps necessary to root, flash the new recovery image, create a full backup. This will work with software versions 1.29.651.1 and 1.56.651.2 (aka Android 1.5). If you have updated to 2.1 please following this guide here. I am not responsible for any damage done to your phone using this guide. Root at your own risk.
I have put to together a video on YouTube for you to follow along as well. The version numbers of certain files are now outdated in the video so change file names as necessary.
If you own a non-Sprint Hero, you will need to do some extra steps. Follow the guide in the How to Root Non-Sprint CDMA Hero thread.
Step 1: Download the Android SDK from http://developer.android.com/sdk/index.html The Windows file is called android-sdk_r06-windows.zip. Extract the files to your C: drive so that you now have the folder C:\android-sdk-windows
Step 2: Download the asroot2 exploit file from http://forum.xda-developers.com/attachment.php?attachmentid=244212&d=1257621154 Extract asroot2.zip to C:\android-sdk-windows\tools folder.
Step 3: Download the Hero recovery image from http://forum.xda-developers.com/showpost.php?p=4898505&postcount=1g Place this file in C:\android-sdk-windows\tools as well.
Step 4: Make sure USB Debugging is off by going to Settings>Applications>Development. Now connect the phone to your PC via USB cable.
Step 5: Mount your sdcard; Browse to the HTC Sync folder and install HTC Sync on your pc. After it is done installing unmount the sdcard then enable your USB debugging.
Step 6: Open a command prompt by clicking the Start button and typing cmd into the search box and pressing enter or found under All Programs>Accessories.
Step 7: You will now enter a series of commands which I will place inside code boxes to indicate the entire command. You may copy and then paste them into the command prompt window by right clicking. Only enter one command at a time.
1:
Code:
cd C:\android-sdk-windows\tools
2:
Code:
adb devices
If you've been following this guide you will see your phone's serial number. If you get "device not found" error, you either need to make sure you the drivers were properly installed or make sure you enable USB debugging AFTER you connect the USB cable. Continue on once you get the proper phone serial output.
3:
Code:
adb push asroot2 /data/local/
4:
Code:
adb shell
5:
Code:
chmod 0755 /data/local/asroot2
6:
Code:
/data/local/asroot2 /system/bin/sh
You should see an output that says:
$ /data/local/asroot2 /system/bin/sh
[+] Using newer pope_inode_info layout
Opening: /proc/857/fd/3
SUCCESS: Enjoy the shell.
#Now for a few last commands.
7:
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
8:
Code:
cd /system/bin
9:
Code:
cat sh > su
10:
Code:
chmod 4755 su
You are now officially rooted. A few more steps and you will have flashed the recovery image.
11:
Code:
exit
12:
Code:
exit
13:
Code:
adb push recovery-RA-heroc-v1.6.2.img /sdcard
Pushing is equivalent of copy the file to the root of your sdcard. By the time you finished reading this it should be done. You'll know its done because the ouput will say something like transferred X bytes in X secs.
14:
Code:
adb shell reboot
This will cause the phone to restart automatically. Wait till it is fully booted to continue.
15:
Code:
adb shell
16:
Code:
su
17:
Code:
cd /sdcard/
18:
Code:
flash_image recovery recovery-RA-heroc-v1.6.2.img
FLASHING TO THE RECOVERY TAKES SEVERAL SECONDS-- BE PATIENT. ENTER THE NEXT COMMAND ONLY AFTER THE COMMAND PROMPT RETURNS TO THE # (ROOT SYMBOL).
19:
Code:
reboot recovery
Step 8: This is the last command; you may now close the cmd prompt. This will cause your phone to boot into recovery mode; it should take no longer than 30 secs. The third option on the list is "- Backup/Restore"; select it. Now, select the first option "- Nand backup". The phone will prompt you to press HOME to confirm which is want you want to do. The backup will begin. You will see the screen say, "Performing backup : .........." When done, the bottom of the screen will say "Backup complete!" and you will be given the menu options again. Go back to the main menu and select reboot system. Rebooting your phone after installing the new recovery image may take several minutes.
Step 9: Once your phone is fully booted, mount the sdcard. You will see a folder called "nandroid"; I highly recommend you copy this to your pc in case you lose your sdcard data or reformat it. Your phone is rooted, 100% backed up, and ready to install a custom rom if you wish!
wow dude,
instructions worked great on Win7
i was able to download the missing usb_drivers by running SDK Setup in C:\android-sdk-windows, and selecting the usb driver from the available packages. I was unable to download the index for the SDK Setup program until I enabled "force http://" in the settings menu.
had to copy over asroot again after i ran SDK Setup (that program deleted it from the directory)
your instructions worked like a charm. total time spent rooting this thing after finding your post: 18 minutes.
(you might want to add a line there in the "mount and copy over the zip file step" to backup the nandroid folder from your SDCard to your comp just as a backup of your stock phone image)
anyway.. cheers!
izanagi said:
wow dude,
i'm about to follow these instructions. thank's for the precise list!
(btw, about to try it on Win7.. may have to change some folder pathing but we'll see)
okay.. typo on the first command in parentheses, and I'm missing the usb_drivers folder (do you have it / can sent it to me) so am unable to install the device in win7.
Click to expand...
Click to collapse
Heh, thanks for the misspell heads up. I did my rooting from Win7 pc; it automatically installed correct drivers for me. To check go to the Control Panel>View devices and printers. You see one device named "Android Phone". Otherwise as far as Ive heard installing HTC Sync installs proper drivers.
izanagi said:
*** edit had to copy over asroot again after i ran SDK Setup (that program deleted it from the directory)
**** edit: all done.. your instructions worked like a charm. total time spent rooting this thing after finding your post: 18 minutes.
(you might want to add a line there in the "mount and copy over the zip file step" to backup the nandroid folder from your SDCard to your comp just as a backup of your stock phone image)
anyway.. cheers!
Click to expand...
Click to collapse
Thank you for taking the time help make my guide better. I'm very glad to know there are little to no hiccups.
When I do step 5, instead of:
5. "/data/local/asroot2 /system/bin/sh"
You should see an output that says:
$ /data/local/asroot2 /system/bin/sh
[+] Using newer pope_inode_info layout
Opening: /proc/857/fd/3
SUCCESS: Enjoy the shell.
#
I get:
[1] Killed /data/local/asroot2 /system/bin/sh
Any suggestions? Should I just be quiet until there is an Eris specific way to do this?
When I do step 5, instead of:
5. "/data/local/asroot2 /system/bin/sh"
You should see an output that says:
$ /data/local/asroot2 /system/bin/sh
[+] Using newer pope_inode_info layout
Opening: /proc/857/fd/3
SUCCESS: Enjoy the shell.
