Database Info

Big Storage Problem, mdac Doesn't switch on anymore!

After flashing from sd card with a german big Storage rom and a soft reset, the phone doesn't switch on anymore.
I can't go into the bootload either.
What can i do now to bring back my rom bachup?
thanks!

When you can't go into bootloader you've probably killed it. Pls try once more & connect it with usb or ac to charge.
You need to be in bootloader to rescue it, a shipped-rom works best in this situation.
Still got warrenty, use it claiming it's cause by regular TMO update.
Cheers, M

the phone, doesn't react at all.. so if i can't get into the bootload, i will have to change it?
Is there any other possibility to reactivate it, or to boot the broken rom?

The bootloader is the most important part of the rom, so when even that's part is corrupt I see no repair possibilities other than chip swapping.
You'll have to send it back. Try out the warrenty issue, when the rom is this much damaged I can hardly belief that a service engineer can see what caused it.
Hope the best for you, M

You don't know someone in your neighborhood with a magician too? Or Live close to Arnheim. So you can try another battery, it might be empty & not charging.

No, the battary is fine, i've just got a new one on friday form Warrenty-Service, because of a broken speaker, so i'll send it away again..
I've read about some others that had same problems with that rom, and surprisingly there were people, where that rom is working well, i just don't belive that, because i did erverything right and it should've worked...
now i'm worried weather i should try it again with an other rom when i recive a new phone, or leave it as it is! :lol:
P.S: Thank you very much for your help!!!

Is the Bootloader a part of the rom, or is it an independent prog. on the phone?

The bootloader is a special part of the rom. Pls visit the wiki for complete explanation http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
There's a bootloader section & a section about BS from a shipped-rom which is in my opinion the safest way to achieve BIG Storage.
Hope they fix your magician soon.
Cheers, M

Please help!!

i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please

More detail please...

Isaygarcia said:
i konw that this is not a Universal forum but, can anyone help me? i got an error 112 Update Error, and i cant just flash anything, just stucks at 7% help please
Click to expand...
Click to collapse
Are you at your Tri-Color Screen? If so...tell me what the screen says...also what device do you have a Tilt or a TyTN II

well when i was trying to flash the rom it not recognized it, then i disconected it and then enter in bootloader, and when it was flashing just stucked at 7% and said "ERROR 112 :CE Rom Update Error"
and now i cant flash anything, just stucks at the same 7%

its a Universal i know that it isnt a forum for that device but in the universal one just nobody answers =( and i guess that some people here has 1 uni too

Theres a way to Flash the rom via SD card on the universa?? please help TT-TT

Isaygarcia said:
Theres a way to Flash the rom via SD card on the universa?? please help TT-TT
Click to expand...
Click to collapse
What does your TRI-COLOR Screen say?

it says just usb and v1.0
it tries to flash and then stucks at 7%

new thing, when i try to flash an original rom, it says "error 100: model id error 22-N-50-N-N

please help!!

Can anyone help me please?? =(... i get an error 112, the rom just dont flash, it gets a 7% then the error appears, its an HTC Universal. i tried some things and even no results, theres a way to flash from SD? or it will be the same?? or maybe it got locked or something? or i just bricked it?? it enters to bootloader and it starts to flash and stuck on 7% TT-TT

Did you try a google search? I found this related to error 112...

Thanx, trying possible Fix!!

aahh it doesnt work... please can anyone help more??

tried to install the original stock rom and just wont work.. when the update reaches the CE update just stuck at 7% what can i do???

can i get some help? please =(

i searched on google, and i found that a some peolpe had this problem too, but, the same as me, nobody answers. its time to throw away my universal?

Not to sound mean, but you could try spamming the Universal forums instead of the Kaiser forums. I know there are a lot of people on the Kaiser forums, but we're Kaiser users. Odds are you'll get better information in the correct forums because the people there have the same hardware...just a thought.

close this thread plz

OK,
I have a Universal, and here are some ideas and questions:
1. Give the exact name of the ROM you are trying to use. Do not put "the original one," or "Fred's rom." Put the EXACT NAME of the ROM that you are upgrading to, and a link to it.
2. Stop. Take a breath. Throwing away your Universal will not solve the problem.
3. Give exact step by step description of what happened. Start from, "I was using my Universal with XXXXXXX ROM and the world was fine, and then I downloaded the ROM given in item #1 above. I then did (whatever you did). Continue on. End with "I am now stuch at 7%"
4. I noticed that you are from Mexico. I am from the USA, so some colloquilisms may not translate well. (Plus my Spanish is horrible). Let's just stick to the facts.
To be quite honest, your posts are not helpful, and they sound like a drowning man clutching an anvil (see last Sunday's Dilbert...). It would be more helpful if you could be more forthright and specific as to the issue, and give those wanting to help you as much detail as possible.
I am willing to help, but help me help you.

