Database Info

weird text message. helppp

i just bought my tilt, just flashed to dutty v3 room and now i get a weird text every 4 mins. the number is 111145643 and it says wvi1 1.1 1111. is there anyway i can stop that text?
thanks!

Hmm I think you should call your carrier. Unless your phone is somehow sending itself a message, the kaiser probably isn't the culprit.

did you have express mail setup? if so you have to reinstall it on the phone then log onto the express mail server and delete the connection that you made for push e-mail or turn off push, then uninstall express mail on the phone and reset. you should be OK

^^I stand corrected!

I think that is for the IM+ program that ATT provides on their roms for im. The company is called wireless village i believe. I was bugged by it for a while, well the full hour I had my device before I flashed schaps!
I use Palringo until trillian gets a clue about wireless devices. It can sync with AIM, Yahoo, MSN, Gtalk, and others.
BTW, It uses data instead of sms to send messages like the IM+ does.

i had the same question but alltheway awnsered it for me already... its kind of a side effect of flashing sometimes. it will go away on its own. i think i got it like 8 times and havent had it since.

gimini said:
i had the same question but alltheway awnsered it for me already... its kind of a side effect of flashing sometimes. it will go away on its own. i think i got it like 8 times and havent had it since.
Click to expand...
Click to collapse
its not necessarily a side affect of flashing, it can go away if you reinstall the app that was on the old rom that is causing it... its something that was installed on your previous rom that used silent sms to alert the program to perform a specific function. LIke PTT, expressmail, or the cing/att IM client (to tired to remember the name)... When these programs are running your phone will recieve a ghost message that is only read by the app to wake it up. Alot of these problems were seen in the hermes thread and PTT.

Nope....That is what you get when someone tries to PTT you. Without PTT you get an SMS message. The way PTT works is basically Voice MMS messaging with a trigger to open & close the voice connection (PTT Button) Those digits you see are altered SMS addresses, they are altered so that PTT can recognize them & shift it from SMS to PTT.
Agin, whenever you kill PTT, you lose the ability to decipher the modified address & hence, it's received as a MMS instead. The reason you keep getting it is because the request that was sent retries a certain number of times before failing.

why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE

Martinhdk said:
why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE
Click to expand...
Click to collapse
Well, that would make Dutty's never ending post even longer. We should save that post for other problems directly regarding the rom, and comments on new updates.
Beside, I believe the problem has nothing to do with Dutty's V3, it work flawlessly for me.

I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..

Martinhdk said:
I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..
Click to expand...
Click to collapse
Martinhdk said:
why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE
Click to expand...
Click to collapse
Wow man take a breath! Your gonna get an ulcer.

to his defense i havn't seen this question in dutty's thread at all. and i've only seen it once but not onthe kairser forums. so cut him a lil slack. plus we all learn something from it...ptt or express mail can cause this. thats sure something i didnt know. hope all is well now...enjoy your device sir.

This question was answered on the hermes forum. That is how I solved my issue. I still believe it deals with the IM app from att that uses wireless village. Ill try to find some links to help get it solved.

I couldnt find the thread in the hermes section that described the issue. It might be from OZ messanger and not IM+. It is the version that comes preinstalled from the ATT rom. It is designed to use sms to im therefore making ATT more money.
I had the same text messages when I first got the Kaiser and ran the im software. I believe my test message had a different set of numbers at the end.
Here is a link to Wireless Village. They are a group that is promoting interoperability between handsets for a variety of functions (IM included).
http://www.openmobilealliance.org/tech/affiliates/wv/wvindex.html
EDIT:
I found this article from the cingular...er...ATT forums. This is the issue I originally had and the same text from the same number. The issue below is because OZ messenger was closed and not properly exited.
http://forums.cingular.com/cng/board/message?board.id=samsung&message.id=16362
I spent all day yesterday figuring this out. I downloaded and install the .cab file to my storage card and then logged into the IM program (OZ). After signing out, it kept me logged into all 3 services (Yahoo, AIM, and MSN) and then I proceeded to receive 40+ text (SMS) messages b/c it was trying to "reach me". After sitting on the phone for about an hour and half with a great Data Service Tech Rep, we figured it out and now the IM program works just fine.
~
I'm getting the message from 1111470400 and all it says is WVCI 1.1 333.
~
LISTEN IT KEEPS TEXTING ME AND IT WONT STOP.
HERE IS THE NUMBER ITS FROM AND WHAT IT SAYS
1111470600
WVCI 1.1 333
Click to expand...
Click to collapse
From the 8525 forum
http://forums.cingular.com/cng/board/message?board.id=samsung&thread.id=33273&view=by_date_ascending&page=1

