Related
Hey Mates,
I was looking through my \windows\startup folder and I noticed a few .lnk files, some of which I didn't know what they were for. If I can determine that they aren't neccessary maybe removing them could speed things up a little. Here are the links I have so far:
AEBPlus.lnk - this is a great button mapping prog
PKG.lnk -???
poutlook.lnk - Pocket Outlook, I'm guessing it needs to be there
sddeaemon.lnk -???
spbmobileshell.lnk - SPB mobile shell obviously
I was also wondering if I removed poutlook will activesysnc stop running on it's own. I tried the sched trick to keep it from running all the time but that doesn't seem to work. I shut it down and then it keeps showing up in the task manager. Thanks in advance to any help, Cheers!
Hi,
Here you have informations about startup folder.
@+
Jules Winnfield said:
Hi,
Here you have informations about startup folder.
@+
Click to expand...
Click to collapse
That link is for WM Standard, not really applicable in this situation.
The Sddaemon is most likely the drivers to recognize your sd card.
As for Activesync you can try the following:
If you go into settings/System/Memeory and check what programs are running your more then likely will see active sync. This is due to the following fact: ActiveSync on Pocket PC side with its default settings does following - Pocket PC ActiveSync activates itself every five or ten minutes and tries to sync with the desktop.
So if you dont want your battery to be drain again, you need to prevent the ActiveSync from waking up the device every five minutes. To do this read the lines below and follow the instructions:
1. Start ActiveSync on your Pocket PC.
2. Tap "Menu", then "Add Server Source"
3. Configure a server source with a fake IP address, id and password - you can enter anything you like, it doesn't matter
4. After that you will notice that "Menu -> Schedule..." item is no longer greyed out.
5. Change your schedule to manual under both fields.
6. You can now delete your fake server - your changes to the schedule will remain in effect. ActiveSync will no longer be able to drain your battery.
Also make sure your error reporting is turned off.
Start/Settings/System/Error reporting.Set it to disable error reporting and save more battery life
HTH!
JNGold said:
That link is for WM Standard, not really applicable in this situation.
The Sddaemon is most likely the drivers to recognize your sd card.
As for Activesync you can try the following:
If you go into settings/System/Memeory and check what programs are running your more then likely will see active sync. This is due to the following fact: ActiveSync on Pocket PC side with its default settings does following - Pocket PC ActiveSync activates itself every five or ten minutes and tries to sync with the desktop.
So if you dont want your battery to be drain again, you need to prevent the ActiveSync from waking up the device every five minutes. To do this read the lines below and follow the instructions:
1. Start ActiveSync on your Pocket PC.
2. Tap "Menu", then "Add Server Source"
3. Configure a server source with a fake IP address, id and password - you can enter anything you like, it doesn't matter
4. After that you will notice that "Menu -> Schedule..." item is no longer greyed out.
5. Change your schedule to manual under both fields.
6. You can now delete your fake server - your changes to the schedule will remain in effect. ActiveSync will no longer be able to drain your battery.
Also make sure your error reporting is turned off.
Start/Settings/System/Error reporting.Set it to disable error reporting and save more battery life
HTH!
Click to expand...
Click to collapse
Thanks JN,
I tried the fake server method but activesync still seems to start up on its own. Does windows live or gmail need to call it up when they sync? it seems the polaris is the first device I've had that persistently keeps activesync running even when i shut it down.
btw, my sd card was still functional even when i removed sddaemon.lnk from the startup folder and did a soft reset??? weird. We still don't know what PKG.lnk is either.
@gatordent,
My mistake, the Sddaemon is the Cyberon voice speed dial that comes with most HTC devices.
As for AS, I don't use W.Live and do you have google mail set for auto mail retrieval? Maybe when the device goes to get the mail at your specific time, AS launches itself?
JNGold,
Alright, here is what I've done, I removed sddaemon.lnk AND PKG.lnk from startup and left the others. So far, so good... seems to have saved about 3% of memory upon soft resetting. I left outlook.lnk b/c messaging broke when i tried to startup without it. AS still starts on it's own immediately after a soft reset. The TC is definitely a little peppier.
JNGold said:
As for Activesync you can try the following:
If you go into settings/System/Memeory and check what programs are running your more then likely will see active sync. This is due to the following fact: ActiveSync on Pocket PC side with its default settings does following - Pocket PC ActiveSync activates itself every five or ten minutes and tries to sync with the desktop.
