I have the DAXIAN T32+/X999+ and the proximity sensor was not working and was reading in the forums to do a restart, and now the phone does not see my 4gb sd card.... looking into the forum about the memory problem someone said something about getting a driver so the phone would see the 4gb sd card could someone Help me find that file thank.
microsdhc
there is a way to do that the phone can even read 32gb but you need to look for the microsd hc hack for windows mobile look at the forum for it.
its really esay i got mine whit 8gb.
here are the instruccions for the installation in case you need them:
SDHC Driver
1) Install SDHC.cab
2) Overwrite /Windows sdbus.dll y sdmemory.dll
3) Install Certs.cab
Soft reset.
Related
Hello
Anyone got the SD HC (High Capacity) drivers for OMAP850/Tornado? If yes could please attache here or contact me via PM?
i don't think you'll find that driver here...!!! but god luck...!!
Thanks !
Let's hope that some magic will happen
bsquare.com/about/story.asp?PressID=451
DSF said:
Thanks !
Let's hope that some magic will happen
bsquare.com/about/story.asp?PressID=451
Click to expand...
Click to collapse
..and some luck comes over us, if we need a special Hardware!Some HTC Devices handles SDHC, others do not...is this possible?Or not?
Extracting and installing the driver may be possible, Omap850 is there, but what about the CardSlot? Ive heard, there are some Specifications for SDHC...
DSF said:
Thanks !
Let's hope that some magic will happen
bsquare.com/about/story.asp?PressID=451
Click to expand...
Click to collapse
bellevue Washington..I live not too far from there, i live in Everett.
SDHC driver
I happened to see a file called omap850_sdhc.dll in your own post:
http://forum.xda-developers.com/showpost.php?p=1407553&postcount=856
You opening this thread means this one doesn't work?
I already baught a 4 GB SDHC card a month ago to find out it doesn't work in any device i have... damn. Hope somebody can get a hold of the driver for us.
May not work..
...because ive read the sdhc.dll means HostControl and not HighCapacity....
yes arpy is right. i was misinformed. however, with that rom my system does not lag when writing (start & en) to card/
guys i've found some SD High Capacity dlls here:
http://forum.xda-developers.com/showpost.php?p=1462587&postcount=15
Install the cab (Storage.. or copy the files from the cab manually to \Windows) . I've tried it and I can use the card (with other dlls, eg from spv c100 or iphone rom , my storage card was not detected) [ however, the same system lag while writing to storage card]
I don't have a SDHC card to test.. so if someone has, please test it and report.
DSF said:
yes arpy is right. i was misinformed. however, with that rom my system does not lag when writing (start & en) to card/
guys i've found some SD High Capacity dlls here:
http://forum.xda-developers.com/showpost.php?p=1462587&postcount=15
Install the cab (Storage.. or copy the files from the cab manually to \Windows) . I've tried it and I can use the card (with other dlls, eg from spv c100 or iphone rom , my storage card was not detected) [ however, the same system lag while writing to storage card]
I don't have a SDHC card to test.. so if someone has, please test it and report.
Click to expand...
Click to collapse
Hello,
Tried it on my Tornado, but doesn't work with SDHC. It doesn't detect the Storage Card. It does work with a 2 GB non-SDHC card. So no harm to install it, but you still cannot read SDHC. damn.
hi and thanks for testing
.. strange.. maybe we need newer version of omap850_sdhc.dll?
Unless I'm missing something here: The file you had linked was from a post in the Universal forums. The Universal doesn't have an OMAP850 cpu but an Intel Bulverde. Since the driver support is cpu dependent, it was to be expected that the one for the intel won't work for the omap.
Yes, but I can see and use the storage card with these dlls.
I've tried to copy sdbus.dll & sdmemory.dll from other WM5 build (omap850 smartphone) and the phone doesn't recognize the storage card anymore. After deleting these dlls (when deleting , the original file from ROM comes back) and rebooting , storage card is avaiable again.
Hi everybody
i've flashing my V1640 with ROM version 2.05.00 WWE and now it's impossible with the file explorer to access at my SD card
The size is 2Go and when i'm using my card with my computer, it's working !
Anybody can help me ?
Thanks a lot
I have the same problems with a 2GB Kingston SD card. It was always a bit unstable with the O2 rom, but now it locks up on the WM6 rom.
To explain what it is doing: When I insert the card, no problem, but when I try to browse to the card contents via file explorer (or Windows Media Player for example) the app locks up and after a while the Universal reboots. It also reboots as soon as you eject the card.
