what does JVP error 120 mean? its a white screen... it wont turn on or off..it wont do anything. can this be fixed or do i have to get a new phone? im with Centennial wireless network.
this is erro of the system, reinstall new system ver. 4.5.0.55 or more, search on google for more information.
have a nice day!!!
Related
Hi all i hope you can help me, i have a rc8 which i wanted to root so i followed this tut http://forum.xda-developers.com/showthread.php?t=442480 , everything went fine until i upgraded it 2 the patched rc8, now it wont let me sign in using my account details. says that it cant communicate with google servers.
Ok, Since my last post iv tryed flashing it again and again with both rc7 and rc8, and im still getting the same problem. it wont let me sign in to google, i cant connect to google server, so im guessing 3g's not working on my phone as the 2 little arrows arnt flashing, iv also tryed different apn's with no luck.
You should check to see if Data roaming is enabled or not, sometimes if it is disabled the phone wont connect to the data network. After a system update/downgrade. This happend to me after i downgraded my G1.
Just reboot the phone, try to login and you should get a message saying you have no data connectivity (or something like that, its been a while since i messed with that) then just enable 'Data Roaming' and try again. It is important to wait for the message concerning connectivity to appear as i belive it is the only way to access that menu(correct me if im wrong).
It is ofcourse also important to make sure you have all the right APN settings and whatnot right first. Good luck
Hi Seanambers, thanx for you r reply.
I have no way in checking or changing the roaming settings on my phone, as im at the signing on screen all im able to do is create a google account to sign in with, use my current account to sign in with and change my apn's. I really dont understand whats happened. iv tryed my sim in my old phone and the data services are workin.
Well yeah, thats kinda what i mean there is no way to change the data network settings before you have logged in unless this dialog pops up. I am not familiar with the UK firmware but on the US firmware it gives you a message about connectivity where one is able to access the network menu and enable Data roaming.
You should note that this connectivity dialog dosent always appear at least from my experience, but when i rebooted the phone and after 1 or 2 attempts to login in it appeared.
This may not even be the solution to your problem if you can see a edge symbol og a 3g symbol on the status line then this isnt gonna change anything for you.
If you still arent able to get it to work did you buy it at a store? If so flash the original RC7 onto it and take the phone to them and ask if they can fix it =)
Good luck
Cheers =)
hey again, is there a way to compleatly restore the phone to rc8 uk i mean so it reinstall boot recovery system every thing, if not ill try rc7, also link to said files would be nice, thank you
Had the same thing with connecting to google servers, but I found out it only works when I'm on GPRS. 3G somehow wouldn't let me connect, but when I got into the phone it worked again (I think). I have wifi at home, so I'm usually on that. And there was a time when 3G completely stopped working. Only GPRS worked. I installed RC8 (had RC30) and after a few tries it suddenly worked. I don't know I had 3G or GPRS when I connected to google servers. But you should try.
Also, I think there is a way to connect to the servers using wifi. But it's messy and you have to have root. I read it somewhere on the forums (activate without dataplan or smt)
You can bypass the registration screen. Read this:
http://forum.xda-developers.com/showthread.php?t=452316
yeah i looked at that, but dont i need to have usb debussing on for adb to work.
I have an 8125 laying around that I'd like to turn into a ZuneHD type device..
No phone, no text message, no mms, no email, etc..
Keep WiFi, PIE, games, media player, etc..
Is there a good ROM of choice for this?
Thanks
-Matthew
Here, try this one:
http://forum.xda-developers.com/showthread.php?t=501941
When I try to flash a rom:
when the phone resets to get to the 3-color boot screen, my computer loses sync with it and the RUU program locks up.. How do you keep your computer connected so it doesn't think it has been unplugged?
Even though it is still plugged in and I see USB over the left softkey, when I restart RUU, it then locks up when it is trying to scan my phone (it doesn't see it I guess)..
I'm on Vista Ultimate 64..
How do I get around this?
Thanks
-Matthew
I finally just pulled out my old XP machine from the attic.. Much quicker, nothing in Vista worked..
However, even after the RUU ran, the phone booted right back into the old OS..
?
EDIT: got it!
Now to put that 4G miniSD card in and fill it with tunes..
Is there a way to totally disable the phone functions altogether? Right now it boots into the dialer saying 'no SIM card'.. I would rather have it go straight to the WM6.5 today screen..