So if you dont want your battery to be drain again, you need to prevent the ActiveSync from waking up the device every five minutes. To do this read the lines below and follow the instructions:
1. Start ActiveSync on your Pocket PC.
2. Tap "Menu", then "Add Server Source"
3. Configure a server source with a fake IP address, id and password - you can enter anything you like, it doesn't matter
4. After that you will notice that "Menu -> Schedule..." item is no longer greyed out.
5. Change your schedule to manual under both fields.
6. You can now delete your fake server - your changes to the schedule will remain in effect. ActiveSync will no longer be able to drain your battery.
Click to expand...
Click to collapse
Thought I'd try this but how do I 'delete' the fake server. There's no such option that I can see. Am I just being thick?
Circumvent Device Lock in Blackberry Connect for Windows Mobile
---------------------------------------------------------------
Description:
------------
BBC features a security module that, if configured and activated, locks the device after a specific amount of time.
In a corporate environment this is usually set up by a security policy which is pushed to the device via Blackberry Enterprise Server (BES).
If the device is locked the user has to enter a password to unlock the device again.
There are two ways a user can compromise the security implied with the BBC security service.
1) Using a task manager a user can deactivate the BB security service (bbsecurity.dll) which is responsible for enforcing the security policy. The BB service itself is not affected by stopping the security service as long as the device is not rebooted. Thus the security policy is no longer enforced but the user is still able to use all other BB features.
2) The BB security service does not block all user actions during device lock. Only the screen overlay is enforced but applications might still be started using hardware keys. There are several ways to misuse this flaw. One for example is if a voice command software is installed, the user can still send voice commands to the device. If Microsoft Voice Vommand is installed and bound to a hardware key and the device gets lost or stolen a malicious person can press the voice command hardware key and ask for upcoming appointments, dial numbers etc. which leads to information leakage.
Affected:
---------
Blackberry Connect (BBC) for Windows Mobile PocketPC 4.0.0.97 (only version tested, but suspectable all currently available 4.x versions)
Not Affected:
-------------
Blackberry Connect (BBC) for Windows Mobile PocketPC 2.x
Workaround / Fixes:
-------------------
None
Vendor Contacted:
-----------------
14.05.2008
Vendor Response:
----------------
None
How to deactivate it?
Hi,
I am looking for long time how to deactivate this security feature and would be interrested how to schedule with a task scheduler the dll??
Could you please advise how to do this?
Thanks
jsimpson said:
Hi,
I am looking for long time how to deactivate this security feature and would be interrested how to schedule with a task scheduler the dll??
Could you please advise how to do this?
Thanks
Click to expand...
Click to collapse
You cannot deactivate it completely since the policy is enforced after each softreset. As I wrote you can use a task manager to stop the service, but you should under no circumstances stop it permanently because your device will not come up anymore if the service is completely disabled.
So to get back to your question; No, I cannot tell you how to do it with a task scheduler as the only way I know is using a task manager.
One can write a small utility to stop the service and after a softreset one can run this program to avoid using a task manager for that, but AFAIK there is no such program.
mmm After being happy when I put the WWE HTC rom on my TMO Vario IV and after managed to install and initialize Blackberry Connect .103 I got disappointed when the BB security lock came in the first time.
I cannot set the lock-timer higher than 15 min.
Its extremely nasty when I am driving using Tom Tom navigator.....have to type the password every now and then (I have the feeling not exact 15min's!).
I tried the stop-service trick, but that one appears non working with (at least) BBC version .103 and .104 on my device.... Without running BB security service the device wont wake up or soft-reset itself.
Has anyone encountered these new issues with BBC 4 security lock and has anyone found a solution yet???
Was thinking to let the security lock active (preventing my device from locking up or soft-resetting spontaneously) and to build a script that runs in the background checking whether or not the security lock screen is present. And once it is...pastes the security code in the box and pushes OK.
Does this sound do-abe?
edsub said:
Was thinking to let the security lock active (preventing my device from locking up or soft-resetting spontaneously) and to build a script that runs in the background checking whether or not the security lock screen is present. And once it is...pastes the security code in the box and pushes OK.
Does this sound do-abe?
Click to expand...
Click to collapse
Do the same for GOODLINK and you got a deal!
Well I managed to fix this like I mentioned.