I haven't checked the card on a PC but I don't see any reason why it wouldn't work.
I am currently using my spare Kingston 1GB SD card without problems.
Hello zOmb13e
So i'm trying to use an older 256 Mo SD card and it's working perfectly ! you're right the 2go does'nt work with the WM6.
So now i must buy a 1Gb SD card
thanks a lot for your answer
pierre-tho said:
Hello zOmb13e
So i'm trying to use an older 256 Mo SD card and it's working perfectly ! you're right the 2go does'nt work with the WM6.
So now i must buy a 1Gb SD card
thanks a lot for your answer
Click to expand...
Click to collapse
It is more likely that the Rom you have flashed has SDHC support built in.
These drivers have issues with SOME non SDHC Cards.
Either search for JWrightMCPS's SDHC Driver Rollback cab, (I think there is a link in his post) or upgrade to his latest Rom which supports both, or wait for Laurentius and mine new update (release date 1st November) or buy an SDHC compatible card.
Cheers,
Beaty
And working in SAMSUNG SGH-i600 WM6 with card Sandisk MicroSD HC 8GB http://forum.xda-developers.com/showthread.php?t=388364
Mis pequeñines
Tell us more!!
Hoe exactly did you apply this driver and wich driver did you use?
The HTC or this for Fujitsu Siemens?
Isn't thoose the same things?
IS there any issues like wifi not working or Active Synk synchronization problems?
Yes, the driver fujitsu siemens works in Samsung SGH-I600 WM6 and it does not have problems of wifi and active sync, working all
http://forum.xda-developers.com/attachment.php?attachmentid=83392&d=1209243092
THANKS GreateVK and FreePK
Final questions:
Does it needs a hard reset of the device when applying?
Can you removed it afterwards if something gets wrong?
Thankkkks
Not hard reset only it requests to reinitiate device, after installing to driver, and it is possible removed in removing programs.
Sorry by my English
Cool looking forward to test it!
When applied this driver works with non SDHC card too right?
Now I'm having 2GB Sandisk micro sd card, if I apply this SDHC driver, this card (2GB non SDHC) will work with no complications, isn't so?
I make a test now with one microsd 256mb and she recognizes, no problem
Hey guys - Thanks a million for this. I installed on my blackjack WM5 and works fine. However, it is only showing 4gb total storage - Is there something I need to do differently to make the full 8Gb available?
I am guessing I will need to upgrade to WM6 - If so, can anybody point me in the direction of the upgrade for an Australian version? I have checked the promotion site http://www.samsungmobile.com/promotion/i600/index.jsp but Australia is not listed and my version number i600DTGE2 doesnt work.
Cheers
Brenden
Help.
I get the message:
The installation on the SDHC driver was unseccessfull!
I tried to install it from the phone memory and from the memory card, still no result.
What's going wrong?
liquidsky2037 said:
Hey guys - Thanks a million for this. I installed on my blackjack WM5 and works fine. However, it is only showing 4gb total storage - Is there something I need to do differently to make the full 8Gb available?
I am guessing I will need to upgrade to WM6 - If so, can anybody point me in the direction of the upgrade for an Australian version? I have checked the promotion site http://www.samsungmobile.com/promotion/i600/index.jsp but Australia is not listed and my version number i600DTGE2 doesnt work.
Cheers
Brenden
Click to expand...
Click to collapse
hello
i have something for you --> http://wiki.modaco.com/index.php/Samsung_i607#Latest_Official_ROM_Downloads
this is latest update for black jack
look on this side .... device will be much faster with wm6 /wm6.1 not official
Hi
I have a small problem, my i600 doesn't see sd cards at all. I was hoping this driver would help but it doesn't. My phone always worked, and than suddenly it doesn't show a card anymore.
I tried on WM5, WM6, 2 microSD cards (1gb and 2gb), and an HDSD 8gb card, but still nothing
patron55 said:
Hi
I have a small problem, my i600 doesn't see sd cards at all. I was hoping this driver would help but it doesn't. My phone always worked, and than suddenly it doesn't show a card anymore.
I tried on WM5, WM6, 2 microSD cards (1gb and 2gb), and an HDSD 8gb card, but still nothing
Click to expand...
Click to collapse
Hello
Because you have card reader broken
juanfervs said:
And working in SAMSUNG SGH-i600 WM6 with card Sandisk MicroSD HC 8GB http://forum.xda-developers.com/showthread.php?t=388364
Mis pequeñines
Click to expand...
