Related
Anybody know some application that can configure proxy (use ou not) in each connection?
I use proxy for GSM data connection to work remotly (work network), but when connect by WiFi or GPRS I don't use proxy and have to enter configuration connections to disable...
Can I assign proxy settings to each connection?
Thanks
Hi there!
Maybe I'm just too stupid, but I've benn trying for weeks now to setup the network parameters for my University's Campus network and failed miserably, so could someone please explain to me how this darn "Internet Connection Manager" works?
What I need in brief:
How can I setup a proxy to use with and only with
- HTTP(S) and FTP(S)
for a WiFi-Network that
- is NOT encrypted
- does NOT require dialing a number / accessing a modem
- does NOT use a VPN
??
Whenever I try this it always results in the connection dying completely.
In other words: When I select my standard UMTS-uplink as "default connection for programs connecting automatically" and then manually establish a WiFi-connection I can reach all computers available on the campus network get ping responses and everything, but I cannot use a proxy, hence not load off-campus pages.
When I define a new connection and enter my settings (just WiFi-name and the proxy details) I can still establish a WiFi-connection, but get a ping timeout even on the access point and the intranet servers usually available through the WiFi. No SSH login, no intranet, nothing (but I do get an IP assigned & stuff)
Here's what I would like to do in theory:
=> Manually connect to a WiFi-Network called "tuwlan".
. -open network
. -no encryption
. -IP, netmask, gateway, nameserver etc provided automatically by DHCP
=> Establish a SSH2 (SecureShell) connection to our on-campus proxy server and tunnel some ports to get through the Subnets (extremely restrictive) firewall.
. -SSH including port forwarding done with PockeTTY, works like a charm
=> Use Opera Mobile to surf web pages and FTP Sites through the proxy "localhost:40081" (which is forwarded to our campus proxy server through SSH2).
=> The Proxy only knows HTTP(S) and FTP(S), so all other programs (ICQ, Skype etc) are not to use it!
This setup used to work great with older Opera versions, but they removed the proxy setting dialog in favor of directly using the ICM settings.
So now I'm stuck with Microsofts Internet Connection Manager
Can anyone please help me to get this working?
Hello,
i know this isnt a Blackberry Forum, but maybe anyone can help.
Anyway I'm in the act to configure a Blackberry Bold 9000 for our Company. I am testing the device in the first step without the BIS or BES funktions. I try to configure the VPN for a Cisco Concentrator 3000 using the GPRS / UMTS Connections to connect to Outlook WebAccess or Outlook mobile Access only with the browser.
My Steps:
- Configure at the TCP Settings our Provider APN with Username and Passwort.
- Creating a VPN Profil for the CISCO Concentrator with our Settings IKE / IPSEC / Groupname and Passwort / VPN User etc.
- Then i saved it and try to connect but nothing happend. Realy nothing!
- Then i setting up a Wifi Network for a test and connect, it works.
No my questions:
Is it generell possible to connect over GPRS / EDGE or UMTS to a VPN to use Outlook WebAccess or Outlook mobile Access with the browser.
When its possible, How can I configure, that the Internet Connection and the vpn use my special APN ?
I hope anyone can help me.
Thank a lot.
Before i start i want to let people know YES I DO HAVE A WIRELESS ROUTER!! So please do not respond telling me to just go buy a router.
REQUEST - Reverse wired tethering. I.E. Sharing PC's iNet connection with your phone via USB.
REASON - My university's wireless is locked down and does not allow mobile phones, pda's to connect up to our wireless without submitting MAC for approval. Looking to sync certain apps without using my data connection.
I dont know if anyone has played around with trying to get this working or not. I know its a small market of people who may be interested in this, but for certain places (CANADA) where data charges are WAY to expensive this could be handy for students at UNI where wireless is not an option.
get a second wifi adapter on your laptop, and share your uni wireless network connection with the second wifi adapter. Use a hidden SSID, then no one will know what is going on
This was asked a couple of times before here and I remember people saying you couldn't reverse the tethering.You could try though.
alexperkins said:
get a second wifi adapter on your laptop, and share your uni wireless network connection with the second wifi adapter. Use a hidden SSID, then no one will know what is going on
Click to expand...
Click to collapse
Thats a good idea xD
Hey guys,
I have been trying to find a way to do this for a long time.
The best solution i have found (actually the only solution) is Connectify. The only downside is you must have Win7.