Attached are 2 Mortscripts that to run in background from \Program Files\Mortscript
(I have a shortcut in \Windows\StartUp to make sure it is run when my devices is reset, so i do not have to start it myself after every reset, but thats optional)
The 1st script is for general purpose: It just makes sure you will not be bothered again by the BBC security screen
The 2nd script only works when TomTom navigator is active.
You simply choose which script suits your needs best. Both can be run at he same time also I suppose.
The 1st script, BBCUnlock.mscr, simply waits for the security screen, sends the appropriate keystrokes (leftsoftkey, password, leftsoftkey) and restarts itself (to wait for the next security screen popup).
Beware:
1. Enter your own password in the right placxe in the script before using it.
2. Comment-out the last line until you are absolutely sure the script works (remember: 10 wrong passwords deletes all BBC data on your device!!)
It runs in a couple of seconds (which you see happening)
The 2nd script, NoLockTTNVGA.mscr, only works when TomTom Navigator is running: Every 10 minutes it taps the zoom-in and zoom-out hot-spots in TomTom's 3D view (based on VGA resolution!!), before re-launching itself again. This makes the security time-out will never happen as long as TomTom is running.
Update:
The NoLockTTNVGA script works flawlessly, but only fixes the issue when TTN is active
The BBCUnLock script has some glitches. Apparently it locks up my device when
- a reminder 'stays active' for some reason.
- TomTom Navigator is active (but that can be fixed whith the other script!)
The script can be run simultaneously. And when you have TTN: for now they must!
Not sure how to make the BBCUnLock script more stable, any help appreciated.
Hi edsub,
Thanks for your efforts so far. Up to now I have used MemMaid in my startup files so that after a soft reset, I have to firstly unlock the Blackberry and secondly the MemMaid then kicks in and I disable Blackberry Security in Startup Services. This means the security is overridden until my next soft reset as you already know. Therefore, I don't need to install the mortscript for TomTom.
However, I am particularly interested in the other mortscript you have given. I want to be able to simply soft reset my Diamond and then just leave it, without having to (1) input my password and then (2) disable the Blackberry Security in MemMaid.
I think your mortscript is possibly the answer to my prayers.
However, I have installed it to my device and also installed MortScript v4.3.0.2 Beta. I am concerned that (1) I am a beginner & this is too advanced for me and (2) running mortscript will eat up my battery.
I have renamed the extention on your file with .doc and input my password overwriting the appropriate parts) on my desktop and then renamed the extention back to .mscr and then installed in the MortScript folder back on my Diamond.
In MemMaid, I have put the Mortscript and Autorun .exe's into the Startup Items section, so this should run after a soft reset.
However, my Diamond does not unlock itself. What am I doing wrong?
I really appreciate any help you can give me. I am very much a newbie with this program!
I am persevering with this, but cannot get it working. I have put a shortcut for Mortscript.exe and the BBCUnlock.mscr into my Windows Startup folder using MemMaid. I have also tried to change the order of the programs starting on MemMaid, but this does not seem to have any effect on inputting the password. I have obviously changed the word "secret" to "mypassword" in the BBCUnlock.mscr file. I have also tried just putting the BBCUnlock.mscr (without the Mortscript.exe) in the Startup folder.....
I would appreciate your help edsub...
Update:
I have managed to get the BBCUnlock.mscr work during normal operation, but it does not work for the password immediately following a soft reset (it does work thereafter).
This is already a huge improvement as I don't need to then disable the Blackberry Security from MemMaid following a soft reset. However, how can I get it to work for the password immediately following a soft reset?
Please help edsub!!! This is the final ingredient to my perfert Diamond!!!
I think the Mortscript does not run until AFTER the Blackberry Security has been unlocked for the first time following a soft reset. I have tried to change the order of the shortcuts on MemMaid, but haven't managed to succeed. Can anyone offer any help PLEASE???
I have tried some more things too:
Added in a sleep timer of 5 seconds from sensing the "owner information" to pressing the left soft key and also increased the time from pressing the left soft key to inputting the password. It works great in normal mode, but still doesn't work for the single password required immediately following a soft reset.
Also I have tried to put not just a shortcut into the startup folder, but the actual mortscript itself. Plus the shortcut!
I can't believe there aren't more people with this problem. Edsub has certainly created a wonderful mortscript here. It is nearly perfect and I'm sure others would want it if it worked for ALL password inputs required.
Can anyone please help????