#
I get:
[1] Killed /data/local/asroot2 /system/bin/sh
Any suggestions? Should I just be quiet until there is an Eris specific way to do this?
detox702 said:
When I do step 5, instead of:
5. "/data/local/asroot2 /system/bin/sh"
You should see an output that says:
$ /data/local/asroot2 /system/bin/sh
[+] Using newer pope_inode_info layout
Opening: /proc/857/fd/3
SUCCESS: Enjoy the shell.
#
I get:
[1] Killed /data/local/asroot2 /system/bin/sh
Any suggestions? Should I just be quiet until there is an Eris specific way to do this?
Click to expand...
Click to collapse
This guide is for the CDMA Hero not the Eris!
When I go to apply the rom I get an white screen with skateboarding androids on the bottom and the prompt to erase data yes/no. I press the home key and the Hero reboots without asking to "Apply sdcard:choose zip". This is done from the boot menu. Does the rom load automatically? Did I do something wrong? I got root with no problem. A tip; to make it easier and to avoid spelling mistakes copy and paste the rooting commands from the instructions. Made it go faster too. Thanks in advance.
Never mind. I held down Home and Power at
the same time instead of Home THEN power! ARRGH! Loading up now as I type. Sorry.
ELIMINATED said:
When I go to apply the rom I get an white screen with skateboarding androids on the bottom and the prompt to erase data yes/no.
I press the home key and the Hero reboots without asking to "Apply sdcard:choose zip".This is done from the boot menu.
Does the rom load automatically? Did I do something wrong? I got root with no problem.
A tip; to make it easier and to avoid spelling mistakes copy and paste the rooting commands from the instructions. Made it go faster too. Thanks in advance.
Click to expand...
Click to collapse
yuck... break up your sentences, that's alot of crap to throw on someone all at once... and the bold doesn't help it any.
check to see if you have the custom recovery installed....
-turn off phone
-hold vol down + power
-should search for some stuff then give three options
-press "home" to enter recovery image
do you see "!" and a phone.... does it just hang or do you see a green/yellow menu?
At the end of his post he says he figured it out. He wasn't holding down home key
None of this is working for me at all... I'm not sure what I'm doing wrong, but every time I enter ANY of the commands into the prompt all I get is "cannot find the path specified".
For reference, i have done everything in this guide to the letter, everything is downloaded, unzipped to the correct location, USB drivers installed, etc etc. Not sure what's wrong.
EDIT: I figured it out.. user error, awesome. Worked great, thanks for this!
awesomeindeed said:
None of this is working for me at all... I'm not sure what I'm doing wrong, but every time I enter ANY of the commands into the prompt all I get is "cannot find the path specified".
For reference, i have done everything in this guide to the letter, everything is downloaded, unzipped to the correct location, USB drivers installed, etc etc. Not sure what's wrong.
EDIT: I figured it out.. user error, awesome. Worked great, thanks for this!
Click to expand...
Click to collapse
"cd C:\android-sdk-windows\tools" is actually "cd C:\android-sdk_r3-windows\tools"
is that where you are stuck?
thank you TS. I've been lurking xda for a couple years now when i had the mogul and tp. First time on an android device. Thank you for your time in helping me.
someone buy this man a drink!!!
Invaluable piece of work right here, helped me get it done in no time at all....real clear concise and very helpful....REQUEST THIS BE A STICKY!!!!!
fenske09 said:
"cd C:\android-sdk-windows\tools" is actually "cd C:\android-sdk_r3-windows\tools"
is that where you are stuck?
Click to expand...
Click to collapse
That was the name of the zip file not the extracted folder.
Please help, I followed all of your instructions, I received no errors however I can't boot the recovery image. I checked and it is in the sd card, but every time it just hangs at the HTC logo
I downloaded a terminal emulator and typed su and it gave me # so I assuming I am rooted?!
newtodroid said:
Please help, I followed all of your instructions, I received no errors however I can't boot the recovery image. I checked and it is in the sd card, but every time it just hangs at the HTC logo
I downloaded a terminal emulator and typed su and it gave me # so I assuming I am rooted?!
Click to expand...
Click to collapse
Redownload the recovery image and reflash it. The one you're using probably became corrupt during DL or something.
theresthatguy said:
Redownload the recovery image and reflash it. The one you're using probably became corrupt during DL or something.
Click to expand...
Click to collapse
also make sure you have the heroc version there's a hero and heroC, i messed that up once and had similar results
new ROM
So i loaded the custom ROM, and i followed all the istructions as listed on this guide. When i rebooted my phone, a bunch of my apps started Force Closing on startup.
did i miss something, or do something wrong?
if i reinstall them on the new ROM will they work right?
thanks for any insight
kristaps said:
So i loaded the custom ROM, and i followed all the istructions as listed on this guide. When i rebooted my phone, a bunch of my apps started Force Closing on startup.
did i miss something, or do something wrong?
if i reinstall them on the new ROM will they work right?
thanks for any insight
Click to expand...
Click to collapse
you converted your sd card to fat32,ext2,swap and now the apps are looking for the program on your sd card,
turn off your phone
take out sd card
turn on phone
uninstall app
turn off phone
put in sd card
turn on phone
reinstall app
this should fix you
NOTE: This is a work in progress. While I have completed this guide myself SEVERAL times to ensure accuracy, It is possible that typos or errors in understanding exist. Please use at your own risk, and expect NOTHING from me. I will do my best to update this guide and improve the formatting as I find time. Feel free to leave feedback!
I cannot stress this enough: always have backups of any important information. While we may not be able to do full image-based backups until after root, you can still make sure we aren't deleting needed data. While yes, Google should hold your most important data and allow you to sync at any time, what would you do if Google went down? And I've even had trouble using the "Offline" function for some of the Apps. Therefore, Make a copy of everything on your SD card and read this excellent guide from Lifehacker about how to backup Google Apps data: Lifehacker
You will need an SD card. I recommend AT LEAST an 8GB Class 4. Most actually recommend a Class 6 for use with apps2sd, but I just wanted to let you know that it would still work with a Class 4. For those unaware, apps2sd allows you to save internal phone memory by placing after-market applications onto your SD card. Most users notice a speed benefit from this.
If you would like to purchase a Class 6 SD card, you can get a one here with three sizes available (4GB, 8GB, 16GB):
A-DATA MicroSDHC Class 6 Turbo With SD Adapter
To ensure the best possible load, perform a factory reset, and WIPE your SD card!