What it does is turns your wifi adapter into a HotSpot, even if you are using wifi to get the net in the first place. Its a great tool and should be what your after.
http://www.connectify.me/
memphisraynz said:
Hey guys,
I have been trying to find a way to do this for a long time.
The best solution i have found (actually the only solution) is Connectify. The only downside is you must have Win7.
What it does is turns your wifi adapter into a HotSpot, even if you are using wifi to get the net in the first place. Its a great tool and should be what your after.
http://www.connectify.me/
Click to expand...
Click to collapse
thank you so much for this
Your best solution is the WiFi adapter. You could most likely get away with a SOCKS proxy over USB, possibly using adb, but it would be complicated, unstable, and messy.
I still don't know you just don't use your wireless router. I assume they have wired. Clone your PC's mac address and hook it up. Universities are retarded with that crap. They have the worst networks and security.
If no wired, then what podunk place is it? haha
Even if they had only wireless , you could set up a wlan client and repeat it. DDWRT, etc, ftw.
Just get backtrack for your laptop and spoof your mac to all 0 then grab connect to the network at your school the spoofed mac will allow you to browse so long as no other encyption is on the network such as WEP or WPA.
then you can try to flood all the ports on the network so no one else can connect then spoof your phones mac by conneecting to your laptop through wireless as an adhoc connection and while staying connected through adhoc load a second server through the same wireless network card and you can connect to the achools network again. and walla...
death1246 said:
Just get backtrack for your laptop and spoof your mac to all 0 then grab connect to the network at your school the spoofed mac will allow you to browse so long as no other encyption is on the network such as WEP or WPA.
then you can try to flood all the ports on the network so no one else can connect then spoof your phones mac by conneecting to your laptop through wireless as an adhoc connection and while staying connected through adhoc load a second server through the same wireless network card and you can connect to the achools network again. and walla...
Click to expand...
Click to collapse
so simple, i dunno why i didnt think of that. thanks! lol
Well its quit simple once you learn your way around linux...
If you have any experience with *nix, you may want to look at Cyanogen's original usb tether shell script:
http://github.com/cyanogen/android_vendor_cyanogen/blob/master/bin/usb-tether
Basically you could use the internet connection sharing function that comes with all popular OSes and access your uni's network on your phone. You must have Cyanogen mod or another mod using his kernel. Not yet working on OSX for some reason. Tested under Windows 7.
First you'll need to figure out what IP address range your computer's DHCP server is using. This is normally fixed for each OS. For Windows 7, it's always 192.168.137.0/24.
For OSX or Linux, you can setup connection sharing (for some other connection because we don't have the USB interface yet) and ifconfig.
Second is to enable the USB connection on the phone's side. Type the following command in any console program, like Connectbot. (You must use a console program as opposed to adb because you will lose USB debugging once the USB network interface is enabled.)
Code:
su
cd /sys/devices/virtual/net/usb0
ifconfig usb0 192.168.137.200 mask 255.255.255.0
echo 1 > enable
The first line makes you the superuser. (Skip if the command prompt is #)
The second line land you in usb0's directory under sys. We'll need to type the disable command later, so it's easier if we're here.
The third line brings up the virtual usb network interface and sets its IP address.
The IP address should be in the same network (i.e. IP address range) you obtained in step 1. Say if the original is 192.168.137.1 in a /24, you can use 192.168.137.2 through 192.168.137.254
This actually enables the usb interface.
You will now see a new network adapter is recognized by your computer. Set up connection sharing to share your internet TO that adapter.
Make sure you have connection by pinging your computer from your phone.
For example:
ping 192.168.137.1
Now you'll have to change the routes so traffic go through the USB cable instead of the mobile network.(# is the command prompt, do not enter)
# busybox route
check the line starting with "default". Write down the ip address after it; call it IP1.
# getprop net.dns1
Call the IP returned IP2.
Code:
busybox route del default gw IP1
busybox route add -host IP2 rmnet0
busybox route add default gw 192.168.137.1
The first line deletes the old default route via the mobile network.
The second line adds an "exception" for your carrier's DNS server.
The third line adds the new route via USB. You should replace the address at the end with the IP address from the first step.
Your network should be working now. Test by visiting some website that is only available on campus or by traceroute.
You must make sure the mobile network is always connected though. This is because domain names are still resolved by your mobile carrier. If you ever lose your mobile connection, the routing table will be changed as well.
To disconnect:
Make sure you're still in /sys/devices/virtual/net/usb0.(Use pwd if unsure.)