Click to collapse
Great, works like a charm; thanks a lot!
Hello there.
I'm using a fujitsu siemens pocket loox N520 too. I tried the link
http://forum.xda-developers.com/showthread.php?t=388364 as on this thread recommended, but for whatever reason couldn't unzip the file. Guys any suggestions what to do? Thanks in advance.
fujiman2004 said:
Hello there.
I'm using a fujitsu siemens pocket loox N520 too. I tried the link
http://forum.xda-developers.com/showthread.php?t=388364 as on this thread recommended, but for whatever reason couldn't unzip the file. Guys any suggestions what to do? Thanks in advance.
Click to expand...
Click to collapse
hello
Files like xxx.cab you must instal on your device, you nothing unzip just instal on your device ....
i have download this think, and i'll try tomorrow....
gonna buy those SDHC first...
thx 4 sharing....
nice! time to do some upgrading. thank you for this.
kasovnik said:
Help.
I get the message:
The installation on the SDHC driver was unseccessfull!
I tried to install it from the phone memory and from the memory card, still no result.
What's going wrong?
Click to expand...
Click to collapse
Have u tried not to insert a card ?
just start the smartphone without it. install driver from phone memory.// it gonna helps u
a !! an' don't forget 'bout unlockin' (if it's still not)
Hi Mr.juanfervs, I hope u can help me out; recently I tried to upgrade my i600 WM5 to WM6. and successfully downloaded the upgradation by WCED downloader; after the phone tried to restart & stuck up at 'Ultra Messagling'. from here the usb connection failed the PC to recognize the phone. Can you tell me 1. how can make connection between my phone and the PC; 2. how can I restart my phone and 3. how can I revive my phone. Thanks
Hello,
I have a HTC touch pro 2 (tmobile) and the Micro SD disappears from file explorer every time the device powers off (standby) and I turn it on again. This is solved by reinserting the SD card (Sandisk SD HC 8 GB Class 6) or soft resetting but these are temporary solutions. I have searched allll of the internets and have found no working solution. Things tried so far:
change reg values
[HKLM\System\StorageManager]“PNPUnloadDelay“=dword:8196
[HKLM\System\StorageManager]“PNPWaitIODelay“=dword:8196
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class]
“DisablePowerManagement“=dword:00000001
Soft Resetted
Formatted card to FAT 32 (64 kb) still no luck
I am really desperate to solve this issuse because reinserting sd card requires me taking off my case. Please, please please help me. I have tried everything. The SD card works when I plug into PC, just when I put it into my TP2 it plays up If you need any aditional info please dont hesitate
THANKS IN ADVANCE
EDIT: This article exactly details my problem: techbuzz.in/fix-phone-memory-card-it-doesnt-show-up-in-the-mobile.php but none of its solutions works
Why don't try another SD card
ive already tried that!
Hi!
I just got my HTC HD2 and now wanted to install a different OS. After installing MAGLDR (v. 1.13) I tried to copy the OS files to my SD card using the USB mass storage option. But after about 100 mb MAGLDR freezes completely and blocks all data transfers. Only way to get it back working is removing the battery. The SDcard is 8GB big and I'm running Win7 64-Bit on my PC.
Any suggestions how to fix this problem? I don't want to buy a microSD card reader just because of a software problem.
Thanks in advance!
Greez ZeroKey
I have had this problem with both MAGLDR and inside CWM recovery on windows xp x32, windows 7 x64, and linux ubuntu x64.. I don't think there is a way around it..
This is due to a bad/incompatibble sd card. I had a 2GB card that worked just fine but could not use as a mass storage in MAGLDR 1.13. The card would work just fine anywhere else. I replaced it with a 16GB class 6 sd and all went fine.
ZeroKey92 said:
Hi!
I just got my HTC HD2 and now wanted to install a different OS. After installing MAGLDR (v. 1.13) I tried to copy the OS files to my SD card using the USB mass storage option. But after about 100 mb MAGLDR freezes completely and blocks all data transfers. Only way to get it back working is removing the battery. The SDcard is 8GB big and I'm running Win7 64-Bit on my PC.
Any suggestions how to fix this problem? I don't want to buy a microSD card reader just because of a software problem.
Thanks in advance!
Greez ZeroKey
Click to expand...
Click to collapse
With a big thanks to ClydeB1, here's the solution:
http://forum.xda-developers.com/showthread.php?t=944109
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A