Code:
Menu > Settings > Security > Factory data reset > Reset phone > Erase everything
TRUE FACTORY RESET (UN-ROOT)
If you, like me, have already rooted and are trying to perform this process over again, you will unfortunately have to download the original ROM and flash it in Windows.
Download: RUU_Hero_C_Sprint_1.29.651.1_signed_release.exe
Run in Windows (I used XP through VMWare Fusion), and this will return the phone to the TRULY factory loaded state. Any other Factory data reset will simply reload the last ROM image saved, which, if you rooted and loaded MoDaCo, would be MoDaCo. I am encouraging you to follow this process to avoid any problems that may exist while the phone is rooted or loaded with the unofficial ROM. And even if you perform this process as a first-time rooter, it certainly wont hurt!
ROOT HERO [MAC]
(This is the process that allows modifications to occur on your phone):
The guide I follow and can verify is this:
Rooting CDMA Hero [Mac]
I do not use Windows as a primary platform, so I would recommend following this guide if you are on Windows:
How to root the CDMA Hero (DETAILED Windows guide)
You should be able to return to this guide after you have successfully completed the root process on Windows. Continue from the section "NANDROID BACKUP" below.
Per the purpose of this guide, I will detail my exact steps from the "Rooting CDMA Hero [Mac]" post. Thanks ajones7279!
Plug in your phone
Download Android SDK: http://developer.android.com/sdk/index.html
Unpack, Rename the extracted folder to "AndroidSDK" (This is case sensitive!), and Move it to "Applications" (I consider the Android SDK a set of applications.)
Open TextEdit, Click Format>Make Plain Text, then copy and paste the following:
Code:
export PATH=${PATH}:/Applications/AndroidSDK/tools
Save as: ".bash_profile"
On Phone: Go to Settings > Applications > Development>USB Debugging and make sure the option is checked.
On your Mac: Download asroot2: http://zenthought.org/tmp/asroot2
Save this file into: /Applications/AndroidSDK/tools
Open Terminal and run the following commands (You can copy and paste):
Code:
cd /Applications/AndroidSDK/tools
adb push asroot 2 /data/local
adb shell chmod 0755 /data/local/asroot2
adb shell
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4775 su
exit
exit
At this point, the phone has root access.
Download: http://rapidshare.com/files/303797523/recovery-RA-heroc-v1.2.3.img
Save this file into: /Applications/AndroidSDK/tools
Go back to your terminal and type:
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
adb shell
su
flash_image recovery /sdcard/recovery-RA-heroc-v1.2.3.img
exit
exit
adb shell reboot recovery
Now, the phone will reboot into recovery mode. To preserve our freshly rooted state, we will make a Nandroid backup.
NANDROID BACKUP
*NOTE: These steps assume that you have already entered Recovery Mode on the phone through Terminal "adb shell reboot recovery" or the "Quick Boot" app.*
On phone: Using the trackball, scroll down and select "Nandroid v2.2 backup". This will create a backup of the phone in its freshly rooted state to your SD card, under the nandroid directory.
After it completes the backup, we want to make sure that we have the backup "backed up" by copying it to our Mac (Just in case anything happens to the SD card!).
Select "USB Mass storage on"
After your SD Card appears, copy the contents of the "nandroid" folder to anywhere you wish on your Mac (You are using Time Machine right?)
Once the copy is complete, eject the sdcard in mac and select "USB Mass storage off" on the phone.
NOTE: Nandroid does not backup the contents of your SD card. If you don't want to lose what's on your SD card, MAKE A BACKUP COPY!
From this point forward, if you do something that seems to really mess with the phones functionality, you can simply go back to your Nandroid backup!
RESTORE NANDROID BACKUPS
Select "Nandroid v2.2 restore" *THIS WILL ERASE EVERYTHING ON YOUR PHONE*
Your phone will be returned to the condition it was in as of the last Nandroid backup. You can control which backup is restored by deleting the unwanted, time-stamped folders within the "nandroid" directory on your SD card. If you leave only one time-stamped backup folder, that is the backup that will be restored.
Note that this will leave the custom Recovery ROM we loaded (recovery-RA-heroc-v1.2.3.img) in place.
I actually perform a Restore after every Backup. While this takes extra time, you know your Backup is intact and not corrupted in any way!
If you are looking for a complete factory reset, you will need to scroll up to "TRUE FACTORY RESET (UN-ROOT)"
PREPARE SD CARD FOR APPS2SD (A2SD)
For those unaware, apps2sd allows you to save internal phone memory by placing after-market applications onto your SD card. Most users notice a speed benefit from this.
Select "Wipe SD: fat32+ext2+swap" *THIS WILL ERASE EVERYTHING ON YOUR SDCARD*
Select "USB Mass storage on"
The mounted drive should now be empty. Double-check that it was partitioned correctly by opening Disk Utility and verifying 3 partitions on the sdcard: NONAME, disk1s2, and disk1s3. Close Disk Utility.
LOAD Unofficial MoDaCo 1.2c Core ROM
Forum Post: Unofficial MoDaCo 1.2
Download: Unofficial MoDaCo 1.2c Core
Save this file into: your SD card. (the root of your SD card, probably named "NONAME" if you didn't change it. You can change it to whatever you want though.)
Save the file as: "update.zip" (Or rename it)
Eject your sdcard and Select "USB Mass storage off"
Select "Apply sdcard:update.zip"
Select "Reboot system now"
If it successfully loaded, you now have a fresh load of the Unofficial MoDaCo 1.2c ROM! Congrats!
I would recommend that you create another Nandroid backup. Scroll back up to "NANDROID BACKUP" and follow the steps over again and come back to this point.
Now you are ready for the workarounds!
Guide: Workaround Issues (Unofficial MoDaCo 1.2c)
Why'd you make another guide?
nice guide man, no need to respond why you made another guide, the more the merry, nicely detailed as well
Shhhhhh.
I was just curious because there are like six...
I made another guide because while many of the forum posts acomplish bits and pieces, my guide provides the overall picture. Root, ROM, and Backup. And my upcoming "Workarond Issues" guide will collect scattered information in a similar fashion.
I find it ironic that I thanked you for your contribution and you find this guide excessive. Would you prefer that I removed the guide?
No not at all. Yours is nice and concise. There's just a lot, that's all. That's why I said it would be nice if a moderator could have merged all the ones that were already written at the end of mine. Didn't mean any harm.
Ah, I see what you mean. To be honest, I am also making this guide for self reference. If most all of the information I need is together its easier to help myself as well as my friends and the community. Thanks again for all your contributions.