Code:
netcfg usb0 down
echo 0 > enable
The usb interface will disappear on your computer.
Now switch the phone to airplane mode and back to re-enable mobile network.
The disconnect step should always restore your phone's state.
// This is written at 3am, so use it at your own risk...
help?
look at this
http://superuser.com/questions/91699/spoof-mac-address-from-ip-command
bg
It's really sad that Android can't reverse tether. If you want to use your laptop's AdHoc connection you have to do serious hacking to the tiwlan.ini and the wpa_supplicant.conf. There is no way to connect via bluetooth ar USB.
I'm seriously considering WP7 now for my next OS of choice... A nd for everyone saying "go buy a router" - go buy a router and stick it up your .... nose.
Hi,
I have the same problem. No WiFi in my work and no WiFi in my current home (a Resident Hall). There's no possibility to buy a WiFi router, of course. I tried to hack the system to connect ad-hoc networks but it didn't work.
I have found some interesting resources:
sluniverse.com/php/vb/blogs/psyke+phaeton/1042-making-android-phone-use-your.html
letsgoustc.spaces.live.com/blog/cns!89AD27DFB5E249BA!877.entry
I have a HTC Magic with the ADP-DRC83 hacked ROM with Usb tethering integrated. But usb0 interface in the mobile is configured to provide Internet connection (as gateway) to the PC, not the reverse functionality: connecting the mobile to Internet through the PC. So, all I need is to change the gateway in Android and then configure a NAT-DNS in my linux PC (easy with iptables and dnsmasq). But, I don't know how automatize the process exactly.
digitaljeff said:
but for certain places (CANADA) where data charges are WAY to expensive this could be handy for students at UNI where wireless is not an option.
Click to expand...
Click to collapse
Wind will be launching in vancouver soon.
$35 unlimited data.
Silly ragin' cajun.
Ok, now it works. Here it's my procedure for a HTC Magic (Sapphire) without any APN previously configured from Telecom provider and ROM CSDIv4.
In the mobile by using Better Terminal:
Code:
su
cd /sys/devices/virtual/net/usb0
echo 1 > enable
ifconfig usb0 192.168.2.2 mask 255.255.255.0
busybox route add default gw 192.168.2.1
setprop net.dns1 8.8.8.8
In the linux computer:
Code:
sudo sysctl -w net.ipv4.ip_forward=1
sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
sudo iptables -A FORWARD -i usb0 -j ACCEPT
sudo ifconfig usb0 192.168.2.1 netmask 255.255.255.0
Android Market downloads and location service don't work but I think is possible if you switch on the WiFi.
Update: Syncronization, Android Market downloads and location service don't work even the WiFi antenna is switched on. I have added the iptables commands also.
Well gosh, reverse wireless tethering is so much simpler
There are another similar thread: http://forum.xda-developers.com/showthread.php?t=522498
The purpose of this post is to explain how to tether with openvpn, which will hopefully avoid ATT's all seeing eyes, as well as prevent any detection during tethering.
All ATT will ever see is encrypted traffic between a connection that is initiated from my phone and ends at my vpn server. So the only way they would be able to determine if you are tethering, is if they are spying on you ala CIQ directly on your device, or your device phones home and tattles on you. That would open up a different can of worms and a **** storm would ensue.
This method requires a number of things.
* Openvpn server (preferably running on a static address, but will work with dynamic DNS services) with a reliable connection. I use a VPS server for $25 a month, but it is fast and reliable.
* Openvpn on your phone (any will work as long as it has the tun driver or tun built into the kernel(
* Some sort of gateway (your openvpn server can be running on it as well, or a seperate host), I use Freebsd/Openbsd. For linux, your on your own to figure out NAT and gateway functions.
Really, that is about it.