I guess Mortscript is not running before the password is given for the first time. I have this behaviour too. So i have to give the password myself right after reset. After that the Mortscript takes good care of it.
edsub said:
I guess Mortscript is not running before the password is given for the first time. I have this behaviour too. So i have to give the password myself right after reset. After that the Mortscript takes good care of it.
Click to expand...
Click to collapse
Hi Edsub, nice to see you back! Thanks for the reply & PM. Your Mortscript programme is still the most important programme on my device! I did try to re-order the start up processes on SK Tools so that the mortscript would start before the Blackberry security, but I couldn't get it to be more important in this way!! Now I have a Diamond 2 and am hoping not to have to soft reset at all. I have another problem now - I can't seem to get BBC working at all on this phone, but that's another story.....
EdSub, as you are my hero for getting the Blackberry security to sort itself out via your Mortscript programme, I wonder if you can write another Mortscript programme for this: http://forum.xda-developers.com/showpost.php?p=4381321&postcount=89?
I would be very grateful!! I think other Blackberry users would be too.
Hi,
Maybe the question is idiot, but reading the first post, I was wondering why not create a small script which would simply deactivate bbsecurity.dll on startup... If I read it well, doing this once would be enough, and have no impact on the BB service itself...
Using a small sleep, it would be easy to put this script directly in the windows startup folder so that the sleep leaves enough time for the dll to start, and then deactivate it...
Isn't this possible?
Thanks
bbdoc said:
Hi,
Maybe the question is idiot, but reading the first post, I was wondering why not create a small script which would simply deactivate bbsecurity.dll on startup... If I read it well, doing this once would be enough, and have no impact on the BB service itself...
Using a small sleep, it would be easy to put this script directly in the windows startup folder so that the sleep leaves enough time for the dll to start, and then deactivate it...
Isn't this possible?
Thanks
Click to expand...
Click to collapse
Edsub already did this with Mortscript. It doesn't de-activate it completely, just senses when the code is required and then enters the code. I would like a script which does what you are suggesting.
mitsi said:
Edsub already did this with Mortscript. It doesn't de-activate it completely, just senses when the code is required and then enters the code. I would like a script which does what you are suggesting.
Click to expand...
Click to collapse
Yes, I know this script, and I'm using it... It's working quite good, even if it sometimes misses the code, don't know why... but I'm a bit worried about battery consumption linked to the fact a script is constantly running only for typing this password every 20 minutes... Deactivating the dll would probably be a more efficient solution, but maybe this is not possible using mortscript...
bbdoc said:
Deactivating the dll would probably be a more efficient solution, but maybe this is not possible using mortscript...
Click to expand...
Click to collapse
You can use the attached program to stop the service. Just execute it and the service will be stopped. However, you have to do this after each softreset. I recommend to wait until the connection is established to the RIM network and then use BBStopSec.exe
Hope this is what you were looking for.
That's indeed what I was looking for... I'm just surprised it's an .exe and not .mscr...
Is it something you compiled yourself? The idea I had with the mortscript was to add a sleep before stopping the service, because this way, I can simply put it in my startup folder and it will launch automatically after a soft reset... As far as the first lock screen will only come after 20 minutes, I could even put a sleep of 10 or 15 minutes before stopping the service and I would never get my screen locked...
Yes, i know i can do it manually clossing app (QuikMenu, synckill, etc.). Also i´ve tried in Notifications inTaskMgr excluding: replog.exe -->AppRunAfterTimeChange .. without success. Actsync for some strange reason always start up in a few minutes. Really is ennoying. I need KILL actsync when i don´t need it !
Please, any way to kill actsync?
I have WWE 6.1 in a Mio A701 (20931 M2D cooked)
THANKS A LOT
Frank
You could use mortscript never tried it, but in the manuals there is a "kill" function to close a application
9.21.6 End a running process (Kill)
Kill( process name )
Terminates the application. The parameter must be either the name of the exe without path (e.g.
solitare.exe) or include the entire path. Like with ProcExists, you should prefer the version without
path. See 9.21.2 Checking existence of a process (ProcExists) for more details.
WARNING: This command kills the process regardless of any losses!
It could cause data loss, crashes, or error messages.
Wherever possible, you should use Close instead, which allows the application to end gracefully
(save/close files, etc.).
from: http://www.sto-helit.de/downloads/mortscript/MortScript-Manual.pdf
You could also try quickmenu (it's somewhere around these forums), it has an option to automatically close activesync.
Thanxx..