Martinhdk said:
I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..
Click to expand...
Click to collapse
You know - Generally I don't get into these types of little spit / spat arguments - but today you have caught me at the perfect time.
Martinhdk - you are the type of person that makes dealing with the public so hard. You complain about things that aren't even worth complaining about. Sure - it was Dutty's ROM, but in essence had absolutely nothing to do with the ROM, it's probably the push to talk causing the issue. (Because I have the same issue) You had to try and prove yourself by spouting off and telling someone how to run things, when really, you were in the wrong.
Sometimes people get anxious and maybe don't do as much searching as they possibly should. Big DEAL - you are in a forum and since forums began it has been a problem. Does this require that you lay into the guy and tell him how stupid his question is? NO, it doesn't. You must be one very unhappy individual who probably lives a very lonely life - do us all a favor, in the future; keep your comments to yourself and let the moderators do their job.
I apologize to XDA - I know this thread / forum is not used for this. I just feel that sometimes these guys who insult someone younger / or maybe just not as experienced have a tendency to scare these guys away and I don't feel that is right.

i had the same exprience , its not the problem with your carrier , its the ATT IM+ app , if you exit the app w/o logging out of messenger app you keep getting this wierd msg , i tried unintsallng the app but no luck , finally i relashed a new rom and the error went away.

SOLUTION
What you do is you sign in to AIM at a desktop computer, the screenname you signed in on your phone. than a message will pop up saying you are signed in at two places and if you reply to that window with "1" it will sign you out at the other location, your phone. that should stop the messages.
the AIM service on your phone used txt msgs and when you close the program without first signing out. it usually causes that problem.

Stealth message?
I've heard of this so called "stealth" text message used by the carriers to send commands to the phone. My next question is - is it possible to send one of these so called "Stealth" messages from a phone to anther phone - with the proper instructions encoded in the text msg to automatically appear either on the users screen or in their inbox? I have heard this is possible but am very interested if someone could provide me a little more insight on it....

It's possible, it's been done. Would you like to know how? How do you want to send the malicious code? BT? WIFI? MMS? Maybe I can get you my bank account number & ssn while I'm at it?
There are other forums for that type of stuff, some proggies to do this are actually security auditing tools. Most all means though require the user to acknowledge receipt of whatever you send & then require them to execute it. However, I sincerely doubt that anyone here is going to give you any means to do something that may harm someone's device. Sure, you just want to play a prank, but how about the guy you then teach it to?

HOW TO: Increase size of caller id picture / photo??

Question is simple:
HOW TO: Increase size of caller id picture / photo?? during incoming/outgoing calls...
but without using any 3rd party software but just by registry or some other manual tweak...

How it's done?? Someone help!
I've used Blue Angel/PDA 2K for 4 years, & there is a great possibility in PDA 2k at increasing/decreasing contact pictures while incoming or outgoing call, besides it has a more hands-on and enhanced software of Photo Contacts than Universals'...
But it can be done in Uni, is'nt it so? BUT HOW?

The simplest way is to install S2U and activate full screen caller,
then use S2V to assign the photos to contacts,
Good luck!

respect the post bro!
thanks for your advice as a senior. its ok.
But it's clearly stated in my 1st post that
1. NO 3rd Party software
2. Only Manual tweak within the registry without installing anything.
Thanks.

There is no way without additional software modifications,
In your second post you mention about Photo Contacts program,you would like to know that it is a 3dy part program too.
The only way to increase (incoming) caller photos without any programs is to alter your Dialpad skin,but it will never be fullscreen anyway and I am not sure if there are such dial pad skins around fully compatible with WM6 and VGA (that's important if you are running on WM6 and above).
It's your choice,
the fast and easy way or..
Good luck!
<<In future PLEASE don't post same questions in multiple threads sections>>

first i wud like to say that i used "Photo Contacts" as a General term.
If any 3rd company has made a software over that general term, it's not
supposed to be applied everywhere like you just did. Sorry on your perception.
2ndly Bro, if u don't know the solution there's no need to fight, nor to show your attitude over someone that STOP posting & stop this stop THAT!
Discussion is the only part to success, not by fighting. REMEMBER THAT!
& Calm down, relax, get easy...This is a well balanced discussion, & fight is'nt excepted here but only precise knowledge/data.
Bro, Use a Blue Angel/PDA2k, then ur mind will get a little change,
that if features were more in WM2003, then why NOT in WM6.1 ??