My Openvpn server config, you can set it up any way you like, but certain statements are required, specifically those in the hashed out box if you want your subnets to talk to each other, and route the traffic
Code:
port ****
proto tcp
dev tun
ca /usr/local/etc/openvpn/keys/ca.crt
cert /usr/local/etc/openvpn/keys/vps.server.crt
key /usr/local/etc/openvpn/keys/vps.server.key
dh /usr/local/etc/openvpn/keys/dh2048.pem
server 192.168.150.0 255.255.255.0
ifconfig-pool-persist ipp.txt
mode server
client-to-client
client-config-dir ccd
###############################################
# my phone and home subnets, can be any RFC1918 address space
# Advertise and note your home subnets in this section, unless you
# do not want the various subnets to talk to each other, then you
# can also remove the client-to-client statements
###############################################
push "route 192.168.15.0 255.255.255.0"
push "route 192.168.43.0 255.255.255.0"
route 192.168.15.0 255.255.255.0
route 192.168.43.0 255.255.255.0
###############################################
keepalive 10 120
comp-lzo
persist-key
persist-tun
status /var/log/openvpn/openvpn-status.log
log /var/log/openvpn/openvpn.log
log-append /var/log/openvpn/openvpn.log
verb 4
My client config on my phone (change the remote statement to match your openvpn server host and port)
Code:
client
proto tcp
dev tun
remote vpn.example.com 1234
nobind
persist-key
persist-tun
ca ca.crt
cert client.crt
key client.key
comp-lzo
/usr/local/etc/openvpn/ccd is where I have my client specific configs (match the location to that identified in the server.conf file for your vpn server). I also use certificates unique to each host that connects to my vpn, the names of the files in the "ccd" directory must match the name you gave the device when you created your certificates. I use easy-ssl to manage my certs.
for my phone, which I named "galaxy_s" I have the following (note the DNS option is optional, I was having problems with it so I just hardcoded 8.8.8.8, googles dns server into my network settings on my laptop)
/usr/local/etc/openvpn/ccd/galaxy_s
The iroute statement just tells the openvpn server what subnets you have behind your device, in this case the phone. I am guessing all of the android phones use 192.168.43.x as the NAT'd subnet, otherwise change it to whatever your phone is assigning.
Code:
push "redirect-gateway"
push "dhcp-option DNS 192.168.15.1"
iroute 192.168.43.0 255.255.255.0
The rest of the configurations are related to your primary gateway, which in my case also runs the openvpn server. I am using freebsd and pf, the configs needed for that are essentially natting statements, and firewall rules.
for pf, the following rules are what I use
I also trust all the traffic on my tun0 device, so I told pf to ignore it and pass all traffic
Code:
nat on $int from 192.168.150.0/24 to any -> $int/32
nat on $int from 192.168.43.0/24 to any -> $int/32
set skip on tun0
Hopefully this is useful to other folks, if not, let it be buried
THanks for an EXCELLENT guide!
Quick question. When I use this server conf file, my ssh on my local network hangs up and goes down.
In other words:
I am running openvpn on a home linux server. It is connected through a home router to the internet and has a network set up at 192.168.1.0.
Router is 192.168.1.1,
vpn server is on 192.168.1.51.
If I start openvpn, I cannot ssh from a local network (192.168.1.81) laptop. If I turn off openvpn I can. I changed your 192.168.15.0 addresses in server conf file to 192.168.1.0. I have a feeling it has to do with that.
Well, yes, you will need to modify the configs to suit your own address scheme. As for why you cannot ssh, I am not sure, is that .81 device on the same network as the openvpn server, or are you coming from a different network.
My setup has the gateway the same as the openvpn server simply due to the fact that I am using a Virtual Private Server (VPS) and I only have that as the 1 external static system.
I would check the route statements, I'm not sure, but you might have a routing loop that would be causing the problem, can you traceroute or ping, or use any other protocol/application to see if you can connect). If you set the default gateway of the openvpn server as the .1 address, and then you are trying to connect to another internal address, the .81, when you ssh from whatever device is connected to the openvpn server, it may attempt to connect to the gateway at .1 and then return back into your network to .81.
I could be wrong, it is hard to tell when you are not sitting at the actual systems.
Got it to work! Here's some tips for others
Thanks again for your help jvanbrecht. Last night I was able to sit down, get a better understanding of how it worked via openvpn's HOWTO, and get it running.
I did need to make a few mods for it to work in my configuration (as is expected since very few network configs are the same).
My configuration:
Single home network, say on 192.168.15.0.
Single router, at 192.168.15.1.
Home server hosting VPN on 192.168.15.51. It is running Ubuntu Maverick.
Skyrocket on subnet 192.168.43.0
My modifications:
Since I don't need direct access between VPN clients and my home subnetwork, in the server config I commented out:
Code:
#push "route 192.168.1.0 255.255.255.0"
#route 192.168.1.0 255.255.255.0
It was giving me some problems SSHing into my home server from a local network machine so this was the quick fix.