I know that these options let to kill activesync, but manually, by press soft or hardware button. Now i have assigned a buttont to Close-all-app in QuickMenu and other hardbuton to execute SyncKill app that does te same, but only for this process. My "dream" is to see closed actsync automaticaly after disconnection on pc and don´t see again process active (i suffer also to see screen turn on every time actsync enable it without motive). When i plug device to pc must connect again, of course.
I´ll try again option in QuickMenu called "Close Actsync when disconnect Pc". I think i tried it but didn´t work me. Maybe works me now in my actual ROM.
Frank
try async killer here....
http://forum.xda-developers.com/showthread.php?p=2136914
Yes. I know.. In first post i´ve said that KillSync (async killer app) let me do the same action than QuickMenu (close all app). It´s a manual action by hardware button. I wish to do automaticaly but i don´t find solution.
Option in QuickMenu called "Close Actsync when disconnect Pc" don´t work too. After some minutes, f**** actsync proccess appear again, grrrrr...
Thanks for your atention!
Fk
There's a solution in KhanX's Touch Navia 1.5 ROM thread in the polaris section.
it's in the FAQ if I'm not mistaken.
I´ve searched in post u say and it´s the same async killer app that i said in first post. This app kill proccess when you execute it but in a few minutes, actsync appear active again. I must to press Asynkiller again (or close all app in QuickMenu). Uhmm, mb a morscript that execute asynkiler every...10 minutes?
Thanks friend!
no no.. there's a registry solution there.
Yeah, just found it..
http://forum.xda-developers.com/showthread.php?p=2921549&highlight=sync#post2921549
Second option (replloc.exe notification i have dissabled it some time ago without success). First option in regitry is a new solution but don´t work. Actsync appear again, again, again, grrrr. I will cut my veins with a comb..
Thanks again. I´m sure finally i´ll find solution in this forum. It´s the best!!
Frank
Activesync periodically starts itself and hogs your PocketPC's precious resources. To prevent this from happening you can do this trick.
--
1. Open Activesync
2. Menu > Add Server Source
3. Add Server address [one letter will do] > Next
4. Fill in the fields [again one letter will do] > Next
5. Un-check everything [optional] > Next
6. Really Close Activesync [optional but recommended]
7. Open Activesync again
8. Menu > Schedule
9. Choose Manually for both
10. Close Activesync
--
Activesync should start when you connect your device to a Computer but will not start periodically and use resources.
--
Hope this helps... ^_^
WOW... I try this trick inmediately...
Yeah! Finaly, it seems this trick works ok !!
Thanks a lot
Frank
Thank you sakshamkatyal.
I have this issue with every ROM.
I have a Μιο Α701 like mainsail, so if this a solution for him,
it's for me too.
do us all a favor and don't cut your veins with a comb.
tho... it would make a good laugh cause on your headstone we could write:
"XDA-Member - died due to ActiveSync problems"
That´s an old joke from south of Spain (traslated to english), haha..
You have saved my live !!!!
This is a cool trick. I wanna do this but I'm wondering if I need activesync running in the background for push email to work? I'm using Mail2Web.
Thanks.
So I'm using the native PPC calendar (WM 6.1), mostly because I really do not need anything more fancy. I like it's simplicity and the today plugin is a must for me.
There are two things that annoy me though:
1. When I have an upcoming even alert, there is a snooze option. However, I can only snooze it: 5 minutes, 10 mintes, 15 minutes, 30 minutes, 1 hour, 1 day. Is there any way to modify these selection. Ie. if I wan to snooze 4 hours there is no other way but to snooze 1 hour, and repeat 4 times after the hour have passed. Really annoying.
2. Any way to disable alerts during calls?
3. Is there any app that would work in mass storage device mode NOT IN ACTIVE SYNC MODE, that would allow me to modify the calendar entries from my PC.
What I mean is that I would like to connect the phone as mass storage and somehow open calendar entries file (of course it would have to be somehow moved first from the main drive to the storage card first, of course), and modify entries on with PC keyboard.
I do not want any syncing programs. I've had enough with them. Entering the file directly on the phone would be the best option for me. I do it like this with my to do lists created with Listpro program and all my syncing problems disappeared. If I want to do some major to do list editing I stick my phone into the cradle in mass storage mode, open Listpro app on my PC (listpro has PC and PPC app) and edit the list directly on the phone.
P.S. I hope I am not duplicating subject ... had some problems with connection
Anyone???????????