Just to raise awareness, Nandroid does NOT back up your apps if you are using AppsToSD as in MoDaCo. You must back up your apps separately.
True, thanks for the heads up. I'll work on a separate guide that details how to backup your other apps. I believe that anything after-market can be backed up and restored through ASTRO though, and this is much easier for most than adb and Terminal commands (push/pull).
The whole 1.56.651.2 Firmware update is also making me wait to post any further guides, as some of my worksarounds may prove useless. It looks like we still have the Apps Renaming and Reverting issue though, and I didn't see the Sprint admin adress such issues specfically.
?
ok i did the update to the hero. and now found out about rooting(im new to all this) do i run that program you put in the beginning with windows? and then does that rom resolve the issue with battery with sms and other things the OTA update fixed? or should i get another rom or .img idk what to call it really and what does RUU stand for?
Alright,
A couple things to add to this guide, for the complete noob, as I can try to explain it a little more clear.
This should be done prior to doing anything within the guide.
First, connect your phone to your computer and mount your sd card. This can be done by connecting the usb cable, then on your phone, drop down the menu and chose, connect to p.c., Mount SD card. Make a folder and backup your entire sd card to this folder. Once done, delete everything off the card. if you don't, you will run into format and partitions errors later in the guide.
Eject the sd card on the computer, and end usb sharing on the phone. remove the USB cable from the computer.
Next, on the phone Go to Settings > Applications > Development>USB Debugging
Make sure that USB debugging is NOT CHECKED. If its checked later in the guide you will run into errors pushing the files onto the phone.
At this point you can start the guide from the beginning, under the main heading Root Hero [MAC]
I am running OSX 10.6.2 so i ran into a couple of issues.
Next. Under the part where you have to create the .bash file. This file should be saved in your user folder.
/Users/USERNAME where USERNAME is the name of your user account.
For instance my User account is Hamspiced so my user folder is:
/Users/Hamspiced/
when saving the file, uncheck "if no extension is provided, use .txt".
Next, I couldn't copy paste the code because it wasn't parsed properly. This is what i had to do.
And this should be a direct copy paste into terminal. If you don't know how to access terminal click the spyglass in the upper right hand of the screen, and type in terminal. then you should be able to directly copy paste this text.
Code:
cd /Applications/AndroidSDK/tools
./adb push asroot2 /data/local
./adb shell chmod 0755 /data/local/asroot2
./adb shell
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4775 su
exit
exit
As stated you should have root access on the phone. you can verify this by downloading Terminal emulator from the Market, then running the app. Once inside the app if you hold Menu, you should bring up the onscreen keyboard. if you type in "su" (stands for super user) it will change the prompt from $ to #. If yours does not change, start over, something went wrong. If it did change then you can proceed to the next part of this guide.
Next the guide is trying to put the recovery Image to your phone. This doesnt restore your phone, it just puts the recovery portion to it, and it allows you to do all the cool things to your phone, like allow you to create backups, restore backups, and load customs roms.
again i ran into issues with parsing the correct format so these are copy pastes from terminal.
Code:
./adb push recovery-RA-heroc-v1.2.3.img /sdcard/
./adb shell
su
flash_image recovery /sdcard/recovery-RA-heroc-v1.2.3.img
exit
exit
adb shell reboot recovery
If you get an access denied error pushing the recovery image, its because you had debugging turned on prior to connecting your phone to the computer. it must be off, then turned on once the phone is connected.
This will result in headaches, and endless google searching with no results.
Follow the rest of the guide regarding the Nandroid backup this backs up the entire phone settings. you want to save the raw phone backup as well as the backup after you load the rom. both are incredibly important!
Prepare SD Card for Apps2sd….
If when you checked Disk Utility and your SD card didnt partition properly follow these steps.
You must erase everything on your sd card for these steps to work. I ran into errors creating the partition. What i had to do was in the recovery mode chose factory recovery. when the phone restarted i had to go to Settings>Security>Factory Data Reset.
This restored EVERYTHING. THe phone, Sd Card, Etc. Everything was lost, however since in the begining, we made a backup of the SD card, and then we made a backup of our phone, we are fine.
Restart the phone in recovery mode once this finishes and restarts. (Hold Home and Power to turn on)
Next chose Part SD: fat32+ext2+swap this will partition the card properly. Then choose restart phone.
Once the phone restarts, we have to go through the normal steps that we did once we first received the phone for its first bootup. connect it to the computer, transfer over the Nandroid backup that should be saved from the first time you saved it on your phone. then restart the phone again in recovery mode.
Now you need to restore the nandroid backup. since you transferred it over, its the only nandroid backup there is, it will restore the phones origional settings. from here you can load the official MoDaCO rom fine on the SD card that is now formatted properly.
These are about all the issues and resolutions i ran into. Hopefully it helps someone else.
Guess it's subjective. I think I haven't turned off USB Debugging since shortly after I got the phone and didn't run into any problems. It's always on before I plug it in and I haven't ran into any errors while pushing a file to my sd card. Also didn't erase my sd card before I formatted (did back it up though of course) and everything went smooth. Dunno. It's always good to hear from diff people though. Also just edited my thread, thanks for the heads up.
need help rooting htc hero from sprint
i have 1.5 firmware bb version is 1.04.01.09.21 kernel version 2.6.27-533ce29dhtc [email protected] build number1.56.651.2 cl85027software 1.56 cant get root on this device can someone please help me
quis5550 said:
i have 1.5 firmware bb version is 1.04.01.09.21 kernel version 2.6.27-533ce29dhtc [email protected] build number1.56.651.2 cl85027software 1.56 cant get root on this device can someone please help me
Click to expand...
Click to collapse
Try here
http://forum.xda-developers.com/showthread.php?t=581686&highlight=root+mac
First, excellent guide! Personally, I used Universal Androot (snipurl.com/uaroot) to root my Hero, but this was a huge help in getting the SDK installed!
I'm running into a problem while trying to do the Nandroid backup. When I try to flash the recovery image, I get the following error message....
AJBlue98$ ./adb shell
$ cd /sdcard/
$ su
# flash_image recovery recovery-RA-herocv1.6.2.img
flash_image: not found
Click to expand...
Click to collapse
I even try the command with the leading "./" and I get essentially the same thing...
# ./flash_image recovery recovery-RA-herocv1.6.2.img
./flash_image: not found
Click to expand...
Click to collapse
I'm running the latest official Sprint 2.1 ROM on my Hero and Terminal on Mac OS X Snow Leopard 10.6.4 on a late-2009, 17 in. MacBook Pro. Oh, and I installed the Android SDK into another directory (had it installed before I found this tutorial), so here's my $PATH...
