Is there an app that allows me to define the CAB install path in WM6.1? The built in installer is better than the one in 2003SE, but I still can't select a custom path. I used CabInstl in my old Magician, unfortunately that doesn't seem to work with 6.1. Any help? Otherwise, the Program Files folder would balloon very2 quickly.. Thanks.
Bump. Any help on these please ?
Related
Hi all,
I just sucessfully installed big storage on my O2 mini and was wondering how i can change the default directory to which my software installs. The software is Imaginet-arabitizer and it uses a PC-based installation. No cab files...
Help please....
help
you can only whether you want to install a program to a default location, storage or a storage card. it will ask you in the beginning of installation by ActiveSync. choose NO and install sonewhere else.. gl
Still no luck....
Unfortunately, this particular program does not use the active sync user interface for the installation....
Any other methods?
i saw a shareware program on the forums once that did that... wish i downloaded it then cause i cant find it again sorry .. thought id let you know its out there though.....
aidil916 - unless it's some kind of ROM update etc, anything that gets installed on the PPC must always use a cab file, even on PC based install. So, start the install, and does add/remove programs or something come up?
Either way, if it installs something to the PPC (i've no idea how the arabizer works), interrupt the installation or somehow stall it. Then use a program like Filetracer or even the XP search tool to find any cabs installed to your pc in the last few minutes. Track down the cab (usually in your temp folder, programs folder or activesync folder) and then take a backup copy of the cab. Then, copy that to your PPC..
Tell me how it goes.
V
aidil916 said:
I just sucessfully installed big storage on my O2 mini and was wondering how i can change the default directory to which my software installs.
Click to expand...
Click to collapse
Usually when you perform PC-based installation software asks you for target location but some programs are hard-coded with "\Program Files\ProgramName" path so they will fail to work if you place them to another locations, i.e. to Storage Card
For programs that don't allow you to change target location you can change their registry entries to correct their path from "\Program Files\" to "\Storage Card\Program Files\". Here you will also need to manually move your program to a new location (SD) using Explorer's copy-&-paste functions
ps: don't use cut-&-paste because some of your programs may be running and this will cause sharing violation errors
Example, I have program "ABC" installed at "\Program Files\ABC" folder.
1) Using Explorer I navigate to "\Program Files" and COPY "ABC" folder to clipboard
2) Now I navigate to "\Storage Card" and create folder "Program Files"
3) I open newly created folder "\Storage Card\Program Files" and PASTE my "ABC" folder from clipboard here
4) Using Registry Editors I search for "\Program Files\ABC" entries and change them to "\Storage Card\Program Files\ABC"
5) I do soft-reset. If after that program works Ok, I delete "\Program Files\ABC"
The software is Imaginet-arabitizer and it uses a PC-based installation. No cab files...
Click to expand...
Click to collapse
Check your activesync's installation location. You will find the cab file within Software name or company folder, like "C:\program files\microsoft activesync\ABC"
Cheers
aidil916 said:
Hi all,
I just sucessfully installed big storage on my O2 mini and was wondering how i can change the default directory to which my software installs. The software is Imaginet-arabitizer and it uses a PC-based installation. No cab files...
Help please....
Click to expand...
Click to collapse
There are 3 methods i use,
1st is download the CAB file if you can, copy to your PPC and install with a program called CAB Install http://www.s-k-tools.com/fp/viewtopic.php?t=44 which allows you to install the app anywhere you want.
2nd is to run the standard ??.exe PC installation file but without your PPC pluged in. After the ??.exe install file is finished it will normally produces a CAB file on your PC which will copy across to your PPC next time you plug it in. All you need to is to find the CAB file and manually copy it to your PPC and use CAB Install.
The 3rd way is to do the same as 2 above and then use an app called WinCE CAB manager which you can generally modify the CAB files standard installation directory to what ever you want to.
Hope this helps
Most software including PC based installs eventually use CAB files. For this I use a small program CabInstl.
Hi All,
Can anyone direct me to some usefull tutorials on creating custom CAB files for my SP5.
At this stage, i'm just trying to create an automated CAB that will change the homescreen to a bitmap of my choice.
I can manually dump the file on the device, but i'd like to put it into a cab file so it will automatically dump the bitmap set it as my homescreen.
any help would be greatly appreciated.
cheers !
Hi,
hope this will help u..
http://www.gpcarreon.com/?p=149#more-149
This tool is cool as well...
http://www.ocpsoftware.com/download.php?nm=cecabmgr&dlID=4
Thanks for the response guy's.
I've actually got the OCP CAB manager application.
But it doesn't work with Windows Mobile 2005 based CAB's.
Smart archiver doesn't support WM2005 CAB's either
I'm finding there is a lack of suppoort for WM2005.
I guess i'll just have to make them manually by compiling from an inf file.
Can anyone post a template inf file for the WM2005 OS ?
I can use that as a base, then compile the CAB with cabwiz.
thanks again.
keep pushing ,I want to know the same thing as you.
I tried so many way to open and edit file in Cab-files for WM2005.
Just some files that can be open with CeCABManager.
I am looking for the name of the software that lets you ask where to install a cab file in Windows Mobile 2003. I remember having a program like that but it got removed after a hard reset. Can anyone tell me the name of that program?
- TKN
Anyone got any clue to the software?
Look for CabInstl by SK Software.
But will this software allow me to pick a location for lets say if I am installing a program from an exe file from my PC? I remember the software I used did something what WM5 and WM6 does by creating a Program Files directory and not creating a folder for each program on the root of the Storage Card.
Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx
many activesync install exe's
can be renamed to zip and one can out the cab files
give it a try
Rudegar said:
many activesync install exe's
can be renamed to zip and one can out the cab files
give it a try
Click to expand...