-Matthew
Hai people,
Im new here and i got a problem with my HTC Hero. Ive got it rooted to FroydVillain through this site and it worked fine for quite a while. But since thursday my phone flipped.
My trackball keeps lighted on, whatever i do. My battery runs low in like 6 hours...normally i did a whole day with it.
When i plug the usb cable it doesnt connect to my computer, it only starts powering up the battery. If its connected with my usb cable and i remove the battery the trackball starts flickering instead off burning all the time.
I didnt know what was going on, so i tried to do a nand restore in the root menu. After that i still had problems with the trackball and it still doesnt connect to my pc. Then i tried a factory reset in the root menu, but the problems are still there.
It doesnt let me get into the mobile network settings either. It doesnt find my provider and cant change it, so at the moment my whole phone is useless
Im quite new with this whole rooting thing, so i might have messed it up now? I hope some people know a solution for this. Please dont throw to geeky stuff to me, because i might not understand it
My software settings are this according to the phone:
Firmwareversion: 2.1 update1
Smallbandversion: 63.18.55.06PU_6.35.15.11
Kernel-version: 2.6.29-063c4d24 htc-kernel(at)and18-2 #1
Build number: 3.32.405.2 CL 191507 release-keys
Softwarenumber: 3.32.405.2
Browserversion: webkit 3.1
Any help is welcome! Thanks in advance
I have tried to fix it myself cause i didnt get any responds yet, but without succes. I got it to restart again in the original htc version, and get the setup menu where u can set your country, wifi connection etc...
It doesnt recognize my sim card though, and doesnt find a provider because of that. When its finished with the setup menu its at the 'normal' home screen. But as soon as it turns black as the screen saver i cant get the screen on again.
The trackball also still keeps burning.
I went to my local phone repair point, but they dont do androids :S its for nerds he said -_-
Im getting hopeless...plx could some1 tell me what to do. I want a whole reset off the phone...i dont care losing information on it. But because i cant connect it with my computer i have no idea how to flash a rom on it
Hi!
So I have a Galaxy S6 which came with a Dutch T-mobile package. On my way to China, where I moved a few weeks ago for an indefinite period, I cracked the screen and brought it to the local repairman to fix. That went perfectly well, but the phone didn't recognize my fingerprint anymore and I forgot my backup password. That's why I performed a factory reset, and that's where the real trouble began.
After the reset, I tried setting up the phone again, and got to the Samsung reactivation screen. I entered my account info, and provided the password for the wifi, after which the phone connected to wifi (with the corresponding message), but after a few seconds I get a pop up message saying "Unable to connect to the Internet" - even though the wifi symbol would still flash its arrows in the upper right corner. Thus, I can't get past this screen nor in my phone, which is quite a devastating fact as a poor new expat in China . Tried several other wifi networks, to no avail.
My guess is that it's the Great Firewall of China acting here, somehow preventing the phone to connect to the Samsung (and/or Google) network to check my info. I don't know if this is correct, the Samsung helpdesk couldn't say for sure as well, but I really really want to find a workaround here. Once I get the phone working again I can install a VPN to have the Google stuff working in China, but this way I can't get to that point. Now I am completely new to rooting/ installing ROMS and the works, but I am willing to try anything to get this expensive piece of electronics to work out here.
Any helping comment is an absolute lifesaver, and I will name my firstborn child after you!!
Thanks so much!
All the best, Maarten
EDIT: I made some screenshots, but appearantly I am not allowed to post outside links yet.
Hello!
I got a Lumia 1020 from Amazon because I was feeling nostalgic and wanted to try it. Unfortunately the WiFi and Bluetooth do not seem to work. Already during the initial setup of the phone when it wants you to connect to a network it just shows the drop down menu with when you want to turn it back on. After the setup process is done and I go into settings to try and turn on the WiFi toggle, it just immediately says 'Can't do this right now'. Likewise, the Bluetooth toggle is just completely greyed out.
I tried soft resets, hard resets, reset by WDRT and reset by flashing an original FFU via WPInternals, but no joy. Any other suggestions before I contact the seller and tell him he sold me crap and see if I can get my money back? It's fine to use it as a camera only, but no wifi or internet whatsoever to update some apps, including Lumia Camera is a bit silly.