-bash: type: /opt/local/bin:/opt/local/sbin:/Users/AJBlue98/soylatte/bin:/Users/AJBlue98/android-sdk-mac_86:/opt/local/bin:/opt/local/sbin:/opt/local/bin:/opt/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/texbin:/usr/X11/bin: not found
Click to expand...
Click to collapse
Am I missing something? I'll really appreciate the help!
—Adam
ajblue98 said:
First, excellent guide! Personally, I used Universal Androot (snipurl.com/uaroot) to root my Hero, but this was a huge help in getting the SDK installed!
I'm running into a problem while trying to do the Nandroid backup. When I try to flash the recovery image, I get the following error message....
I even try the command with the leading "./" and I get essentially the same thing...
I'm running the latest official Sprint 2.1 ROM on my Hero and Terminal on Mac OS X Snow Leopard 10.6.4 on a late-2009, 17 in. MacBook Pro. Oh, and I installed the Android SDK into another directory (had it installed before I found this tutorial), so here's my $PATH...
Am I missing something? I'll really appreciate the help!
—Adam
Click to expand...
Click to collapse
yeah, you're missing the "flash_image" binary on your phone lol search xda for it and push it to /system/bin, then try the command again.
regaw_leinad said:
yeah, you're missing the "flash_image" binary on your phone lol search xda for it and push it to /system/bin, then try the command again.
Click to expand...
Click to collapse
Thanks, regaw_leinad, for the lead! I found a copy of the flash_image file and copied it to my Android SDK folder, but when I try to push it to my phone, I get this:
AJBlue98$ ./adb push flash_image /system/bin
failed to copy 'flash_image' to '/system/bin/flash_image': Permission denied
failed to copy 'flash_image' to '/system/bin/flash_image': Read-only file system
Click to expand...
Click to collapse
(I rebooted the phone and tried again after my original post. The error message changed. BTW I'm connected via USB with debugging turned on and "Charge only" selected as my connection type.)
I've tried running adb as root, but I get this:
AJBlue98$ ./adb root
adbd cannot run as root in production builds
Click to expand...
Click to collapse
Again, any help will be greatly appreciated!
—AJBlue98
ajblue98 said:
Thanks, regaw_leinad, for the lead! I found a copy of the flash_image file and copied it to my Android SDK folder, but when I try to push it to my phone, I get this:
(I rebooted the phone and tried again after my original post. The error message changed. BTW I'm connected via USB with debugging turned on and "Charge only" selected as my connection type.)
I've tried running adb as root, but I get this:
Again, any help will be greatly appreciated!
—AJBlue98
Click to expand...
Click to collapse
ok type
adb shell
then
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
to mount it as r/w
then try the flash image command again.
Adb root or adb remount won't work, because your boot.img isn't patched yet.
regaw_leinad said:
ok type
adb shell
then
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
to mount it as r/w
then try the flash image command again.
Adb root or adb remount won't work, because your boot.img isn't patched yet.
Click to expand...
Click to collapse
Okay, I did that. I'm still charge-only and debugging turned on, and here's what happened.
(N.B.: I'm on a Mac, so I have to include "./" before running an application in the current directory. Also, I'm including "AJBlue98" in front of my "$" prompts to differentiate my Mac's local prompts from the adb shell prompts.)
AJBlue98$ ./adb shell
$ mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
mount: Operation not permitted
Click to expand...
Click to collapse
So I tried these few things...
$ su
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
# cd /sdcard/
# mv flash_image /system/bin
failed on 'flash_image' - Cross-device link
# exit
$ exit
AJBlue98$ ./adb shell su mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
Permission denied
AJBlue98$ ./adb push flash_image /system/bin
failed to copy 'flash_image' to '/system/bin/flash_image': Permission denied
Click to expand...
Click to collapse
Now I'm completely flummoxed. As always, please help and thanks in advance!
Update: I got frisky, so I tried this, just for the heck of it...
AJBlue98$ ./adb shell
$ su
# cd /sdcard
# ./flash_image recovery /sdcard/recovery-RA-heroc_v1.2.3.img
./flash_image: permission denied
# chmod 755 ./flash_image
# ./flash_image recovery /sdcard/recovery-RA-heroc_v1.2.3.img
./flash_image: permission denied
# su ./flash_image recovery /sdcard/recovery-RA-heroc_v1.2.3.img
Permission denied
Click to expand...
Click to collapse
Update 2:
I got some help at irc.twit.tv from a good soul in the #twitlive channel, who pointed me to ROM Manager (downloadable from the Market). That just did the whole backup, hey-presto, no flash_image BS required.
Thanks for the help anyway, all!
ajblue98 said:
Okay, I did that. I'm still charge-only and debugging turned on, and here's what happened.
(N.B.: I'm on a Mac, so I have to include "./" before running an application in the current directory. Also, I'm including "AJBlue98" in front of my "$" prompts to differentiate my Mac's local prompts from the adb shell prompts.)
So I tried these few things...
Now I'm completely flummoxed. As always, please help and thanks in advance!
Update: I got frisky, so I tried this, just for the heck of it...
Update 2:
I got some help at irc.twit.tv from a good soul in the #twitlive channel, who pointed me to ROM Manager (downloadable from the Market). That just did the whole backup, hey-presto, no flash_image BS required.
Thanks for the help anyway, all!
Click to expand...
Click to collapse
sweet, glad you got it worked out
there were a few errors in what you did above, but looks like you got everything working without it, so that's good
DO NOT POST IN THIS THREAD BEFORE READING THE WHOLE POST
PLEASE ADD GUIDES TO COMMON ISSUES YOURSELVES
To my recollection, the previous WM Guides thread was successful.. so we'll be moving on to android as well - from beginner to pro.
I hope this thread will provide answers to a decent percentage of your questions.
Please hold until guide collecting is finished..
In the meanwhile you are ALL invited to send me links or full guides to add to this thread.. remember, we are all about sharing.