Have I bricked my Kaiser

Hi,
Was changing the ROM on my Kaiser, using JUMPspl as I had got the white screen using Hardspl. During the upgrade got an error at about 18%, went through the recovery procedure only to get back to the Bootloader screen with the screen saying
SPL-1.93.0000
I think it should say something different here!
At the moment can only get the the tri-colour bootloader screen with usb at the bottom.
Please any help would be much appreaciated.
Thanks

If you are at the tri-color bootloader screen, reflash a ROM.
that's where the process starts at anyhow,the bootscreen.

But doesn't the SPL have to be either Hardspl or jumpSPL.
I have tried to do the rom update again but sticks on 0% and gives error 262

Alemaker said:
If you are at the tri-color bootloader screen, reflash a ROM.
that's where the process starts at anyhow,the bootscreen.
Click to expand...
Click to collapse
Not advisable if he has the default SPL still though which by the number appearing at the tri col screen it appears to be the case.
Try doing a hard reset and see if it boots into the original ROM then at least you will find out if it is bricked or not, however, i'm not sure it will work based on the fact you got part way through in the first place.
Hold down the keys directly next to the Send and End (green and Red) Hold in the stylus and keep them all held untill you get a screen telling you to press the green (send) key.

Tried the hard reset, takes me back into the bootloader. Any other ideas?

Hmm... ok then.... you are pretty much looking at a very expensive paperweight at this moment in time then.
Look at this thread...it "may" (i'm not promising anything but it may point you in the right direction) help you out. Let us know how it goes.
http://forum.xda-developers.com/showthread.php?t=361612&highlight=bricked

cmcmill01 said:
Hi,
Was changing the ROM on my Kaiser, using JUMPspl as I had got the white screen using Hardspl. During the upgrade got an error at about 18%, went through the recovery procedure only to get back to the Bootloader screen with the screen saying
SPL-1.93.0000
I think it should say something different here!
At the moment can only get the the tri-colour bootloader screen with usb at the bottom.
Please any help would be much appreaciated.
Thanks
Click to expand...
Click to collapse
Hate to joint the parade, but the exact same thing happened here - 18% now stuck at 1.93.0000

For anyone else reading this BEFORE flashing a new ROM please read, read and read again EVERYTHING related to flashing on this site, wikis and wherever else you can get info.

Another idea for you. Search around here for how to flash from an SD card that may solve the issue out for you. As previously noted though....READ READ READ and be 110% certain you understand what you are doing before you do anything.

http://forum.xda-developers.com/showthread.php?t=276963&highlight=stuck+bootloader
details some info for a Wizard, should it be the same for a Kaiser?
Will Mtty get me any further?

MTTY will at least give you a USB connection to the device it is worth a shot given your current situation.

There is hope!
I did a clean reboot of my PC and disabled my antivirus (avast) and was able to sucessfully reflash the new 1.62 rom (released from ATT site today).

Thanks will try the new 1.62 rom.
What commands can you use with MTTY?

tried the At&t rom gives me an error on the vendor id. Will try a HTC rom

I have tried multiple roms and they all give me the same error Error 294:Invalid Vender ID
Any ideas
Am starting to get worried because if the misses finds out that I have bricked the new phone, I am up to my neck i it.

If you are stuck in boot loader & would like some help via MSN Messenger, please PM me or look for me on MSM messenger at [email protected]. I will be available to help later this evening or tomorrow morning.
I have most of the files to fix these issues & can use MSN fileshare folders to help you.
Good chance that you can be up again in a matter of minutes

cmcmill01 said:
I have tried multiple roms and they all give me the same error Error 294:Invalid Vender ID
Any ideas
Am starting to get worried because if the misses finds out that I have bricked the new phone, I am up to my neck i it.
Click to expand...
Click to collapse
Invalid Vendor I.D. is cuz it's locked.
Had the exact issue myself and found a ATT ROM that will boot. It saved me bigtime, so I saved it. It's in one of the posts on one of the threads but I have the actual ROM, it'll overide that lock.- PM me if ya need it.

Got the same solution, Holy S**t about to have a heart attack. Tried nearly ever ROM out there, it was the Asia one that got me going.
Lesson learned: make sure you Hardspl after jumpspl.
Thanks for all the help folks

Glad ya got it fixed. One quick question?
Is your original ROM ATT or HTC ?

It is a HTC ROM. Done My Hardspl and got Sleuth v3.0 on it already
Happy days

kaiser white screen_not possible upload radio, ROM or anything else, pls help !!!!

Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance

kissabout2002 said:
Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance
Click to expand...
Click to collapse
please post this in the appropriate thread...like for example the HARDSPL thread. For example the one dealing with the white screen issue specifically. Try searching "hard spl white screen"

kissabout2002 said:
Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance
Click to expand...
Click to collapse
for starters wrong thread .. secondly problem could have been completely avoided if you did the basic reading i.e. first hardspl .. if white screen than follow thread on white screen fix .. got hardspl? flash rom ... simple as that.
now u need help .. and instead of posting under the right thread you create a new redundant thread asking about a problem that quite a few people run into. in order for us to help we need info from your phone .. what does bootloader say? can u boot to operating system?

thesire said:
for starters wrong thread .. secondly problem could have been completely avoided if you did the basic reading i.e. first hardspl .. if white screen than follow thread on white screen fix .. got hardspl? flash rom ... simple as that.
now u need help .. and instead of posting under the right thread you create a new redundant thread asking about a problem that quite a few people run into. in order for us to help we need info from your phone .. what does bootloader say? can u boot to operating system?
Click to expand...
Click to collapse
sorry but I did not where put my problem, I did try to resolve it reading lots of other thread and I try lots of solution but nothing, anyway thanks for your help and time, so the problem with my kaiser is that it power up with white screen and nothing else happened then I have to take off the battery and put in again then pressing power button and camera I got the tricolor screen
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k3.jpg
connect to the computer running XP I try to update ROM or RADIO or SPL but the result is all the same this:
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k2.jpg
with the result on the computer:
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k1.jpg
a this point I have to take away the battery,
let me know if you need more information
thanks
Acky

You don't have hardspl installed. Install the hardspl, white screen fixed.
Follow the directions exactly. This is your freebie
http://forum.xda-developers.com/showthread.php?t=354061

P1Tater said:
You don't have hardspl installed. Install the hardspl, white screen fixed.
Follow the directions exactly. This is your freebie
http://forum.xda-developers.com/showthread.php?t=354061
Click to expand...
Click to collapse
thanks mate but how can I copy JumpSPL1.56-KAIS.exe to the device and run it if the device does not work ?
regards
Acky

well if nobody else is able to help I have to throw away this stupid expensive phone :-(

kissabout2002 said:
well if nobody else is able to help I have to throw away this stupid expensive phone :-(
Click to expand...
Click to collapse
Before you get too upset, have you tried posting in the correct thread? Just like was suggested over a week ago? Have you tried a hard reset? I don't see that anywhere in your steps you took. What about flashing a stock rom?

skatdawg said:
Before you get too upset, have you tried posting in the correct thread? Just like was suggested over a week ago? Have you tried a hard reset? I don't see that anywhere in your steps you took. What about flashing a stock rom?
Click to expand...
Click to collapse
thanks for help , I tried hard reset but then the same problem, about flash STOCK ROM how can I do that?
regards
Acky

kissabout2002 said:
thanks for help , I tried hard reset but then the same problem, about flash STOCK ROM how can I do that?
regards
Acky
Click to expand...
Click to collapse
You download the stock kaiser rom (searching is fun!), then you unrar, and click on the phone like button and follow the instructions. Then again, theres a thread on returning your phone to its original config. More searching fun!

kissabout2002 said:
well if nobody else is able to help I have to throw away this stupid expensive phone :-(
Click to expand...
Click to collapse
Don't trash, I will be happy to pay for shipping charges on it to ship it here

I cannot find UK VODAFONE STOCK ROM original 6.0, somebody knows where is possible found it?
thankssssss

am i screwed?

if i flashed a gsm radio on a cdma? jus curious cuz i did that

Get your operators ship rom, then flash it via SD card. Reflash HardSPL and then flash a CDMA rom.

Oh dear. I could be wrong, but I seem to remember when someone has done that before, the phone was bricked (i.e. flashing the wrong radio, not just the wrong ROM). I do hope I'm wrong.

steviewevie said:
Oh dear. I could be wrong, but I seem to remember when someone has done that before, the phone was bricked (i.e. flashing the wrong radio, not just the wrong ROM). I do hope I'm wrong.
Click to expand...
Click to collapse
****, I read that too fast and didn't read radio. Yeah, bricked. /end

Hi didn't say he did it, the title "Am i screwed?" "if i flashed a gsm radio on a cdma? jus curious cuz i did that "
-----------------------------------------then he put
I think he needs to repost in ENGLISH please. I cannot undrstand if you flashed it or not, therfore meaning i cannot help
Badwolve1

Badwolve1 said:
Hi didn't say he did it, the title "Am i screwed?" "if i flashed a gsm radio on a cdma? jus curious cuz i did that "
-----------------------------------------then he put
I think he needs to repost in ENGLISH please. I cannot undrstand if you flashed it or not, therfore meaning i cannot help
Badwolve1
Click to expand...
Click to collapse
He said "cuz I did that", i.e. he *did* flash a GSM radio onto a CDMA device.