I am flaming no one just,answering by facts,
I've had a Qtek 9090 too and know the program you are talking about
http://www.ixbt.com/pda/t-mobile/mda-compact/mda-compact-screen-photocontacts.png
Trust me,the way you asked to ''increase the size of caller id'' isnt realizable.
No offense,
just use some workarounds and you'll get something better and in fullscreen.
(and in future if you will find a Reg Tweak to make that,fell free to post it)
As for ''STOP posting & stop this stop THAT!'' I remember you to read and follow General XDA-Developers Rules
http://forum.xda-developers.com/showpost.php?p=681487&postcount=1
Nothing personal
Have a good day!

dear dr Fuma, for a while, waiting for some one in unkown times found it in registry,
maybe you can visit here: http://www.pocketx.net/
hope can cheere your day

In Your BlueAngel there was no way to display caller ID photos by OS itself. There was additional software involved (3rd party software). Photo Caller ID was introduced in WM5.
BTW. I had animated gifs those times and i couldn't find any software which can do the same since then...

[Q]WM6.1 - Only one mobile phone number allowed in contacts?

Hello, everyone! I'm new to this great site, and would like to say thank you for so many inspiring posts.
I encountered a big problem --- perhaps it's been discussed before, but I cannot find the answer after trying to search the forum.
I've been a Symbian UIQ users for years. Just 3 weeks ago I purchased my first WM phone HTC Max4G.
For an elderly newby like me, I must confess that using WinMo 6.1 is a frustrating experience. I have lots of questions, but please allow me to bring up the biggest one:
I realized that in one contact only ONE mobile phone number is allowed....?! It's hard to believe! Many people have several mobile numbers (dont' you?) In UIQ you can add as many numbers as you want, and for all types of numbers.
Would you please tell me how to solve this problem?
Or, is there any program to replace the WM6.1 contacts?
(In UIQ3 there's a fantastic useful program called DreamConnect; worth every penny)
...I bought this new phone only for sake of the cool big 3.8" display. Now I feel desperate.
p.s. English is my 4th foreign language. Please don't mind my grammar.

Begovaya said:
Hello, everyone! I'm new to this great site, and would like to say thank you for so many inspiring posts.
I encountered a big problem --- perhaps it's been discussed before, but I cannot find the answer after trying to search the forum.
I've been a Symbian UIQ users for years. Just 3 weeks ago I purchased my first WM phone HTC Max4G.
....
p.s. English is my 4th foreign language. Please don't mind my grammar.
Click to expand...
Click to collapse
first of all luck you ... A htc max4g ... i'm sitting drooling here.
as far as your problem goes i believe the reason for that is because you are saving contact to sim and when a contact is saved to sim card only one number is allowed. Now if you created the contact on device memory you will be able to have mutliple numbers, picture, email address, actual address, etc etc. of that one contact under a contact
Hope this helps out.

It just works a bit differnt in WM.
Just like in Outlook itself, you can add a HOME PHONE#, a BUSINESS PHONE#, a MOBILE PHONE#. This has to do with synchronization.
If you need more than 1 MOBILE PHONE#, simply add the contacts main mobile number under MOBILE and all others under OTHER NUMBER's - you still can pick them when writing SMS or when calling, they are just not labeled MOBILE ... that's it.
I hope that helps?
BTW:
If you have 'lots of questions' and you can't find the answers, please combine as many questions as possible in 1 single post - that helps keeping the forum clean and reduces the amount of threads.

Junner2003 said:
It just works a bit differnt in WM.
Just like in Outlook itself, you can add a HOME PHONE#, a BUSINESS PHONE#, a MOBILE PHONE#. This has to do with synchronization.
If you need more than 1 MOBILE PHONE#, simply add the contacts main mobile number under MOBILE and all others under OTHER NUMBER's - you still can pick them when writing SMS or when calling, they are just not labeled MOBILE ... that's it.
I hope that helps?
BTW:
If you have 'lots of questions' and you can't find the answers, please combine as many questions as possible in 1 single post - that helps keeping the forum clean and reduces the amount of threads.
Click to expand...
Click to collapse
This isn't all completely true.....
If i were to enter a number into work i couldn't choose to send a text message to it from the "contacts" page.

Thank you, thesire, junner & joel,
Indeed I save all my contacts on device memory, not on SIM card.
Yes, after synchronization from my UIQ3 phone to Outlook, all the HOME MOBILE numbers are lost... (cry). I have around 1800 contacts and I don't know what to do now.
Yes, these days I try to manually move some numbers from SE P1i to HTC Max. It is soooooo inconvenient not able to distinguish HOME MOBILE# from OFFICE MOBILE#. (scream)
I have to move some mobile# to other cells as you mentioned, but quantity of those cells is also limited, isn't it?
Some of my contacts have more than 10 mobile# since I include numbers of his, his wife, his driver and his secretaries altogether, for whom I don't want to create separate contacts. Symbian has no problem with this at all. Symbian also allows me to add comment after the telephone numbers.
WHY is Outlook & WinMo so idiotic???
I will post other questions later within this thread, in order to keep this forum clean. Thanks for any help!