COMING SOON! (in the meanwhile, you've got a great battery life guide at http://forum.xda-developers.com/showthread.php?t=471521 - be sure to thank BruceElliot for it!)
also, if you decide to post a guide, please keep the guide as neat as possible, with a title containing the LEVEL ([BEGINNER], [INTERMEDIATE], [PRO]) and the commonly searched words so that people who look for it can find it easily. (if you can, use the same color (dark orange) and same size (4) and Bold.. for the main title.. tho that's not a must )
post #2. [BEGINNERS+INTERMEDIATE] Replacing System Files using Android Commander
post #3. [EVERYONE] ADB Workshop by Adrynalyne and Guide by Captainkrtek
post #4. [QUICK FAQ's] Common QnA's for beginners by Timmymarsh (work in progress)
[BEGINNERS] Replacing system files using Android Commander
Replacing system files using Android Commander:
(This post was formally based in the HD2's RTL support thread and revolved around our need to replace frameworks)
so:
1. Download the android SDK from: http://dl.google.com/android/android...08-windows.zip
2. EXTRACT(!!!) the android-sdk-windows to c:\
(make sure you extract the dir - not run the setup from inside the zip file)
3. install Android Commander from http://androidcommander.com
4. Connect your device and make sure it's set to Debugging mode in /settings/applications/development/
5. You might have to set a dir containing your adb.exe file. set it to c:\android-sdk-windows\tools\
6. You will see a Total Commander-like interface. you can then copy the framework.jar file to the correct directory (there's no difference between SD android builds and androids in ROM - the system dir will be shown the same way)
a. Yes, you can replace/delete system files while android is running.
b. (for androids running from SD) Any file copied to /sdcard/android/root/system/X will be copied to /system/X in the system file. The sdcard/android root dir is JUST LIKE your root in ROM androids.
c. Make sure you either created a backup or verified a match in any other way before replacing files like frameworks, zimage, modules, etc.. your android might not boot afterwards (I keep all system.ext2 files backed up so that i can restore them incase i screw something up.)
enjoy
[EVERYONE] ADB Workshop by Adrynalyne and Guide by Captainkrtek
This following guide was rewritten by Captainkrtek, please make sure to thank him for it
Original Post:
(http://forum.xda-developers.com/showthread.php?t=879701)
This workshop was held in #android-learning on irc.freenode.net by XDA Member Adrynalyne. All credit to him for this guide, I simply am taking it and turning it into a guide. Here we go!
You can find the raw IRC log here
Good evening folks, and welcome to my ADB workshop. This is by no means a full explanation on the subject, but more of a crash course to help folks get up to speed, and get more from their devices. There may be some things you already know here, so please be patient and respect those who do not.
Reference Files
http://adrynalyne.us/files/How to install adb.pdf
http://adrynalyne.us/files/Using ADB.pdf
So, lets just start with the basics.
What is ADB?
ADB stands for the android debugging bridge and is used for testing and debugging purposes by developers.
However, we like to get more out of our devices, and its a great way to fix things.
Knowing adb can mean the difference between a paperweight and a working phone.
So, to start with, we will look at installing ADB.
Generally speaking, the Sun/Oracle JDK is required to run all SDK functions.
ADB is but one tool in the SDK arsenal.
So, we begin by downloading and installing the JDK. This can be found here:
https://cds.sun.com/is-bin/[email protected]_Developer
Choose your OS, download and install. I recommend that 64 bit users use the regular x86/32 bit version as well.
Moving ahead, we download the Windows sdk from here:
http://dl.google.com/android/installer_r08-windows.exe
Due to already installing JDK, you won't be stopped by the install process.
Now, if you notice, I installed it to:
C:\android-sdk-windows
I did this because it makes things easier when setting up path variables.
I encourage everyone to do the same, but obviously it is not required.
So, this SDK is handy, but is only good up to 2.2. We want the latest and greatest! (Well I do)
So, we navigate to:
C:\android-sdk-windows\
and we run SDK Manager.exe
If you notice in your PDF file for installing adb, you will notice that you can update, and I made a choice not to include earlier sdk versions.
I won't go into full detail on that, but depending on the version of SDK you have, 8 or 9, it WILL make a difference in using adb.
By default, for version 8 adb.exe resides in C:\android-sdk-windows\tools
By default, for version 9 adb.exe resides in C:\android-sdk-windows\platform-tools
We will assume version 9 in this guide
Really, the SDK is installed and adb is usable right now, but in my humble opinion, its not enough
I like the ability to use adb in ANY directory on my machine.
To do this, we edit Windows's environment variables.
Specifically, the system path.
To do this, we click on start, or the orb (depending on OS), and right click on Computer, left clicking on properties in the menu.
If its windows XP, I believe it brings you into advanced system properties immediatly. Vista and 7 need a second step.
On the left hand side, as you notice I have highlighted in the pdf, left click advanced system settings.
Under advanced tab, we left click environment variables...
There are two boxes here.
We are concerned with system variables, however.
So we scroll down the list and highlight path and click edit.
Ignoring all the extra stuff in here, make sure you are at the end of the line, and type
Code:
;C:\android-sdk-windows\platform-tools
The semicolon allows us to separate it
from the previous path statement.
Click ok all the way out.
We now have ADB setup globally. We can use cmd.exe (I use powershell) and no matter what directory we are in, adb is recognized.
If it is not, make certain you entered the path into system variables, and made no typos.
If you installed to a different location, you will need to adjust the path accordingly.
This concludes the section on installing the Android SDK to use ADB.
This next section will be on using ADB, so please open that pdf now.
Now, this applies to any OS, not just Windows.
Well, with the exception of the USB drivers.
I will not go too much into that, but if you take a look at the PDF, it goes through installing usb drivers for the sdk, and how to download them.
Fiarly straightforward, in that rspect.
Now, to setup our phones to use with the SDK and ADB, we must change some settings.
First, we go to menu softkey, then settings.
We scroll down to Applications and tap it.
Under Development, we will check Enable USB Debugging. Please note the SGS phones are different in this respect.
The USB cable must be unplugged before enabling or disabling this setting.
Once this is done, we are now ready to play with adb
One quick note: If you get device not found/conencted, please reboot your phone. DJ05 has a quirk in it where ADBD randomly crashes on boot.
A reboot will fix this
ADBD= ADB Daemon
Ok, continuing on.
Lets look at installing applications. This is also known as sideloading.
Unlike installing from the SD card, it does not require unknown sources to be enabled.
The command for this is
Code:
adb install packagename
This assumes that you are working from the directory where the file is located.
This will install the application to /data/app.
It will also show sometimes useful errors if install fails.
That is not something you will see from the Android GUI.
Now, a lot of us have probably deleted files with apps like Root Explorer. While this isn't really a bad thing, it leaves behind databases and data for the application removed.
This is where the 0kb applicaiton entries come from.
If you take that application entry name, you can uninstall the extra data via adb.
First we go to the adb shell which logs into the phone.
Code:
adb shell
If we end up with a $, we will want admin rights, in many cases. This is not one of them, I don't beleive.
To get admin rights, you want to type
Code:
su
Look at your phone if this is the first time, it may prompt you to allow access. Else you will get permission denied.