Suppose, but I would of expected a n00b to of posted something more like
"HELP!!!!
I flashed a sprint radio to my Tmo TP2 and now it wont turn on
PLZ PLZ PLZ HLP ME!"
he seemed rather calm

thanx for posting, well i thought i broke my phone a couple of days ago prior to this bcuz my phone turned off out of nowhere and wouldn't come back on even after being charged for an hr. then it turned on a couple hrs later when trying again. (dont ask me how bcuz Ive never had this problem before) and yes i did flash the wrong radio so im done for right? the reason why im being calm is cuz i thought i was gonna have to replace my phone in the first place. i was hopefully wishing on the inside for a miracle

nom303 said:
thanx for posting, well i thought i broke my phone a couple of days ago prior to this bcuz my phone turned off out of nowhere and wouldn't come back on even after being charged for an hr. then it turned on a couple hrs later when trying again. (dont ask me how bcuz Ive never had this problem before) and yes i did flash the wrong radio so im done for right? the reason why im being calm is cuz i thought i was gonna have to replace my phone in the first place. i was hopefully wishing on the inside for a miracle
Click to expand...
Click to collapse
Well, unless someone comes forward and says otherwise, I'm sorry to say yes, I think you're done. In the past one or two people have posted up a similar scenario and I don't recall them posting to say they fixed it.
It might cost you less than replacing your phone if you pay for your phone to be repaired.

Well possibly not. IF you can still get into bootloader (hold the volume down button when powering on or if device is already on hold down volume down and softreset) first LOOK AT THIS TASK 29 POST HERE BUT DONT DO ANYTHING YET!:
http://forum.xda-developers.com/showthread.php?t=649191
Make sure to download the file provided, extract it to wherever.
Now goto this post here:
http://forum.ppcgeeks.com/showthread.php?t=90342
and download the correct radio for your provider.
Replace the NBH file from the TASK 29 threads package you extracted with the one from your provider.
Run the task29 as instructed.
Once its done it wont boot into a rom you need to go back into bootloader like I told you how before (Volume down and reset) now find your providers stock rom from here:
http://forum.ppcgeeks.com/showthread.php?t=91940
and flash that rom to your phone. Hopefully this will resolve your issue, best of luck to ya mate.
To anyone ready to post disagreeing: Please dont post up saying about task29 and saying it wont work and stuff, I have fixed two worldphone this way because the owners did exactly what he did, in the way I described here.

thanx aestivalisakito im willing to try what your taking about. have a couple of questions tho. its not that im making it go into bootloader. when i hit power it goes str8 to it. could that be a problem for this fix?
my screen sticks at the multi colored screen with writting in the background saying" code error please try again".and i noticed that, one time while powering on b4 getting stuck. it, for a split sec. try to go to the grey screen to flash and says "loading No image found" then back to multi colored screen. does this help any?
also can i use task29 thru sd card?
thanx for your help

nom303 said:
thanx aestivalisakito im willing to try what your taking about. have a couple of questions tho. its not that im making it go into bootloader. when i hit power it goes str8 to it. could that be a problem for this fix?
my screen sticks at the multi colored screen with writting in the background saying" code error please try again".and i noticed that, one time while powering on b4 getting stuck. it, for a split sec. try to go to the grey screen to flash and says "loading No image found" then back to multi colored screen. does this help any?
also can i use task29 thru sd card?
thanx for your help
Click to expand...
Click to collapse
Ahh it appears you weren't that clear. If you get into the multi-coloured screen, you are at bootloader. Download a rom from http://wiki.xda-developers.com/index.php?pagename=HTC_Rhodium/Shipped_Roms to get your original shipping rom. Once you have done this, put the nbh on the sdcard named as rhodimg.nbh. Reboot back into bootloader mode. This should then get you able to flash the device with all the proper stuff.
Make sure to get the one for YOUR original provider.

thanx i got it fixed. someone helped me on another forum with the same solution and it worked thanx for ur reply

nom303 said:
thanx i got it fixed. someone helped me on another forum with the same solution and it worked thanx for ur reply
Click to expand...
Click to collapse
Awesome. Glad everyone helped you get your phone back. Just be more careful next time. Cheers!

so all you did was SD card flash an original ROM from your carrier? just asking for future reference.