Is this forum dead?
Having a crazy day. Got the new ChevronWP7 unlock last night. Did the internet sharing interop combo. Now get error trying to reload xap files. Trying to put on accentchanger file.
Error - failed to connect to the device. Ensure that the device is connected..
The xap app is not supported
You have to deploy supported xap only
Ex:
Screen cupturer
Nokia maps
Battery status
Tango, but it is now in marketplace
Some other apps like Native keyboard are not working.
Good luck.
Sent from my 7 Mozart
@verynuclear: Not sure what you think you're trying to say, but it's totally possible to use high-privilege apps like Advanced Config (which does custom accent colors, among other things). You just need Interop Unlock, which is easy on LG, possible (via an app) on Samsung, and difficult but not impossible on HTC (I have it on my HD7).
The problem is that after using the Interop-unlock app on his or her Samsung phone, the OP seems to be having trouble with the XAP deployment tools. @jgibo, I suggest you read and then post in the relevant threads for those apps, rather than starting a new thread.
The main reason for asking question is if the deployment tool stopped working for anyone else. After I got Chevron on there I was able to install screen capture, accent changer. Screen capture worked. So I removed accent changer and followed instructions for interop unlock install. Then saw the thread for internet sharing and interop in one. Installed that to phone. Got internet sharing Then tried a few different xap files and couldn't install any. So did that xap mess something up? Guess I will look elsewhere for answers.
This is all they have on MSDN site.
--------------------------------------------------------------------------------
This can be caused by several reasons, including if the device is off. If the device is already connected, sometimes disconnecting and then reconnecting the device may fix the problem. Rebooting the device may also fix this problem
You do have internet sharing OFF right? You can not deploy XAP's with ICS on. I don't mean to be rude but it really does pay to read the whole post when someone gives instructions on how to do something before saying it messed up your whatever.
voluptuary said:
As long as your device is unlocked in some way (Developer/Chevron/Other) you can get internet sharing on your Samsung phone.
1.) First install the WP Dev Tools and unlock your Samsung phone.
2.) Use the Application Deployment tool to send THIS to your phone. You do not need to run it and you can delete it after it has been deployed.
3.) Install the Diagnosis app by typing ##634#
4.) After the Diagnosis app starts type *#9908# and select 'System Tweaks' press 'Save' then 'Close' and RESTART your phone.
5.) Your phone now has internet sharing and as a bonus is interop unlocked!
PS: You need to have a recent firmware on your phone or your diagnosis app and drivers will not be new enough to work.
EDIT: I built the file depoyer app using the tools provided by Heathcliff74 so many thanks to him! Also ADC is built in as well so no need to worry about that and I also upped the max number of connections from 3 to 5 devices.
NOTE: If you have internet sharing turned on (active hotspot) you will not be able to deploy XAP's untill it is turned off. Also, as with any xap, you need to have your screen unlocked to deploy.
Click to expand...
Click to collapse
Of course if you have ICS off then I'm sorry for this little rant and all I can suggest is restarting your phone and PC and trying again.
ICS is and was off. Found other posts with same message. Currently reinstalling dev tools. I do IT support for a living and hate havinng to do troubleshooting on my own stuff From past experience with computers it is either a coincidence or cause when a new problem occurs. Hence the questions asked. I do remember seeing an odd usb error in system try when I was doing step 4. Did a troubleshoot on my Focus connection but that didn't help. Also tried all usb connections. If the reinstall doesn't work will have to get my htpc out and try on it.
Reinstall didn't work. Since it stopped after running system tweaks I am trying again. Wish the instructions had a note on how long after hitting the save button before it was done. Has the Loading GPRS Profile for System Tweaks on screen. I think I may have hit the close button yesterday while is was still showing Loading. Right now I am not touching phone till I see it go away. Unless you are supposed to hit close right after hitting save.
The settings are applied almost instantly, as soon as it says loaded after you hit save then you can hit close and restart. Another user stated they had to turn ICS on then off again before he could deploy XAPs. Another question, you haven't turned on wired tethering have you? I ask because if you don't set your phone back to Zune sync you also will get the error you are getting.
EDIT: Main question, does Zune see your phone when you plug it in at all? Can you sync media? Cause if you can't you have another issue that is beyond anything my XAP could have done.
That kind of worked. Turned on ICS then back off. Got Advanced Config to install. Now get UnauthorizedAcessException. Click ok and app closes. Go from one issue to another.