Begovaya said:
I will post other questions later within this thread, in order to keep this forum clean. Thanks for any help!
Click to expand...
Click to collapse
You should ask Microsoft . For me the system is good enough, but maybe you are searching for an alternative to Outlook. There are several applications doing just this, maybe you will find a better one. I think the term for such applications is "PIM".

johnpatcher said:
You should ask Microsoft . For me the system is good enough,
Click to expand...
Click to collapse
So you're saying you don't have problems with single mobile number?
johnpatcher said:
but maybe you are searching for an alternative to Outlook. There are several applications doing just this, maybe you will find a better one. I think the term for such applications is "PIM".
Click to expand...
Click to collapse
Yes, I guess that is what I need. Would you please give more clues about the PIM? I googled "PIM Windows Mobile 6", and got many... too many results. Please enlighten me on this. Thanks

you can use bluetooth to send contacts directly from p1i to max i believe, that would be better and faster solution

Inesoft phone
xiux said:
you can use bluetooth to send contacts directly from p1i to max i believe, that would be better and faster solution
Click to expand...
Click to collapse
Thank you. I tried this... it doesn't help.
For example, I have one contact who has about ten numbers, among them 4 mobile phone #. After beaming to Max, only one mobile phone# remians. Obvious the idiotic WinMo contacts program decides that it doesn't need the other 3 mobile#.
D--n!!
Has anyone used Inesoft phone program?? Can it solve these problems?
http://www.inesoft.com/eng/index.php

Audible alerts for missed calls?

Does anyone know of an app that will give a intermitant audible alert for missed calls, texts etc. So every minite will give a tone to alert of missed call.

Re-Remind
steveianson said:
shirreer
if you read the quetion, i want an INTERMITANT tones that alerts me. I want to be able to vary the time between alerts.
Click to expand...
Click to collapse
I believe that a piece of software available on these very forums called "Re-Remind" should be what you are after!!
http://forum.xda-developers.com/showthread.php?t=498161

phoneAlarm
check out phoneAlarm (http://www.pocketmax.net) -- everything you need and more...

I use S2U2, works fine!

tested
one day of testing
ReRemind - remidners are not working, problems with unistalling (programmer whos leaving starting icon in windows startmenu after unistalling process, probably made more mistakes inside program code)
s2u2 - slows device, to big app for such simple functions
PhoneAlarm (trial) - vibration reminders works quite well, but freezes system when phone in lock mode, program have good function like notify for instant messaging
thats it, no more programs for reminding?
best regards

g-profile
Another solution.
Do not affect system speed. Nice looking. Vibration remiders works how it shoulds on factory sofware. Unfortunately app is not freeware, but price is affordable (5eur).
Only one function is missing. Reminders for IM like in PhoneAlarm.
Any idea how to force Parlingo to:
1. flash LED when message recieved
2. work with g-profile (registry hack?) using vibra-reminders?

I have gone through this thread and cleaned up the off-topic posts. A reminder that members have two options when visiting a thread:
Option 1
Responding with helpful and constructive information as opposed to "use the search", "try Google", etc.
Option 2
Move on. There is absolutely no reason to respond in a rude tone or to make someone feel stupid ... it is not constructive and serves no purpose.
There seems to be a significant amount of animosity of late in the HD2 related forums. I'm not certain as to why this is, nor do I want to hear any reason for justification; what I do know is that it is unacceptable.
XDA is about bringing together folks who have similar passions about mobile technology. As the forum is accessed worldwide, you will encounter all types of folks from different walks of life; some of these folks will be extremely technical, others not. In all cases, it is the responsibility of all members to remain respectful of one another. We all have different opinions, we do not all have the same level of knowledge, and some folks are looking to feel like they are learning while trying to contribute.
If this thread is reported once more, I will be looking to suspend the accounts of all members who post off-topic comments. I would remind members that the best moderation is self-moderation.

Software / application configuration

Hello guys
I'm glad I can write you this message
I am a delivery person for the food application and for a few days I saw that I can no longer take orders
I understand that my colleagues use MacroDroid but I don't know how to configure it on my phone
I would like to set it well (even better than them, I trust specialists)
Can someone help me ?
In the end, it has little to do but give 3 clicks (similar to autoclicker) and optimize the phone very well.
Thank you very much