If you are not rooted, this will not work either.
Ok, now that we are logged in, we will type
Code:
pm uninstall packagename
where packagename is the name of the 0kb listing.
Now this seems like a pain in the a** and I agree.
HOWEVER
There will be a time where Manage applications crashes when you try to uninstall it from the phone. In this case, a factory reset, or this method is the only effective way to fix the problem.
Moving on.
How many of us have removed system applications or renamed them? Did you know that you can simply disable them from the system?
Code:
adb shell
su
pm disable appllicationname
This will disable it, and the system will ignore it.
This can be seen as safer than deleting or renaming things, but your mileage may vary.
On the other hand, you can also re-enable these applications.
Code:
adb shell
su
pm enable applicationname
Please note: Not all applications will properly re-enable. I believe a factory reset or reinstall of said application will fix the issue.
Also, application names are absolutely case sensitive.
*nix based Operating Systems see the letter 'a' and 'A' as two different things.
when you log into adb shell, you are playing by android rules
Ok, a lot of us tweak and mod our phones and turning off the device to get to clockwork recovery, or battery pulls, or multiple button holds to get into Download mode are troublesome and annoying at best.
ADB can help us here.
Here, we do not need to be logged into the shell
If we want to merely reboot the phone:
Code:
adb reboot
If we want to go to recovery (works well with voodoo5)
Code:
adb reboot recovery
If we want to go to Download Mode because we need Odin, heaven forbid:
Code:
adb reboot download
Its instant. No waiting on animations or anything else.
Its also handy if Android has locked up, but yet still works in adb.
I for one hate taking my case off to battery pull.
So now we move on to pushing and pulling files.
Sometimes, I don't feel like mounting my sd card to copy a file over to my phone.
I can use this command to push a file straight to my sd card:
Code:
adb push filename /pathtodirectoryonphone
So for instance, if I have test.txt that I want to send, I would type:
Code:
adb push test.txt /sdcard/
and there it goes.
Ok moving on
Pushing files can be done to any directory, however, some are protected.
For instance, /system is going to give you a permission denied or a read only filesystem error.
To get around this, the easiest thing to do is push the file to your sdcard, then log into the shell:
Code:
adb shell
Code:
su
We will then mount the system as writable
Code:
mount -o rw,remount /dev/block/stl9 /system
Then we can use something like
Code:
cp /sdcard/test.txt /system/app/test.txt
cp stands for copy
and it requires the path of the file and destination path. The name of the file is optional
When you copy it, you can rename it to whatever you like.
For instance, if we wanted to backup a file
Code:
cp /sdcard/test.txt /sdcard/backuptest.txt
Now, lets assume you do not have busybox installed.
You non rooted users will not.
Then you must use a slightly more complicated command called dd
This is used like this:
Code:
dd if=/sdcard/test.txt of=/system/app/test.txt
if is for inputfile
of= output file
Not every user friendly, but probably one of the safer copy commands.
Ok, moving on to pulling files.
Lets say you want to get a file from your phone, to modify, backup, etc.
To do this, we simply use adb in this manner:
Code:
adb pull /pathtofile/filename destinationname
For instance, if I wanted to backup ADW launcher in system/app
I would do this
Code:
adb pull /system/app/ADWLaucnher.apk ADWLauncher.apk
And it will pull the file from the phone and put it in the current directory.
Like above, you can specifcy where it goes.
pushing files to the sdcard, it seems prudent to talk about changing permissions.
sdcards are typically fat32, which destroys permisisons, and Android is heavily permission based.
So if you push an application to your sd card, then try to copy it to /system/app/ bad things are going to happen, or the app may not even show up.
So in that case, we use something called chmod.
This is used in this manner
Code:
adb shell
su
chmod 755 /pathtoapplication/applicationname
Keep in mind
you dont want to do this while its still on your sd card.
an example
Code:
adb shell
su
chmod 755 /system/app/ADWLauncher.apk
755 is good for applications and script files.
Just a couple more topics to cover.
Lets go over deleting files.
This becomes especially handy for removing rogue applications.
To do this, we must be in the adb shell.
Code:
adb shell
su
rm /system/app/ADWLauncher.apk
You may need to remount system as writable with:
Code:
mount -o rw,remount /dev/block/stl9 /system
That applies when using chmod as well.
So what I did above was delete ADW Launcher from system/app
However, what if I wanted to delete the entire contents of a directory?
Same thing as before, except
Code:
adb shell
rm -f /data/dalvik-cache/*.*
I just cleared my dalvik-cache with that command
very quick, very effective.
If you just tried that, please reboot your phone now
Ok....this leaves us with the final topic: logcat
logcat allows us to log what the OS is doing, and possibly delve information for when things are not working
its quite simple Reading it is another.
To use logcat
Code:
adb shell
logcat
To logcat to a certain file do
Code:
adb shell
logcat > /sdcard/logcat.txt
Now we let the log settle down to a reasonable amount of data coming in and not a wall of scrolling, then start the app in question. When it gives an error, we hit ctrl-C and kill the adb shell session.
This should have captured enough data to see the error. Now, I prepared an example. A user came to me on IRC, and Google Maps was force closing. Clearing data didnt fix it, Clearing dalvik-cache, and fix permissions did not fix it. In this case, the user did not know how to use adb So I had him grab an app called alogcat from the market and email me the log. This is also a very valid method.
this file explains what the problem was, and highlights what to look for as an example.
http://adrynalyne.us/files/logcat.pdf
___________________________________________________________________
This concludes the guide from Adrynalyne, there will be more workshops such as this one in irc.freenode.net #android-learning.
Thanks to everyone in #samsung-fascinate !
QUICK FAQ's
sources: Q&A Section, The Weekly Q&A Section by XDA News Writers (thanks guys)
Q: ‘Is there any way to block specific apps from using my data connection?’
A: Try the Droid Wall application.
Q: ‘I read how you can make changes in the build.prop file on my Android device. How exactly do I get to it?’
A: Install ASTRO file manager, browse to /system, long press on build.prop – Edit – Copy. Press on the home icon then Edit icon – Paste. Connect sd card, edit it, and paste it over from where you copied build.prop
Q: What happens if I update my phone? will I need to re-root it and get the ROM again? will all of my applications get erased? If so, is there a way around this?
A: You will lose your root, but not apps if it is just an update.
Q: I just tried to flash a ROM from recovery on my Android phone and got “Verification Failed, Installation Aborted” What happened?
A: Before you can flash a custom ROM the .zip file must be digitally signed in the ROM kitchen, if unzipped and re-zipped it will lose its verification, this happens often using the Safari browser as it likes to decompress .zip’s. Or if your download is corrupted (download the ROM again) it will fail the Verification.