Initially it wasn't routing ALL traffic, just that directed from VPN client to the VPN server. So I added this to the server conf:
Code:
push "redirect-gateway def1"
push "dhcp-option DNS 192.168.150.1"
In my home (tomato) router, I just port forwarded any TCP traffic on 1194 to the home server (192.168.15.51)
I think openvpn does this already. But just in case, I added an iptable nat entry to forward packet from VPN network to eth0 (my NIC). As root:
Code:
echo 1 > /proc/sys/net/ipv4/ip_forward
And I added the following entry to /etc/rc.local so it persists on restart.
Code:
iptables -t nat -A POSTROUTING -s 192.168.150.0/24 -o eth0 -j MASQUERADE
Some debugging tips for others
Simplest way to verify HTTP traffic is being forwarded is, after connecting to vpn from phone, go to www.whatismyip.com. Make sure it matches your phone.
If you are having trouble connecting to the VPN, watch the openvpn log for errors. "tail -f /var/log/openvpn/openvpn.conf"
After connecting, make sure you can ping from your home server to the phone.
From Server: "ping 192.168.150.10"
From Phone: Open Terminal Emulator and type "ping 192.168.150.1"
You can also validate the traffic is forwarding through VPN by using traceroute. You can test both forwarding and DNS
From Phone: Open Terminal Emulator, type
Code:
su
For no-DNS test first:
Code:
traceroute 74.125.115.104
For DNS test:
Code:
traceroute www.google.com
For each, do your tests on the cell network (NOT home wifi) and verify that the route passes through your vpn server and doesn't bypass it completely.
Lastly to make sure traffic is being piped, you can monitor VPN traffic from your openvpn server by typing:
Code:
tcpdump -i tun0
jvanbrecht:
Do you have any recommendations about dropped connections? I noticed while testing that sometimes my openvpn connection would drop and my phone browsing would immediately default to the direct default cell provider connection.
Of course if tethering, this could be very bad.
Any tips on ensuring that if VPN is enabled, but no connection, that it won't ever try and route around it?
would using any vpn do the same thing? or something making this special ? any one tested this ?
It's been a few weeks since I tried the openvpn app. Back then everything seemed to be working well. But I tried again today and am having problems.
- I can access everything fine via vpn if my phone is connected to my local wifi where the vpn server resides.
- I can access IP addresses (e.g. the ip address of google.com) if connected to vpn via AT&T's 3G network
- I CANNOT access websites by their name (e.g. www.google.com) anymore.
It seems the DNS forwarding over VNC is messed up. Any tips on what the problem could be?
I still have the same settings as above, e.g. push "dhcp-option DNS 192.168.150.1"
Is it possible I need to do any additional configuration on my phone?
Is it possible to replace my router DNS address with a public one like google's "8.8.8.8" or "4.2.2.2"?
Any tips greatly appreciated!
Deleted. Please ignore. Still having issues.
So I had the opportunity to play around with my config (listed above) a bit more this evening. I was at a location where I had good external WiFi (Panera) along with 3G.
If I connect from my phone to my home VPN server over EXTERNAL WIFI (Panera), I have no problems with VPN. everything works flawlessly.
If I connect from my phone to my home VPN server over AT&T 3G network, it fails. Essentially it can't resolve any DNS queries. I can type in a website's IP address and surf that way, but I can't say type in "www.cnn.com" and get a page to load.
For the latter, when I watch the web queries using "tcpdump -i tun0", I see the requests go out from my phone to the websites, but they don't come back. For example, I see:
"192.168.150.10 > a.b.c.d (www.cnn.com)",
but I don't see:
"a.b.c.d (www.cnn.com) > 192.168.150.10"
Is it possible that AT&T is somehow blocking VPN via DNS? At first I thought my openvpn dns settings were messed up ... but it works across external wifi no problem.
---------- Post added at 01:24 AM ---------- Previous post was at 01:07 AM ----------
For those that are interested in the future, I think I narrowed down the issue:
It seems VPN connectivity is dependent on the AT&T Access Point Network (APN)
By default for my Skyrocket I was on the AT&T PTA APN wit settings:
Code:
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS Port: 80
...
I then switched to what is called the "AT&T Expanded" APN with settings:
Code:
APN: wap.cingular
User Name: [email protected]
(rest of settings somewhere here on xda ...)
... and that one worked perfectly.
I switched back and forth a few tiimes to confirm. It seems on pta, I can't resolve DNS over VPN. For the wap.cingular, I have no problems.
Anyone else can confirm this is most likely the issue I am seeing and that it can possibly make sense?