Click to collapse
Tried that but no luck. I think this is not what i mean. I would like to turn this exe into a CAB and the key included. So when i install the Cab i don't have to register.
one would think the program maker took precautions to make that impossible otherwise your cab could be distributed as a pretty easy free version
you can try to single out what files it depend
on and make a cab file from cratchs
and if the exe or dll files got alter when the serial was given
that cab would be reg'd
otherwise you would have to find out what registries was altered in the
serial process and make a reg which which did those alterations
and get the cab file to run it
Most installations that require you to install through activesync end up leaving a cab file behind. Check Program Files\Activesync\SPB... for the cab file. If it is not there restart the installation but after you have executed the setup file leave it alone and search for the cab file again. I hope this is what you were looking for
ALL exe that install via activesync have a cab, some are hidden in the profiles temporary files, some auto-delete once installed, so leave the application hanging in the install and do a search for recent files and sort by date/time (remember to allow it to scan hidden and system folders). a lot go into the activesync directory, some go into program files, i have even found some that go into the internet explorer temp files, install, and then delete themselves. The most common hiding place is your computers profile temp folder --- typically found under
C:\Documents and Settings\PROFILE\Local Settings\Temp
just dig around, its not to difficult once you find the 3 most basic hiding places.
good luck.
Sponzert said:
Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx
Click to expand...
Click to collapse
You can simply download the CAB files from SPB site directly.
Sponzert said:
Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx
Click to expand...
Click to collapse
I have run into a similar situation where my installation was failing due to the huge size of a CAB file.
In my case, the size of the CAB was nearly 23mb and the free storage left was around 26mb. This made the installer fail as it ran out of space midway during the install.
I know one thing for sure was that the PC installers (Exes that would run on the PC that would extract the CAB on the device) would extract the CABs and put them in \windows\appmgr\install folder and would trigger the installer on the device.
So during my second attempt, when the device prompted for installation location "device or storage card", I opened up the explorer on the device (guess you can do the same thing with Windows Explorer since your would stay connected over USB using Activesync) and went into \windows\appmgr\install folder and made a copy of the cab to the storage card (you can copy to your PC as well).
Exited the installer and then installed the cab from the storage card and the installation went fine.
Not sure about how the SPB apps work since there are two options during the PC install. Trail or Registered version. Based on the option chosen, it would either extract the necessary CAB (either trial or registered). I hope it creates a "Registered" version of the app in the CAB after you follow the above steps.
Hope this helps.
PS: I wish that the standard install location on the device "\windows\appmgr\install" be changed to the storage card by some tweaks. So far not successful in finding/getting one.
vprabu said:
I have run into a similar situation where my installation was failing due to the huge size of a CAB file.
In my case, the size of the CAB was nearly 23mb and the free storage left was around 26mb. This made the installer fail as it ran out of space midway during the install.
I know one thing for sure was that the PC installers (Exes that would run on the PC that would extract the CAB on the device) would extract the CABs and put them in \windows\appmgr\install folder and would trigger the installer on the device.
So during my second attempt, when the device prompted for installation location "device or storage card", I opened up the explorer on the device (guess you can do the same thing with Windows Explorer since your would stay connected over USB using Activesync) and went into \windows\appmgr\install folder and made a copy of the cab to the storage card (you can copy to your PC as well).
Exited the installer and then installed the cab from the storage card and the installation went fine.
Not sure about how the SPB apps work since there are two options during the PC install. Trail or Registered version. Based on the option chosen, it would either extract the necessary CAB (either trial or registered). I hope it creates a "Registered" version of the app in the CAB after you follow the above steps.
Hope this helps.
PS: I wish that the standard install location on the device "\windows\appmgr\install" be changed to the storage card by some tweaks. So far not successful in finding/getting one.
Click to expand...
Click to collapse
Thank you, this did the trick for me. Installed en included the registration.
Welcome. I am happy that I could be of some help
vprabu said:
Welcome. I am happy that I could be of some help
Click to expand...
Click to collapse
Now i have everything in registered Cab-files on my SD-card. Now i can make the switch to WM6. I'm dutch and have a P3300 and i guess it will take some time before HTC wil come with a dutch WM6 upgrade, so maybe not the place to ask but do you now where i can find a original English WM6 for the P3300?
I have tried to open .jar files on the device and it's seemed to fire up some java platform that supports those files. it asked me something about where to install but there was only one option <root>
when I click install it installs and everything work well, but the problem is that I can't launch that java manager in any other way... I mean there is no "java" or "esmertec java" or anything in my programs folder.... Maybe some cleanup software like "sktools" deleted the shortcut or something ? How can I get it back ? Any other way to launch it? The application seems to work, the only problem is that I can't launch it...
I have htc touch cruise with the default rom.
PS:
Sorry for double post, posted in wrong section....
Thanks in advance.
if i were you i'd look for the midlet manager in \program files\
and use a tool like total commander to make a shortcut in \windows\startbar\programs myself
there is nothing relared to midlet maneger in program files folder either....
i even tried to search for files contzining "mid"... nothing relevant found.
Should that manager come preinstalled on the device ? As I didn't install anything... maybe I can reinstall it to get it fixed ?
Is there anywhere I can get that java manager from so I can reinstall ?
Just create a shortcut, that points to windows/java.exe
(at least that's where i found the app)
I don't have java.exe in windows folder :-(
Just found what you're looking for
windows/jbed.exe
gnick666 said:
Just found what you're looking for
windows/jbed.exe
Click to expand...
Click to collapse
Very cool that the TC includes the jbed midlet manager. Opera mini runs really well using it.