Q - HTC Location Widget shows "map data unavailable"
A - On the widget, click the pin/then click the windows button/click get more/scroll to download maps/download relevant map (care, maybe a big file). Now exit and click onto map, your location should now be visible :)
Q:So, I moved all the apps on the SD, but is still not enough. How can I free some memory? I could delete the cache of the older upgrade or something else?
A:Do you have pictures and videos? If so, check if they are on the SD card and not on your internal memory. Cleaning your cache helps, and try deleting your text messages threads.
Q: ‘What exactly is a kernel and what are the benefits in changing it?’
A: A kernel is a bridge between the applications and the actual data processing done at the hardware level. The kernel’s responsibilities include managing the system’s resources – the communication between hardware and software components. Flashing different kernels gives you different operating speeds, better battery life, the ability to overclock, and more.
Android control other device with IOIO Board.
It use ADB.
http://androidcontrol.blogspot.com/2011/10/ioio-board-for-android-control-io.html
timmymarsh said:
QUICK FAQ's
sources: Q&A Section, The Weekly Q&A Section by XDA News Writers (thanks guys)
Q: ‘Is there any way to block specific apps from using my data connection?’
A: Try the Droid Wall application.
Q: ‘I read how you can make changes in the build.prop file on my Android device. How exactly do I get to it?’
A: Install ASTRO file manager, browse to /system, long press on build.prop – Edit – Copy. Press on the home icon then Edit icon – Paste. Connect sd card, edit it, and paste it over from where you copied build.prop
Q: What happens if I update my phone? will I need to re-root it and get the ROM again? will all of my applications get erased? If so, is there a way around this?
A: You will lose your root, but not apps if it is just an update.
Q: I just tried to flash a ROM from recovery on my Android phone and got “Verification Failed, Installation Aborted” What happened?
A: Before you can flash a custom ROM the .zip file must be digitally signed in the ROM kitchen, if unzipped and re-zipped it will lose its verification, this happens often using the Safari browser as it likes to decompress .zip’s. Or if your download is corrupted (download the ROM again) it will fail the Verification.
Q - HTC Location Widget shows "map data unavailable"
A - On the widget, click the pin/then click the windows button/click get more/scroll to download maps/download relevant map (care, maybe a big file). Now exit and click onto map, your location should now be visible :)
Q:So, I moved all the apps on the SD, but is still not enough. How can I free some memory? I could delete the cache of the older upgrade or something else?
A:Do you have pictures and videos? If so, check if they are on the SD card and not on your internal memory. Cleaning your cache helps, and try deleting your text messages threads.
Q: ‘What exactly is a kernel and what are the benefits in changing it?’
A: A kernel is a bridge between the applications and the actual data processing done at the hardware level. The kernel’s responsibilities include managing the system’s resources – the communication between hardware and software components. Flashing different kernels gives you different operating speeds, better battery life, the ability to overclock, and more.
Click to expand...
Click to collapse
Thank you for your patience and taking the time to answer those questions. I loved your simple and easily digestible format.
There is a note
*nix based Operating Systems see the letter 'a' and 'A' as two different things.
when you log into adb shell, you are playing by android rules
Click to expand...
Click to collapse
this note is all wrong..
1. linNUX is not *NIX.
2. Mac OS-X is a *NIX OS, it is based upon UNIX, they use their own variant called Darwin. Darwin does not require capitolization.
3. The word should be POSIX. Linux is POSIX compliant and POSIX defines the capitolization standardards
soft brick
Taioba said:
Is there any way to use ADB even though I can not enable USB debugging by the android?
I have an Atrix with soft-brick. How can I restore a file (framework-res.apk) knowing that my USB debugging is off?
I can enable ADB via fastboot?
Thanks!
Click to expand...
Click to collapse
I found this for atrix 4g....
http://forum.xda-developers.com/showthread.php?t=965546
hope it helps
knoknot said:
i have a bricked s2 not so sure how to go about reviving it via adb
Click to expand...
Click to collapse
check this thread
http://forum.xda-developers.com/showthread.php?t=1237815
thanks. searched for that
Thanks for it.
Great Guys............ :good:
Thanks for sharing.
Thanks for sharing this guild :d, i am new member for reccod
Great job~ Sometimes could be used this.
I'm using Windows 10 RTM and I've set the path, yet I still get the "unrecognized application" error in the command console. What am I missing?
Nevermind, a restart fixed it. Used to be you didn't have to.... sheesh.
nir36 said:
Replacing system files using Android Commander:
(This post was formally based in the HD2's RTL support thread and revolved around our need to replace frameworks)
so:
1. Download the android SDK from: http://dl.google.com/android/android...08-windows.zip
2. EXTRACT(!!!) the android-sdk-windows to c:\
(make sure you extract the dir - not run the setup from inside the zip file)
3. install Android Commander from http://androidcommander.com
4. Connect your device and make sure it's set to Debugging mode in /settings/applications/development/
5. You might have to set a dir containing your adb.exe file. set it to c:\android-sdk-windows\tools\
6. You will see a Total Commander-like interface. you can then copy the framework.jar file to the correct directory (there's no difference between SD android builds and androids in ROM - the system dir will be shown the same way)
a. Yes, you can replace/delete system files while android is running.
b. (for androids running from SD) Any file copied to /sdcard/android/root/system/X will be copied to /system/X in the system file. The sdcard/android root dir is JUST LIKE your root in ROM androids.
c. Make sure you either created a backup or verified a match in any other way before replacing files like frameworks, zimage, modules, etc.. your android might not boot afterwards (I keep all system.ext2 files backed up so that i can restore them incase i screw something up.)
enjoy
Click to expand...
Click to collapse
Thanks, this Guide is very informative
Help with LG D722
I'm using LG D722 phone and I somehow unlocked bootloader and installed twrp recovery. I backed up Lollipop that's what I'm using and i want to restore custom ROM
I know I need to install Google Apps after installing Custom ROM. But Do I also need to install Modem files on my device ? Because I can't find them on XDA Forums. Please give me a link or something. The help is not just appreciated but seriously needed.
Success. Thanks
Hello, I walk testing one recovery but I'm booting before flashing, the question is, will the recovery feel same when booted vs flashed? I've booted and used to flash a pair of zips but felt very laggy and bugged although did the work right. Thanks
Edit: solved, tried myself
Sent from my SHIELD Tablet K1 using XDA-Developers mobile app
http://forum.xda-developers.com/showthread.php?t=872128&page=2